[Flexradio] Power SDR 2.35 Unhandled exception with RX2

I recently updated to PowerSDR v2.3.5 from v2.0.16. Everything seems to work well until I active RX2, at which point I get an Overflow error and am given the option to continue or quit. If I continue, the panadaptor display is replaced with a white rectangle with crossed red lines. Below is the

[Flexradio] Power SDR 2.35 Unhandled exception with RX2

Thanks to all who sent me the solution for my RX2 error. Resetting the database cured the problem. 73, Craig AE7I ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives:

Re: [Flexradio] How do you keep the house alarm from chirping?

I had the same problem with chirping smoke detectors and burglar alarm system when I operated with my amplifier. I remedied the situation by using snap on ferrite beads on each sensor and the wires into and out of the alarm box as well as at each control pad. Craig, AE7I

Re: [Flexradio] Pauses in cw character transmission

Update: I have downloaded PowerSDR 2.0.16, removed McAfee antivirus, loaded ESET Nod32 antivirus (much kinder in terms of system overhead), and am trying to trim my unneeded Windows 7 services. So far it has made a favorable difference in cw transmission, however my computer is still doing some

Re: [Flexradio] Pauses in cw character transmission

I appreciate all of the good suggestions and this weekend I will try the following: 1. Neal's suggestion: Turn off Windows Search in Windows 7 and modify the Windows Update to do not check all. It does seem as if another process is periodically working and causing a delay in the cw processing.

[Flexradio] Pauses in cw character transmission

Hello, I am a Flex-5000A user who has never quite become comfortable using it on cw. I am using it with a Dell Dimension E520 running Windows 7. It has 5 GB of RAM. I have tried using an external keyer (LogiKit CMOS-4) and recently the internal keyer, but have audio pops, glitches and delays

Re: [Flexradio] Pauses in cw character transmission

Tim, I left out some information on my original post (sent the wrong version of the two I wrote). To test things out I transmitted into a dummy load, 0 watts, and sent a string of dits. Sporadically, and not in a regular pattern, their are pauses. When sending cw, these sporadic pauses throw

Re: [Flexradio] Noise

Wayne, I have had my share of RFI problems and found the ARRL publications quite helpful. I read the book by Marv Loftness, but have heard good things about The ARRL RFI Book as well: http://www.arrl.org/catalog/?category=Interference/DF.http://www.arrl.org/catalog/?category=Interference/DF Have

[Flexradio] Benefit of dual receive

I would like to thank everyone for their responses to my initial post. I was pleasantly surprised with how many ways the second receiver could be utilized and am now planning to place my order. One thing is certain, this hobby of mine never becomes stale! 73, Craig, AE7I

[Flexradio] Benefit of dual receive

I may seem a little slow, but would like to know how others plan to use the new dual receive capabilities? I have the Flex-5000 and am considering the second receiver, but would like to know how it will benefit me. Is this just a contesting-oriented option, or am I overlooking other ways to

Re: [Flexradio] Processor Affinity for PowerSDR on Vista

After being frustrated with some of my sofrware not functioning properly on my Vista box, I activated the super administrator account (requires several steps which can be found with a Google search). Since then, I have been able to run all of my older XP programs without difficulties. After

Re: [Flexradio] Digital Mode Setup Question

problems. What you described should be working. -Tim -- *From:* Craig Sande [mailto:[EMAIL PROTECTED] *Sent:* Wednesday, March 19, 2008 12:22 AM *To:* Tim Ellison *Cc:* FlexRadio@flex-radio.biz *Subject:* Re: [Flexradio] Digital Mode Setup Question Hi Tim

Re: [Flexradio] Digital Mode Setup Question

] On Behalf Of Craig Sande Sent: Monday, March 17, 2008 11:54 PM To: FlexRadio@flex-radio.biz Subject: [Flexradio] Digital Mode Setup Question I am having difficulty setting my transmit level for PSK31 and wonder if anyone could help. I am using MixW with my Flex-5000a using PowerSDR v1.10.4

[Flexradio] Digital Mode Setup Question

I am having difficulty setting my transmit level for PSK31 and wonder if anyone could help. I am using MixW with my Flex-5000a using PowerSDR v1.10.4 SVN:2023. According to the instructions I should set MixW to TX and then adjust the TX level until the ALC is near 0 dB. However, PowerSDR (in

[Flexradio] CAT control with CommCat

Has anyone found the correct combination of settings to control the Flex-5000a with CommCat? If so, I would appreciate your settings used for both CommCat and the Flex-5000a. I am using virtual com port pair COM6 and COM16. When I activate the CAT control for keying, the Flex-5000 goes

Re: [Flexradio] CAT control with CommCat

I figured it out. I created a new COM pair for cw keying: COM3 and COM13. Now it seems to be working fine! Craig, AE7I www.ae7i.com On Jan 14, 2008 8:21 PM, Craig Sande [EMAIL PROTECTED] wrote: Has anyone found the correct combination of settings to control the Flex-5000a with CommCat

Re: [Flexradio] Capturing audio for website

Dudley, Thanks for your tips on using the 'Wave' function for recording and subsequent conversion to MP3 format. I followed your instructions and set the sample rate in PowerSDR Wave to 11025, post-processed receive audio, and pre-processed audio transmit. A 15-second recording of a SSB station

Re: [Flexradio] Audio balance test question

Dudley, When I run the Audio Balance Test, I have tried fully cranking up the Bose powered speakers (connected to the back of the Flex-5000) and the headphones plugged into the front panel Phones jack, but can't hear a thing from right or left channel during the test. However, when using the

Re: [Flexradio] Audio balance test question

That explains it Dudley!! I think that I have had enough exercise pushing that button! Thanks for clearing it up for me. 73, Craig, AE7I On Nov 11, 2007 3:13 PM, Dudley Hurry [EMAIL PROTECTED] wrote: Criag, That test really is for the SDR-1000, to help verify connection between the

Re: [Flexradio] Multiple tones on cw transmit or tune

my computer to my local network directly rather than go through a wireless Buffalo Air Station. Hmmm... its late now, but perhaps I will go back to my prior setup and see if that was somehow the cause. Anyway, I'm back on the air and having fun! Craig, AE7I On Nov 10, 2007 5:28 PM, Craig Sande

[Flexradio] Multiple tones on cw transmit or tune

Yesterday I worked a local friend on 40-meters cw. He was listening with his K3 and said my signal had a musical quality to it and appeared wide on a spectrum display. Listening closer, he thought that there was a main tone at 1500 and additional tones at 300 and 100 Hz (I'm not sure how he was

[Flexradio] Audio balance test question

My Flex-5000a receives fine via the speaker jack in the back and phone jack in the front, including the MuliRX and BIN options. However, when I use the Audio Balance Test, I can't hear any tone in either right or left speaker. Am I doing something wrong? Thanks, Craig, AE7I -- next

[Flexradio] Capturing audio for website

I have been able to capture and playback audio using the PowerSDR Wave File Controls, but when I open the file independent from PowerSDR and try to listen to it, I just hear some clicking sounds. In addition, some of the files are quite large and wouldn't really be appropriate for posting on a

Re: [Flexradio] Multiple tones on cw transmit or tune

I didn't notice any change when I toggled the 'SR' button and it was present to varying degrees from 60M through 10M. When I put my Kenwood receiver in AM mode, I could hear a 60 Hz signal on the carrier, so I think you may be correct about some form of ground loop. I disconnected everything

[Flexradio] Loss of receive with preserved transmit

On a few occasions, while operating cw, I have noted that the receiver suddenly goes quiet while the transmitter continues to work fine. It happened today. I pushed Stop and Start on PowerSDR without effect. I then shutdown PowerSDR and power cycled the Flex-5000a. When I restarted PowerSDR,

Re: [Flexradio] Loss of receive with preserved transmit

The QSK setting refers to the PowerSDR. There is also a QSK setting on MixW, but that only comes into play when using MixW to send code. I was keying the Flex-5000 using a LogiKit Keyer. Craig, AE7I On 10/31/07, Mike Schelly [EMAIL PROTECTED] wrote: Is there a QSK (TX?) delay setting in the

[Flexradio] Version number versus SVN

I have a Flex-5000A and am using what I believe to be the latest versions of the software: F5K Firewire Driver 3.0.0.70 F5K Firmware 0.1.1.2 PowerSDR 1.10.3 When I run Power SDR 1.10.3 I see FlexRadio Systems PowerSDR Beta v1.10.3 SVN:1606 at the top. While reading through the comments on this

[Flexradio] CW beep on 6 meters

I was trying 6 meters for the first time today. No problem on SSB. However, with my usual cw settings I could hear a single short beep in the receiver after sending a single letter and pausing or sending a few characters and stopping. Here is what I discovered by adjusting QSK settings and

Re: [Flexradio] PowerSDR and Vista

I found a CPU monitor on Vista: Control Panel Performance information tools Advanced tools Open Reliability and Performance Monitor Hope this helps you. 73, Craig On 10/3/07, Phil Theis [EMAIL PROTECTED] wrote: Just got a vista machine going. Before I blow it away and put XP on it, I

[Flexradio] Flex-5000 receiver stops while transmitter functions

Several times this evening I have had the receiver suddenly stop working while the transmitter continues to function. I was transmitting at the time using QSK with 15 ms delay the first time and 200 ms delay the second time. The Panadapter baseline suddenly fell down near the bottom and if I

[Flexradio] Modifying Vista Starup to boost Flex-5000 Performance

I found that at times audio glitches were occuring while operating PowerSDR and MixW. I suspected that there were programs in the background periodically running and cutting into my CPU's capacity. My CPU was running at about 25-30% with occasional jumps near 100% when the glitches in audio

[Flexradio] Vista and PowerSDR - has stopped working

Hi crew, Here is another strange thing I have noted since getting my Flex-5000A up and running: Everytime I close PowerSDR (which I always do before turning off the Flex-5000), Vista gives me the error message: PowerSDR has stopped working and then another dialog box pops up and asks me if I

[Flexradio] Noise with Flex-5000A to MixW using VAC 4

I think that one of you brainiacs may be able to give me some pointers. I have only had the Flex-5000 since last Friday and have been trying to get it tweaked mainly for cw and digital modes. Although I have been able to get the VAC and VCOM links working between PowerSDR/Flex-5000/MixW, I can't

[Flexradio] Flex-5000 to MixW Noise via VAC 4 Problem Solved!

I just want to report back to the group that I have solved the problem with a noisy display on MixW with the help of Tim Ellison. It turned out that the PowerSDR and MixW CAT interface were setup with different baud rates (imagine that!). I discovered the problem after creating a new database.