What milliseconds should the delta 44 latency be set for?
Bill Nagle
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://mail.flex-radio.biz/pipermail
Ok, so I changed the svn address to trunk/Source and it downloaded fine.
NOW, after I compile in release mode I cant seem to find where visual 2003
is putting the BIN folder.
Bill Nagle
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http
t is wrong with the syntax:
svn://206.216.146.154/svn/repos_sdr_windows/powersdr/trunk/source ?
Bill Nagle
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http:/
--- Forwarded message follows ---
From: Bill Nagle <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject:312 question
Date sent: Wed, 24 May 2006 12:33:22 -0400
I recently purchased version 312 of vac and have a quest
Does anyone have a suggestion as to quiet the fan noise on the sdr1000?
Perhaps slowing it down a bit with a series resistor?
Bill Nagle
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
I've posted an .mp3 of the Flex Saturday evening Dayton session audio @:
http://www.tracey.org/wjt/temp/flex-dayton.mp3
Cheers,
Bill (kd5tfd)
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/lis
adding a second
virtual cable to the list in the vac software.
I am setting up a wav file recorder and would like to eliminate the external
audio jumpers currently going from the delta44 speaker out to the onboard
line in jack.
Bill Nagle
[EMAIL PROTECTED
One fly in the ointment ... the SDR 1000 hardware is not full duplex. So
you can't measure the response to the signal your sending into the device
under test.
Regards,
Bill (kd5tfd)
At 11:08 PM 5/13/2006, Rob Frohne wrote:
>Hi Everyone,
>
>It appears to me that it would be pr
A translation for English acronym to English: DVR == Digital Video Recorder
Guess the acronym does not translate well into French!
Cheers.
Bill
At 05:05 PM 5/13/2006, José Dumoulin wrote:
>Eric
>
>Call your wife back and try to obtain a camera so we can listen and view.
>
&g
does anyone have a copy of the instructions to change R9 from 1k to 470
ohms to correct the occasional problem where the equipment does not go
back to receive? I need the location of the resistor and which board it is on
also.
Bill Nagle
afe metal to ingest.
At 10:11 AM 5/2/2006, Bill Guyger wrote:
>Hi All
>
>This is totlly off topic, but the Bismuth - Lead connection caused
>me to remember that there was a company in the building I work in
>that was developing Bismuth Shot Gun Shells. Their theory which
>seemed
in seperate boxes that I
unloaded seperatly. "It ain't natural I tell you"!
Bill AD5OL
>>> "Guy Olinger, K2AV" <[EMAIL PROTECTED]> 04/29/06 08:27PM >>>
Whether or not they achieve the patent may be problematic, but likely
2) The most common f
/ -- this is the output of a
PCM2900 chip driven w/ a 1khz square wave. The input showed the same issue.
Cheers,
Bill (kd5tfd)
At 06:02 PM 4/25/2006, Jim Lux wrote:
Would it be useful to have a soundcard test utility (wasn't there something
used in the early days?) that would validate tha
in order here -- but at the moment DttSP pretty
much assumes I and Q are synchronous. Will let the general solution wait
for a better calibration system.
Regards,
Bill (kd5tfd)
At 07:11 PM 4/24/2006, Frank Brickle wrote:
Bill --
> ...Anyone have an opinion on the right place to implemen
cards
-- think I need to find a little time to code up a patch for this option
for PowerSDR.Anyone have an opinion on the right place to implement
such an option - ie on the C# side of the world, or should it be down in
the DttSP code?
Cheers,
Bill (kd5tfd)
At 05:22 PM 4/24/2006, Eric
I push the MOX button it momentarily
goes into receive then right back to transmit mode. Unchecking the VOX box
has no effect once it has been checked. The only way to stop it is to exit the
program.
Bill Nagle
tter choke than the tdk or other suggestions?
Setup is delta44 on a 2.8gig w/512m ram.
Bill Nagle
[EMAIL PROTECTED]
Think it is both -- the filename is cwkeyer.cs, the class within the file
is CWKeyer2
Regards,
Bill
At 10:54 AM 4/16/2006, Christopher T. Day wrote:
Bill,
Thanks. Is that cwkeyer.cs or cwkeyer2.sc or both? [Coffee still taking
hold.]
Chris - AE6VK
support for the FPGA gizmo --
we're looking to have the key hooked to the FPGA and sending the keying
data over the USB port so need to figure out how to hook it in.
Cheers,
Bill (kd5tfd)
At 11:42 PM 4/15/2006, Christopher T. Day wrote:
<...>
If that makes any sense to anybody wh
n to users of my code - they can fix it themselves
(or find someone else to) if I don't care to, or don't agree with the
changes they are asking for, etc. I find this liberating as I can walk
away from the code if I need to or desire to in the future without leaving
the user community wi
e reconfig be left that
way so that you can transmit both mic and wave?
BTW, I finally put the flex into its permanent operating position and am now
driving it with the external audio bank similar to Dave AD does. Superbo!
Bill Nagle
[EMAIL PROTECTED]
you
power down the speakers?
Regards,
Bill (kd5tfd)
At 08:20 PM 4/8/2006, KD5NWA wrote:
The problem I want to solve is peculiar to a Delta-44, but the Delta
card is a funky card, it's not like a standard sound card. It outputs
all sorts of noise when not in use and when you turn off t
tc.
I'll take the discussion off the list.
Cheers,
Bill (kd5tfd)
At 01:23 PM 4/8/2006, Robert McGwier wrote:
<..>
I apologize for boring everyone with this. Why it was posted publicly
with two people capable of answering it I do not know.
Bob
that fix
themselves without any clear reason to point to at a later date.
Bill
>>> "Tim Ellison" <[EMAIL PROTECTED]> 04/07/06 08:22PM >>>
I had the same problem until I followed the driver install procedure to
the letter.
-Tim
---
Integrated Technical Service
zed
to 2048 and never changed) -- intentional, or collateral damage in trying
to keep audio.cs from reaching out to Console.cs properties?
Regards,
Bill (kd5tfd)
what is the procedure for using drm with powersdr? I have purchased the
dream software but how does it interface with flex?
Bill Nagle
Duane
Don't know if you'd be interested, but network type fiber is available jacketed
with flexible steel conduit. Looks like regular BX or MC electrical cable, but
is painted orange.
Bill AD5OL
>>> Duane - N9DG <[EMAIL PROTECTED]> 04/01/06 01:50PM >>>
--
ky wave causing excessive hammering of on channel stations. Just a thought.
Bill AD5OL
>>> Paul Shaffer <[EMAIL PROTECTED]> 03/28/06 07:32PM >>>
I need an idiots guide to AM reception. Even the strongest local stations have
a hum or buzz in
the audio through sdr-100
At 11:02 AM 3/25/2006, Jerald Jones wrote:
<...>
So what now?
Jerry WK0J
Here it's a beautiful spring day so I'd say antenna work!
Sorry - couldn't resist.
Cheers,
Bill (kd5tfd)
that msadox.dll is not really an error as was explained to me by flex. just
ignore it.
On 25 Mar 2006 at 8:57, Ken N9VV wrote:
Date sent: Sat, 25 Mar 2006 08:57:17 -0600
From: Ken N9VV <[EMAIL PROTECTED]>
To: Bill Nagle <[EMAIL
the problem with release 19 source is that it brings the compiler up into
DEBUG mode. Try switching to RELEASE mode and recompiling.
Bill Nagle
gt;
To: Bill Nagle <[EMAIL PROTECTED]>
Copies to: FlexRadio@flex-radio.biz
Subject:Re: [Flexradio] release 19 compile error
> Yes, I have a similar error Bill. Here is the text from
> the bottom of the compile window showing 3 errors. I
> cleared out all my
when compiling release 19 source, thhe error "unable to find setup.vdproj"
I suspect this is being caused by a glitch in the sln file?
Bill Nagle
Tonigth's Teamspeak audio is now posted @:
http://www.tracey.org/wjt/temp/forum-0324.mp3
Cheers,
Bill (kd5tfd)
atts.
Your comments?
Bill Nagle
[EMAIL PROTECTED]
because the breaker
thinks the charging current for the caps is you frying in your own juice and
trips.
All the best!
Bill AD5OL
>>> Jim Lux <[EMAIL PROTECTED]> 03/22/06 04:36PM >>>
At 12:21 PM 3/22/2006, John Basilotto W5GI wrote:
Interesting stuff there.. one quibble
I've been meaning and forgetting to ask who told you the eq notch should be
at 160 hz? All of my broadcast engineer friends say it should be centered
around 250 hz and be around -6-10 db deep.
Perhaps we should start a thread on the forum and get other pinions?
Bill Nagle
[EMAIL PROTECTED]
calls and the wrong run
time is linked I could see that being a problem where the run time may not
have all the stuff this level of the compiler needs.
<...>
If you get desperate send me the ARF files you've got and I'll see if
they'll build on my setup.
Larry WO0Z
Cheers,
Bill (kd5tfd)
configure, make, make install.
Regards,
Bill (kd5tfd)
to get
run down.
Cheers,
BIll (kd5tfd)
At 10:12 PM 3/12/2006, Charles Greene wrote:
Hi,
I set my Firebox sample rate at 96K and Setup/audio -> Sample Rate to
96K. The Panadapter screen is now +/- 20K. Then if you select DRM
mode, the DRM signal bandwidth shows as +/- 10K where it was +/-
dependencies to get PortAudio to build before my project.
Cheers,
Bill (kd5tfd)
At 12:23 PM 3/12/2006, Bill Nagle wrote:
How do i add a new c file into the powersdr solution in visual studio?
Bill Nagle
How do i add a new c file into the powersdr solution in visual studio?
Bill Nagle
I use the Dream DRM decoder ( http://drm.sourceforge.net/ ). They do not
distribute in binary form due to some potential patent issues. However, a
binary for Windows can be found at: http://www.rarewares.org/aac.html
Cheers,
Bill (kd5tfd)
At 08:25 PM 3/11/2006, Sid Leben wrote:
I would
will do
On 11 Mar 2006 at 17:20, Robert McGwier wrote:
Date sent: Sat, 11 Mar 2006 17:20:37 -0500
From: Robert McGwier <[EMAIL PROTECTED]>
To: Bill Nagle <[EMAIL PROTECTED]>
Copies to: FlexRadio@flex-radio
Release 18 (3/11/06) has spurs every couple of kc on 75 meters (-115db)
that are not there in release 15. However, spur reduction option seems to
minumize them,
Bill Nagle
Does anyone know how to switch the RELEASE folder to automatic overwrite
each time a build is done? currently the default is if there is a similar
filename
in the folder it leaves it alone.
using c++ .net visual studio 2003
Bill Nagle
[EMAIL PROTECTED]
ose ..
Regards,
Bill
At 02:04 AM 3/10/2006, Larry Loen wrote:
<...>
Invoking CVTRES.EXE:
/machine:x86
/verbose
/out:"C:\DOCUME~1\LARRYL~1\LOCALS~1\Temp\lnk7FFF.tmp"
/readonly
"..\..\temp\Debug\pthread\version.res"
Microsoft (R) Windows Resource To Object Converter
Larry,
I put the build logs for a virgin build of 1.4.5 Preview 16 created by
Visual Studio at: http://tracey.org/wjt/temp/buildlogs.zip
Looks like it has all the info you need to build the C pieces with the
command line compilers.
Regards,
Bill (kd5tfd)
At 10:53 AM 3/9/2006, [EMAIL
Comments in line
Bill (kd5tfd)
At 10:27 PM 3/8/2006, Larry Loen wrote:
<....>
Bill Tracey wrote:
the projects above are C projects -- they don't distribute the tree as a
built tree - it's a clean source tree
Right. But, somewhere I remember (perhaps wrongly) a claim that
Comments inline.
Bill (kd5tfd)
At 08:39 PM 3/8/2006, Larry Loen wrote:
This evening, I decided to do a little experimenting with the source.
<...>
DttSp.vcproj
PA19.vcproj
PortTalk.vcproj
pthread.vcproj
fftw_wisdom.vcproj
You're using just C# -- the projects above are C proje
this in previews 15 and svn 16 ?
Bill Nagle
ensens are a good idea.
Bill AD5OL
>>> Paul Shaffer <[EMAIL PROTECTED]> 03/07/06 03:27PM >>>
In the past I have had problems connecting my sound card to stereo systems.
After blowing a couple of Dell motherboards I started to use a Radio Shack
audio
isolation transfor
folks are
currently using, suspect they are on XP so it may not be an issue.
I don't know on SVN - I know it compiled and worked as of a day or two back.
Regards,
Bill (kd5tfd)
At 08:59 PM 3/6/2006, KD5NWA wrote:
<>
Which version of Direct-X SDK do I need to have loaded in the PC
g the monitor hardware performave- no effect. Tried changing
the sdr panadapter to scope mode- no effect.
If I open another app and put it in front of the open sdr app, it cears up.
If I minimize the sdr software it clears up.
Computer is an athlon 1.8gig w/.5 gig ram.
Bill Nagle
Thanks Phil, my rig will appreciate te info. :))
Bill Nagle
proposed
solution is to put a small "in between" relay in the ptt line and have it's
coil
powered by the 12 volts on the LOAD side of the sdr power switch on the
front panel.
Bill Nagle
in
release 14. This effect is the same with or without the alc leveler engaged.
This reduction effects the positive peaks on AM modulation causing non
linear audio on peaks.
Please change it back to the way it was in 14.
Thanks,
Bill Nagle
[EMAIL PROTECTED]
headphones .
Bill Nagle
[EMAIL PROTECTED]
Every once in awhile I press a key (not sure which one it is) and the sdr
software becomes about one quarter of its size and the screen now shows
also any open apps that were running. Pressing the escape key brings the
sdr software back in focus.
What IS that magic key?
Bill Nagle
[EMAIL
help with the drop outs and the like. YMMV.
Have fun.
Cheers,
Bill (kd5tfd)
Hi Jerry:
Could you please send me the code changes to get the sdr1000 panadapter
out to 96khz in release 15?
Thanks,
Bill Nagle
[EMAIL PROTECTED]
ALT+I, K , L dont seem to work on the filters either. This is release 15
Bill Nagle
Am programming the contour shuttle and came across this glitch:
When pressing the key combo ALT+F to narrow the filter, it jumps right down
to VAR1 and then each time you press the combo it changes the cw low/high
limit screens. The same is true if you press CTRL+F to widen the filter.
Bill
Anyone care to share suggested layouts for the buttons on the contour
shuttle device for the sdr1000?
Bill Nagle
[EMAIL PROTECTED]
).
Cheers,
Bill (kd5tfd)
At 01:12 PM 2/26/2006, Robert McGwier wrote:
I believe all of you are mistaking one thing for another. This is
trivially fixed if I am right. What happens sometimes when you install a
new card , such as the Delta 44, it becomes the default sound card when
you wanted the
Does anyone have a graphic of the powersdr.pref keys on the contour
shuttle?
Bill Nagle
[EMAIL PROTECTED]
happily allows a PCI soundcard to be installed without disabling the on
board sound.
Cheers,
Bill (kd5tfd)
At 09:00 AM 2/26/2006, Robert McGwier wrote:
Don:
I do not believe this can possibly be correct and you got a misinformed
by an ASUS support person. I have an ASUS MB, and while they are
Velcro is a wonderful thing in instances such as this. Just be sure you clean
the surfaces you're sticking the Velcro to with something like Denatured
Alcohol so the adhesive will stick properly.
Bill AD5OL
>>> Larry Loen <[EMAIL PROTECTED]> 02/25/06 06:23PM >>>
In version 15 the imd two tone test does not work nor does the power adjust
associated with it. It defaults over to the sweep generator instead.
Bill Nagle
Do you have a description of the various filters like the hanning default and
what is best for what mode?
Bill Nagle
d tweak it and make a
suggestion for future rev change. Better yet, could it be made adjustable in
settings easily?
Also, has anyone asked for independent sideband transmit capability for
possible use with digital on one side and voice on the other?
Bill Nagle
[EMAIL PROTECTED]
Has anyone else run into this glitch on rev 13-15?
If you set LSB receive to say 4khz then exit the software and start it up
again,
LSB has switched to 6khz.
Bill Nagle
Requesting an increase of eq channels from 3 to 5. Anyone else?
Bill Nagle
With the FPGA based sound I/O work we're doing, independent D/A channels
are fairly easy, just instantiate a PWM decoder in the FPGA and an R and C
in hardware can be used as an output channel.
Regards,
Bill (kd5tfd)
At 10:58 AM 2/21/2006, Frank Brickle wrote:
Wouldn't this n
be easy to add with the digital world in some future sdr
revision.
Your thoughts?
Bill Nagle
In Release 14, if you exit the program from the AM 6khz position with LSB and
USB set to
4khz,
the next time the program is started LSB starts at 6khz while USB remembers its
4khz
setting.
Bill Nagle
My unofficial mp3 of the town hall audio is at:
http://www.tracey.org/wjt/temp/forum-town-hall-18feb.mp3
I forgot to strip the front silence on this - the audio starts about
2.5 minutes into the file.
Cheers,
Bill (kd5tfd)
At 05:16 PM 2/18/2006, Lyman H. Wolfla II wrote:
Would it be
For a five band EQ I would suggest the following center frequencies (with of
course the
180hz notch option):
100 hz
300 hz
600 hz
1500 hz
3500 hz
Anyone else want to chime in on these ?
Bill Nagle
[EMAIL PROTECTED]
%
instead of higher positive peak availability 50%80% on average male voice.
I don't know if this is a creature the alc has hatched since it is NOT present
in
version 12 which shows a nice ratio that changes when the mike phase is
reversed.
Bill Nagle
[EMAIL PROTECTED]
I vote for 5 channels of EQ rather than 3.
Bill Nagle
http://home.ptd.net/~w3duq
Question on the 100 watt pa: Could we crank up the alc controlled available
peak power a bit by decreasing the bias on either the driver or main
transistors to reduce intermod above 100 watts on ssb ?
Bill Nagle
http://home.ptd.net/~w3duq
PS: The scope mode of the display only shows audio waveforms, not
modulation waveforms.
Bill Nagle
http://home.ptd.net/~w3duq
While getting faster and faster computers may be an efficient pragmatic
approach, an unexplained 2x degradation is something I think one would
want to track down - it's a pretty severe performance regression and is a
sign something not understood is going on.
Cheers,
Bill
At 11:54 PM
AND audio. This is NOT desirable.
Bill Nagle
[EMAIL PROTECTED]
transmit in the setup menus.
Is this a major change or a simple one?
Bill Nagle
[EMAIL PROTECTED]
ou can run more peak power on any given amp on AM.
I can run my SDR at the 25 watt carrier out level and modulate around 200%
in the positive direction (the negative peaks dont cut the carrier off due to
the
operation of the balanced modulator) without any i-m generated.
Bill Nagle
[EMAIL
or am which is
EXACTLY the way we need it to work.
One question: What is the "leveler" supposed to be doing?
Bill Nagle
[EMAIL PROTECTED]
standby then back to on it recovers.
Bill Nagle
[EMAIL PROTECTED]
Where do I obtain VAC 3.11 ?
Bill Nagle
[EMAIL PROTECTED]
from am/lsb/usb to
digl or digu
Bill Nagle
[EMAIL PROTECTED]
l bet you
will find that it is NOT working.
Bill Nagle
http://home.ptd.net/~w3duq
I got the same warning. Fortunately they were caughe and confined by my Postini
service.
Bill AD5OL
>>> Wallace Watson <[EMAIL PROTECTED]> 02/04/06 12:16PM >>>
Folks,
I just received notification from Norton Antivirus of an email from the
following poster con
stop it also
This does not happen on ssb or dsb or fm modes. This happens with two
different delta44 cards.
A cure might be to put a very low frequency highpass filter in the software
(say 10 hz cutoff) wherever the mike input control comes from.
Bill Nagle
[EMAIL PROTECTED]
,
Bill (kd5tfd)
At 08:37 AM 2/4/2006, Jim Lux wrote:
<...edited ...>
Do USB devices have internal serial numbers?
Jim
pulling
source drops as they come out - not sure how many others would
be. Probably need on the order of a half dozen or dozen bleeding edge
people for such a scheme to work.
Just a thought,
Cheers,
Bill (kd5tfd)
At 09:21 PM 2/3/2006, Charles Greene wrote:
Gerald and All,
... edited ...
anyone on this list who will look down
their nose at anybody for asking questions.
Bill AD5OL
>>> "Eric Ellison" <[EMAIL PROTECTED]> 02/02/06 11:18PM >>>
Folks
A Reflector member contributed a PM suggesting that I clarify some of the
terms the I, and others ha
I am trying to set up the DREAM drm encoder using sdr release 12 and
there is no option in transmit profile setup ulldown menu for saving options to
a DRM profile.
Bill Nagle
[EMAIL PROTECTED]
Seems that the MON button works on SSB but not on AM. It would be very
useful to have it active in AM.
Bill Nagle
http://home.ptd.net/~w3duq
In Version 12 the playback level for wave files is extremely high.
Bill Nagle
[EMAIL PROTECTED]
Has anyone tried to reverse the mikw phase 180 degrees from within the
flex? I tried reversing it in the delta44 card pullup menu on in3 and in4 but
it
has no effect, i assume because the flex takes over?
Bill Nagle
http://home.ptd.net/~w3duq
701 - 800 of 942 matches
Mail list logo
