Roh . wrote:
hi all,
im trying to get freevo to use the numeric keypad.
ive tried:
KEYMAP[K_2] = 'UP'
KEYMAP[K_8] = 'DOWN'
and
KEYMAP[K_2] = 'MENU_UP'
KEYMAP[K_8] = 'MENU_DOWN'
and
EVENTS['menu']['2'] = EVENT('UP')
EVENTS
hi all,
im trying to get freevo to use the numeric keypad.
ive tried:
KEYMAP[K_2] = 'UP'
KEYMAP[K_8] = 'DOWN'
and
KEYMAP[K_2] = 'MENU_UP'
KEYMAP[K_8] = 'MENU_DOWN'
and
EVENTS['menu']['2'] = EVENT('UP')
EVENTS['menu']['8'] = EVENT('DOWN')
and
EVENTS['menu']['2'] = EVENT('MENU_UP')
EVENTS['menu']['8
I am very interested in this, I still ahve analog cable because of the
fact that I don't wanna have lots of boxes around the house to watch tv and
for things like freevo. If there is a reasonable hardware/software soln I
would be very interested. Has anyone in the US done this??
Also, I don'
Digital cable is not the same standard as HDTV.
well unless there is something very strange going on over there in the
states, it actually is, the only difference is some companys scramble their
channels so only their set-top boxes can decode it.
But dont stress, some smart linux coders have ma
You are obviously a self righteous idiot.
well, im not going to lower myself to your level and start name-calling.
that belongs in the schoolyard.
If you can't say anything constructive, why not bugger off and play
somewhere else.
and how is what your saying constructive at all?
...ever heard t
..just to clarify my point from last night..
On Wed, 2004-03-17 at 08:37, Roh . wrote:
> >What type of hardware do I need to be able to set up a freevo box with
> >digital cable?
> >
> how about a digital tuner card? just the same as analogue but its
digital!!
>
U
What type of hardware do I need to be able to set up a freevo box with
digital cable?
how about a digital tuner card? just the same as analogue but its digital!!
Obviously I need some sort of IR device to tell the digital cable box to
tune to a channel... and change my recording script to check
l control, which it dosnt do now)
anyways, its not a small job - but if anyone's interested drop me a line,
roh
([EMAIL PROTECTED])
BTW - at the moment it works out kinda cool cos i can stream video to remote
clients, watch the stream locally, and record it locally or remotely too. im
using
hi ppls
for all the aussie users running tv_grab_au, there is now a new (0.2)
version with a few bugfixes that affected regional channels (if your a
regional user you know what im talking about!), and finally have added Optus
and Foxtel pay-tv listings support.
looking forward to feedback from
I'm not sure what options are available for my card or what's in the
drivers. Do you mean you read the bttv driver source and experimented
until
you found what worked with your card?
well thats what i did, i only read the driver source to make sure i got all
the options, sometime modinfo *modu
I need some hand-holding on capture card issue.
I'm using RH8 and Kworld KW-TV878RF-PRO capture card. Card isn't being
autodetected. It is listed in the BTTV info. as "card=78 - Jetway
TV/Capture JW-TV878-FBK, Kworld KW-TV878RF ". How do I 'install' this card
in RH8 so that I can test it with xa
This combined with the idea of a big TV (HDTV) has me thinking...
I have read that Windows guys are using "Powerstrip" for fine tweaking so
they can output from their DVI out on their Windows box to a HDTV's DVI in.
I believe this is what I want to do. I don't have to mess with any
Component
Sometimes I want to backup a DVD to my harddisk, so I use dd and create
a filename.dvd that is an image of the DVD. Is there any way I can get
Freevo to play these files using Xine?
im just guessing here, but since ur using dd to make a complete image of the
dvd-rom, i think u should be able to
On Tuesday 09 September 2003 12:59, Roh . wrote:
> do u want to use the irda port on ur m/b for lirc or irda? (i see alot
of
> people confused about this)
I want to use the IrDA port on the MB for Lirc. (Although IrDA would be
nice
to get working for other things).
just a little hint,
do u want to use the irda port on ur m/b for lirc or irda? (i see alot of
people confused about this)
if for irda - use the irda modules
if for lirc - use the lirc modules, u have to set ur bios settings to SIR
(not FIR) and use the normail lirc_serial module (lirc cant work with any
speeds ab
On Friday 05 September 2003 07:17, Pferdekaemper, Thorsten wrote:
3. The listings contain a Tag like 16. It seems
that freevo has a problem with that. I deleted the handling of this tag in
epg_xmltv.py to make this work. (freevo does not seem to display the rating
anyway.
just to let you know,
>>yeh misterhouse can do some cool things. but it will still do all the
same
>>cool things, and more, once 1-Wire has more user-end programs, drivers,
>>etc
there's the difference I have my home entirely automated now not
someday when they decide to release these 1wire based things.(who s
e cool (after all
u just control misterhouse via apache, why not freevo?)
regards,
rohbags.
([EMAIL PROTECTED])
-Original Message-
From: Roh . [mailto:[EMAIL PROTECTED]
Sent: Sunday, August 24, 2003 4:56 AM
To: [EMAIL PROTECTED]
Subject: Re: [Freevo-users] radio frequency receivers
&
almost every camcorder on the market with a CCD will see IR quite well.
colour ccd can see IR, but i wouldnt describe it as "quite well", id say
very poorly, and not all colour ccds detect ir light.
forget a B&W camera... grab most any low-end camcorder from the past 3
years
to see IR light fro
I know when I had my Tivo, I had it down low and when sitting at couch,
sometimes I had to lean forward when using remote because coffee table was
in the way and caused signal to get lost.
welll if you havnt built the circuitry then you dont have much control over
its quality eh?
i had a tv years
I don't know if lirc supports it, but there are RF recievers for
Linux; that's pretty much all you need. (Well, obviously on the
software side, lirc support)
On Sat, Aug 23, 2003 at 06:08:02PM -0700, skeeterskip wrote:
>
>My ceiling fan has this cool radio frequency remote. I can have my
>
Ok not 100% sure about this but I've just tried playing an mpeg 1 file thru
mplayer on a remote shell (not sure if doing it this way will work but I
can't see why not - even though I can't physically see the output :-).
tried mplayer -vo dxr3 -ao oss://em8300_ma-0 test.mpg
and mplayer -vo dxr3 tes
> thats very odd, if it happened as soon as u turned ur pc on, id
> say hardware
> clitch, if its happening at boot time *some* sort of software/firware is
> activating the bttv audio, id guess anyway.
It seems to start after you first start recording from /dev/dsp, way after
the modules are insta
> Al,
> thats happened to me when the bttv or tuner id number is wrong in
> modules.conf (bttv misconfigured)
>
> i bet when u "rmmod bttv tuner btaudio (etc)" the audio turns off, and
> as soon as u "insmod bttv" again
> the audio comes back on? if so its the bttv module(s) config.
Unfortunately
Al,
thats happened to me when the bttv or tuner id number is wrong in
modules.conf (bttv misconfigured)
i bet when u "rmmod bttv tuner btaudio (etc)" the audio turns off, and as
soon as u "insmod bttv" again
the audio comes back on? if so its the bttv module(s) config.
play with modules.conf.
here's an answer to one more Q,
a little while ago i was doing something similar with booting (but not media
boxes, and not using runlevels). you can select runlevels from boot time if
u want, but you can also pass on custom variables.
eg:
something in your lilo.conf like this:
image=/boot/fw
Hi James,
I wish i could help you more here, Im using the tv_grab_au grabber but have
pulled most of the standard TV guide stuff out of my local copy of freevo,
im sort of playing around with new things at home and im using a central
mysql database for a few different machines.
If its just the
Narf wrote:
I have tried out freevo before and was very impressed
with it. Now i have taken on a new project, building
a whole media box/ server based around this system.
My overall goal is to put the computer in a case the
size of a stereo receiver so that i can put it in a
rack, or just stacked
On Mon, Aug 04, 2003 at 02:41:46AM +, Roh . wrote:
> when does speed matter? i run the WebVCR+ database on a p1 233 and it
> certainly isnt slow
I'm not saying that speed is the issue. I use MySQL for my websites,
and I'm happy with it. I'm saying that it isn't
> MySQL supports both subselects (as of 4.0) and foreign keys (through
> innodb tables). Also, I'd be wary of SQLite's statements that it's
faster
> than MySQL since its tests were ran against 3.23 and not the latest 4.0
> (which is odd since 4.0 has been stable for quite a while).
The rub is th
joe,
have a look at the webvcr+ project ( http://webvcrplus.sourceforge.net/ )
it does everything you want it do plus a little more :P
if your looking for something that is more of a 'video' than a 'tv' then go
webvcr+
cheers,
rohbags.
My recent trials with the recording aspect of Freevo ha
check out the linux lcd project - works with all common chipsets, visit:
http://lcdproc.omnipotent.net/
..if u want a blue backlight then buy one with it built-in or buy blue SMD
LEDs :)
roh.
PS ...googling "linux lcd" wouldve answered this for u
Hi I'm trying to find a way t
run all my other X apps from remote login (with --display), i dont know
why i thought freevo was different :P (i probably should stop geeking out so
early in the morning b4 ample coffee intake! :P )
thanks again,
Roh.
rob wrote:
You are running this from inside of X right? Is it a local
ot;", line 1, in ?
File "skins/main1/skin_main1.py", line 95, in ?
import xml_skin
File "skins/main1/xml_skin.py", line 65, in ?
osd = osd.get_singleton()
File "src/osd.py", line 244, in get_singleton
_singleton = util.SynchronizedObject(OSD())
File "src
tv out), alsa9, and again it wont run, same error. and this box
also runs mplayer/mythtv/xawtv no problems. Ive also tried with the standard
X11 sis driver and same deal.
(its the full binary release - 1.3.2)
please someone - HELP!
roh.
__
sicaly a standard rh8.0 box with the gatos driver and alsa9 drivers.
any ideas why pygame is crakin it?
...maybe im over-looking it, but shouldnt there be an 'easy' documented way
to pull out pygame for those of us who dont game! i see it can be removed
from the menu, but i cant find an
36 matches
Mail list logo