Maciej Wachowiec wrote:
After that You just need to add a user to windows group.
Is this also true for root? Generally asked, do you add root to wheel floppy
audio cdrom games camera users etc. or isn't this necessary due to root's
privileges?
mg
--
[EMAIL PROTECTED] mailing list
On Sat, Jun 21, 2003 at 08:45:24AM +0200, Martin Gramatke wrote:
Maciej Wachowiec wrote:
After that You just need to add a user to windows group.
Is this also true for root? Generally asked, do you add root to wheel floppy
audio cdrom games camera users etc. or isn't this necessary due to
I found the problem - I wasn't running an up to date Neverwinter nights
version on my Windows system (which I used to copy the files from).
After updating to the latest version everything is A-OK.
On Sat, 2003-06-21 at 13:33, [EMAIL PROTECTED] wrote:
On Fri, 20 Jun 2003 17:53:25 -0700
Michael
Hi all,
I am interested in trying e17 and was wandering if it would be best to
emerge e or enlightenment-cvs ?
thank you in advance
drewbian
--
[EMAIL PROTECTED] mailing list
On 20/06/03 12:34 -0400, Bud Roth wrote:
I am following the gentoo virtual mail host howto, which uses
courier-imap to pull mail from the postfix mail queues. Postfix is
configured to use ~/.maildir to hold user mail and queues stuff in
/var/spool/postfix/. I can't get imapd to work. I did
On 2003.06.20 13:10, Norberto BENSA wrote:
[EMAIL PROTECTED] ~ $ date ; echo ${Leonid Podolny}
Friday 20 June 2003 09:54 am
Good luck :)
I have changed my complete computer for one exactly as I had
before. I'm
going to try again the whole installation process.
This is the most broken thread I
Following a recent reboot, I'm having problems logging into kde 3.1.1a
or 3.1.2. I get the error 'ksmserver crashed' s and then I'm suddendly
returned to kdm.I am able to log in to wmaker, and I've cleaned out
all kde references in /tmp on this system which is updated daily with
'emerge
Hi,
ip_conntrack_tftp.o != ip_conntrack_ftp.o
You need to activate the module in your kernel config.
/CrPy
Am Samstag, 21. Juni 2003 02:09 schrieb Jorge Almeida:
On Sat, 21 Jun 2003, Norbert Kamenicky wrote:
Jorge Almeida wrote:
unable to load module ip_conntrack_ftp
ip_nat_ftp: error
I have a slight problem in that I'd really like to be able to resize my
/ partition. The problem is that it is formatted as reiserfs so
ParitionMagic won't handle it (unless there is a newer version that the
one I have).
At the moment I have got around the issue by creating /var /usr and
/home
Chris van der Pennen wrote:
On Fri, 2003-06-20 at 18:30, MAL wrote:
/MAL wrote:
Append the runlevel name (number in other distros) to the kernel line at
boot.
Like when you boot single user mode by appending 'single'.
So to solve Jan's problem, create a new directory in /etc/runlevels
called
On Sat, 21 Jun 2003, CrPy wrote:
Hi,
ip_conntrack_tftp.o != ip_conntrack_ftp.o
You need to activate the module in your kernel config.
/CrPy
Well, it seems that it should be there! Maybe some option of uninformative
name is missing ...
localhost root # ls
On Saturday 21 Jun 2003 10:27, Jamie Dobbs wrote:
I have a slight problem in that I'd really like to be able to resize
my / partition. The problem is that it is formatted as reiserfs so
ParitionMagic won't handle it (unless there is a newer version that
the one I have).
At the moment I have
Hi Jorge,
there is no Problem, because you have it in your Kernel and not as Module.
This means that shorewall fails to load it as module.
You have to do one of this:
1. live with the error message.
2. configure it as module (kernel)
3. change the shorewall skript
I would prefer to make it as
On Sat, 21 Jun 2003, CrPy wrote:
Hi Jorge,
there is no Problem, because you have it in your Kernel and not as Module.
This means that shorewall fails to load it as module.
You have to do one of this:
1. live with the error message.
2. configure it as module (kernel)
3. change the
On 21 Jun 2003 11:45:58 +0930
James McArthur [EMAIL PROTECTED] wrote:
Problem I see is that I'm using gcc-3.3, and it's built for i686,
hence, no /usr/lib/gcc-lib/i586* directory.
libtool reports all of the correct settings for my setup, and when the
configure script runs for gedit, it
Maciej Wachowiec wrote:
If You take a look at /etc/group You'll see that root is a member
of most of the grups You mentioned, so You don't have to worry about
that. ;-)
Let me ask more directly again. Does group rights apply to root the same way
as to any other user or does root have some
On 21 Jun 2003 14:22:21 +1200
Jamie Dobbs [EMAIL PROTECTED] wrote:
I had this exact problem and spent a long time searching out an
answer, I eventually found to add a line like this:
/dev/hda1 /mnt vfat rw,user,umask=000
The noexec option is always a good idea.
Hi,
On Sat, 2003-06-21 at 20:10, Janne Johansson wrote:
there was discussion about a similar situation earlier, and Jonathan
Chocron said the following:
**
OK, you must wonder where it comes from : simply enough, from the
stage3 installs which uses a i586 optimized bootstrap for
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
Let me ask more directly again. Does group rights apply to root the same
way as to any other user or does root have some priviliges.
No, UID 0 is a special user, a priviledged user. When the kernel finds a open
call, it will look whether the
On Sat, Jun 21, 2003 at 01:00:54PM +0200, Martin Gramatke wrote:
Maciej Wachowiec wrote:
If You take a look at /etc/group You'll see that root is a member
of most of the grups You mentioned, so You don't have to worry about
that. ;-)
...
Now I worry I have to add some more groups. What
Hello all,
I was reading through the forums where I read scattered comments about
supermount. I checked the mail archives, but couldn't find much. I found
supermount's project on sourceforge. The readme says:
reame
To run supermount, compile and install a kernel with the supermount
patches
you have to download the supermount patch and aplyh it then it'll show
up in menuconfig(at least ought to).
On Sat, 2003-06-21 at 15:32, Ben Anderson wrote:
Hello all,
I was reading through the forums where I read scattered comments about
supermount. I checked the mail archives, but
On Saturday 21 June 2003 14:39, Lars Juel Nielsen wrote:
you have to download the supermount patch and aplyh it then it'll show
up in menuconfig(at least ought to).
snip OP
it is included in the gentoo-sources
--
Tom Wesley
Please encrypt personal replies if possible.
pgp0.pgp
On Sat, 2003-06-21 at 19:12, MAL wrote:
Chris van der Pennen wrote:
On Fri, 2003-06-20 at 18:30, MAL wrote:
/MAL wrote:
Append the runlevel name (number in other distros) to the kernel line at
boot.
Like when you boot single user mode by appending 'single'.
So to solve Jan's
Hi,
You can try QtParted:
http://qtparted.sourceforge.net
I posted an ebuild as a bug report.
regards
On Saturday 21 June 2003 10:14, Peter Ruskin wrote:
used to love ParitionMagic but ditched it some time ago because it
doesn't handle anything linux except ext2.
I use Acronis Operating
Hi,
Is there a way that I could setup a Linux client in such a way that it automatically detects all CUPS servers on a local network ?
Tried no hostname, but that doesn' t work.
I have two laptops that travel between our main office and a smaller office. Each of the sites has only one print
On Saturday 21 Jun 2003 14:11, Maciej Wachowiec wrote:
drwxrwxr-x 23 root windows 8192 1970-01-01 01:00 win
So both the root user and any member of windows group will have full
(rwx) access to this partition.
PS: There's something strange with the date of win directory... Or is
On 21 Jun 2003 16:04:10 +0200 Karl Huysmans wrote:
Hi,
Is there a way that I could setup a Linux client in such a way that it
automatically detects all CUPS servers on a local network ?
Tried no hostname, but that doesn' t work.
I have two laptops that travel between our main office
Hi,
one question, do you use the nvidia-driver package?Did you reemerged
nvidia-glx after the X update? Did you made an opengl-update nvidia after
that?
What are your CFLAGS? Maybe you have been to aggressive?
Glck Auf
Volker
--
[EMAIL PROTECTED] mailing list
Juan Ángel wrote:
No, UID 0 is a special user, a priviledged user.
Thank you for these clear words. Do you think I should remove root from any
groups? Currently root is in the groups root bin daemon sys adm disk wheel
floppy dialout tape and video, which seems a bit half-hearted and messy to
Hello
I'm trying to build my very first project (hello world) with kdevelop and the
following happens :
*** YOU'RE USING Autoconf version 2.13.
*** KDE requires autoconf 2.52, 2.53 or 2.54
gmake[1]: *** [cvs] Erreur 1
gmake: *** [all] Erreur 2
*** échec ***
the installed version of
Hi,
This errors does not come from automake/autoconf. You installed the new
version of the head program, which make it bug:
head -1 works with textutils-2.0, but the version from textutils-2.1 fails.
We must use head -n 1 instead.
Please, reinstall an older version :
emerge
List
I am trying to get a linux router/gateway setup. I am close but iptabes
is giving me a problem. When I reboot I am getting a few unresolved external from
the modules I built on kernel build. What I want to do is, IPV4 6, shorewall
firewall, nat, ipforwading and most of the security on a
On 2003.06.21 12:03, [EMAIL PROTECTED] wrote:
Hi,
You can try QtParted:
http://qtparted.sourceforge.net
I posted an ebuild as a bug report.
regards
Or even regular parted.
It looks like parted 1.6.5 wants to pull in progsreiserfs (not
reiserfsprogs), so I'm assuming there is reiser capability
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
Thank you for these clear words. Do you think I should remove root from any
groups? Currently root is in the groups root bin daemon sys adm disk wheel
floppy dialout tape and video, which seems a bit half-hearted and messy to
me.
Well, it
sorry I don't anything about supermount, but
As an aside - what gui irc client should I emerge?
xchat is very good!
I think it should be started as xchat-2
--Kees
--
[EMAIL PROTECTED] mailing list
-- I have a working gentoo-sources compiled, and I have successfully
merged pcmcia-cs-3.2.4 and it works (I can insert my pcmcia network
card, and it works fine).
When I try to merge linux-wlan-ng without the USE flag pcmcia, it does
not build any pcmcia drivers. (ie it doesnt check the .config
I'm currently using gcc 3.2.3 but would like to emerge gcc 3.3 in
*parallel* to that.
Is that possible, if so, how? How can gcc-config be used to switch
between compiler versions?
Thanks,
Sebastian
--
Sebastian Bergmann
http://sebastian-bergmann.de/
Hey guys, I'm working with an api that has a pretty tight NDA on it.
Right now, I'm getting an error something like whats below. I can't give
you actual filenames or anything because of the NDA. However, I don't
have sources for the libraries, so I'm not sure I can figure this one
out on my own.
Thx, but this seems complicated again :-)
Just discovered that the ServerName in client.conf points to whatever
/etc/hosts or the DNS points to, so I solved the problem by adding the
same alias on the dns servers at both sites, seems to work OK.
Problem solved ...
On Sat, 2003-06-21 at 16:41,
Hi there
I have a scsi cdrom drive that won't boot bootable cdroms and I'd like to try
Gentoo so is there a floppy (1.44Mb) bootdisk image somewhere that I can
get started?
Thanks
--
Bjarke Bruun - E-mail: [EMAIL PROTECTED]
__ _
/ / (_)__ __ __
/ /__/ / _ \/ // /\ \/ / . . .
Well, I can't help with the scsi cdrom boot problem, but users with IDE
cdrom drives and systems that can't boot directly from cd can use the
image on bug 19548
http://bugs.gentoo.org/show_bug.cgi?id=19548
I hope that helps you guys out.
On Sat, 2003-06-21 at 13:57, Brian Hall wrote:
To this
On Sat, 21 Jun 2003 20:52:36 +0200
[EMAIL PROTECTED] (by way of Bjarke Bruun [EMAIL PROTECTED])
wrote:
Hi there
I have a scsi cdrom drive that won't boot bootable cdroms and I'd
like to try Gentoo so is there a floppy (1.44Mb) bootdisk image
somewhere that I can get started?
You could
On Sat, Jun 21, 2003 at 08:35:43PM +, Florian Huber wrote:
On Sat, 21 Jun 2003 20:52:36 +0200
[EMAIL PROTECTED] (by way of Bjarke Bruun [EMAIL PROTECTED])
wrote:
Hi there
I have a scsi cdrom drive that won't boot bootable cdroms and I'd
like to try Gentoo so is there a floppy
Hi,
Nachricht vom Samstag, 21. Juni 2003, 20:52:36:
I have a scsi cdrom drive that won't boot bootable cdroms and I'd like to try
Gentoo so is there a floppy (1.44Mb) bootdisk image somewhere that I can
get started?
http://www.toms.net/rb/
Timo
--
[EMAIL PROTECTED] mailing list
On Saturday 21 June 2003 11:52, [EMAIL PROTECTED] wrote:
Hi there
I have a scsi cdrom drive that won't boot bootable cdroms and I'd like to
try Gentoo so is there a floppy (1.44Mb) bootdisk image somewhere that
I can get started?
Thanks
--
Bjarke Bruun - E-mail: [EMAIL PROTECTED]
sorry about the post being in the past.. my clock was messed up
On Fri, 2003-06-20 at 16:07, gerrynjr wrote:
Well, I can't help with the scsi cdrom boot problem, but users with IDE
cdrom drives and systems that can't boot directly from cd can use the
image on bug 19548
HI,
Nope, the nvidia-driver package is not installed.
CFLAGS:
CFLAGS=-mcpu=athlon-mp -O3 -pipe
CFLAGS=-march=athlon-mp -O3 -pipe
USE:
USE=X gtk gnome -alsa arts avi berkdb cdr cjk crypt cups dga doc dvd
esd evo flash fb ggi gif gphoto2 gtk gtkhtml innodb ipv6 java jikes jpeg
kde kerberos
I have still the same message after emerging textutils-2.0.19-r1 :-(
Martin
Le Samedi 21 Juin 2003 19:57, François Dupoux a écrit :
Hi,
This errors does not come from automake/autoconf. You installed the new
version of the head program, which make it bug:
head -1 works with textutils-2.0,
On Friday 20 June 2003 19:21, Gëzim wrote:
Greetings,
If you go to http://www.blender3d.org/, you can
clearly see that version 2.27 is out. The thing is
though that when I do emerge -pv blender this is the
output:
These are the packages that I would merge, in order:
Calculating
Drewbian wrote:
Hi all,
I am interested in trying e17 and was wandering if it would be best to
emerge e or enlightenment-cvs ?
thank you in advance
drewbian
--
[EMAIL PROTECTED] mailing list
emerge enlightenment-cvs
However, I would suggest that you checkout from cvs and build it from
source
On Sat, 21 Jun 2003 12:16:40 -0400
Chris I [EMAIL PROTECTED] wrote:
Or even regular parted.
It looks like parted 1.6.5 wants to pull in progsreiserfs (not
reiserfsprogs), so I'm assuming there is reiser capability in it.
The online documentation says reiser is supported.
It is.
I used it
Hi,
On Saturday 21 June 2003 23:22, Steve Fox wrote:
HI,
Nope, the nvidia-driver package is not installed.
CFLAGS:
CFLAGS=-mcpu=athlon-mp -O3 -pipe
CFLAGS=-march=athlon-mp -O3 -pipe
after a long history of suffering I decided not to compile X and progs that
are X related (like KDE) with
Hi,
after emerging blender 2.27, I tried to start it:
-
blender
[2] 9905
[EMAIL PROTECTED] klaus $ guessing 'blender' == '/usr/bin/blender'
Xlib: extension GLX missing on display :0.0.
ERROR: Unable to open Blender window
[2]+ Exit 1 blender
Hi,
When gentoo boots it says:
Warning: dma on you harddrive is turned off.
How do I turn it on?
Thanks,
ZiM
__
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
--
[EMAIL PROTECTED] mailing list
--- Ernie Schroder [EMAIL PROTECTED] wrote:
On Friday 20 June 2003 10:21 pm, Gëzim wrote:
Greetings,
If you go to http://www.blender3d.org/, you can
clearly see that version 2.27 is out. The thing is
though that when I do emerge -pv blender this is
the
output:
These are the
On Sat, Jun 21, 2003 at 04:08:48PM -0700, G?zim Hoxha wrote:
Hi,
When gentoo boots it says:
Warning: dma on you harddrive is turned off.
I don't find where in the kernel that message is coming from (did
you paste that text exactly as it appears???), but my guess is it's
complaining about a
Am Sonntag, 22. Juni 2003 01:09 schrieb Klaus D. Neumann:
Hi,
after emerging blender 2.27, I tried to start it:
-
blender
[2] 9905
[EMAIL PROTECTED] klaus $ guessing 'blender' == '/usr/bin/blender'
Xlib: extension GLX missing on display :0.0.
ERROR: Unable to
No I didn't copy it as is, there was another line that
said something that it will take more time for fckdisk
to check the drive or something like it, but I'll
check the BIOS next time I boot.
Thanks
--- [EMAIL PROTECTED] wrote:
On Sat, Jun 21, 2003 at 04:08:48PM -0700, G?zim
Hoxha wrote:
Hi,
sorry I don't anything about supermount, but
As an aside - what gui irc client should I emerge?
xchat is very good!
I think it should be started as xchat-2
^
LOL! =8-)).
--Kees
--
[EMAIL PROTECTED] mailing list
--
Makurin Roman [EMAIL
* downtime null (2003-06-20 12:28 +0200)
i just emerged Zope and it's not allowing me to login. i tried the
generated first login and i changed it with zpasswd.py, neither
worked.
Did you set 'PORT_LOGDIR=/var/log/portage' in make.conf? Then you
should have a file -zope-2.6.1.log:
,---
|
cheers
On Sun, 2003-06-22 at 08:25, Dhruba Bandopadhyay wrote:
Drewbian wrote:
Hi all,
I am interested in trying e17 and was wandering if it would be best to
emerge e or enlightenment-cvs ?
thank you in advance
drewbian
--
[EMAIL PROTECTED] mailing list
emerge
xchat is very good!
I think it should be started as xchat-2
^
LOL! =8-)).
What is so funny about it?
The program is xchat (emerge xchat) but when you try to start xchat is
cannot be found because it is xchat-2
--Kees
--
[EMAIL PROTECTED] mailing list
Am Sonntag, 22. Juni 2003 02:28 schrieb Klaus D. Neumann:
[EMAIL PROTECTED] klaus $ guessing 'blender' == '/usr/bin/blender'
Xlib: extension GLX missing on display :0.0.
ERROR: Unable to open Blender window
[2]+ Exit 1 blender
--- Eric J. Lawrence [EMAIL PROTECTED] wrote:
On Sat, Jun 21, 2003 at 04:08:48PM -0700, G?zim
Hoxha wrote:
Hi,
When gentoo boots it says:
Warning: dma on you harddrive is turned off.
...
How do I turn it on?
Thanks,
ZiM
__
Do you
On Sat, Jun 21, 2003 at 01:36:40PM +0530, Devdas Bhagat wrote:
IMAP has its own hierarchy, which has nothing to do with the filesystem
hierarchy.
I've been having some similar issues with IMAP (using courier-imap,
squirrelmail both from portage). Can anyone point me to some docs which
describe
On Saturday 21 June 2003 08:56 pm, Gëzim wrote:
--- Eric J. Lawrence [EMAIL PROTECTED] wrote:
On Sat, Jun 21, 2003 at 04:08:48PM -0700, G?zim
Hoxha wrote:
Hi,
When gentoo boots it says:
Warning: dma on you harddrive is turned off.
...
How do I turn it on?
Thanks,
On Sat, Jun 21, 2003 at 04:08:48PM -0700, Gzim Hoxha wrote:
When gentoo boots it says:
Warning: dma on you harddrive is turned off.
How do I turn it on?
Maybe this is a long shot, but..
I had this problem immediately after I recompiled a kernel. I had
accidentally turned off Generic
On Sat, Jun 21, 2003 at 09:07:07PM -0400, Owen Gunden wrote:
On Sat, Jun 21, 2003 at 01:36:40PM +0530, Devdas Bhagat wrote:
IMAP has its own hierarchy, which has nothing to do with the filesystem
hierarchy.
I've been having some similar issues with IMAP (using courier-imap,
squirrelmail
Someone suggested this:
# hdparm -d1 /dev/hda
# /etc/init.d/hdparm start
# rc-update add hdparm default
So I did it, then restarted but nope, same error.
Then I checked what Owen said, but those were compiled
into the kernel already.
Anyone wanna tell me what dma is anyway? Do I need it?
If not
On Sat, Jun 21, 2003 at 06:59:21PM -0700, G?zim Hoxha wrote:
Someone suggested this:
# hdparm -d1 /dev/hda
# /etc/init.d/hdparm start
# rc-update add hdparm default
So I did it, then restarted but nope, same error.
Then I checked what Owen said, but those were compiled
into the kernel
Hi again,
I was gonna do a simple wallpaper in THE GIMP, but
then I realized I needed some fonts--truetype of
course. I had some in my ~ so I thought it shouldn't
be hard to get them working--I was WRONG. What I did
was uncommented the line
FontPath /usr/X11R6/lib/X11/fonts/TrueType/ in
In your BIOS see if you have both IDE channels (primary and seconday)
enabled. For some systems you can't set the DMA for one channel unless boht
are enabled in the BIOS. Once you do that hdparm will work. You can see it
on boot up - the messages list dma as being used.
DMA is a faster way
I tried looking for ide channels in the BIOS but I
found not such things!!
--- Brett I. Holcomb [EMAIL PROTECTED]
wrote:
In your BIOS see if you have both IDE channels
(primary and seconday)
enabled. For some systems you can't set the DMA for
one channel unless boht
are enabled in the
I emerge GCC 3.3 and emerge stopped working;
bash-2.05b$ sudo emerge -Du world
python2.2: /lib/libgcc_s.so.1: version `GCC_3.3' not found (required by
/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3/libstdc++.so.5)
Any ideas?
Mark
--
Mark Saunders [EMAIL PROTECTED]
Cytek Pty Ltd
--
[EMAIL
sorry for the double post...
ln -s /usr/lib/gcc-lib/i686-pc-linux-gnu/3.3/libgcc_s.so.1
libgcc_s-3.0.4.so.1
seemed to make the problem go away.
is there something missing from the ebuild for GCC 3.3?
Mark
On Sun, 2003-06-22 at 14:49, Mark Saunders wrote:
I emerge GCC 3.3 and emerge stopped
Turn off RenderAccell.
You're running nvidia drivers aren't you... ;]
On Thu, 2003-06-19 at 21:23, Chris van der Pennen wrote:
Is anyone else getting weird icon corruption with the latest testing
gtk2?
Or is it just me being halfway through emerge -e world? ;)
Chris
--
[EMAIL
I've gotten to emerge -u world in the install(right before setting the
timezone). the update of pam-login 3.11 fail because I forgot to set the
month in the BIOS clock, so it think it's April now, pam-login won't
install because the files it create is older than the installer, how do
I solve this
78 matches
Mail list logo
