I think u are using DHCP for eht1. If you give it a static IP address
you wouldn't see that problem.
Prabhat
Kurt Bechstein wrote:
>I have an hp laptop with a National Semiconductor ethernet controller in
>it which works perfectly. I'm also running the latest version of
>mm-sources. Sometimes w
http://gcc.gnu.org/onlinedocs/
Chris Graves wrote:
OK, so some folks swear by "-O3" optimizations, but alot of what I've
read suggests "-O2" produces "faster" binaries.
I have a Pentium III (coppermine) @ 900MHz with 512M RAM and 1G swap.
What CFLAGS do I want? (questionably unstable optimizat
I guess, you will need to create a fat32 partition for data exchange and use
Mozilla email client.
Keep your emails on the fat32 partition.
I am assuming that LINUX and windows both can write on that partition.
let me know, if it works.
Prabhat
Sami Salonen wrote:
>I have a dual setup with Gen
try transcode
emerge transcode
http://www.theorie.physik.uni-goettingen.de/~ostreich/transcode/html/index.html
Good luck
Prabhat
Paul Stear wrote:
>Hi all,
>I have some mpeg2 files that I want to include into my DV film at the
editing
>stage.
>Is this possible? The mpegs are 720x576 pal format
as root:
kbdrate -r 30 -d 250
Petric Frank wrote:
>Hello,
>
>how to change the typematic rate / delay of a keyboard ?
>
>Actually i have a repetition rate of about 1/sec. And there is no
setting in
>the BIOS (Phoenix).
>
>regards
> Petric
>
>
>--
>[EMAIL PROTECTED] mailing list
>
>
>
>
--
[EM
It is possible. I was doing same thing for 3-4 months.
except I had a Cable Modem :)
U have to use netfilter/IPtables. Your gentoo box will act as a firewall.
You can use "shorewall" to setup the router and also a firewall.
compile netfilter into kernel then
emerge iptables
emerge shorewall
read th
may be you should emerge gcc
Michael W. Holdeman wrote:
I am having a problem with a machine that I started out as a 1.2 machine, then
a few months ago upgraded it to 1.4 using the instructions on teh web site.
Everything had been working fine, then suddenly I am unable to emerge
anything, I g
Thanks Brian
I am sorry about the thread :(
Prabhat
Brian Richardson wrote:
On October 6, 2003 01:49 pm, Prabhat Gupta wrote:
Hi,
I have following in my local.start
kbdrate -r 30 -d 250
still, I have to give the same command (as root) everytime I boot into
KDE ( I don't have GNOME).
Hi,
I have following in my local.start
kbdrate -r 30 -d 250
still, I have to give the same command (as root) everytime I boot into
KDE ( I don't have GNOME).
What can I do to fix this.
Thanks in advance!
Prabhat
--
[EMAIL PROTECTED] mailing list
http://www.gentoo.org/dyn/pkgs/net-firewall/iptables.xml
Prabhat Gupta wrote:
emerge iptables
HvR wrote:
i wanted to set up shorewall firewall but noticed that i dont have
the iptables module compiled in my gentoo-sources kernel, what do i
turn on in the kernel config to make it compile
emerge iptables
HvR wrote:
i wanted to set up shorewall firewall but noticed that i dont have the
iptables module compiled in my gentoo-sources kernel, what do i turn
on in the kernel config to make it compile it?
i have tried a bunch of stuff but either it still doesnt compile or
the com
Hi,
Can I delete files in
/usr/portage/distfiles
to same some space??
Thanks
Prabhat
--
[EMAIL PROTECTED] mailing list
try using enscript program.
Brian Richardson wrote:
Hello,
I'm trying to print some text documents with multiple pages per sheet.
However, these options on the printer's property sheet. Could anybody suggest
what may be missing? My printer, a Lexmark Optra E+ supports PostScript.
Thanks,
Bria
I think, open file
/var/cache/./virtual
and edit
sys-kernel line ot only include installed kernels.
oom wrote:
greets to all who are wise and curious!
something strange is going on, I can't see why gentoo wants to emerge
the ck-sources, I am not using them (at least not now and ummerged t
If you do a RAID 0 setup you will get a performance boost. It's a good idea.
Walther The Writer wrote:
I beleive I have hardware ATA RAID controller, becuase when I'm booting up with gentoo
doataraid kernel option
the setup says it is detected and when I do modprobe ataraid, no errors appear. Wh
Great job!
I will try that sometime.
Prabhat
Paul Varner wrote:
All:
Being a big fan of SuSE before coming to Gentoo, I was interested to note
that gentoo had RedHat kernel sources, but not SuSE sources. Since I have
always preferred the stability of the SuSE kernel over RedHat's [I know it's
I agree
Bjorn Sodergren wrote:
Open Source/GPL , free meaning no $$ needed, or gotta-pay for it, it doesn't
matter as long as the tool you're using is the right tool for the job.
If you insist on using the wrong tools ONLY because you think it is
un-ethical to use non-free software, you should re
Jason Cooper wrote:
Senectus - ([EMAIL PROTECTED]) scribbled:
LOL.. sounds like a challenge..
:-)
I know its OT.. But I couldn't help it.. after your like epilogue.. I
remembered this :
(Not written by me)
Gospel of Tux unearthed (long)
[Helluva snip]
Now may you code in the power of
www.dpreview.com
is also good for information.
Prabhat
Anthony Floyd wrote:
On Thu, 25 Sep 2003 14:13:46 -0400
gabriel <[EMAIL PROTECTED]> wrote:
[snip]
a good place to look for quality comparisions is google. i found a site
through there that compared any camera out there to any other cam
Hi,
I recently upgraded the system:
emerge -u system(~x86)
Now I am getting touble, compiling super-freeswan with the newly
upgraded gcc-3.3.1
Can some make a binay package for it and post it on the web?
I have pentium 4 laptop.
Can I downgrade the system using following:
env USE='x86' em
drwxr-xr-x2 root root 4096 Aug 24 2001 anacron
drwx--3 daemon daemon 4096 Aug 24 2001 at
drwx--2 root root 4096 Mar 8 2001 cron
drwxr-xr-x2 root root 4096 Aug 30 2000 fax
drwxr-xr-x3 root root 4096 Aug 24 2001
Trying hitting key board during boot up.
This happens on my laptop, hp ze5158. The keyboard stops working when
the kernel loads some USB modules.
But if I keep pressing the key duing that module load, the keyboard
works file.
Prabhat
Mike Williams wrote:
-BEGIN PGP SIGNED MESSAGE-
Has
Dave,
I did repatch the kernel and also build the driver. I didn't do make
mrproper though.
The wireless connection works but I have to stop it and then start again.
/etc/init.d/net.eth1 stop
/etc/init.d/net.eth1 start
Prabhat
David Mallwitz wrote:
Prabhat Gupta wrote:
I am using:
I am using:
http://ruslug.rutgers.edu/~mcgrof/802.11g/
dirver for that PCMCIA card. There is a dependency in the
/etc/init.d/net.eth1 for PCMCIA.
I don't know what else to add there :(
Prabhat
[EMAIL PROTECTED] wrote:
On Tue, Sep 23, 2003 at 02:38:09PM -0400, Prabhat Gupta wrote:
H
I upgraded to GS-SOURCES
Prabhat Gupta wrote:
Hi,
I installed a netgear 802.11g card on my laptop for wireless access.
With latest vanilla-source (~x86) everything was working fine.
Then, I changed the kernel to latest gentoo-sources (~x86). Now the
wireless connection doesn't co
Hi,
I installed a netgear 802.11g card on my laptop for wireless access.
With latest vanilla-source (~x86) everything was working fine.
Then, I changed the kernel to latest gentoo-sources (~x86). Now the
wireless connection doesn't connect automatically after boot. I have
added it to the defau
Hi All,
I am trying to install a VNP for last 3 night with no luck :)
I am using latest gentoo-sources (~x86). I enabled the IPSec in kernel
and emerged super-freeswan. I am getting alot of errors while starting
the ipsec. I noticed that the freeswan version in the gentoo-sources is
1.97. Als
Hi,
I am planning to buy a desktop for (home) video editing and off course I
will do a lot of compiling, listening to music etc.
What processor would be good:
1. Pentium 4 with Hyper Threading
2. Pentium 4 (plain vanilla)
3. Athlon XP
I would like you hear your expereince with this.
Best rega
What if I CAN'T boot from CD :(
Regards
Prabhat
Pat Kerwan wrote:
On Mon, Jul 28, 2003 at 11:58:21AM -0400, Prabhat Gupta wrote:
Hi Vano,
Can you give me little more detail on the procedure. Here is my
understanding:
1. Untar the stagex in /xxx/slow/ on fast machine
2. chroot
-base
9. Go to slow machine
10. WHAT NEXT ?? The slow machine has a swap parition and a ROOT
parition. I have not used rsync. How to boot the slow machine?
Thanks for your help
Prabhat
Vano D wrote:
On Fri, 2003-07-25 at 18:01, Prabhat Gupta wrote:
You'll be lucky to get XFree an
Thanks Andrew.
Regards
PRabhat
Andrew Gaffney wrote:
Prabhat Gupta wrote:
You should set:
MAKEOPTS="-j2"
DISTCC_HOSTS="fastmachine/2"
FEATURES="ccache distcc"
where fastmachine is the hostname or ip of the fastermachine. The
'/2' means it can accept 2
[/SINP]
You should set:
MAKEOPTS="-j2"
DISTCC_HOSTS="fastmachine/2"
FEATURES="ccache distcc"
where fastmachine is the hostname or ip of the fastermachine. The '/2'
means it can accept 2 jobs at once.
Should I install ccache also? Which one should I install first ccache or
distcc?
What set wi
Andrew Gaffney wrote:
Prabhat Gupta wrote:
wow!!
Looks like I will get some improvement. I have a 2.4G HP laptop with
gentoo installed.
So what I will do now it to omit the localhost form
DISTCC_HOSTS
What should be my "-j" value for this senario? 2??
Typically its CPUs + 1,
7;m going to build my new firewall/router. I'll leverage
all my fast boxes to build the system and leave it completely out of the
DISTCC_HOSTS line...it's only a 200MHz and I've got 2.0, 2.4, 1.8,
1.6GHz to throw at the real work.
-Rob
On Fri, 25 Jul 2003 14:35:11 -0400, Pra
binuntils-2.14.(forgot) / distcc-2.8) which is the current stable build
environment.
-Rob
On Sat, 26 Jul 2003 01:11:29 +0900, Jason Stubbs wrote
On Saturday 26 July 2003 01:00, Prabhat Gupta wrote:
Ciaran McCreesh wrote:
Prabhat Gupta wrote:
I am looking for ideas to red
Condon Thomas A KPWA wrote:
Prabhat,
Sometime it feels good to debug using DDD rather using plain gdb.
I can see that. I'm running full SuSE 8.0 on a Thinkpad 770 at home, with
the usual KDE, so the 760 should be able to handle it, too. I've got to
admit, though, that I do most of my
Jason Stubbs wrote:
On Saturday 26 July 2003 00:48, Prabhat Gupta wrote:
Condon Thomas A KPWA wrote:
Prabhat Gupta wrote:
Hi All,
I am trying to install a minimal gentoo on an IBM Thinkpad 760XL.
The laptop has 1.6G free space on ROOT partition. Currently I am
bootstrapping the
Douglas Russell wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Friday 25 July 2003 4:48 pm, Prabhat Gupta wrote:
Condon Thomas A KPWA wrote:
Prabhat Gupta wrote:
Hi All,
I am trying to install a minimal gentoo on an IBM Thinkpad 760XL.
The laptop has 1.6G free space on
Ciaran McCreesh wrote:
Prabhat Gupta wrote:
I am looking for ideas to reduce the space requirment and also
compile time. I have only 24 hrs left for this :(
Consider using distcc to speed up compile time. I've never used it
myself, but I've heard good things about it. Better y
Jason Stubbs wrote:
On Saturday 26 July 2003 00:39, Håvard Wall wrote:
Prabhat Gupta wrote:
Hi All,
I am trying to install a minimal gentoo on an IBM Thinkpad 760XL.
The laptop has 1.6G free space on ROOT partition. Currently I am
bootstrapping the system.
I want a minimal system to
Condon Thomas A KPWA wrote:
Prabhat Gupta wrote:
Hi All,
I am trying to install a minimal gentoo on an IBM Thinkpad 760XL.
The laptop has 1.6G free space on ROOT partition. Currently I am
bootstrapping the system.
I want a minimal system to do some C++ development. I need GCC, make,
CVS
Håvard Wall wrote:
Prabhat Gupta wrote:
Hi All,
I am trying to install a minimal gentoo on an IBM Thinkpad 760XL.
The laptop has 1.6G free space on ROOT partition. Currently I am
bootstrapping the system.
I want a minimal system to do some C++ development. I need GCC, make,
CVS, shells
Hi All,
I am trying to install a minimal gentoo on an IBM Thinkpad 760XL.
The laptop has 1.6G free space on ROOT partition. Currently I am
bootstrapping the system.
I want a minimal system to do some C++ development. I need GCC, make,
CVS, shells.
I also need minimal KDE.
What should be my n
Essien Ita Essien wrote:
Ok i've tried to keep quiet but i cant anymore!!
Why dont you want to use vim? You cant type? That's the only reason i can
think of. Other than that... its power editing all the way.
sory... i couldn't help myself :D
Essien
I AM WITH YOU !
Prabhat
-Origi
type username root and hit ENTER
Mike Diehl (Encrypted email prefer red) wrote:
Hi all.
I just installed Gentoo on a machine and emerge'd webmin. I only have one
username on the machine, root, but I can't seem to get logged in. I've tried
the password many times, so I know I'm typing it in
Hi All,
I set the keyboard rate in "local.start"
by following command
kbdrate -r 30 -d 250
But the rate is reset by KDE and I have to give the command after I login.
How can I solve this?
Thanks
Prabhat
--
[EMAIL PROTECTED] mailing list
That's cool :)
Spider wrote:
begin quote
On Tue, 15 Jul 2003 10:02:51 -0400
Prabhat Gupta <[EMAIL PROTECTED]> wrote:
Hi All,
It looks like my root partition is almost used. Is it possible to move
the portage tree to some other location?
Yep, there
Hi All,
Did anyone make an ebuild for "cinepaint"
http://cinepaint.sourceforge.net/
--
P r a b h a t G u p t a
/\/\*
--
[EMAIL PROTECTED] mailing list
That's helpful
Thanks
daniel wrote:
On July 15, 2003 10:47 am, Prabhat Gupta wrote:
thanks Daniel.
Now the next question is how to download the sources in the
"/mnt/share/copyleft/distfiles"
when I update or install new packages?
they'll go the
thanks Daniel.
Now the next question is how to download the sources in the
"/mnt/share/copyleft/distfiles"
when I update or install new packages?
Thanks
PRabhat
daniel wrote:
On July 15, 2003 10:02 am, Prabhat Gupta wrote:
It looks like my root partition is almost u
Hi All,
It looks like my root partition is almost used. Is it possible to move
the portage tree to some other location?
Thanks
Prabhat
--
[EMAIL PROTECTED] mailing list
rebuild the dependencies for transcode
Bryce wrote:
Hey all, trying to use transcodw with DVD::RIP, and having an issue:
Copied by hand cause dvd::rip doesn't deal with the clipboard :( :
transcode v.0.6.8 (C) 2001-2003 Thomas Ostreich
libdvdread: Using libdvdcss version 1.2.7 for DVD access
li
put
vga=ask
in grub configuration.
Loopingz wrote:
I'm a newbie on Gentoo, i've made the
installation from stage 1, compile everything and when i reboot the system,
i see Grub then when i choose to load the linux, it seems to load the kernel,
but the screen go black
I had the same problem.
Did you emerged iptables??
Sebastian Bergmann wrote:
I'm using the Linux 2.4.20-gentoo-r5 kernel and iptables 1.2.8-r1.
When I use "iptables -L" I get
bash-2.05b# iptables -L
/lib/modules/2.4.20-gentoo-r5/kernel/net/ipv4/netfilter/ip_tables.o:
unresolved symbol nf_u
put that command into
/etc/conf.d/local.start
BTW what is -k1 option for?
Sean Bossinger wrote:
Thank you for your assistance... It is much appreciated. It was a rather duh moment for me.
Another question...
I've enabled this on my machine manually, but I want it enabled every ti
I will try vga=ask
if my wife gives me some time today on the laptop. She is really angry on
me for spending 24 hrs on computer :((
downtime null wrote:
i have all 3 of those in my .config and i still get a black screen
when i pass 'vga=791' to the kernel. i can use 'vga=ask' and pick one
urt to put them all in.
On Tue, 08 Jul 2003 13:50:49 -0400, Prabhat Gupta wrote
Hi All,
I am trying to to install gentoo for last 2 weeks. Here is my latest
problem. Last night I did a make mrproper.
Now I get a blank screen while booting but I do get KDE up and
running with NO
Hi All,
I am trying to to install gentoo for last 2 weeks. Here is my latest
problem. Last night I did a make mrproper.
Now I get a blank screen while booting but I do get KDE up and running
with NO mouse. I use a USB wheel mouse.
In the kernel settings,
input devices
HID keyboard > e
"Prabhat" == Prabhat Gupta <[EMAIL PROTECTED]> writes:
Prabhat> Hi All, I spend almost 2 weeks now compiling and recompiling
Prabhat> gentoo. It'w working now but when I try to start Shorewall I
Prabhat>
Hi All,
I spend almost 2 weeks now compiling and recompiling gentoo. It'w
working now but when I try to start Shorewall I get some unresolved
symbols in ip_table.o
I have compiled the ip_table as module in kernel and also enabled
support for netfilter (replaces ipchains)
Thanks
--
P r a b h a t
60 matches
Mail list logo