I think localhost is assigned to 127.0.0.1, or did i misunderstood
something?
No, that's (usually) correct. But in the route excerpt you've cited
above (please post route -n next time!) the route for localhost was
set to dev eth0. Also, the subnet was a /24 one, instead of the
usual /8 for
Browsing getoo-wiki.com for an image viewer, I only found Gthumb, which
depends on GNOME. I use Fluxbox because I have an older computer and would
like to keep dependencies at a minimum. Any suggestions? I only need a
viewer; organising my pictures is not a plus. No exotic formats, just jpeg,
gif
Send the output from iptables-save, please. Otherwise we could only
guess if the problem is with your firewall rules or somewhere else.
Here we go!
# Generated by iptables-save v1.3.5 on Mon Jan 15 19:09:43 2007
*mangle
:PREROUTING ACCEPT [0:0]
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT
I think localhost is assigned to 127.0.0.1, or did i misunderstood
something?
No, that's (usually) correct. But in the route excerpt you've cited
above (please post route -n next time!) the route for localhost was
set to dev eth0. Also, the subnet was a /24 one, instead of the
usual /8 for
Another thing that makes me wonder is that the home router guide did
nothing mention about name_servers or gateways.
According to the guide this line seems to be enough:
config_eth0=( 192.168.0.2 broadcast 192.168.0.255 netmask 255.255.255.0 )
But without the routes setting i get network
- is forwarding actually really enabled? Just cat the
relevant /proc/sys/net/ipv4/ip_forward.
cat /proc/sys/net/ipv4/ip_forward
returns 1
So remaining things to check would be
- where do packets do what? Use tcpdump on the router to monitor
how packets flow. Don't cite all the output, but
Hi,
I have a similar problem like Dale in this thread [gentoo-user] Need
help networking two machines, but i think it is not exactly the same.
I was trying to set up a home router following the
gentoo-home-router-guide
http://www.gentoo.org/doc/de/home-router-howto.xml
with shorewall as
I used this script a long time ago. It worked until iptables got
changed. It still worked but it gave a few errors. Maybe some guru can
look at this and update it for us both. Then maybe I can get someone to
upgrade the script on the site. I had to edit the very first bit about
which
Are you on dial-up too? The EXTIF='ppp0' may need to be eth0 for you if
you are using a DSL or cable connection.
I use an adsl-modem to connect to the internet. It is configured over
eth1 but the connection runs over ppp0 so i think this is right, but i
am not sure.
--
gentoo-user@gentoo.org
2006/12/17, Michael Sullivan [EMAIL PROTECTED]:
Can anyone suggest a simple, easy-to-use software package for light
editing of video files (cutting commercials out of MythTV recordings).
I tried to use avidemux, but it went into an infinite loop when I tried
to save the file after editing.
Latin has the four cases Nominative, Genitive, Dative, Accusative and
additionally the Vocative and the Ablative. I haven't seen any other
languages with six cases. As you can imagine, it's quite tiring to learn
Latin. :-\
Just for your information.
There are languages with more cases for
Hi,
I recognized this some time ago!
When my system is up to date emerge -pvuND world shows me:
emerge -pvuND world
These are the packages that would be merged, in order:
Calculating world dependencies... done!
Total size of downloads: 0 kB
Which is normal because an up to date
Actually, with the 'emptytree' option, it should be trying to rebuild
everything in your 'world' set along with the dependancies using their
current versions and use flags. I'm guessing that the odd behavior is
because you're using it in conjunction with 'uND'. 'Update' and
'newuse' go
I have already stated that I don't think that such a thing exists. Now what I
do is to not change my profile before
# emerge -uvpDNt
doesn't what to emerge anything. Then immediately after changing the profile
I run the same command again and that makes it quite clear which use flags
Thanks guys, I hadn't looked into the 2006.1 directory to see the
desktop/server permutations. I am sorry to hear xmms is coming to an end -
it has served me really well on my old machines. Is there an accord on a
current suitable alternative? I found xmms relatively light on resources
Everytime when gentoo introduces a new profile as now 2006.1 there are
some use flag changes. After i switch to the new profile and do an
emerge -uND world there are several packages affected by this changes.
So i normally go through the output and look if there are changes i
did not want and add
It is a usb stick so it has a vfat file system. However, I've reformat
the stick with fdisk to ext2 filesystem. With vfat it has 978mb
capacity now after formating is to ext2 it has a 913mb capacity.
Is there a way to create dos (vfat) partition with Linux fdisk utility?
As far as i know
A note for everybody who uses gensplash and splashutils. After i
deleted the device files and rebooted the silent mode refused to work.
So i decided to reemerge splashutils. But this is not necessary. After
installing, the ebuild checks for missing devices, which was in my
case /dev/tty1.
Here
Neil Bothwick schrieb:
On Sat, 26 Aug 2006 10:55:31 +0200, Daniel Pielmeier wrote:
But what? Is it possible that /dev/tty1 is not in place at these early
moments of booting when it is needed by splashutils?
Yes, because the splash stuff runs before udevstart, so you need a static
device
I have mine set to no and it is full of stuff. According to Konqueror
it has 654 files and 13 folders. Is that right? That is a lot of stuff.
I think it is.
After setting RC_DEVICE_TARBALL to no and removing everything except
/dev/console and /dev/null by using the gentoo live-cd, the
Benno Schulenberg schrieb:
It is specifically checking for the No medium found message. To
be able to do that, the hdparm script should set LC_ALL=C itself.
Time to report a bug.
okay it's here:
http://bugs.gentoo.org/show_bug.cgi?id=144407
--
gentoo-user@gentoo.org mailing list
Thanks to all who helped me with this issue, especially Richard who lead
me to this bug.
Daniel
--
gentoo-user@gentoo.org mailing list
Hi all,
a few days ago rkhunter starts with this message:
rkhunter -c
Rootkit Hunter 1.2.8 is running
Determining OS... Unknown
Warning: This operating system is not fully supported!
Warning: Cannot find md5_not_known
All MD5 checks will be skipped!
before all was fine, but now he
Hmm, i thought i searched enough before posting to this list.
Anybody who has the same problem will find information about this here.
http://bugs.gentoo.org/show_bug.cgi?id=127783
http://forums.gentoo.org/viewtopic-t-197663-start-0.html
Daniel Pielmeier schrieb:
Hi all,
a few days ago
Doesn't anybody have a clue?
Or did anyone receive this message, because i heard of messages which
get lost on this list!
Thanks,
Daniel
2006/8/17, Daniel Pielmeier [EMAIL PROTECTED]:
Hi all,
it seems that the configuration of /etc/conf.d/hdparm has changed.
With the new baselayout i only
Andrew Frink wrote:
Daniel,
I think there are some settings in /etc/conf.d/hdparm that control if
just hard disks or both get options changed.
Andrew
P.S. I'm not at my Linux box so I can't say for sure
Dale schrieb:
Just in case his is different, this is what mine says:
#
Good question. I don't use hdparm since mine are fast without it. It
should work though. You may want to make sure the all_args= line is
commented out. May be that it is using that since it is the last line
it reads.
Not real sure though.
Dale
:-) :-)
hmm i have commented all out, only
Richard Fish schrieb:
On 8/18/06, Daniel Pielmeier [EMAIL PROTECTED] wrote:
so when my settings are correct, why doesn't the hdparm init-script
apply this settings to my dvd-rom devices /dev/hdc and /dev/hdd
Try adding set -x at the top of the hdparm init script, and then
'stop' and 'start
after i took a more cleary look at the messages i found out that hdparm
did not work on boot up and when i try to start/stop the init-script by
using sudo, but when i log in as root and run the script it shows me:
/etc/init.d/hdparm start
* Running hdparm on /dev/hda ... [ ok ]
* Running
Richard Fish schrieb:
Are you starting hdparm in the boot or default runlevel (rc-update
-s)? If at boot, it may be that some modules haven't been loaded yet,
so you don't actually have hdc/hdd.
it starts in default runlevel, but i think with the new baselayout it
starts ealier then before.
Sorry, I missed the 'doesn't work under sudo' part.
Can you post the output with the set -x option when run under sudo?
okay here comes something strange
[EMAIL PROTECTED] ~ $ LC_ALL=de_DE.utf8
[EMAIL PROTECTED] ~ $ sudo /etc/init.d/hdparm stop
[EMAIL PROTECTED] ~ $ sudo /etc/init.d/hdparm
so i think it is not a problem between sudo and root, for root my
default locale is en_US for me as normal user it is de_DE.utf8 so it
seems to be a problem with the locales
--
gentoo-user@gentoo.org mailing list
Hi all,
it seems that the configuration of /etc/conf.d/hdparm has changed.
With the new baselayout i only get my harddiscs configured by the hdparm
init-script, but not my dvdrom-devices
starting the hdparm init-script gives me:
/etc/init.d/hdparm start
* Running hdparm on /dev/hda ...
How do you know whats linked against firefox?
run revdep-rebuild and everything that needs recompiled will be done.
if you just want to know the reverse dependencies go to
http://gentoo-portage.com and search for firefox, down below the
different firefox versions which are in portage you can
Hi,
after my last emerge -avuND world portage wants to install gcc-3.4.6:
emerge -avuND world
These are the packages that would be merged, in order:
Calculating world dependencies... done!
[ebuild NS ] sys-devel/gcc-3.4.6-r1 USE=fortran gtk nls -bootstrap
-boundschecking -build -doc -gcj
sorry for the noise.
i must have removed the the gcc-4.1.1 entry in package.keywords by mistake.
gcc-4.1.1 has
=dev-libs/gmp-4.2.1
=dev-libs/mpfr-2.2.0_p10
as dependencies but not the stable gcc-3.4.6 which portage wants to
install because of the missing keyword.
--
gentoo-user@gentoo.org
When I emerge it, it complains that it can't find any JDK but I have
this
under /opt:
blackdown-jdk-1.4.1
blackdown-jdk-1.4.2
blackdown-jdk-1.4.2.01
blackdown-jdk-1.4.2.03
What am I doing wrong?
I had projectx working with blackdown-jdk, now i use sun-jdk and
projectx still works.
Generally I find that I want to cut at a major transition - eg the
adverts coming on. At a major transition there is usually an I-Frame.
Maybe it is the german tv as for many movies i have recorded i have to
cut on B- and P-Frames to avoid pictures from the adverts.
--
gentoo-user@gentoo.org
is there a light-weight MPEG2 editor (preferable in portage)? I don't
need anything fancy, just something to cut off a bit at the begin and
the end of a file.And no, kino doesn't like MPEG2.
If you don't care about the quality of the cutted scenes projectx, is
what i reccommend.
But projectx
Requested 'gnome-vfs-2.0 = 2.14.2' but version of gnome-vfs is 2.12.2
maybe this is apackage ordering problem and you have to install gnome-vfs first
emerge --oneshot =gnome-vfs- 2.14.2
--
gentoo-user@gentoo.org mailing list
If you just want to cut out commercials i recommend you ttcut, it is
only designed for this purpose. Ttcut is able to cut the video
frame-accurate and not only on I-Frames.
It doesn't appear to do that here, the Cut-In button is ghosted for most
frames, so I end up cutting slightly off fro
Do you know of a decent graphical program for editing DVB files. All I
really need is to be able to cut out commercials etc. A command line
program would do, but graphical would be easier.
@ Neil
If you just want to cut out commercials i recommend you ttcut, it is
only designed for this
help you.
Let me know,
Rohit
On 4/6/06, Daniel Pielmeier [EMAIL PROTECTED] wrote:
Is there nobody out there who has experience regarding to this topic. I
googled a lot to get it working and until now i don't find anything out
why it doesn't work anymore!
--
gentoo-user@gentoo.org
Hi Meino,
What do I with this *.ebuild?
When I look into /usr/portage/* I find a lot more files in conjunction
with a certain *.ebuild, which seem to handle the build and handling
of applikations to be installed. Do I need some more files for this
applikation? How can I handle this certain
Is there nobody out there who has experience regarding to this topic. I
googled a lot to get it working and until now i don't find anything out
why it doesn't work anymore!
Thank you in advance!
Daniel
Daniel Pielmeier schrieb:
Hi,
i have configured tv-out some time ago. It worked fine
Hi Meino,
as Bo mentioned before qt is slotted so you can have qt3 and qt4
installed on the same system.
Just unmask qt in /etc/portage/package.keywords.
For me it works like a charm, i don't think that a chroot environment
is necessary!
Hth Daniel
--
gentoo-user@gentoo.org mailing list
Hi,
i have configured tv-out some time ago. It worked fine, but now it
doesn't anymore.
Normally i activate tv-out by opening a new screen with
X -screen Screen1 :1 -ac sleep 2; DISPLAY=:1 xterm
Now the tv gaves a short flicker and the picture which appears normally
on my tv shows up on
Hi!
If you just want to remove the adds from your recordings, i recommend
ttcut at http://ttcut.tritime.org/ it is not in portage and depends on
qt-4. Ttcut is able to cut frame accurately, so you can cut on I-, P-
and B-Frames.
I have written an ebuild, you will find it at
Hello,
i had the same problem recently, updating to the latest nvidia.driver
1.0.8178-r3 works for me. You have to to put nvidia-kernel and
nvidia-glx in your /etc/portage/package.keywords cause it is ~x86.
Hth Daniel
Konstantinos Agouros schrieb:
Hi,
is it possible that these two are not
Thank you both,
i think i understood what you mean, i will try to move and resize the
screen ouput to the right size and position with xvidtune.
Btw: i have a 19 LCD.
But i am still wondering about that i maybe have mistaken something in
my kernel-config.
Daniel
--
gentoo-user@gentoo.org
Thank you all,
in the end xvidtune works. I roughly shifted and resized my screen and
then all of a sudden it calibrats itself. Then i used the output of
xvidtune in xorg.conf and now all works fine.
Daniel
--
gentoo-user@gentoo.org mailing list
Hello,
when i shutdown my computer two failures are popping up.
* Stopping hpiod ...
start-stop-daemon: warning: failed to kill 13172: No such process
start-stop-daemon: warning: failed to kill 13168: No such process
* Stopping hpssd ...
* Stopping eth0
* Bringing down eth0
* Stopping
Thank you,
@Ian
i have the old 2.6.14-r5 kernel with nvidia 1.0-6629 in /boot and in
grub.conf, this configuration works.
But i don' think it is necessary to check this out, because as i
mentioned before, i have the displacement with the old and the new
nvidia-driver. So i think it is a
It is not just the displacement, as i mentionend before the picture is
unsharp in some places too. Could this also be fixed with xvidtune.
The auto button is for an adustment on your monitor? If so, then
you can fix the X server displacement by creating a better modeline
with xvidtune.
Hi,
@Ian
Xvidtune doesn't work for me, it is not only the displacement in all
directions (mainly horizontally), additionally the picture is not sharp
in some places.
@All
Isn't there another solution out there, i have updated my kernel many
times before and it always works, i think there must be
Hi,
does anyone have a clue?
Thank you.
Daniel Pielmeier schrieb:
Hello,
after the last sync portage wants to reinstall transcode with new use
flags.
These are the packages that I would merge, in order:
Calculating world dependencies
!!! Packages for the following atoms are either all
I solved this problem myself, it was just a syntax failure in
/etc/portage/package.use
--
gentoo-user@gentoo.org mailing list
Hello,
i solved my problems concering the nvidia-driver and the splash-theme delay.
Nvidia-driver works after upgrading to 1.0.8178-r3 and the splash-theme
starts immediately after the boot message as i updated my kernel to
2.6.15.gentoo-r4.
But one problem still remains, the display is
Hello,
i solved my problems concering the nvidia-driver and the splash-theme delay.
Nvidia-driver works after upgrading to 1.0.8178-r3 and the splash-theme
starts immediately after the boot message as i updated my kernel to
2.6.15.gentoo-r4.
But one problem still remains, the display is
Hello,
after the last sync portage wants to reinstall transcode with new use flags.
These are the packages that I would merge, in order:
Calculating world dependencies
!!! Packages for the following atoms are either all
!!! masked or don't exist:
gnome-extra/medusa
...done!
[ebuild R ]
Hello,
i solved my problems concering the nvidia-driver and the splash-theme delay.
Nvidia-driver works after upgrading to 1.0.8178-r3 and the splash-theme
starts immediately after the boot message as i updated my kernel to
2.6.15.gentoo-r4.
But one problem still remains, the display is
Hello,
after the last sync portage wants to reinstall transcode with new use flags.
These are the packages that I would merge, in order:
Calculating world dependencies
!!! Packages for the following atoms are either all
!!! masked or don't exist:
gnome-extra/medusa
...done!
[ebuild R ]
Thank you,
first i tried the NvAGP thing but it didn't work, so i decided to
upgrade to nvidia 1.0.8178-r3, now i can log in with gdm to my
gnome-session as usual.
--
gentoo-user@gentoo.org mailing list
FB_SOFT_CURSOR
Any suggestions concering this problem?
Thanks in advance
Daniel Pielmeier
--
gentoo-user@gentoo.org mailing list
you in advance
Daniel Pielmeier
--
gentoo-user@gentoo.org mailing list
I have enabled the following options under
-Device Drivers -Graphics support
in my kernel config.
Support for framebuffer devices
VESA VGA Graphics Support
- VESA driver type vesa-tng
Support for the framebuffer splash
Richard Fish schrieb:
On 2/5/06, Daniel Pielmeier [EMAIL
Thank you,
but will this solve also my problem with the nvidia-driver?
Jose Maria Alvarez Fernandez schrieb:
This is solved in -r2:
+gentoo-sources-2.6.15-r2.ebuild:
Update to Linux 2.6.15.2. Some minor security fixes. Update sky2 to v0.15.
Enable libata ATAPI (i.e. SATA CDROM) support
Under /usr/portage/media-video/xine-ui i find the
xine-ui-0.99.4-r3.ebuild and stable it is stable too.
KEYWORDS=~alpha amd64 ~hppa ppc ppc64 sparc x86
I am running gentoo on x86 so i think it has to be stable.
I have no masked xine-ui versions in
/etc/portage/package.mask
Febrero de 2006 21:05, Daniel Pielmeier escribió:
Thank you,
but will this solve also my problem with the nvidia-driver?
Jose Maria Alvarez Fernandez schrieb:
This is solved in -r2:
+gentoo-sources-2.6.15-r2.ebuild:
Update to Linux 2.6.15.2. Some minor security fixes. Update sky2 to
v0.15
Thank you,
in one portage overlay i use there are three ebuilds
media-video/xine-ui-0.99.4-r3
media-video/xine-ui-0.99.4-r2
media-video/xine-ui-0.99.3-r1
and they are all marked ~x86.
In the nomal portage tree i have only one ebuild
media-video/xine-ui-0.99.4-r3
and it is marked x86.
I have
Not sure but, do you mean adding or editing this line in xorg.conf
Jose Maria Alvarez Fernandez schrieb:
El Domingo, 5 de Febrero de 2006 23:28, Daniel Pielmeier escribió:
I use the latest stable version 1.0.6629-r5 is tit safe to use 1.0.8178-r3?
then you may try this:
Option NvAGP 1
Thank you for your suggestions,
i know the article and so i know qdvdauthor.
I don't know if qdvdauthor is capable of creating a animated menu from
a series of pictures.
My picture source is a image i downscaled to the size of 720x1000. I
have manually extracted pictures from this one with the
Thank you,
i know this article, there i found this method
convert matrix_menu_background.jpg ppm:- | ppmtoy4m -n50 -F25:1 -A59:54
-I p -r -S 420mpeg2 | mpeg2enc -n p -f8 -b5000 -a3 -o
matrix_menu_background.m2v
here i can make a menu from only one image, how can i change this
commandline to
ok i found it out for myself, it works for me with this commandline
for i in *.jpg; do convert $i ppm:- ; done | ppmtoy4m -n50 -F25:1
-A59:54 -I p -r -S 420mpeg2 | mpeg2enc -n p -f8 -b5000 -a3 -o
matrix_menu_background.m2v
--
gentoo-user@gentoo.org mailing list
Thank you,
found it out a few hours ago, it works fine with
i=1; while [ $i -le 762 ]; do convert -crop 720x576+$i+0 walpergen.jpg
$i.jpg; i=$[$i+1]; done
Iain Buchanan schrieb:
On Wed, 2006-01-11 at 18:56 +0100, Daniel Pielmeier wrote:
My picture source is a image i downscaled
Hi,
has anybody experience regarding this topic, i tried it with mjpegtools,
but in the conversion stopped with a segmentation fault.
Here is the output:
jpeg2yuv -n 1 -I p -L 1 -f 25 -j %03d.jpg -b 001.jpg| mpeg2enc -f 8 -o
image.m2v
INFO: [mpeg2enc] SETTING EXTENDED MMX for MOTION!
hello all,
i want to test some other windowmanagers and if i find one that
satisfies me i want to switch from the gnome-desktop to this
windowmanager. So how can i remove all gnome packages. Is it save to
remove all gnome-base and gnome-extra packages and run emerge depclean
and revdep-rebuild.
and gnome even gnome-light is to big for me.
Regards Daniel
Holly Bostick schrieb:
Daniel Pielmeier schreef:
hello all,
i want to test some other windowmanagers and if i find one that
satisfies me i want to switch from the gnome-desktop to this
windowmanager. So how can i remove all gnome
There is still the question how i can remove the additional packages
(mentioned before) i have installed but which are not dependencies of
gnome-light.
Neil Bothwick schrieb:
On Sun, 08 Jan 2006 15:36:52 +0100, Holly Bostick wrote:
emerge (-av) any of the packages that you may want to keep
Thank you for your suggestions, i will try them!
Unmerging gnome-light + the dependencies and manually searching for the
additional files in the world-file.
--
gentoo-user@gentoo.org mailing list
Hello,
i recently installed K3B.
When i start the application a window pops up and says something like
cdrdao will run without root privileges, use k3b-setup to solve this
problem.
The problem is on my system there is no such setup-tool.
I have Gnome installed but no KDE, is the K3B-setup only
if i run equery i get no results
gentoo billie # equery belongs /usr/bin/k3bsetup
[ Searching for file(s) /usr/bin/k3bsetup in *... ]
gentoo billie #
Francesco Talamona schrieb:
On Saturday 07 January 2006 23:28, Daniel Pielmeier wrote:
Hello,
i recently installed K3B.
When i start
Thank you all for your help.
I was just a little confused about the message, because as holly said
k3b works fine even with this message.
Holly Bostick schrieb:
Daniel Pielmeier schreef:
Hello,
i recently installed K3B.
When i start the application a window pops up and says something like
Hello,
i have created the folder /video with the following rights:
drwxrwxrwx 11 vdr video 4096 5. Jan 23:09 video
I am member of the video group but not the user vdr.
In nautilus i can create subfolders and files, rename, cut, copy and
paste them, but i can not delete any files or
hello,
i mean i can not put the files into the trash, a window pops up and says
i have not the right access-rights.
Alexander Skwar schrieb:
Daniel Pielmeier wrote:
In nautilus i can create subfolders and files, rename, cut, copy and
paste them, but i can not delete any files or folders
hello,
i mean i can not put the files into the trash, a window pops up and says
i have not the right access-rights.
Alexander Skwar schrieb:
Daniel Pielmeier wrote:
In nautilus i can create subfolders and files, rename, cut, copy and
paste them, but i can not delete any files or folders
Thank you,
i have changed the attributes for the video folder but not for the trash
folder on this partition. I changed them and can now delete the files.
Alexander Skwar schrieb:
Daniel Pielmeier schrieb:
hello,
i mean i can not put the files into the trash, a window pops up and says
i have
501 - 587 of 587 matches
Mail list logo
