Re: ENDEVOR help support

Hi Thank you , I find the proper support with this link. Scott Fagen wrote: On Fri, 11 Dec 2009 12:49:02 +0100, Miklos Szigetvari wrote: Any contact address to CA and ENDEVOR in Europe ? http://www.ca.com/us/support/phone.aspx (Don't worry about the "us" in the URL, it is a l

Re: Logging of PDS(E) member opens ???

Hi I have asked the same a month ago, and we are usning now an SMF DUMP exit to log record 42 (subtypes 21 24 25). Lorne Dudley wrote: Does anyone have code that will log access to PDS members by jobname, stepname, etcetera, or suggestions as to how to develop such code, or model code th

Re: problem w/ "allocate" cmnd within a REXX

You need to talk to your SMS colleagues. If the ACS routine assigns a STORCLAS, then your data set will be SMS managed and there is nothing you can do about it. ACS routines usually decide on dsname and possibly on some other attributes whether to put this data set under SMS control. Your SMS f

Re: Logging of PDS(E) member opens ???

Have a look at eventaction from Action Software.It not only log, it prevents access, backup changed members, etc. Itschak On Wed, Dec 16, 2009 at 10:01 AM, Miklos Szigetvari < miklos.szigetv...@isis-papyrus.com> wrote: > Hi > > I have asked the same a month ago, and we are usning now an SMF DUMP

Backup the VTOC after any file deleted or adding extent.

Coming soon, keeping the vtoc data after any vtoc update. How I do that? Using the replication feature of MFNetDisk, any tracks changes send to PC. The PC checks if the update is to the VTOC, if yes it will creates copy of the vtoc in PC and keep generations of the vtoc for all the volsers req

Re: Need a way to syntax check IDCAMS control cards

On Mon, 14 Dec 2009 16:44:08 -0500, Duane Reaugh wrote: >Does anyone know a way to get IDCAMS to syntax check (but not run) a set >of control cards. Sort of a TYPERUN=HOLD but for control cards. The only JobScan from ASG does quite a good job: 05 //CPYSKIP EXEC PGM=IDCAMS 06 //SYSPRINT

ICKDSF QUESTION -

Good Morning Gentle Readers,   I am trying to build the SYS1.VTOCIX on __ Make your browsing faster, safer, and easier with the new Internet Explorer® 8. Optimized for Yahoo! Get it Now for Free! at http://downloads.yahoo.co

ICKDSF QUESTION - BUILDIX

Good Morning Gentle Readers,   I am trying to build the SYS1.VTOCIX on a 3390-3.  For some unknown reason the VTOC index was de-indexed.  I was abled to build the SYS1.VTOCIX on other volumes but for some reason when I try to do the same on this volume it doesn't work.  Any suggestions? Below is

Re: ICKDSF QUESTION - BUILDIX

Try this /* //STEP01 EXEC PGM=ICKDSF,REGION=4M,PARM='NOREPLYU' //SYBSS1 DD UNIT=SYSALLDA, // VOL=SER=SYBSS1,DISP=SHR //SYSPRINT DD SYSOUT=* //SYSIN DD * BUILDIX IXVTOC,DDNAME(SYBSS1) /* 2009/12/16 esmie moo > Good Morning Gentle Readers, > > I am trying to build the SYS1.VTOCIX on a

Re: ICKDSF QUESTION - BUILDIX

The error indicates that the Sys1.vtocix does not exist, therefore use the following: DISP=NEW,SPACE=(CYL,(1)) replacing the disp=shr you are currently using. Thank You, Dave O'Brien NIH Contractor From: esmie moo [esmie_...@yahoo.ca] Sent: Wednesday, Dec

Re: ICKDSF QUESTION - BUILDIX

David,   Your suggestion worked.  Thanks very much.   Thanks to all who responded with your suggestions. --- On Thu, 12/17/09, O'Brien, David W. (NIH/CIT) [C] wrote: From: O'Brien, David W. (NIH/CIT) [C] Subject: Re: ICKDSF QUESTION - BUILDIX To: IBM-MAIN@bama.ua.edu Received: Thursday, Dece

Re: old manuals

Brian, I would be happy to help your friend. Tell him to drop me an email at jr...@syncsort.com. John Reda Syncsort Incorporated -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Brian Westerman Sent: Wednesday, December 16, 2009 12:23 A

Steven Liston/IS/SLC/StandardLifeGroup is out of the office.

I will be out of the office starting 16/12/2009 and will not return until 17/12/2009. Please contact the TST MF mailbox for any urgent requests. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to l

Re: ICKDSF QUESTION - BUILDIX

David,   I noticed in the job output the following (after I changed the jcl to DISP=NEW):   IEC614I SCRATCH FAILED - RC 008, DIAGNOSTIC INFORMATION IS (04180036), ,SYBSS1,SYS1.VTOCIX.SYBSS1   IEF142I ICKDSF15 STEP01 - STEP WAS EXECUTED - COND CODE  

Re: Logging of PDS(E) member opens ???

Hi Miklos ! Thank you. The manual shows Subtype 23 -- Member Delete Subtype 24 -- Member Add/Replace Subtype 25 -- Member Rename I see now that my question was not precise enough, so I will restate it. Does anyone have code that will log every open of a PDS member, showing PDS name, PDS mem

Re: ICKDSF QUESTION - BUILDIX

Check ISMF to see if Indexing is enabled. If it is, move on. Thank You, Dave O'Brien NIH Contractor From: esmie moo [esmie_...@yahoo.ca] Sent: Wednesday, December 16, 2009 8:17 AM To: IBM-MAIN@bama.ua.edu Subject: Re: ICKDSF QUESTION - BUILDIX David, I no

Re: Could DSNAME length restriction be bypassed if catalog allowed longer ALIAS names?

> -Original Message- > From: IBM Mainframe Discussion List > [mailto:ibm-m...@bama.ua.edu] On Behalf Of Howard Brazee > Sent: Tuesday, December 15, 2009 2:53 PM > To: IBM-MAIN@bama.ua.edu > Subject: Re: Could DSNAME length restriction be bypassed if > catalog allowed longer ALIAS names? >

Re: Could DSNAME length restriction be bypassed if catalog allowed longer ALIAS names?

On Tue, 15 Dec 2009 15:07:13 -0600, Kline, Martin wrote: >Steve wrote: >>Assume that the real file name is 44 characters long and that is the way >>it is held in the VTOC. >> >>Now, let's assume that you do not have permission to that file. BUT, you >>know that if you build a "long name" that use

SYSTEM COMPLETION CODE=102 REASON CODE=0000000C

Hi, I have been spending days try to resolve this message originally I thought it was something I had done in a PC rtn following this message As the message in the DUMP following is PRIMARY NOT EQUAL TO HOME But now I am convinced that its IEAVPST that is going cross memory that c

Re: Logging of PDS(E) member opens ???

Hi We were interested only in update/delete/rename, first used the SMF record type 15 ,but here we don't find the member name in many cases. There is also the IFG0EX0B open exit , I have an old sample, we used to recognize that a dataset was compressed via IEBCOPY. Lorne Dudley wrote:

Re: ICKDSF QUESTION - BUILDIX

Try DISP=(NEW,KEEP) > Date: Wed, 16 Dec 2009 05:17:43 -0800 > From: esmie_...@yahoo.ca > Subject: Re: ICKDSF QUESTION - BUILDIX > To: IBM-MAIN@bama.ua.edu > > David, > > I noticed in the job output the following (after I changed the jcl to > DISP=NEW): > > IEC614I SCRATCH FAILED - RC

PSATOLD = 0 when under "PRB" !?!?

I was looking back in the archives at posts discussing PSATOLD being zero. The one thing pointed out is, in a dump, when processing by IPCS, one could see PSATOLD for a processor being zero. The problem is, we are examining PSATOLD while running. We are not using SRBs directly, so our code

Re: Console Routing Codes

Thanks Dave -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of David Waldman Sent: Wednesday, December 16, 2009 10:08 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Console Routing Codes On Wed, 16 Dec 2009 09:48:16 -0600, Rabbe, Luke wrote: >I

Re: problem w/ "allocate" cmnd within a REXX

thanks to all who responded to my original post. as was suggested, yes, the solution was to contact our SMS staff and get them to modify their stuff. thank you to one and all. /s/ tuco bonno ; graduate, college of Conflict Management; University of Southeast Asia; "I partied on the Ho Chi Minh

Re: NEON sues IBM

What's to keep IBM from just changing their methods of charging for licenses? They already have 24 different ways. Edward Jaffe Sent by: IBM Mainframe Discussion List 12/15/2009 03:51 PM Please respond to IBM Mainframe Discussion List To IBM-MAIN@bama.ua.edu cc Subject Re: NEON sues IB

Re: So About those Consoles on the z10 HMC

Thanks for the great assist and for considering the problem. The issue is not getting the x3270 consoles to appear and connect on the physical HMC, that works fine mostly. The issue occurs when we access the HMC remotely using a browser; the x3270 sessions active on the physical HMC do not appear

Re: SYSTEM COMPLETION CODE=102 REASON CODE=0000000C

Hi In my old PC routine, I have a SAC 0 (SYSSTATE ASCENV=P) before the XMPost Joe Reichman wrote: Hi, I have been spending days try to resolve this message originally I thought it was something I had done in a PC rtn following this message As the message in the DUMP following is

Re: Console Routing Codes

On Wed, 16 Dec 2009 09:48:16 -0600, Rabbe, Luke wrote: >I have two questions: > >1. Are the routing codes 1-128 documented anywhere? > >2. Is the 7 byte routing codes field (offset 2) in the hardcopy log documented anywhere? Chapter 1 in the the MVS Systems Messages Manual Volume 1 has some

Re: ICKDSF QUESTION - BUILDIX

I didn't see my response, so I've sent it again. If a dupe, I apologize. SYS1.VTOCIX.SYBSS1 Seems like you missed a 'V' in the DSN, it should be SYS1.VTOCIX.VSYBSS1 instead of SYS1.VTOCIX.SYBSS1 |__ -

Re: PSATOLD = 0 when under "PRB" !?!?

Thompson, Steve wrote: So the question that I have is, under what conditions can PSATOLD be zero? From days gone by, this would seem to be some kind of dispatching bug if this is not set prior to dispatching a program that is PRB based. Our code uses PSATOLD=0 as a way to check whether we're

Re: Logging of PDS(E) member opens ???

Shameless plug: http://www.actionsoftware.com/ -- Regards, Gord Tomlin Action Software International (a division of Mazda Computer Corporation) Tel: (905) 470-7113, Fax: (905) 470-6507 Itschak Mugzach wrote: Have a look at eventaction from Action Software.It not only log, it prevents access,

Re: PSATOLD = 0 when under "PRB" !?!?

-Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Edward Jaffe Sent: Wednesday, December 16, 2009 11:08 AM To: IBM-MAIN@bama.ua.edu Subject: Re: PSATOLD = 0 when under "PRB" !?!? Thompson, Steve wrote: > So the question that I have is, under

Re: Console Routing Codes

Also, look under WTO in mvs authorized assembler services reference manual. ,ROUTCDE=(routing code) Specifies the routing code or codes to be assigned to the message. The routing codes are: ┌─┬──┐ │ Message │ Defin

Re: ICKDSF QUESTION - BUILDIX

SYS1.VTOCIX.SYBSS1 You missed a 'V' in the DSN, it should be SYS1.VTOCIX.VSYBSS1 |__ Jack Kelly 202-502-2390 (Office) -- For IBM-MAIN subscribe / signoff / archive access instruction

Console Routing Codes

I have two questions: 1. Are the routing codes 1-128 documented anywhere? 2. Is the 7 byte routing codes field (offset 2) in the hardcopy log documented anywhere? I can't find them. Luke -- For IBM-MAIN subscribe / signof

Re: problem w/ "allocate" cmnd within a REXX

but there?s no further info on HOW to use DATACLAS to bypass sms. There is no way to bypass SMS with Dclass unless there's a check in the StorClas ACS to check on the Dclass name. I believe that your quote indicates that you can use Dclass with non SMS DSN but not the other classes. The StorCl

Re: ICKDSF QUESTION - BUILDIX

On Wed, 16 Dec 2009 10:26:54 -0500, John Kelly wrote: > >SYS1.VTOCIX.SYBSS1 > > You missed a 'V' in the DSN, it should be SYS1.VTOCIX.VSYBSS1 >|__ >Jack Kelly >202-502-2390 (Office) That is a standard convention that most people use, but is not require

Re: ICKDSF QUESTION - BUILDIX

So, to summarize: If there is an indexed VTOC and you want it turned OFF, code the following: //STEP1EXEC PGM=ICKDSF,PARM='NOREPLYU' //SYSPRINT DD SYSOUT=* //VTOC DD UNIT=SYSDA,VOL=SER=xx,DISP=OLD, // DSN=SYS1.VTOCIX.xx //SYSINDD * BUILDIX DDNAME(VTOC) OSVTOC

Re: ICKDSF QUESTION - BUILDIX

-Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of esmie moo Sent: Wednesday, December 16, 2009 7:18 AM To: IBM-MAIN@bama.ua.edu Subject: Re: ICKDSF QUESTION - BUILDIX David, Esmee, The "scratch failed" error is because if you just supply DI

Re: PSATOLD = 0 when under "PRB" !?!?

Steve There is that pseudo-SRB mode state that Peter Relson talked about 18months ago. Is your code recovery related? Rob Scott Developer Rocket Software 275 Grove Street * Newton, MA 02466-2272 * USA Tel: +1.617.614.2305 Email: rsc...@rs.com Web: www.rocketsoftware.com -Original Message

Re: ICKDSF QUESTION - BUILDIX

Why not make it simple and run the SAME JCL all the time? ... //BUILDIX EXEC PGM=ICKDSF,PARM='NOREPLYU' //SYSPRINT DD SYSOUT=* //INIT01 DD DSN=SYS1.VTOCIX.INIT01,DISP=(MOD,KEEP), // UNIT=SYSALLDA,VOL=SER=INIT01,SPACE=(CYL,1) //SYSINDD* BUILDIX DDN

Re: SYSTEM COMPLETION CODE=102 REASON CODE=0000000C

Joe, Is your PC a space-switch ? Have you verified the PASN and HASN before the XM POST? Have you taken an SVC dump with both the PASN and HASN included and verified the storage? How did you locate the ASCB for the target address space? Does the ECB really exist in the private storage (an

CEL4MCHK report

We used VHM to detect memory leaks and got few entries which had the following, Unmatched ALLOCATE of 11848 bytes at address 0x3927C028 - sequence 59311 Called from: 366aaaf8 +00d2 MemAlloc Called from: 366aa9e0 +00c6 Me

Re: ICKDSF QUESTION - BUILDIX

Dan, I was trying to teach without being a minimalist. Besides, that doesn't handle turning it off and/or deleting it as it is turned off. As for the same JCL comment, I use skeleton JCL from my own utility that builds it for me by my specification of OS, IX or NEWIX. :-) Bob -Original

Re: SYSTEM COMPLETION CODE=102 REASON CODE=0000000C

Thankx for the reply to my desprate call for help Anyway just browsed sys1.maclib POST and didn't notice special code genaration for AR e.g a LAM instruction but it's worth a shot (setting SYSSTATE ASCENV=P ) As my test program seems to work Thankx again Sent from my iPhone On Dec 16, 2009,

Re: PSATOLD = 0 when under "PRB" !?!?

> From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On > Behalf Of Edward Jaffe > Sent: Wednesday, December 16, 2009 11:08 AM > To: IBM-MAIN@bama.ua.edu > Subject: Re: PSATOLD = 0 when under "PRB" !?!? > > Thompson, Steve wrote: > > So the question that I have is, under what condit

SMS Failure when allocating Large JES2 Hasp space

I am trying to create a 10,000 Cyl HASPACE on a NON Sms managed volume and get the following error IGD17051I ALLOCATION FAILED FOR DATA SET SYS1.HASPACE , PRIMARY SPACE EXCEEDS 65535 TRKS What do I need to setup in SMS to allow the crea

Re: SMS Failure when allocating Large JES2 Hasp space

You need to code in your allocation JCL, DSNTYPE=LARGE _ Dave Jousma Assistant Vice President, Mainframe Services david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB1G p 616.653.8429 f 616.653.8497 -Original Mess

Re: SYSTEM COMPLETION CODE=102 REASON CODE=0000000C

Thankx for the reply as a side note I appreciate all of your help re: TCP/IP 1) I have verified PASN = HASN By looking at PSAAOLD and control register 4 for that CPU 2) I save the traget ASCB in CSA using PSAAOLD my control block is chained off my SSCB (SSCTUSE) I just look for my 4 character

Re: SMS Failure when allocating Large JES2 Hasp space

Thanks - That worked. I had it in my notes but not in the JCL I was using. Dhuh Lizette >You need to code in your allocation JCL, DSNTYPE=LARGE > >_ > > > >I am trying to create a 10,000 Cyl HASPACE on a NON Sms managed volume and

Re: PSATOLD = 0 when under "PRB" !?!?

On Wed, 16 Dec 2009 09:56:58 -0500 "Thompson, Steve" wrote: :>I was looking back in the archives at posts discussing PSATOLD being :>zero. :>The one thing pointed out is, in a dump, when processing by IPCS, one :>could see PSATOLD for a processor being zero. :>The problem is, we are examining P

Re: Logging of PDS(E) member opens ???

On Wed, 16 Dec 2009 08:19:18 -0500 Lorne Dudley wrote: :>I see now that my question was not precise enough, so I will restate it. :>Does anyone have code that will log every open of a PDS member, showing :>PDS name, PDS member name, jobname, stepname, etcetera, or suggestions :>as to how to dev

Re: PSATOLD = 0 when under "PRB" !?!?

-Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Binyamin Dissen Sent: Wednesday, December 16, 2009 12:54 PM To: IBM-MAIN@bama.ua.edu Subject: Re: PSATOLD = 0 when under "PRB" !?!? On Wed, 16 Dec 2009 09:56:58 -0500 "Thompson, Steve" wrote:

Re: PSATOLD = 0 when under "PRB" !?!?

-Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Rob Scott Sent: Wednesday, December 16, 2009 12:05 PM To: IBM-MAIN@bama.ua.edu Subject: Re: PSATOLD = 0 when under "PRB" !?!? Steve There is that pseudo-SRB mode state that Peter Relson talke

Re: SYSTEM COMPLETION CODE=102 REASON CODE=0000000C

Joe, Make sure the ECB is on a fullword boundary. Brian IBM Mainframe Discussion List wrote on 12/16/2009 01:27:13 PM: > [image removed] > > Re: SYSTEM COMPLETION CODE=102 REASON CODE=000C > > Joe Reichman > > to: > > IBM-MAIN > > 12/16/2009 01:28 PM > > Sent by: > > IBM Mainframe Discuss

Re: PSATOLD = 0 when under "PRB" !?!?

Thompson, Steve wrote: I'm just baffled. Jim Mulder made the best suggestion of all. Force a dump when the condition occurs and look at the SYSTRACE. -- Edward E Jaffe Phoenix Software International, Inc 5200 W Century Blvd, Suite 800 Los Angeles, CA 90045 310-338-0400 x318 edja...@phoeni

Re: SYSTEM COMPLETION CODE=102 REASON CODE=0000000C

I declared it. DS F. That would automatically force alignment Thankx Sent from my iPhone On Dec 16, 2009, at 1:54 PM, Brian Smith wrote: Joe, Make sure the ECB is on a fullword boundary. Brian IBM Mainframe Discussion List wrote on 12/16/2009 01:27:13 PM: [image removed] Re: SY

Re: SYSTEM COMPLETION CODE=102 REASON CODE=0000000C

Joe, Key8 CSA - yuk - I cannot think of any good reasons for it. Do you have an SVC dump? What is the PSW before you XMPOST ? (Cos you have to be one (or more) of APF/Key0-7/Sup to issue XMPOST with ASCB + ECBKEY). Have you verified the plist passed to POST? What does the systrace show ?

Re: Does SAC 0 make PASN = HASN = SASN

Took me about 37 seconds, then I got it. Well said. -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Vernooij, CP - SPLXM Sent: 15. joulukuuta 2009 14:13 To: IBM-MAIN@bama.ua.edu Subject: Re: Does SAC 0 make PASN = HASN = SASN 127.0.0.1

Re: Logging of PDS(E) member opens ???

Hello Binyamin ! Thank you for that information. I was aware that a PDS could be opened without a member but not the other case. Could you detail how that is done ? (one member can be opened and then different members processed without a re-open? ) My application is reasonably simple. I w

Re: Logging of PDS(E) member opens ???

On Wed, 16 Dec 2009 15:02:45 -0500 Lorne Dudley wrote: :>I was aware that a PDS could be opened without a member but not the :>other case. :>Could you detail how that is done ? :>(one member can be opened and then different members processed without a :>re-open? ) Using BPAM and POINT. :>My

PDS member logging

Hi Binyamin ! Thanks for the update. Regards Lorne -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua

Re: Logging of PDS(E) member opens ???

> -Original Message- > From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On > Behalf Of Binyamin Dissen > Sent: Wednesday, December 16, 2009 3:23 PM > To: IBM-MAIN@bama.ua.edu > Subject: Re: Logging of PDS(E) member opens ??? > > On Wed, 16 Dec 2009 15:02:45 -0500 Lorne Dud

Re: SMS Failure when allocating Large JES2 Hasp space

This is the JCL I use to allocate a HASPACE data set to occupy an entire volume. I just think it's "cool" to use MXIG Brian //STEP01 EXEC PGM=IEFBR14 //SSPX0W DD DSN=SYS1.NEW.HASPACE,DISP=(NEW,KEEP), // DSNTYPE=LARGE, // SPACE=(CY

Re: Logging of PDS(E) member opens ???

On Wed, 16 Dec 2009 16:47:10 -0500, Farley, Peter x23353 wrote: > >I would have thought that IBM code (JES included) would have long since >been converted to use DESERV (or the internal equivalent) to allow code >and data to reside above the line and run AMODE=31, for VSCR reasons if >no other. > A

Re: SMS Failure when allocating Large JES2 Hasp space

Brian, Thanks, that is very cool MXIG requests that the largest contiguous free space area on the volume be allocated if it is equ

Logging of PDS(E) member opens

I have confirmed that SMF14 records do not contain member information based on JES2 opens of PROCLIB. So ... I will be looking at JES2 exits to do the task. Does anyone have some JES2 exit model code in this area. I'm thinking I would like to scan JCL for PROC names and SMF log the results.

Re: Logging of PDS(E) member opens

>Does anyone have some JES2 exit model code in this area. I'm thinking I would like to scan JCL for PROC names and SMF log the results. Before you do that, consider that SMF Jobstep records (type4 & type 30 sub-type 4) contain PROC and STEP. I don't recall if they contain the user specified pr

Re: Logging of PDS(E) member opens

Thanks for the tip Ted ! I'll check that out. Ted MacNEIL wrote: Does anyone have some JES2 exit model code in this area. I'm thinking I would like to scan JCL for PROC names and SMF log the results. Before you do that, consider that SMF Jobstep records (type4 & type 30 sub-type 4) contain P

Re: SYSTEM COMPLETION CODE=102 REASON CODE=0000000C

I finally got it working Apparently IEAVPST does like an ECB in CSA or CSA key=8 When I pointed the ECB to WS_DSECT or SP=0 private it worked LA RX,WS_ECB ST RX,CSA_KEY8_ECB store address In Posted program L RX,ASCB LARY,CSA_KEY8_ECB L RY,0

Re: PSATOLD = 0 when under "PRB" !?!?

On Wed, Dec 16, 2009 at 1:07 PM, Edward Jaffe wrote: > Thompson, Steve wrote: > >> I'm just baffled. >> >> > > Jim Mulder made the best suggestion of all. Force a dump when the condition > occurs and look at the SYSTRACE. > > If PSATOLD == 0 *FOR THE CU

SMF30 record length

Hi list, We have 2 lpars in sysplex,one is for production,the other is for development,both are in zos1.9. Recently we noticed the smf datasets' size have huge difference, and we found the main reason is the type 30 record length is different.Any idea of the reasons? below is one sample from SMFDU

Re: SYSTEM COMPLETION CODE=102 REASON CODE=0000000C.. ECB != -> Task storage ????

I just started thinking This doesn't make sense I tested this scenario with the ECB pointing to SP 241 Rob (Scott) Edward (Jaffe) Forgot one more piece of info The Wait occurs Under a Different Task (TCB) Then were SP 241 was obtained The 241 was obtained Under the Main Task Before I Cre

IBM Press Release: New Mainframe Customer in Korea

BC Card, Korea's largest credit card company, has announced they have selected IBM System z: http://www.ibm.com/press/us/en/pressrelease/29040.wss The company is implementing System z10, z/OS, CICS Transaction Server, DB2 for z/OS, WebSphere Application Server for z/OS, and other related software

Re: SMF30 record length

Check the SMFPRMxx members of both systems for differences in the DDCONS parameter. This consolidates I/O sections, but is usually disabled because of the large CPU costs and elapsetime of the consolidation, mostly a problem for DB2. Kees. "Cobe Xu" wrote in message news:<232683dd0912161945v3