Re: Looking for help understanding an FTP problem

always up to my butt in some other mess of > alligators so I just moved on from the FTP problem at the time. Yesterday > and today I set out to try to nail it down and I am looking for help in > understanding what I am seeing. All FTP clients and servers in the > discussion below are on re

Re: Looking for help understanding an FTP problem

On 5 May 2021 11:13:21 -0700, in bit.listserv.ibm-main (Message-ID:<0ceb01d741da$50264400$f072cc00$@mcn.org>) charl...@mcn.org (Charles Mills) wrote: >My FTP client succeeds when the port is 1025, 1026, 1027, ... etc. until it >gets to port 2240, when the dialog looks like > >EZA1736I GET

Looking for help understanding an FTP problem

I have been seeing intermittent FTP failures in a particular environment and when they occurred I was always up to my butt in some other mess of alligators so I just moved on from the FTP problem at the time. Yesterday and today I set out to try to nail it down and I am looking for help

Re: Help with APA - Application Performance Analyzer

. Colin On Tue, 13 Apr 2021 at 19:37, Phil Smith III wrote: > Colin Paice wrote about using APA successfully. > > > > I sure wasn't meaning to diss APA-it did help. I just remember finding that > it wasn't granular enough for us. We have an underlying toolkit that has > many layers

Re: Help with APA - Application Performance Analyzer

I believe its an enhanced version of inspect from omegamon z/os. It monitors where the cpu is spending its time in the code by sampling the restart psu for AS you are monitoring. It was created as a bet by an old mate of mine, a few moons ago.

Re: Help with APA - Application Performance Analyzer

Colin Paice wrote about using APA successfully. I sure wasn't meaning to diss APA-it did help. I just remember finding that it wasn't granular enough for us. We have an underlying toolkit that has many layers, so it tends to jump around a lot in there, doing not a lot in each layer. That made

Re: Help with APA - Application Performance Analyzer

I used it about 10 years ago. We only looked at hot hot spots. Small hot spots close to the background level, could change from day to day depending on other usage. For example are the instructions/data cached in the local processor? Changing the amount of optimization of the C code made a big

Re: Help with APA - Application Performance Analyzer

Colin Paice wrote: >I dont think it matters which machine you run on, you just run for a longer >time, and get more samples that way. There was, IIRC, also a maximum time for the sampling. What we wound up with was insufficient; as I noted, it was a while ago. Perhaps we missed something.

Re: Help with APA - Application Performance Analyzer

I dont think it matters which machine you run on, you just run for a longer time, and get more samples that way. I would suggest you run it on the same machine as production so you get true samples. The hardware can change, for example the MVCL instruction used to be slow on one machine, and

Re: Help with APA - Application Performance Analyzer

Of Colin Paice Sent: Monday, April 12, 2021 9:25 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help with APA - Application Performance Analyzer It used to be a separately orderable product. It was developed by another company, and badged by IBM. it provides the same functions as Strobe. For example

Re: Help with APA - Application Performance Analyzer

This might be obvious, but if you can, you generally want to run APA on the slowest system you own, because modern machines are too bloody fast: it can have trouble identifying hotspots because it only goes to (I think) 100K samples per second, and that's not enough. At least, that's what ISTR

Re: Help with APA - Application Performance Analyzer

Yea, its not a freebie either. charged just like fault analyzer, File manager, debug.as Jerry mentioned it is bundled, which is what we have done. -- For IBM-MAIN subscribe / signoff / archive access instructions, send

Re: Help with APA - Application Performance Analyzer

Paice Sent: Monday, April 12, 2021 9:25 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help with APA - Application Performance Analyzer It used to be a separately orderable product. It was developed by another company, and badged by IBM. it provides the same functions as Strobe. For example 1

Re: Help with APA - Application Performance Analyzer

Lizette, APA does not do iSeries. It is strictly z/OS. Pierre. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Help with APA - Application Performance Analyzer

Separately priced. And yes, it is much like stone. ITschak בתאריך יום ב׳, 12 באפר׳ 2021 ב-19:16 מאת Lizette Koehler < stars...@mindspring.com>: > List - > > > > Does anyone know if the APA comes with z/OS ? If so what versions of z/OS? > > > > Is it similar to iSTROBE for analyzing application

Re: Help with APA - Application Performance Analyzer

It used to be a separately orderable product. It was developed by another company, and badged by IBM. it provides the same functions as Strobe. For example 1. Hot spots... in code Module/csect down to 64 bytes granularity 2. Which DB2 queries are taking most elapsed time, and CPU time

Re: Help with APA - Application Performance Analyzer

: Monday, April 12, 2021 12:17 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Help with APA - Application Performance Analyzer This message was sent from an external source outside of Western & Southern's network. Do not click links or open attachments unless you recognize the sender and know the cont

Help with APA - Application Performance Analyzer

List - Does anyone know if the APA comes with z/OS ? If so what versions of z/OS? Is it similar to iSTROBE for analyzing application tasks? I am reading the manuals, but I just wanted to see if it was a separate order or included in z/OS Thanks Lizette

Re: Help with Dead Letter Queue Maintenance

on behalf of Steve Horein Sent: Wednesday, March 31, 2021 6:16 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help with Dead Letter Queue Maintenance [CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don’t click links or open attachments as it may be a Phishing email

Re: Help with Dead Letter Queue Maintenance

These actions seem helpful: https://www.ibm.com/support/knowledgecenter/SSLTBW_2.3.0/com.ibm.zos.v2r3.halw001/ezd1826i.htm On Wed, Mar 31, 2021 at 5:57 PM Lizette Koehler wrote: > I am not a network/tcpip person > > > > I have seen messages indicating my Dead Letter queue is almost full > > >

Help with Dead Letter Queue Maintenance

I am not a network/tcpip person I have seen messages indicating my Dead Letter queue is almost full How do I manage it? I found the USS path to the directory I have 3 mails in there that are huge. Can I use OMVS or ISPF 3.17 and just delete the entries? Or is there another

If you are thinking: How can IBM’s latest programming languages offer additional value to help you modernize core business applications on z/OS? Join us in our upcoming event to learn more.

: COBOL, Automatic Binary Optimizer, PL/I, C/C++, Java, Node.js, Python and, Go) can help you modernize these applications on z/OS to create more value, develop new applications to augment digital experiences, and reduce operating costs. Register here: https://event.on24.com/eventRegistration

Re: wc3270 or NOTEPAD++ help

@LISTSERV.UA.EDU Subject: Re: wc3270 or NOTEPAD++ help Gil, I can't tell whether these are real questions or arguments. As arguments I don't know enough to respond to most of them, but I'll treat them as actual requests for information and then respond "I don't know" in some cases: G> How do yo

Re: wc3270 or NOTEPAD++ help

Gil, I can't tell whether these are real questions or arguments. As arguments I don't know enough to respond to most of them, but I'll treat them as actual requests for information and then respond "I don't know" in some cases: G> How do you get your 50 files to the desktop side? And right

Re: wc3270 or NOTEPAD++ help

I do the same. XMIT rules. :-) It can be uploaded/downloaded using IND$FILE as well as ftp. It can be viewed and unpacked on PC side (I don't know a tool for update). Finally XMIT can contain any dataset you want. Especially XMIT can contain PDS FB 80, but the members can be also XMIT files

Re: wc3270 or NOTEPAD++ help

? Some versions have scripting. Try pressing "escape" then type "help scripting" but it depends on how its configured. >Is there a way to cause NOTEPAD++ to combine all the files in the directory >into a single file with some separator line between each file? No but as o

Re: wc3270 or NOTEPAD++ help

I use XMIT and download/upload using binary transfer. IND$FILE supports binary. Then a TSO RECEIVE. On Mon, Feb 15, 2021 at 9:16 AM Paul Gilmartin < 000433f07816-dmarc-requ...@listserv.ua.edu> wrote: > On Sun, 14 Feb 2021 16:26:28 -0500, Bob Bridges wrote: > > >As a contractor I have to

Re: wc3270 or NOTEPAD++ help

On Sun, 14 Feb 2021 16:26:28 -0500, Bob Bridges wrote: >As a contractor I have to upload my REXX tools to a new client's mainframe >every so often, and I find FTP is unavailable for the purpose maybe half the >time. They all use different 3270 emulators, but of course the emulators >all use

Re: wc3270 or NOTEPAD++ help

As a contractor I have to upload my REXX tools to a new client's mainframe every so often, and I find FTP is unavailable for the purpose maybe half the time. They all use different 3270 emulators, but of course the emulators all use IND$FILE, and they all allow you to upload one file at a time or

Re: wc3270 or NOTEPAD++ help

...@dissensoftware.com] Sent: Friday, February 12, 2021 9:46 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: wc3270 or NOTEPAD++ help I am hoping some of you folk might have some ideas. I am trying to upload source files from a windows machine with only the above programs. I am not familiar with either. Is there a way

Re: wc3270 or NOTEPAD++ help

W dniu 12.02.2021 o 21:19, Jeremy Nicoll pisze: On Fri, 12 Feb 2021, at 20:09, Paul Gilmartin wrote: On Fri, 12 Feb 2021 19:59:09 +, Michael Brennan wrote: Just use native FTP from your PC to your mainframe. He says he has *only* "wc3270 or NOTEPAD++". On my system: C:\>where ftp

Re: wc3270 or NOTEPAD++ help

Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jeremy Nicoll Sent: Saturday, February 13, 2021 2:37 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: wc3270 or NOTEPAD++ help On Sat, 13 Feb 2021, at 21:24, Paul Gilmartin wrote: > My Windows knowle

Re: wc3270 or NOTEPAD++ help

On Sat, 13 Feb 2021, at 21:24, Paul Gilmartin wrote: > My Windows knowledge is rudimentary. What tool creates a TAR archive? I'd guess the standard linux command, if the machine had this installed: https://en.wikipedia.org/wiki/Windows_Subsystem_for_Linux (or a cygwin, or msys2 or mingw

Re: wc3270 or NOTEPAD++ help

On Sat, 13 Feb 2021 21:49:33 +0200, Binyamin Dissen wrote: > >The issue was legal, and FTP is blocked (don't ask me why .) - I could >connect, but any action would drop the connection (even in passive mode) > >But the idea of Unix tools was good. They had bash, so I converted it into a >TAR

Re: wc3270 or NOTEPAD++ help

Thanks for the responses. The issue was legal, and FTP is blocked (don't ask me why .) - I could connect, but any action would drop the connection (even in passive mode) But the idea of Unix tools was good. They had bash, so I converted it into a TAR and was able to user wc3270 file

Re: wc3270 or NOTEPAD++ help

On 2021-02-12 14:46, Binyamin Dissen wrote: I am hoping some of you folk might have some ideas. I am trying to upload source files from a windows machine with only the above programs. I am not familiar with either. Is there a way to write a wc3270 script to batch the uploads rather than do one

Re: wc3270 or NOTEPAD++ help

On Fri, 12 Feb 2021, at 20:09, Paul Gilmartin wrote: > On Fri, 12 Feb 2021 19:59:09 +, Michael Brennan wrote: > > >Just use native FTP from your PC to your mainframe. > > > He says he has *only* "wc3270 or NOTEPAD++". On my system: C:\>where ftp C:\Windows\System32\ftp.exe I'd be amazed if

Re: wc3270 or NOTEPAD++ help

ary 12, 2021 12:10 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: wc3270 or NOTEPAD++ help > > On Fri, 12 Feb 2021 19:59:09 +, Michael Brennan wrote: > > >Just use native FTP from your PC to your mainframe. > > >

Re: wc3270 or NOTEPAD++ help

On Fri, 12 Feb 2021 19:59:09 +, Michael Brennan wrote: >Just use native FTP from your PC to your mainframe. > He says he has *only* "wc3270 or NOTEPAD++". > >From: Binyamin Dissen >Sent: Friday, February 12, 2021 8:46 AM >... >I am trying to

Re: wc3270 or NOTEPAD++ help

++ help [CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don’t click links or open attachments as it may be a Phishing email, which can steal your Information and compromise your Computer.] I am hoping some of you folk might have some ideas. I am trying to upload

Re: wc3270 or NOTEPAD++ help

On Fri, 12 Feb 2021 14:22:56 -0500, Gord Tomlin wrote: > >I don't know whether the OP's lack of choice on software is due to finances or >administrative restrictions. I'm going to go ahead on the assumption that it's >a lack of dollars. > If the OP can use a (free) zip utility, the archives can

Re: wc3270 or NOTEPAD++ help

> Is there a way to cause NOTEPAD++ to combine all the files in the directory > into a single file with some separator line between each file? Binyamin Dissen, Why not use the good old DOS commands in batch to combine all the text files into a single with header of the file name? 1. Save the

Re: wc3270 or NOTEPAD++ help

On 2021-02-12 13:27 PM, Paul Gilmartin wrote: He says (astonishingly) he has*only* "wc3270 or NOTEPAD++". Wc3270 probably includes IND$FILE but not FTP. I know only one (now obsolescent) 3270 emulator which includes FTP (server!), and it never ran on Windows. If he had WinZip (which he says

Re: wc3270 or NOTEPAD++ help

On Fri, 12 Feb 2021 18:38:11 +0100, Radoslaw Skorupka wrote: >W dniu 12.02.2021 o 15:46, Binyamin Dissen pisze: >> I am hoping some of you folk might have some ideas. >> >> I am trying to upload source files from a windows machine with only the above >> programs. I am not familiar with either. >

Re: wc3270 or NOTEPAD++ help

do one at a time? Is there a way to cause NOTEPAD++ to combine all the files in the directory into a single file with some separator line between each file? Appreciate any help. In this case it would be nice to have a tool which create XMI file on PC side. Unfortunately all xmit managers I know

Re: wc3270 or NOTEPAD++ help

On Fri, 12 Feb 2021 14:50:50 +, Colin Paice wrote: >If you can create one large file on windows, and put > >./ADD LIST=ALL,NAME=MYNAME... > >between each file > It depends: o On the file attrributes. o And that the files contain no lines that look like IEBUPDTE commands. >you

Re: wc3270 or NOTEPAD++ help

c3270 script to batch the uploads rather than do > one at a time? > > Is there a way to cause NOTEPAD++ to combine all the files in the directory > into a single file with some separator line between each file? > > Appreciate any help. > > Thank you. > > -- > Binyami

wc3270 or NOTEPAD++ help

++ to combine all the files in the directory into a single file with some separator line between each file? Appreciate any help. Thank you. -- Binyamin Dissen http://www.dissensoftware.com Director, Dissen Software, Bar & Grill - Israel Should you use the mailblocks package and ex

Re: Help with Connect Direct Message

I may be wasting your time, Lizette, but one day during the runup to Y2K I lost a lot of hours over a message claiming that a file was in use. A coworker eventually guessed (correctly) that it may have been referring not to the dataset but to the DD. My memory claims this message was issued by

Re: Help with Connect Direct Message

This can happen if the current generation is in DEFERRED status. Do a LISTCAT to find out. If it is, either delete the generation, or do an IDCAMS ALTER ROLLIN against it. On Wed, Feb 10, 2021, 12:36 PM D alta < 03719b4e1fc7-dmarc-requ...@listserv.ua.edu> wrote: > Also, if you have access

Re: Help with Connect Direct Message

Also,  if you  have access to PLEXB, look at the C:D log and see if there are SDBA005I messages associated with your process.If it says the destination file is in use by another process - there are multiple processes trying to create the same +1 GDG? On Wednesday, February 10, 2021,

Re: Help with Connect Direct Message

Sent: Wednesday, February 10, 2021 11:24 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Help with Connect Direct Message This message was sent from an external source outside of Western & Southern's network. Do not click links or open attachments unless you recognize the sender and know the cont

Help with Connect Direct Message

List I am getting an error in Connect Direct The Destination file is already open for output and in use by another C : D Process My file is being transferred with CD from PLEXA to PLEXB as a GDG to +1GDG on the receiving Plex I am struggling to figure out where to look. My

Re: Help please - SSIBJBID aka Job Identifier

Of Greg Price Sent: 10 February 2021 06:22 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help please - SSIBJBID aka Job Identifier EXTERNAL EMAIL On 2021-02-10 5:11 AM, Mario Bezzi wrote: > Hello, > > I am trying to get the Job Identifier for the AS I run in. > > As far

Re: Help please - SSIBJBID aka Job Identifier

: Help please - SSIBJBID aka Job Identifier EXTERNAL EMAIL On 2021-02-10 5:11 AM, Mario Bezzi wrote: > Hello, > > I am trying to get the Job Identifier for the AS I run in. > > As far as I understand it is available in the SSIBJBID field of the > > Subsystem Ident

Re: Help please - SSIBJBID aka Job Identifier

On 2021-02-10 5:11 AM, Mario Bezzi wrote: > Hello, > > I am trying to get the Job Identifier for the AS I run in. > > As far as I understand it is available in the SSIBJBID field of the > Subsystem Identification Block (SSIB). This field is defined as GUPI. > To get to the SSIB I follow the

Re: Help with non-existent catalog

You are right. Sorry I misread the original ask. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Seymour J Metz Sent: Tuesday, January 26, 2021 2:24 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help with non-existent catalog

Re: Help with non-existent catalog

26, 2021 11:24 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help with non-existent catalog That command is for a normal dataset, not for a catalog. Use EXPORT DISCONNECT to delete the catalog entry in the BCS. -- For IBM-MAIN

Re: Help with non-existent catalog

@LISTSERV.UA.EDU Subject: Re: Help with non-existent catalog IDCAMS DELETE dsn NOSCRATCH -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Charles Mills Sent: Tuesday, January 26, 2021 1:49 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Help

Re: Help with non-existent catalog

of Charles Mills [charl...@mcn.org] Sent: Tuesday, January 26, 2021 2:16 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help with non-existent catalog Thanks. DELETE dsn NOSCRATCH gives me IDC3014I CATALOG ERROR IDC3009I ** VSAM CATALOG RETURN CODE IS 90 - REASON CODE IS IGG0CLFK-18 IDC0551I ** ENTRY

Re: Help with non-existent catalog

. (There was no IEC331I with an sfi.) Help! Charles -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Chuck Kreiter Sent: Tuesday, January 26, 2021 10:55 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help with non-existent catalog IDCAMS DELETE dsn

Re: Help with non-existent catalog

May mean the volume containing the original catalog has gone away. so export disconnect the thing.and find something else to worry about. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to

Re: Help with non-existent catalog

-- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of Charles Mills [charl...@mcn.org] Sent: Tuesday, January 26, 2021 1:49 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Help with non

Re: Help with non-existent catalog

, January 26, 2021 12:55 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help with non-existent catalog ATTENTION: This e-mail came from an external source. Do not open attachments or click on links from unknown or unexpected emails. IDCAMS DELETE dsn NOSCRATCH -Original Message- From: IBM

Re: Help with non-existent catalog

LISTSERV.UA.EDU > Subject: Help with non-existent catalog > > I've got a catalog problem. I have no reason to believe it is the most > obscure problem in the world; it's just that I am a catalog ignoramus. > > I *think* the problem is that the catalog is cataloged but the underlyi

Re: Help with non-existent catalog

IDCAMS DELETE dsn NOSCRATCH -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Charles Mills Sent: Tuesday, January 26, 2021 1:49 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Help with non-existent catalog I've got a catalog problem. I have

Help with non-existent catalog

it ISPF tells me "Dataset not found." That's a problem, right? If I enter a U against it ISPF tells me Catalog/uncatalog request via SVC 26 failed, return code = 60, reason code = 4, module id = FM. Thanks for your help. I believe I would be fine if I could just delete it and start ove

Re: SAS/C++ help

Thanks. I read that doc. It doesn't coexists with VENDOR.C750.LIBCXX.A. I may create some alias data sets. On 21/01/2021 8:20 pm, Joe Monk wrote: according to here: https://support.sas.com/archive/installation/admindoc/installation/c_7.50F_MVS.pdf Its prefix.RW.LIBSTD.A and

Re: SAS/C++ help

according to here: https://support.sas.com/archive/installation/admindoc/installation/c_7.50F_MVS.pdf Its prefix.RW.LIBSTD.A and prefix.RW.LIBTOOLS.A for the rogue wave libs... look at page 58/61 Joe On Thu, Jan 21, 2021 at 4:04 AM David Crayford wrote: > I'm working on a project that

Re: SAS/C++ help

: Thursday, January 21, 2021 12:04 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SAS/C++ help I'm working on a project that uses SAS/C++ and I'm having problems getting the sasCC370 compiler in z/OS UNIX configured to include the Rogue Wave STL library. In the sascc.cfg file  I specified CXXLIBPREFIX

Re: SAS/C++ help

- From: IBM Mainframe Discussion List On Behalf Of Gadi Ben-Avi Sent: 21 January 2021 17:07 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: SAS/C++ help How about asking SAS. Start at support.sas.com or send a message to supp...@sas.com Gadi -Original Message- From: IBM Mainframe Discussion List

Re: SAS/C++ help

SAS/C went out of support in about 2004! Good luck getting support. Robin > -Original Message- > From: IBM Mainframe Discussion List On > Behalf Of Gadi Ben-Avi > Sent: 21 January 2021 17:07 > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: SAS/C++ help > > How a

Re: SAS/C++ help

How about asking SAS. Start at support.sas.com or send a message to supp...@sas.com Gadi -Original Message- From: IBM Mainframe Discussion List On Behalf Of David Crayford Sent: Thursday, January 21, 2021 12:04 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SAS/C++ help I'm working

SAS/C++ help

I'm working on a project that uses SAS/C++ and I'm having problems getting the sasCC370 compiler in z/OS UNIX configured to include the Rogue Wave STL library. In the sascc.cfg file  I specified CXXLIBPREFIX=VENDOR.C750.RW but then it failed because the LIBCXX data set was not found. I tried to

Re: Request for help with removing sequence numbers from PDS members

See attached 'EDITMAC.txt' on how to process all members of a PDS using REXX and edit macros.   - PDSMEM is ASM, with EQUREGS just being "R0 EQU 0" etc. Assemble and link-edit that. - CALSTRIP is REXX. Copy it to your SYSEXEC PDS library. - STRIP73  is a REXX edit macro. Copy it to your SYSEXEC

Re: Request for help with removing sequence numbers from PDS members

If any lines have blank sequence numbers, your editor may change the profile to nonum. So the easiest is NUM 73 80 to overwrite any existing characters, then UNNUM to remove the new sequence numbers. On Wed, Jan 13, 2021 at 2:07 AM Wayne Bickerdike wrote: > > UNNUM in the EDIT macro works better

Re: Request for help with removing sequence numbers from PDS members

UNNUM in the EDIT macro works better if the member has real sequence numbers. If it's just any text that happens to be NUM or CHAR, the picture works better :) On Wed, Jan 13, 2021 at 7:02 PM Wayne Bickerdike wrote: > ALLMEM source: > > /* REXX */ >

Re: Request for help with removing sequence numbers from PDS members

ALLMEM source: /* REXX */ /**/ /**/ /* Routine to run the edit macro ALL against all members of a*/ /* library.

Re: Request for help with removing sequence numbers from PDS members

I have a REXX called ALLMEM, it gets the member list and calls an edit macro. I usually run it from 3.4. I'll post it here when I get my system going. On Wed, Jan 13, 2021 at 5:00 AM Paul Gilmartin < 000433f07816-dmarc-requ...@listserv.ua.edu> wrote: > On Tue, 12 Jan 2021 13:46:07 -0400,

Re: Request for help with removing sequence numbers from PDS members

On Tue, 12 Jan 2021 13:46:07 -0400, Clark Morris wrote: >> >>And a general note: when using ISPF edit to remove sequence numbers from a >>(large) number of (large) members, you might need to cater for the fact that >>a >>PDS might need to be compressed at some stage in the middle of your

Re: Request for help with removing sequence numbers from PDS members

[Default] On 12 Jan 2021 08:42:24 -0800, in bit.listserv.ibm-main robert.ah.pr...@gmail.com (Robert Prins) wrote: >>snip > >And a general note: when using ISPF edit to remove sequence numbers from a >(large) number of (large) members, you might need to cater for the fact that a >PDS might need

Re: Request for help with removing sequence numbers from PDS members

From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of Paul Gilmartin [000433f07816-dmarc-requ...@listserv.ua.edu] Sent: Tuesday, January 12, 2021 11:51 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Request for help with removing sequence numbers from PDS members

Re: Request for help with removing sequence numbers from PDS members

On Tue, 12 Jan 2021 18:41:54 +, Robert Prins wrote: > >... the advantage of keeping things together, like the PL/I RFE I've >very recently entered, >. >Feel free to vote for it, although I already expect it to be

Re: Request for help with removing sequence numbers from PDS members

On Tue, 12 Jan 2021 16:20:17 +, Seymour J Metz wrote: >ISREDIT is only valid for an edit macro. You need on script to invoke EDIT and >a second script running as an IMACRO for the edit. If they are in SYSPROC then >you need to start the first comment with REXX. > Is the initial command

Re: Request for help with removing sequence numbers from PDS members

t; > > -- > Shmuel (Seymour J.) Metz > http://mason.gmu.edu/~smetz3 > > > From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf > of Sean Gleann [sean.gle...@gmail.com] > Sent: Tuesday, January 12, 2021 5:30 AM > To: IBM-MAIN@

Re: Request for help with removing sequence numbers from PDS members

On 2021-01-12 16:20, Seymour J Metz wrote: ISREDIT is only valid for an edit macro. You need on script to invoke EDIT and a second script running as an IMACRO for the edit. If they are in SYSPROC then you need to start the first comment with REXX. /* Outer script */ parse upper arg

Re: Request for help with removing sequence numbers from PDS members

Metz [sme...@gmu.edu] Sent: Tuesday, January 12, 2021 11:20 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Request for help with removing sequence numbers from PDS members ISREDIT is only valid for an edit macro. You need on script to invoke EDIT and a second script running as an IMACRO for the edit

Re: Request for help with removing sequence numbers from PDS members

Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of Sean Gleann [sean.gle...@gmail.com] Sent: Tuesday, January 12, 2021 5:30 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Request for help with removing sequence numbers from PDS members I've been told by Powers That Be that this line of d

Re: Request for help with removing sequence numbers from PDS members

On Tue, 12 Jan 2021 11:26:32 +, Sean Gleann wrote: > > 7 *-* "ISREDIT MACRO" > >L> "ISREDIT MACRO" > +++ RC(20) +++ > That belongs not here but in your initial macro. >21 *-* "ISPEXEC EDIT DATAID() MEMBER() MACRO()" > >L> "ISPEXEC EDIT DATAID() MEMBER()

Re: Request for help with removing sequence numbers from PDS members

The 'parse source . . me .' modification cracked the problem, Andy - many thanks! I see now from my very earliest version of the REXX, I had missed out the the space between the placeholders for the first two tokens That led me into a can of worms that eventually resulted in me removing the '. .

Re: Request for help with removing sequence numbers from PDS members

Actually, I think it does. The MACRO parameter should have the name of the calling exec - the other parms have values as I would expect. Can you add a trace ir right at the top, it should show what the parse source is returning; you might instead add a say me .. The parse line should say:

Re: Request for help with removing sequence numbers from PDS members

Hi Andy The ISPLOG output doesn't give anything useful, unfortunately. Time*** ISPF transaction log *** 07:08 Start of ISPF Log - - - - Session # 1 07:08 TSO - Command - - STRIPNOS 07:08 * Dialog Error *

Re: Request for help with removing sequence numbers from PDS members

Sean, If your shop has File-manager , the following JCL will give you the desired results //STEP0100 EXEC PGM=FILEMGR //SYSPRINT DD SYSOUT=* //PDS DD DISP=SHR,DSN=Your.PDS/PDSE.to.remove.seqnum //SYSINDD * $$FILEM FCH INPUT=PDS C P'=' ' ' 73 80 /* Thanks, Kolusu

Re: Request for help with removing sequence numbers from PDS members

So, it's the invocation of EDIT that's causing the error. If you add an ISPLOG DD (RECFM VBA, LRECL 125) do you get more info? Otherwise we're into adding some say statements in to see what , and are set to, and wrapping the whole thing in CONTROL ERRORS so we can see what we get back in

Re: Request for help with removing sequence numbers from PDS members

Hi Andy "is it just that you're seeing the RC20 from the ISREDIT" - in this particular version of the REXX it is, but as previously detailed I had problems with the syntax of the CONTROL ERRORS statement. "Does the REXX continue afterwards if you uncomment the code" - in a manner of speaking,

Re: Request for help with removing sequence numbers from PDS members

Twice recently I've tried to paste an answer to a question involving some REXX output and been caught by our DLP filters. Subscribing separately to avoid that! Anyway, is it just that you're seeing the RC20 from the ISREDIT? I would expect that on the first invocation, the CONTROL ERRORS

Re: Request for help with removing sequence numbers from PDS members

On 2021-01-11 8:06 PM, Sean Gleann wrote: Can anyone point me at some sort of solution that I might adapt, please? Perhaps there is something on the CBT tape that might help... I am sure the original problem has been resolved by now, but for completeness I will mention a couple of things

Re: Request for help with removing sequence numbers from PDS members

IST >END SAVE > /* > // > > Note the LIST commands are optional. > Lennie > > -Original Message- > From: IBM Mainframe Discussion List On Behalf > Of Lennie Dymoke-Bradshaw > Sent: 11 January 2021 19:48 > To: IBM-MAIN@LISTSERV.UA.EDU > Su

Re: Request for help with removing sequence numbers from PDS members

- From: IBM Mainframe Discussion List On Behalf Of Lennie Dymoke-Bradshaw Sent: 11 January 2021 19:48 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Request for help with removing sequence numbers from PDS members Here's how to do it using TSO EDIT. //EDIT EXEC PGM=IKJEFT01 //SYSTSPRT

Re: Request for help with removing sequence numbers from PDS members

To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Request for help with removing sequence numbers from PDS members How about TSO EDIT (yes TSO, not ISPF) in batch. Lennie -Original Message- From: IBM Mainframe Discussion List On Behalf Of R.S. Sent: 11 January 2021 10:21 To: IBM-MAIN

<    1   2   3   4   5   6   7   8   9   10   >