Re: Xposted from TCP/IP list SSL Problems, please help

: Thursday, October 27, 2016 11:40 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Xposted from TCP/IP list SSL Problems, please help WAG, Does TCP/IP have read access to the private key in the PKDS? CSFKEYS resource. Mark Jacobs > Ward, Mike S <mailto:mw...@ssfcu.org> > October 27, 2016

Re: SMF RECORD TYPE : HELP

SYSOUT=* //ISFIN DD * /D ALLOC,,devaddr,1 /* ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 8:23 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: SMF RECORD TYPE : HELP Yes, I

Re: SMF RECORD TYPE : HELP

help. This link shows the RMF libraries that are allocated (dynamically or hard coded in the TSO Logon Proc) to your TSO Session to use the RMF Panels http://www.ibm.com/support/knowledgecenter/SSLTBW_2.1.0/com.ibm.zos.v2r1.erbb200/exec.htm Unless the libraries are allocated, you cannot use the RMF

Re: SMF RECORD TYPE : HELP

a flashcopy volume? Or do you allow it to be used by other activities? 6) Is this first time this job has had an issue or is this a reoccurring event? 7) As others have stated, RMF Panels could help Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IB

Re: SMF RECORD TYPE : HELP

www.syncsort.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Campbell Jay Sent: Thursday, November 3, 2016 8:46 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: SMF RECORD TYPE : HELP SPOOL shouldn't matter. Must have had RMFGAT running

Re: SMF RECORD TYPE : HELP

03, 2016 8:40 AM To: IBM-MAIN@listserv.ua.edu Subject: Re: SMF RECORD TYPE : HELP I was able to access the panel however the job is no longer in the spool because it has been sent to $AVRS. On Thu, 3/11/16, Campbell Jay <james.l.campb...@irs.

Re: SMF RECORD TYPE : HELP

I was able to access the panel however the job is no longer in the spool because it has been sent to $AVRS. On Thu, 3/11/16, Campbell Jay <james.l.campb...@irs.gov> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Re

Re: SMF RECORD TYPE : HELP

Our setup is Jay Campbell MSSD – IZSSB – IOSSS -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@listserv.ua.edu] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 8:36 AM To: IBM-MAIN@listserv.ua.edu Subject: Re: SMF RECORD TYPE : HELP Thanks

Re: SMF RECORD TYPE : HELP

Thanks for the suggestion. I am not familiar on how to use. I sure would like to try. Is it interactive via ISPF? On Thu, 3/11/16, Campbell Jay <james.l.campb...@irs.gov> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.

Re: SMF RECORD TYPE : HELP

To: IBM-MAIN@listserv.ua.edu Subject: Re: SMF RECORD TYPE : HELP Yes, I tried that. However, when I issued the command it was too late (3 minutes after the job abend). This is why I thought by reading SMF records would have some info on the volume

Re: SMF RECORD TYPE : HELP

66d-dmarc-requ...@listserv.ua.edu> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 7:56 AM Have you tried the alloc command from the console or SDSF? D U,,ALLOC,devaddr,1 Thank You ;-D an -Original M

Re: SMF RECORD TYPE : HELP

Subject: SMF RECORD TYPE : HELP G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR

SMF RECORD TYPE : HELP

G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - PURGE ALLEXCP ALLDATA(*)

Re: Help with email

As yet another suggestion, if you have CICS Transaction Server Version 4.2 or later (in at least one region/LPAR) then CICS SupportPac CA1Y is available: http://www.ibm.com/support/docview.wss?uid=swg24033197 This SupportPac includes both sending (SMTP) and receiving (IMAP and POP3) functions

Re: [EXTERNAL] Re: Help with email

List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Paul Gilmartin Sent: Tuesday, November 01, 2016 11:59 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: [EXTERNAL] Re: Help with email On Tue, 1 Nov 2016 09:47:35 -0500, Elardus Engelbrecht wrote: >Hilary Hurwitz wrote: > >>But I hav

Re: Help with email

On Tue, 1 Nov 2016 09:47:35 -0500, Elardus Engelbrecht wrote: >Hilary Hurwitz wrote: > >>But I have a few problems with this. >>If the email fails the job ends with a 0, and until a rejection email >>arrives back to me, I have no idea of problems. > >>I have a feeling we have a hole in the

Re: Help with email

Hilary Hurwitz wrote: >But I have a few problems with this. >If the email fails the job ends with a 0, and until a rejection email arrives >back to me, I have no idea of problems. >I have a feeling we have a hole in the knowledge of our tcp people here. Is >this the way to work ? Surely the

Re: Help with email

nal Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of Hilary Hurwitz > Sent: Tuesday, November 01, 2016 5:41 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Help with email > > Until now our site's use of email from the mainframe has

Re: Help with email

15:07 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help with email Hilary, If you are just getting started with SMTP on the mainframe, you might want to consider the "newer" mail server called CSSMTP. It definitely has some additional functionality and it may also address som

Re: Help with email

l.com] Sent: Tuesday, November 01, 2016 8:46 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help with email This is normal behavior for the described process. The IEBGENER step ends successfully (RC=0) and the output is placed in spool. At some later time, SMTP retrieves the data from the spool a

Re: Help with email

On Tue, Nov 1, 2016 at 7:40 AM, Hilary Hurwitz wrote: > Until now our site's use of email from the mainframe has been very > limited, due to security concerns. > > However I am not to be allowed to use email in a limited way. > ​s/not/now/​ > > The JCL I was told to use

Re: Help with email

16 7:41 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Help with email Until now our site's use of email from the mainframe has been very limited, due to security concerns. However I am not to be allowed to use email in a limited way. The JCL I was told to use was //S16DBNA1 JOB (XO,005,0099,1,0),

Help with email

Until now our site's use of email from the mainframe has been very limited, due to security concerns. However I am not to be allowed to use email in a limited way. The JCL I was told to use was //S16DBNA1 JOB (XO,005,0099,1,0),NAT,NOTIFY=, // TIME=(001,39),CLASS=O, // REGION=5M /*JOBPARM

Re: Xposted from TCP/IP list SSL Problems, please help

Mark Jacobs wrote: >WAG, Does TCP/IP have read access to the private key in the PKDS? CSFKEYS >resource. Good catch! Thanks for helping out! I would also look at the RACF SMF records for any 'funny' things. Groete / Greetings Elardus Engelbrecht

Re: Xposted from TCP/IP list SSL Problems, please help

Ward, Mike S wrote: >To my dismay TN3270 will no longer support a SSL\TLS connection Apparently there is an APAR which enables you to fall back to SSL v3. Check with big blue before you upgrade away from z/OS v1.13. >I'm at a loss ICSF is up and running, and the crypto cards are supposed to

Re: Xposted from TCP/IP list SSL Problems, please help

WAG, Does TCP/IP have read access to the private key in the PKDS? CSFKEYS resource. Mark Jacobs Ward, Mike S <mailto:mw...@ssfcu.org> October 27, 2016 at 12:33 PM Hello list I have a small problem that I was hoping I could get some help with. System is z/OS V1.13 running on a Z13s W0

Xposted from TCP/IP list SSL Problems, please help

Hello list I have a small problem that I was hoping I could get some help with. System is z/OS V1.13 running on a Z13s W01 soon to be V2.2, but not yet and not soon enough. We are using system SSL/TLS not AT/TLS for FTP and TN3270. We have Crypto express 5 cards with a CEX5C coprocessor. I

Re: Help with orphan in FIFO control block chain

Where do you set R1? On Tue, 25 Oct 2016 11:25:02 -0500 Donald Likens <dlik...@infosecinc.com> wrote: :>I posted before on this issue and you all were a great help because I was using CS and PLO to serialize. However I changed the code and the issue still exists. The issue looks like,

Help with orphan in FIFO control block chain

I posted before on this issue and you all were a great help because I was using CS and PLO to serialize. However I changed the code and the issue still exists. The issue looks like, I create a control block but it does not get added to the chain… I think the term is orphan. The control block

Re: Help with broken CB chain

the use of both PERFORM LOCKED OPERATION and conditional-swapping instructions (CS and CDS). Thanks for your help. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu

Re: Help with broken CB chain

1:52 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help with broken CB chain You *can* *not* safely intermix the use of CDSG and PLO without using special protocols. This is clearly documented in the POPs. You *can* safely intermix CDSG and tra

Re: Help with broken CB chain

You *can* *not* safely intermix the use of CDSG and PLO without using special protocols. This is clearly documented in the POPs. You *can* safely intermix CDSG and transactional execution. Regards, Greg -- For IBM-MAIN

Re: Help with broken CB chain

Missed a line of code at the end... Here is the updated code: FIRST DS D LASTDS D DOX378 DS0H LGR6,LAST *C IF FIRST AND LAST EQ 0

Help with broken CB chain

I have a control block chain in CSA above the BAR that is updated from multiple address spaces with a first and last pointer. The last entry in the chain has a next = 0. If there are no entries in the chain the first and last pointer = 0. I seem to be adding two entries to the beginning of the

Re: Help with MQ and MA10: MQ Series for MVS/ESA ISPF Utilities

/support/docview.wss?uid=swg27007197 Hope that helps, Dave -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jesse 1 Robinson Sent: Friday, September 23, 2016 1:10 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help with MQ and MA10

Re: Help with MQ and MA10: MQ Series for MVS/ESA ISPF Utilities

On 9/23/2016 1:39 PM, Hansen, Dave L - Eagan, MN wrote: Thank you Tom. I am able to see DLQM being passed to my EXEC. Have a great weekend, Dave Glad to help Dave, and thank you for using Dynamic ISPF. Like Skip, I haven't heard of this product. Please Email me your invocation

Re: Help with MQ and MA10: MQ Series for MVS/ESA ISPF Utilities

UA.EDU] > On Behalf Of Jesse 1 Robinson > Sent: Friday, September 23, 2016 1:10 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Help with MQ and MA10: MQ Series for MVS/ESA ISPF Utilities > > What is this MQ app whereof you speak? Is MA10 a separate product? I have > a passel o

Re: Help with MQ and MA10: MQ Series for MVS/ESA ISPF Utilities

Mobile 626-302-7535 Office robin...@sce.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Tom Conley Sent: Friday, September 23, 2016 9:47 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: (External):Re: Help with MQ and MA10: MQ Series for MVS

Re: Help with MQ and MA10: MQ Series for MVS/ESA ISPF Utilities

Subject: Re: Help with MQ and MA10: MQ Series for MVS/ESA ISPF Utilities On 9/22/2016 3:38 PM, Hansen, Dave L - Eagan, MN wrote: > Dear Group, > >I am trying to get the ISPF based tool MQDLQ to work with MQ V8. The > program MQDLQ0 is part of MA10 and wants a Queue Manager name as input

Re: Help with MQ and MA10: MQ Series for MVS/ESA ISPF Utilities

On 9/22/2016 3:38 PM, Hansen, Dave L - Eagan, MN wrote: Dear Group, I am trying to get the ISPF based tool MQDLQ to work with MQ V8. The program MQDLQ0 is part of MA10 and wants a Queue Manager name as input. I have tried ISPF PARM and ISPF VPUT. Does anyone have MQDLQ working from a

Help with MQ and MA10: MQ Series for MVS/ESA ISPF Utilities

Dear Group, I am trying to get the ISPF based tool MQDLQ to work with MQ V8. The program MQDLQ0 is part of MA10 and wants a Queue Manager name as input. I have tried ISPF PARM and ISPF VPUT. Does anyone have MQDLQ working from a panel that supplies the Queue Manager Name? @MQ EXEC

Re: CBT FILE672 help

to see if that task should come up or not monitor. Lizette -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of R.S. Sent: Friday, September 16, 2016 3:14 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: CBT FILE672 help I'm trying to understand

Re: CBT FILE672 help

should come up or not monitor. Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of R.S. > Sent: Friday, September 16, 2016 3:14 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: CBT FILE672 help > > I'm try

CBT FILE672 help

I'm trying to understand format of SYSIN control cards. I read the $INSTALL and #DOC, but it's still unclear to me. Q1. What is the meaning of column 1 - level? Example 1 CF CICSAAA1,CEMT P SHUT I 4 CF CICSBBB2,CEMT P SHUT I 2 C 003 T P TSO 1 C 005 T

Re: AST tracking help - OA47207

10, 2016 12:29 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: AST tracking help - OA47207 Hi, I am unable to open the AST tracking link to know when there will be a GA PTF for the APAR OA47207. Could someone please help ? Jake

AST tracking help - OA47207

Hi, I am unable to open the AST tracking link to know when there will be a GA PTF for the APAR OA47207. Could someone please help ? Jake -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists

Re: Need Help Idenifying Control Blocks

@LISTSERV.UA.EDU] On Behalf Of esst...@juno.com Sent: Monday, July 18, 2016 3:53 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Need Help Idenifying Control Blocks these structures look about the right size, I have these structures in both DB2 and MQ dumps but no macro ??? 2 -- Original Message

Re: Need Help Idenifying Control Blocks

these structures look about the right size, I have these structures in both DB2 and MQ dumps but no macro ??? 2 -- Original Message -- From: Ron hesketh <ron.hesk...@bankwest.com.au> To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Need Help Idenifying Control Blocks Date: Mon,

Re: Need Help Idenifying Control Blocks

Db2 may use these control blocks, however I have seen them In MQdumps as well -- Original Message -- From: Binyamin Dissen <bdis...@dissensoftware.com> To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Need Help Idenifying Control Blocks Date: Sun, 17 Jul 2016 15:34:18 +0300 Sorr

Re: Need Help Idenifying Control Blocks

Hi , Have a look in member DSNWCBDS in your DB2 SDSNSAMP dataset, the definition is in there. Its not a macro, but a description of the fields eg CCB : COMPOSITE CAPABILITY BLOCK OFFSET OFFSET DECIMAL HEX TYPELENGTH NAME (DIM)

Re: Need Help Idenifying Control Blocks

CICS was merely an example of a non-core MVS component. Your subject line indicated that you needed help identifying what these control blocks were. I was just trying to help! Sent from my iPhone > On Jul 17, 2016, at 08:08, esst...@juno.com <esst...@juno.com&

Re: Need Help Idenifying Control Blocks

N@LISTSERV.UA.EDU :>Subject: Re: Need Help Idenifying Control Blocks :>Date: Sat, 16 Jul 2016 21:36:35 +0300 :> :>IBM does not provide DSECTs for internal DB2 control blocks. :> :>On Sat, 16 Jul 2016 13:30:21 GMT "esst...@juno.com" <esst...@juno.com> wrote: :> :&g

Re: Need Help Idenifying Control Blocks

These are not DB2 control blocks -- Original Message -- From: Binyamin Dissen <bdis...@dissensoftware.com> To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Need Help Idenifying Control Blocks Date: Sat, 16 Jul 2016 21:36:35 +0300 IBM does not provide DSECTs for internal DB2 c

Re: Need Help Idenifying Control Blocks

auxiliary storage management control element The ACE was the only control found -- Original Message -- From: Lizette Koehler <stars...@mindspring.com> To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Need Help Idenifying Control Blocks Date: Sat, 16 Jul 2016 10:14:22 -0700 Did y

Re: Need Help Idenifying Control Blocks

THey are not CICS, Nor MQ, Nor WebSphere, they are z/OS structues. conr blocks.-- Original Message -- From: J R <jayare...@hotmail.com> To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Need Help Idenifying Control Blocks Date: Sat, 16 Jul 2016 15:01:48 + What is the rel

Re: Need Help Idenifying Control Blocks

IBM does not provide DSECTs for internal DB2 control blocks. On Sat, 16 Jul 2016 13:30:21 GMT "esst...@juno.com" <esst...@juno.com> wrote: :>I need some help in Identifying the Mapping Macros for the following z/OS control blocks: :>

Re: Need Help Idenifying Control Blocks

Sorry, I meant at z/OS V2.2.0 not V2.1.0 Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of Lizette Koehler > Sent: Saturday, July 16, 2016 10:14 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Ne

Re: Need Help Idenifying Control Blocks

m: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of esst...@juno.com > Sent: Saturday, July 16, 2016 6:30 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Need Help Idenifying Control Blocks > > Hi, > . > > I need some help in Identifying the M

Re: Need Help Idenifying Control Blocks

com <esst...@juno.com> wrote: > > Hi, > . > > I need some help in Identifying the Mapping Macros for the following z/OS > control blocks: > EB - Execution Block > ACE - Auxiliary Storage Management Control Element > (I

Need Help Idenifying Control Blocks

Hi, . I need some help in Identifying the Mapping Macros for the following z/OS control blocks: EB - Execution Block ACE - Auxiliary Storage Management Control Element (I believe the mapping Macro is ILRACE) CCB - Composite Capability Block Since

Re: IPCS error help

>Do I need to >make sure OA43495 (or its 2.1 PTF) is applied on a 2.1 system, and >only then recopy MIGLIB? Or is there a way I can apply the maintenance >directly to the 2.1 MIGLIB on the 2.2 system? Surely the necessary thing is to install the APAR (into the 2.1 miglib) and then use that

Re: IPCS error help

> > We saw this internally recently-- > > I believe this specific 878-10 is due to the installation of a + > +APAR for OA43495 which I think is for new hardware toleration. > Either some versions of the ++APAR don't have part IOSVFMTC included > which has updates to IOS formatters that are called

Re: IPCS error help

[Yes, I realize I'm replying to an old posting] On 11 February 2015 at 09:28, Nick Jones wrote: > We saw this internally recently-- > I believe this specific 878-10 is due to the installation of a ++APAR for > OA43495 which I think is for new hardware toleration. Either

Re: Help identifying source of SMF 80 record

Rub it in! Charles -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of David Crayford Sent: Wednesday, July 06, 2016 6:06 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help identifying source of SMF 80 record Should be the first port

Re: Help identifying source of SMF 80 record

[mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Cheryl Watson Sent: Tuesday, July 05, 2016 11:45 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help identifying source of SMF 80 record Hi Charles, I've got an EKC product called "Firecall" listed in my SMF Reference Summary at www.watson

Re: Help identifying source of SMF 80 record

Well how dumb can I get. I never thought to look at your list, @Cheryl. Charles -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Cheryl Watson Sent: Tuesday, July 05, 2016 11:45 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help

Re: Help identifying source of SMF 80 record

sday, July 5, 2016 11:43 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Help identifying source of SMF 80 record X-posted IBM-MAIN and RACF-L. I am looking at an SMF 80 record from a customer that I am having trouble making sense of. The customer is definitely a RACF user, not a TSS user. The customer

Re: Help identifying source of SMF 80 record

You could set up an SMF exit to check for the suspicious record and check who is writing it. Kees. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Charles Mills Sent: 05 July, 2016 17:43 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Help

Re: Help identifying source of SMF 80 record

curity product or a "RACF add-on." Charles -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Martin Packer Sent: Tuesday, July 05, 2016 11:55 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help identifying source of SMF 80 record

Re: Help identifying source of SMF 80 record

3573?mt=2 From: Charles Mills <charl...@mcn.org> To: IBM-MAIN@LISTSERV.UA.EDU Date: 05/07/2016 18:10 Subject: Re: Help identifying source of SMF 80 record Sent by:IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> Thanks, @Tony and @Hayim. Sounds lik

Re: Help identifying source of SMF 80 record

UA.EDU] On Behalf Of Tony Harminc Sent: Tuesday, July 05, 2016 9:54 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help identifying source of SMF 80 record On 5 July 2016 at 11:43, Charles Mills <charl...@mcn.org> wrote: > I am looking at an SMF 80 record from a customer that

Re: Help identifying source of SMF 80 record

On 5 July 2016 at 11:43, Charles Mills wrote: > I am looking at an SMF 80 record from a customer that I am having trouble > making sense of. The customer is definitely a RACF user, not a TSS user. The > customer I believe is on z/OS V2R1. > > It is a valid SMF 80 record. The

Help identifying source of SMF 80 record

X-posted IBM-MAIN and RACF-L. I am looking at an SMF 80 record from a customer that I am having trouble making sense of. The customer is definitely a RACF user, not a TSS user. The customer I believe is on z/OS V2R1. It is a valid SMF 80 record. The event.qualifier is 2.0. There are three

Re: TCPIP Help

To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TCPIP Help Rob, TSO, huh, FTP is working no problemo I will look and see what's funky .. Scott On Friday, June 3, 2016, Rob Schramm <rob.schr...@gmail.com> wrote: > Scott, > > > > Looks like the consensus is.. most likely no

Re: TCPIP Help

Rob, TSO, huh, FTP is working no problemo I will look and see what's funky .. Scott On Friday, June 3, 2016, Rob Schramm wrote: > Scott, > > > > Looks like the consensus is.. most likely not...more likely a TSO > environment issue. > > > > VBG, > > Rob > On Thu,

Re: TCPIP Help

Scott, Looks like the consensus is.. most likely not...more likely a TSO environment issue. VBG, Rob On Thu, Jun 2, 2016, 6:31 AM Elardus Engelbrecht < elardus.engelbre...@sita.co.za> wrote: > Mike Schwab wrote: > > >You can run $INDFILE with the bottom half on ISPF 6 (Command input). > >

Re: TCPIP Help

Mike Schwab wrote: >You can run $INDFILE with the bottom half on ISPF 6 (Command input). O yes, it was a long time ago I used that option 6... (must practise that again when I'm idle...;-D ) Or if it is one dataset, just a simple XMIT (node.id) DA(/) against a dataset in TSO/ISPF option =3.4

Re: TCPIP Help

You can run $INDFILE with the bottom half on ISPF 6 (Command input). On Wed, Jun 1, 2016 at 9:42 AM, John McKown <john.archie.mck...@gmail.com> wrote: > On Wed, Jun 1, 2016 at 9:21 AM, Scott Ford <idfzos...@gmail.com> wrote: > >> All: >> >> I need some help g

Re: TCPIP Help

@LISTSERV.UA.EDU Subject: (External):Re: TCPIP Help It can be the case of old dogs not learning new tricks, I still use rz and sz, I always have to install lrzsz first, that's one of my footprints that I've been on a system :-) Len Rugen Metrics and Automation – umdoitmetr...@missouri.edu -Original

Re: TCPIP Help

Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Mike Shorkend Sent: Wednesday, June 01, 2016 10:12 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TCPIP Help Mainly out of curiosity, why use IND$FILE and not FTP? I am assuming that TCPIP is up and running and that you are not accessing

Re: TCPIP Help

Kown > Sent: Wednesday, June 01, 2016 9:43 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: TCPIP Help > > On Wed, Jun 1, 2016 at 9:21 AM, Scott Ford <idfzos...@gmail.com> wrote: > > > All: > > > > I need some help guys/gals. I have installed z/OS 2.2 und

Re: TCPIP Help

I don't remember my VTAM buffer pools, but one that caught us in a couple migrations was IOBUF. ===> d net,bufruse (?) Tells the tale. What we're looking for is times expanded. VTAM reconfigures ifself to accommodate but freezes activity in the process. In a message dated 6/1/2016

Re: TCPIP Help

: Wednesday, June 01, 2016 9:43 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TCPIP Help On Wed, Jun 1, 2016 at 9:21 AM, Scott Ford <idfzos...@gmail.com> wrote: > All: > > I need some help guys/gals. I have installed z/OS 2.2 under z/PDT and > have a wierd issue. I am trying to s

Re: TCPIP Help

On Wed, Jun 1, 2016 at 9:21 AM, Scott Ford <idfzos...@gmail.com> wrote: > All: > > I need some help guys/gals. I have installed z/OS 2.2 under z/PDT and have > a wierd issue. I am trying to send a file via IND$FILE, I see the xref > start and it hangs forever forcing me to

Re: TCPIP Help

age- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of Scott Ford > Sent: Wednesday, June 01, 2016 7:21 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: TCPIP Help > > All: > > I need some help guys/gals. I have installed z/OS 2.2 under z/PDT

Re: TCPIP Help

Try enlarging your TSO region. IND$FILE (AFAIK) does not use TCP/IP for communication. It seems to be a screen scraper. HTH, I need some help guys/gals. I have installed z/OS 2.2 under z/PDT and have a wierd issue. I am trying to send a file via IND$FILE, I see the xref start and it hangs

Re: TCPIP Help

Can I ask you another question did you get z/OS 2.2 from zpdt as I am still waiting Thanks Sent from my iPhone > On Jun 1, 2016, at 10:21 AM, Scott Ford <idfzos...@gmail.com> wrote: > > All: > > I need some help guys/gals. I have installed z/OS 2.2 under z/PDT and ha

TCPIP Help

All: I need some help guys/gals. I have installed z/OS 2.2 under z/PDT and have a wierd issue. I am trying to send a file via IND$FILE, I see the xref start and it hangs forever forcing me to cancel the TSO userid. Could this be a IP routing issue ? I need some help on where to start looking

Re: help

Train the users. Herd the cats send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN There's three fairly common pieces to IBM-Main. The listserver(fairly vanilla Lsoft), the list and the distribution server. In a message dated 4/10/2016 1:55:40 P.M. Central

Re: help

On Sun, Apr 10, 2016 at 8:22 AM, Gerhard Postpischil <gerha...@charter.net> wrote: > HELP IBM-MAIN > > ​How? ​ -- How many surrealists does it take to screw in a lightbulb? One to hold the giraffe and one to fill the bathtub with brightly colored power tools. Maranatha!

help

HELP IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Help with WebSphere MQ sample programs.

I am sure you will get good answers on the MQSERIES list. https://listserv.meduniwien.ac.at/cgi-bin/wa?A0=mqseries Cheers, Jantje. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to

Help with WebSphere MQ sample programs.

Dear favored listeners, We recently went from MQ V7 to MQ V8. I have been working with IBM. I was guided away from an old PUBSUB example because I was told a lot has changed and it would be uphill all the way. V8 has a new "CICS Asynchronous Consumption and Publish/Subscribe sample". I

Re: PLEASE HELP TLS 1.2

Of Donald J. > Sent: Thursday, March 24, 2016 9:05 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: PLEASE HELP TLS 1.2 > > ENCRYPTION=ALL Allows the use of TLS v1.1 and v1.2 in > addition to the protocols allowed by STRONG (TLS v1.0). > > ENCRYPT

Re: PLEASE HELP TLS 1.2

Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Donald J. Sent: Thursday, March 24, 2016 9:05 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: PLEASE HELP TLS 1.2 ENCRYPTION=ALL Allows the use of TLS v1.1 and v1.2 in addition

Re: PLEASE HELP TLS 1.2

se that we need to specifiy TLS 1.2. We > appreciate any help that you can give us. > Thank you. > > > > > > Email correspondence to and from this address may be subject to the North > Carolina Public Records Law and may be disclosed

Re: PLEASE HELP TLS 1.2

group that can tell you how your processes are being seen and rejected Lizette -Original Message- >From: Brian France <b...@psu.edu> >Sent: Mar 24, 2016 8:38 AM >To: IBM-MAIN@LISTSERV.UA.EDU >Subject: Re: PLEASE HELP TLS 1.2 > >Check your list of ciphers. There are

Re: PLEASE HELP TLS 1.2

with the correct SIT within CICS. We are missing something but cannot figure this out. Anyone else experiencing this? Are there parameters somewhere else that we need to specifiy TLS 1.2. We appreciate any help that you can give us. Thank you. Email correspondence

PLEASE HELP TLS 1.2

this? Are there parameters somewhere else that we need to specifiy TLS 1.2. We appreciate any help that you can give us. Thank you. Email correspondence to and from this address may be subject to the North Carolina Public Records Law and may be disclosed to third

Support Element: problem with restore CD. Help?

I have a Multiprise 3000 - 7060 P30. I would find it more convenient to have more space for emulated DASD. I'm therefore doing what was apparently quite a common (although unsupported) change; replacing the 9Gb OS/2 SSA drives with 18Gb drives. This will allow a much larger G: drive for emulated

<    4   5   6   7   8   9   10   11   12   13   >