Does anyone have a Bering 3.1 initrd.lrp that includes the modules for
the buslogic scsi adapter?
I'm trying to get the new Bering to run under ESX and am stuck since I
can't include the module now.
Chris
-
ather than a dedicated box. You can get an old pentium with a
CDROM and an ethernet card at Goodwill for under $40 and borrow
keyboard and monitor from your main machine for configuration. Whether
you go that cheap or buy some minimal ha
al
comment.
Chris
-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse012070mrt
Include me in awe.
However, that's a great start to accomplish what I'm after. Cut n'
Paste is great when you don't need to understand exactly what's going
on, just get the proper results.
As always, thanks Charles.
Chris
On Wed, 2006-03-08 at 11:15, Brent P. Gardner
ow in some high latency.
Can anyone point me in the right direction?
Thanks,
Chris
---
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and
Eric Spakman wrote:
Hello Chris,
You are using a viarhine module for Intel Pro100 nics? I think you need
the "eepro100" module for that.
I have both a PCI card with two LAN interfaces, and the built-in
interfaces on the motherboard, for a total of four interfaces.
The eepro100 mo
o, or can this work?
--
Chris Mason
NetConcepts
(264) 497-5670 Fax: (264) 497-8463
Int: (305) 704-7249 Fax: (815)301-9759 UK 44.207.183.0271
Cell: 264-235-5670
Yahoo IM: [EMAIL PROTECTED]
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be
ement IP Alias to serve multiple WAN IP
for intranet.
http://www.regalhotel.com/edm/mis/leaf/leaf.htm#zyxel
Any Hints?
Beside, from my URL, what is the usage for
IP Address between Custerom & Network - Network No: 210.245.201.224
Many thanks in advance
initrd , then reboot.
Hope this help and thanks Jon again. ^_^
Regards,
Chris Lee
---
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today
directory
mv: unable to rename `/var/log/shorewall.log.new': No such file or directory
chgrp: /var/log/shorewall.log.0: Operation not permitted
Rotated `/var/log/shorewall.log' at Thu Aug 26 12:13:35 UTC 2004.
Does MSDOS partition does not support file permission?
Regards,
20:49:10 HKT 2004 <- Wrong
Anyone face the same problem?
Regards,
Chris Lee
---
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Reta
tition (hda2) and Logical DOS Drive
(hda5) on the same harddisk (hda). So I should declare the statement as
follow:
qt mount -t msdos /dev/hda5 /var/log
Now I can got 512MB for /var/log. I think it is large enough to store the
shorewall.log.
Regards,
Chr
Dear David,
> If I run that script manually it works fine, but it doesn't seem to be
> running automatically.
try issue ps command, see if cron is running.
32220 root284 S /usr/sbin/cron
hope this help.
Regards
Dear Ronny,
Thanks. It working now!
Any hints for invalid log date?
Regards,
Chris Lee
---
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50
ACK=0 WINDOW=5840 SYN URGP=0
10.0.18.254 is the leaf server
10.0.18.1 is the VNC Server I want to connect
I use PuTTY port forwarding and
PuTTY Port fordward --> 203.198.x.x -> leaf -> 10.0.18.254 -> 10.0.18.1
Any Hints?
Beside, why the log date is Jan 1 08:00:00??
Regard
wheel -m 640 -u root -c $LOGDEPTH $LOGFILE >/dev/null
/etc/init.d/ulogd reload
fi
Hope this help.
Regards,
Chris Lee
---
SF.Net email is sponsored by Shop4tech.com-Lowest price on Bl
root4 Aug 18 12:36 tmp -> /tmp
Which version are you using? Maybe I try again by using 2.2rc1.
Regards,
Chris Lee
> -Original Message-
> From: Frank Dauer [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, August 18, 2004 3:21 PM
> To: [EMAIL PROTECTED]
> Subjec
HD now :^)
But wait.. when I issue "df" command.
It don't show the /var/log info.
Did you get the same result.
Regards,
Chris Lee
---
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R
sync both the software and hardware clock with ntpdate now.
> Here is Hongkong, which is GMT+8 , If I set TZ=UTC+8:
>
> # date
> Wed Jul 21 08:07:38 UTC 2004
> # hwclock
> Wed Jul 21 16:07:41 2004 0.00 seconds
Hope this info help other people face the same problem.
change it.
Beside, if I follow your suggestion, where can I put the sym link after
mount the harddisk at bootup?
Regards,
Chris Lee
---
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk
eth1
address 203.198.77.7_ ??
netmask 255.255.255.240
gateway 203.198.77.7_ ??
Any Hints?
Regards,
Chris Lee
---
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100p
528000 9440518560 2% /var/log
/dev/hda1 528000 9440518560 2% /var/log
I think the cron.log was written to /var/log at tmpfs first, then erased?
after mount the hard disk.
Question: How can I remove /var/log at tmpfs?
Dear Livio,
Thanks for your suggestion, I almost forgot ssh port fordwaring feature. :^)
Working great now.
Just for your info: weblet default use port 80
Regards,
Chris Lee
>
> I wouldn't go this way.
>
> Just get ssh up and running on the WAN interface and redirect
>
hi,
Is it possible to connect weblet via internet and password protected?
Regards,
Chris Lee
---
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50
leaf to peform normat NAT router for range of internet ip
address
Then, I want to setup SNMP to collect networking perform per ip
Finally, setup QOS for each ip.
It is possible?
Regards,
Chris Lee
---
SF.Net email is sponsored by Shop4tech.com-Lowest
CISCO marked down:
WAN IP: 172.23.76.154
LAN: 203.198.77.78 / 255.255.255.240
1. How do I define WAN setting? 172.23.76.154/255.255.255.255? how about the
default gateway?
2. How do I define LAN setting for an range of IP?
Many thanks in advance.
Regards,
Chris Lee
> -Original Message
Hi,
My company using CISCO 1603 Router
http://www.cisco.com/en/US/products/hw/routers/ps214/ps218/
provided by ISP for internet access.
Question: Is it possible use leaf to replace all the function for that
router?
Regards,
Chris Lee
> Don't forget to include
> it in the list of packages to load so that it installs
> automatically on
> the next reboot.
Is it possible to edit leaf.cfg and syslinux.cfg after login leaf as root?
If yes, where are the files locate?
R
Hi,
I am using Bering-uClibc_2.2-beta5 HDD version.
Is it possible to download and install additional packages w/o go back to
DOS?
Regards,
Chris Lee
---
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com
Hi,
How to upgrade Bering-uClibc 2.2-rc1 from 2.2 beta5?
PS: I have using HD version.
Regards,
Chris Lee
---
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few
Dear M Lu,
I think no problem for me to setup multi .conf for multi tunnel.
But how to start up multi openvpn process at startup?
Pls kindly advise.
Regards,
Chris Lee
---
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java
Rev 1
Many thanks in advance.
Regards,
Chris Lee
---
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&a
0 seconds
Why the date command show the incorrect time?
Pls kindly advise.
Regards,
Chris Lee
---
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop
204840 2008 2% /var/log
Many thanks in advance.
Regards,
Chris Lee
---
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http
Hi,
Can anyone kindly to send an old version of OpenVPNZ package, as the one on
the web seems broken.
Many Thanks in advance.
Regards,
Chris Lee
---
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Brief
not found error.
Regards,
Chris Lee
---
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
un
found
/etc/openvpn/openvpn.conf file
If I issue openvpn command, system return:
openvpn: not found
Any Hints?
Regards,
Chris Lee
---
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Train
dev eth1
up ip route add 10.1.60.0/23 via 10.1.10.1 dev eth1
Doc Ref:[EMAIL PROTECTED]://snafu.freedom.org/linux2.2/docs/ip-cref/ip-cref.html
Regards,
Chris Lee
> 3. Routing Table - Gateway
> How to set gateway beside default gateway?
>
> Here is the routing table for my RedHat box:
Thanks for answering Question 2, here come the new question:
Does Bering provide traceroute like function?
Regards,
Chris Lee
---
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, L
eth1
10.1.60.0 10.1.10.2 255.255.254.0 UG0 00 eth1
10.1.30.0 10.1.10.1 255.255.254.0 UG0 00 eth1
Regards,
Chris Lee
---
This SF.Net email sponsored by Black Hat Briefings & Trai
Dear Luiz Farias,
Thanks for your modules files: ^_^
However, everytime I reboot the computer, the files will missing from HDD
and the /etc/modules undo the changes.
Beside, how to backup modules.lrp?? Do I need to delete if after backup?
Regards,
Chris Lee
> You will need to add (in
III card ? Look for another module which is
similar...
Yes, but cannot found any similar module... Any Hints?
Or should I upgrade to beta version or degrade to 2.1.11 version?
Regards,
Chris Lee
---
This SF.Net email sponsored by Black Hat
tate
insmod: unresolved symbol pci_drv_unregister
insmod: unresolved symbol pci_drv_register
#uname -a
Linux firewall 2.4.24 #3 Sun Feb 22 19:25.40 CET 2004 i586 unknown
Any Hints?
Regards,
Chris Lee
---
This SF.Net email sponsored by Black
dev tun1
I'm stretching my knowledge of routing here, so please set me straight.
Thanks for any help, and to those who replied previously.
Chris
--
Chris Carbaugh
Network Administrator
[EMAIL PROTECTED]
Leer Electric Inc.
www.LeerElectric.co
swer is to change the IP addresses on our LAN, but
what happens when the next remote client is in the same situation?
If the only resort is to change IP address space on our LAN, what is
recommended to avoid this 'clash' in the future.
Any thoughts appreciated,
Chris
--
Chris Carbaug
any clues as to what I might be doing wrong?
Chris
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
leaf-user mailing list: [
I believe the line should read:
DNAT net loc:192.168.1.200 tcp 1" added
(take out :10000)
chris.
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Tom Harr
> Jakobsen
> Sent: Wednesday, September 03, 2003 5:16 AM
> To: [EMA
?
Chris.
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
leaf-user mailing list: [EMAIL PROTECTED]
https
st comfortable with Dachstein. I've been attacking this
problem for at least a month.
Does anyone have any idea how to properly get this working?
-chris.
---
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Dat
5.255.255.255
result: still filling logs.
I understand that the stuff in my logs has to do with renewing my IP address to my
ISP. My ISP is Comcast cable.
Chris.
---
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Dat
coming from ranges (esp. RFC1918 addresses) which they
don't provide.
It took a little work moving files around to get dhclient.lrp working on
wisp-dist but it was otherwise uneventful.
Chris
---
This SF.Net email sponsored by: Free
TCP/IP is working,
I know the cable is good, and tried using a static ip on the machine
connected to Bering. Can't get bering to communicate with the other machine,
or vice versa. Can anyone tell me a next step?
TIA
Chris
---
This SF.Net email
ff:ff
inet 192.168.1.254/24 brd 192.168.1.255 scope global eth1
The cards have worked in other machines. I just can't seem to figure out the
troubleshooting steps for this.
Thanks in advance.
Chris
---
This SF.Net email sponsored by: Fre
I've tried 2 different sets of ISA 3C509 cards, get the same problems. I'm
not sure the cards are setup right. My ioports shows this for the cards:
0300-030f : 3c509
My interrupts shows:
CPU0
0: 128443 XT-PIC timer
1:881 XT-PIC keyboard
2:
[EMAIL PROTECTED]
> Sent: Wednesday, June 25, 2003 12:18 PM
> To: Somerlot, Chris; [EMAIL PROTECTED]
> Subject: Re: [leaf-user] Re: Trouble getting started
>
>
> I don't remember what dist you're running, but I assume it's
> a recent one
> with Shorewall?
>
ytes target prot opt in out source
destination
0 0 dynamicall -- * * 0.0.0.0/0
0.0.0.0/0
/snip
Thanks
Chris
---
This SF.Net email is sponsored by: INetU
Attention Web Developers & Cons
ome on but
don't blink. How do I know the connection is good, router setup correctly,
etc before I connect my cable modem to the router? The only thing I changed
on the router was to uncomment the 3C509 line in the module conf file,
backup and reboot.
Thanks
Chris
Below is the messages log:
1
ne2k-pci4684 3
83905820 0 [ne2k-pci]
Any help would be greatly appreciated.
Chris Hall
---
This SF.NET email is sponsored by: eBay
Great deals on office technology -- on eBay now! Click here:
http://adfarm.med
r.
The second email server doesn't need to run Exchange so please make
reccommendations on that as well.
If you need any more info to help just ask.
Thanks,
Chris
---
This SF.net email is sponsored by: Etnus, makers of TotalView, The be
a new
MTA. Postfix?
Many Thanks,
Chris
Perth, Western Australia
---
This SF.net email is sponsored by:
The Definitive IT and Networking Event. Be There!
NetWorld+Interop Las Vegas 2003 -- Register today!
http://ads.sourceforge.n
wall until everyone goes home for the night so
I'll have to report back on that later.
Thanks for your help!
Chris
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://t
Just got back to work today after a long weekend and ready to try tackling
this prob again...
First off, was it okay for me to remove the $ from:
INTERN_SERVERS="tcp_$192.168.1.2_smtp_10.10.10.200_smtp" or should I put it
back in?
MX records are the DNS entries that tell remote systems how to
these messages even important? Or can they safely be ignored?
Also, after the image laods, when I log into the box, an "ip link" shows
only the 'lo" interface .. no eth0 or eth1 that I can find.
If anyone can point me in the right direction, I'd sur
bootable image, and am wondering if the
group has any recommendations for upgrading or moving to a new image during
this transition?
Thanks All!
Chris Hackett
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://t
EXTERN_TCP_PORTS="0/0_25"
to allow anyone on the internet to send you e-mail, and you'll probably
have a lot better luck.
Did it and still not receiving. Also tried Mike's suggestion to remove the
$ from INTERN_SERVERS="tcp_$192.168.1.2_smtp_10.10.10.200_smtp". Backed up
the firewall and rebo
Apologies for the typo in my previous messages. My two problems haven't
gone away--1) Exchange server is not receiving internet email and 2)
workstations cannot browse the web. I'm thinking my first problem is
related to Doug's problem under the recent headers: Dachstein Port
Forwarding, but si
> >It needs to be 192.168.1.2 to match the address the mail is being
> >forwarded to.
> I'll give it a try.
Didn't work. Still can only send, not receive.
> >Have you loaded the portfw module???
is it listed in the "lsmod" command?
Yep.
modulepages used by
ip_masq_portfw
Removing the "-l" in the 10.0.0.0/8
rules in ipfilter.conf will stop the logging regardless.
I could only find three instances of 10.0.0.0/8 in the file. one was
commented out, and the other 2 didn't have a "-l". Is there another
instance I'm missing?
# RFC 1918/1627/1597 blocks
# $I
It needs to be 192.168.1.2 to match the address the mail is being
forwarded to.
I'll give it a try.
Have you loaded the portfw module???
under the modules menu, ip_masq_portfw is uncommented. is there something
else that needs to be done to get it to load?
--
Okay, today I'm trying to get our Exchange 2000 mailserver online behind
the firewall.
Currently mail is set to go straight from our ISP's router to 192.168.1.2
(the ip address of our exchange server)
I'm trying to do a minimal amount of work to get the firewall in between
the ISP's router an
Thanks, Brad
> > > Feb 4 17:29:52 Nimrod kernel: Packet log: input REJECT eth1 PROTO=17
> > > 10.10.10.2:4813 10.0.0.14:161 L=84 S=0x00 I=58236 F=0x T=128 (#39)
> >This is a machine broadcasting/requesting SNMP service. Are one of
> >your boxes managing the ouside router or being polled for S
> Feb 4 17:29:52 Nimrod kernel: Packet log: input REJECT eth1 PROTO=17
> 10.10.10.2:4813 10.0.0.14:161 L=84 S=0x00 I=58236 F=0x T=128 (#39)
This is a machine broadcasting/requesting SNMP service. Are one of
your boxes managing the ouside router or being polled for SNMP info?
The only thing
If your overall LAN setup is simple enough, this will work. Since this
approach "double NATs" all the traffic (first by the LEAF router; second
by the ISP someplace), there is always some risk that something you
implement will run into a rare problem. Worry most about things that you
are port
My log file from Dachstein is getting packed with messages like this:
Feb 4 17:29:52 Nimrod kernel: Packet log: input REJECT eth1 PROTO=17
10.10.10.2:4813 10.0.0.14:161 L=84 S=0x00 I=58236 F=0x T=128 (#39)
Feb 4 17:29:52 Nimrod kernel: Packet log: input REJECT eth1 PROTO=17
10.10.10.2:4814 1
Thanks to Steve the weblet is now running. I had 10.10.10.0/255.255.255.0
added in the hosts.allow files, but didn't realize I also had to add
10.10.10./255.255.255.0 as well.
(a) port forward traffic to port 25 on the LEAF router to the
10.10.10.x mail server
(b) have the ISP r
to assign eth0 a
static ip.
3) How do I enable the weblet application? I changed the settings in the
weblet package: SERVER_NAME and SERVER_ADDR to both be 10.10.10.254 to
match the eth1 address. I also changed the CLIENT_ADDR to 10.10.10. but so
far I've been una
I'm back at work for the week now so I'll try the suggestions you guys gave
since Thursday. In the meantime, I moved the firewall to a more accessible
location and reconnected it with new cables. Now I get the following msg
popping up every few seconds:
eth0: rtl8139 Interrupt line blocked, sta
That'll teach me to send replies before checking email...
Now I updated some settings per Charles' email as follows:
dhcpd daemon config:
subnet 10.10.10.0 netmask 255.255.255.0
dnscache:
LRP internal IP--10.10.10.254
querying hosts IP's--added 10.10
hosts.allow
added--ALL: 10.10.10.0/255.255.2
After rebooting sometimes I can't ping the firewall or log in via ssh, even
if I didn't change any settings. Is this normal?
A. The "external" ISP's router is on network 192.168.1.0/24 and
provides DHCP leases for at least a portion of that network.
B. The Dachstein router is conf
Now that I check it, the ip for eth0 changed overnight--unless someone
rebooted the firewall when I wasn't here. it's new ip is 192.168.1.38 which
I can successfully ping from both the firewall and NT.
But I still can't ping past it to 208.57.96.252 (on the NT is says "Request
timed out" on the
Ray, thanks for working with me on this.
Chris -- Your routing table is sufficiently a mess that your problems are
probably a by-product of that.
I'm not even sure how to edit the routing table. The only thing I did was
th initial configuration (load the rtl8139 modules for my NICs, se
I've searched the archives, but the only thing that looked helpful to me
was the following:
"Dachstein and its predecessors block private ips by default. In Dachstein
you can just comment out the line that denies these It is in
/etc/ipfilter.conf - under stopmartians procedure # RFC 1918/1627/1
o use "ipsecnat"
for the TYPE column in the Shorewall Tunnels file.
I have a Bering-FreeS/WAN Net-to-Net VPN using BellSouth DSL (dynamic IP and
a Cayman) on one end and a T1 with a static IP on the other end and it works
great.
Chris
> -Original Message-
> From: Todd Pearsall [ma
Todd,
Why do you want the Bering box to make the PPP connection to your ISP
instead of the router? I have the same router with BellSouth DSL in Raleigh
and would like to help, but I guess I am not clear on what you are trying to
accomplish.
Chris Blackmon
> -Original Message-
>
Thanks for the help so far, and for helping me along as I limp through
this. Here is how the physical setup goes:
T1 to Adtrans (provided by our ISP which handles DHCP)
This goes to a 3Com Superstack II hub
From there we currently lease out 4 lines and connect our own LAN.
Some of the leased lin
This message is the output when I set it up to use a static external IP
address.
Thanks for the help,
Chris
Leaf Distribution:
dachstein-cd-v1.0.2
uname -a:
Linux Nimrod 2.2.19-3-LEAF-RAID #4 Sat Dec 1 17:27:59 CST 2001 i386 unknown
ip addr show:
1: lo: mtu 3924 qdisc noqueue
link
Okay, these two messages are the requested output files. This first one is
the output when I followed only the initial setup and added ssh. The next
message will be the output when I set it up to use a static external IP
address.
Thanks for the help,
Chris
Leaf Distribution:
dachstein-cd
ried a new image of Dachstein and set it up to not use a static
external IP address and same thing.
What else can I try?
Chris
---
This SF.NET email is sponsored by: Thawte.com
Understand how to protect your customers personal information by
copied the data from
syslinux.cfg into the grub command line interface (using grub on a
floppy), and it worked great.
- Chris
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www
slinux with grub entirely (I think I can), and if so, how do I do it?
Thanks and best regards,
Chris Buxton
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
Okay, I'm an idiot =)
Thanks for all the answers received and all your patience with an obvious
newbie!
Chris
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
Great! Thanks for the confirmation. I'm running into another issue though,
when I run the unmount /mnt command after making changes to config files on
the floppy I get the following msg:
Unmount: not found
Did I burn a bad copy of the CD or is there something I'm doing wrong?
Chris
Just checking,
so all I have to do then is uncomment the pci-scan line and add another
line that says rtl8139 and it should work?
Thanks,
Chris
At 03:49 PM 1/8/2003, you wrote:
You should not have to compile anything. The module is already on the CD.
Just edit the file /etc/modules to declare
e a driver from the
source code rtl8139.c, then copy it to /lib/modules/2.2.14-5.0/pcmcia then
edit the /etc/pcmcia/config file and the linuxconf. How do I do this? or,
is there an easier way to get around this?
Chris
---
This SF.NE
idn't support
CD-R. Guess that's the problem when you try to use stuff that's really too
old...
Thanks for the help!
Chris
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = S
uot;no more proccesses available on that
runlevel" and then the system freezes.
What can I do about this?
Thanks for your help,
Chris
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = So
anyone explain to me what I haven't done to get su
to allow my user to change roles to "root".
Thanks
Chris
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
er doesn't appear to
have issues when reading the data.
Chris
- Original Message -----
From: "Chris Cranford" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, December 01, 2002 2:51 AM
Subject: [leaf-user] Floppy Image Problems
> I have downloaded the v1.0 s
worked fine in the past.
Thanks for any help on the matter!
Chris
---
This SF.net email is sponsored by: Get the new Palm Tungsten T
handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/red
cerned about security. (I even disable the web interface to the cisco switches behind my firewall.)..
If your dead set on these requirements Look into Windows...
chris
I am looking for an ALL-IN-ONE solution similar to the software that is used
on the 3Com internet/server appliance that was dis
1 - 100 of 129 matches
Mail list logo
