even white of the bone,
> perhaps the flats could be a little more pronounce they are a little hard
> to see
>
> But other than that a A1 job very nice.
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.
Stainless Steel templates
Hey Guys.
Unless there are some more people talking on this posting, I think I will let
it drop for the time being.
Today I did another bone turning, that, Over all I am pretty happy with.
Bye the way, I counted all my Stainless steel templates that I
to see
>>
>> But other than that a A1 job very nice.
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* 'Curt George' via Legacy Ornamental Mills <
>> legacy-orna...@googlegroups.com>
>> *Sent:* Tuesday, February 20, 2024 12:
PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New hand made Stainless Steel templates
Hey Guys.
Unless there are some more people talking on this posting, I think I will let
it drop for the time being.
Today I did another bone turning, that, Over all I am pretty happy
legacy-ornamental-mills@googlegroups.com> wrote:
> Hey Guys.
>
> Unless there are some more people talking on this posting, I think I will
> let it drop for the time being.
> Today I did another bone turning, that, Over all I am pretty happy with.
>
> Bye the way, I counted all my S
Very nice, Curtis.
It looks like a piece of ivory.
Thanks for sharing.
Mac
-Original Message-
From:
Sent: Feb 19, 2024 8:30 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New hand made Stainless Steel templates
Hey Guys.
Unless there are some more people talking
via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Monday, February 19, 2024 3:45 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New hand made Stainless Steel templates
>
>
>
> Hello Everyone.
>
> I took t
templates
Sorry guys, Hit the send button by mistake. Here are the photos.
C.A.G.
On Sunday, February 18, 2024 at 12:44:26 PM EST, Curt George
mailto:curt.geo...@yahoo.com> > wrote:
Thanks Tim.
I just made a few more pix. for another Legacy video. On template and pen
making.
I
templates
Hello Everyone.
I took these photo's out of a Wood Chuck training video, named Profile
following. They show the template follower being used to make these 5 spindles,
The neat thing here is they only used one very simple wooden template to make
all 5 spindles.
The template is just
g. both of my Legacy's use a ball
> bearing set ,1/2" as the follower.
> My lathe uses different shaped followers depending on the cutter that I am
> using.
> As I see it the Lathe is for exact coping/fine details, where the Legacy
> is for just basic shapes. details can be
> a
depending on the cutter that I am using. As I see it the Lathe
is for exact coping/fine details, where the Legacy is for just basic shapes.
details can beadded with the Legacy, but those details are done with the router
bits profile. so as long as my templates are trueto the spindle, they do
Legacy's use a ball
> bearing set ,1/2" as the follower.
> My lathe uses different shaped followers depending on the cutter that I am
> using.
> As I see it the Lathe is for exact coping/fine details, where the Legacy
> is for just basic shapes. details can be
> added with the
I see it the Lathe is for exact coping/fine details, where the Legacy is for just basic shapes. details can beadded with the Legacy, but those details are done with the router bits profile. so as long as my templates are trueto the spindle, they do not need to be beyond just basic shapes.Note: having said th
; is for just basic shapes. details can be
> added with the Legacy, but those details are done with the router bits
> profile. so as long as my templates are true
> to the spindle, they do not need to be beyond just basic shapes.
> Note: having said that, I use both machine together on most
Hello Everyone.
Thank you all for your notes/kind words.
Rick I use to have the use of a laser, I made appx. 300 plastic templates,
that most worked out very well for me.Today I no longer have that access to
that laser, so I started going back to the olden daysmethods that worked for me
er knew that lol
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Friday, February 16, 2024 1:21 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New hand made S
al-mills@googlegroups.com
> *Subject:* Re: New hand made Stainless Steel templates
>
>
>
> Good morning Tim.
>
>
>
> "Auto Cad". When I started, the meaning of CAD was ,Cardboard Assisted .
> (Isn't is funny how meanings change over the years?) ;-p
>
>
Cardboard Assisted really I never knew that lol
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Friday, February 16, 2024 1:21 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New hand made Stainless Steel templates
Good morning Tim.
"Auto Cad"
Thanks for sharing with us about the templates.
Nice work Curt.
On Thu, Feb 15, 2024 at 3:38 PM Ed Trevillian wrote:
> Thank you Curt !
> Ed Trevillian
>
> On Thu, Feb 15, 2024, 12:55 AM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com&
Thank you Curt !
Ed Trevillian
On Thu, Feb 15, 2024, 12:55 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> Hello and Good evening everyone. (I just got home form work.)
>
> I was asked about these templates that I was making
' via Legacy Ornamental Mills
Date: Thursday, February 15, 2024 at 9:32 AM
To: 'Curt George' via Legacy Ornamental Mills
Subject: Re: New hand made Stainless Steel templates
Hello and Good morning again everyone.
I stated the Pen State was the only company that still makes templates.
This is true
oo have 20 plus years of designing and making
templates. Many by hand, but in the endmost were drawn in AutoCad then cut out
on a small CNC template machine.
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th
Ave.Foreston MN 56330
320-294-5798 shop320
Great description Curt. I too have 20 plus years of designing and making
templates. Many by hand, but in the end
most were drawn in AutoCad then cut out on a small CNC template machine.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Fore
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, February 12, 2024 10:55 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New hand made Stainless Steel templates
cy-ornamental-mills@googlegroups.com
> *Subject:* RE: New hand made Stainless Steel templates
>
>
>
> The wav attachment best mod we ever came up with
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mil
Those bone handles are really nice.
DanK
On Monday, February 12, 2024 at 5:44:33 PM UTC-5 bulk...@mmnet.com.au wrote:
> As always curt beautiful work I do love your bone milling and I see how
> the templates work well to get the great shapes well done buddy
>
>
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of bulke...@mmnet.com.au
Sent: Tuesday, February 13, 2024 9:49 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: New hand made Stainless Steel templates
The wav attachment best mod we ever came up with
Bill
From
The wav attachment best mod we ever came up with
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Tuesday, February 13, 2024 9:08 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New hand made Stainless Steel templates
Hey Mac
Yes you are right Stainless
As always curt beautiful work I do love your bone milling and I see how the
templates work well to get the great shapes well done buddy
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Tuesday, February 13, 2024 6:47 AM
To: 'Curt George' via Legacy Ornamental Mills
12, 2024 10:55 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New hand made Stainless Steel templates
Hey Curt,
They look like they turned out pretty cool .
Nice job. No reason they won't work for sure.
Great work.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork
, February 12, 2024 4:44 PM
To: Legacy ornamental mills
Subject: New hand made Stainless Steel templates
Hello Everyone.
I had some free time today, so I made these templates for my Legacy, Only one
has been tested so far, but I do think most of these should work well for my
uses
Nice curt some new shapes for your small work right?
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Monday, February 12, 2024 4:44 PM
To: Legacy ornamental mills
Subject: New hand made Stainless Steel templates
Hello Everyone.
I had some free time today, so I
ever tried cutting stainless - but have tried to drill it - and that's
a real bear! Much easier to drill angle iron.
Mac
-Original Message-
From:
Sent: Feb 12, 2024 2:32 PM
To: 'parr...@aol.com' via Legacy Ornamental Mills
Subject: Re: New hand made Stainless Steel templates
Hello Pet
Hello Peter.
Its been a while since we last talked.
The stainless steel for most of these templates are form an old kitchen sink
that was being thrown away.but stainless steel cabinets and or shelves are too
always open for projects for me. when I can findthem. Take care. (and keep in
touch
Nice work CurtWhere did you source the stainless?Peter
Sent from the all new AOL app for iOS
On Monday, February 12, 2024, 12:44 AM, 'Curt George' via Legacy Ornamental
Mills wrote:
Hello Everyone.
I had some free time today, so I made these templates for my Legacy, Only one
has been
Good morning guys!
Thank you for the kind notes.I really like to use templates, Not like I need
them but they do helpa lot to keep things as simple as possible.Jeff. On my
Legacy 1000ex and my 200 the stylist is a 1/2" ball bearing guide, And on my
Shop Smith lathethe stylist is the
haring Curt.
>>
>> What do you use for a stylus to contact the template?
>>
>> Jeff from Connecticut
>> Sent from my iPhone
>>
>> On Feb 12, 2024, at 12:44 AM, 'Curt George' via Legacy Ornamental Mills <
>> legacy-orna...@googlegroups.com> wrote:
>>
;
>
>
> Hello Everyone.
>
> I had some free time today, so I made these templates for my Legacy, Only
> one has been tested so far, but I do think most of these should work well
> for my uses.
>
> I can use these templates on All of my wood working equipment, both of m
Nice, thanks for sharing Curt.What do you use for a stylus to contact the template?Jeff from Connecticut Sent from my iPhoneOn Feb 12, 2024, at 12:44 AM, 'Curt George' via Legacy Ornamental Mills wrote:Hello Everyone.I had some free time today, so I made these templates for my Legacy, Only one
2024 at 11:44 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> Hello Everyone.
>
> I had some free time today, so I made these templates for my Legacy, Only
> one has been tested so far, but I do think most of these should work wel
On Behalf Of Dan Krager
Sent: Saturday, 21 May 2022 1:39 PM
To: Legacy Ornamental Mills
Subject: Re: electronic templates of LOM cutters
Bill, there is no problem. I have learned to combine new and old "technology"
for my recent work. I use the CAD because it is net result faster th
hem.
Each craftsman has his own preferred methods and I'm still checking out
variations and combinations of very old techniques that really work
efficiently. When I heard about using templates for milling designs, it was
natural for me to extend that to digital. Most of my mill work will be part
of CAD design work prior to building a project nowdays, so
> I thought That route might be worth pursuing before I bought templates. It
> will be awhile before I make the decision I think.
>
> DanK
>
> On Friday, May 20, 2022 at 3:58:30 PM UTC-4 timjz...@gmail.com wrote:
>
>
@googlegroups.com
Subject: Re: electronic templates of LOM cutters
The design kit consists of 3 plastic templates and a collection of 40 in x14 in
graph paper on which you sketch your design before producing it on the lom. One
problem is that there are no dimensions on the templates only replicas
Tim, I do a lot of CAD design work prior to building a project nowdays, so
I thought That route might be worth pursuing before I bought templates. It
will be awhile before I make the decision I think.
DanK
On Friday, May 20, 2022 at 3:58:30 PM UTC-4 timjz...@gmail.com wrote:
> Hey
day, 21 May 2022 9:59 AM
> *To:* LOM Group
> *Subject:* Re: electronic templates of LOM cutters
>
>
>
> Bill that link come up broke.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
2022 at 9:11 PM Jack Terry wrote:
> The design kit consists of 3 plastic templates and a collection of 40 in
> x14 in graph paper on which you sketch your design before producing it on
> the lom. One problem is that there are no dimensions on the templates only
> replicas of the Magn
oglegroups.com>> On Behalf Of Tim Ziegler
> Sent: Saturday, 21 May 2022 9:59 AM
> To: LOM Group <mailto:legacy-ornamental-mills@googlegroups.com>>
> Subject: Re: electronic templates of LOM cutters
>
> Bill that link come up broke.
>
> Kind Regards,
>
cy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 21 May 2022 9:59 AM
> *To:* LOM Group
> *Subject:* Re: electronic templates of LOM cutters
>
>
>
> Bill that link come up broke.
>
>
> Kin
legroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Dan Krager
> *Sent:* Saturday, 21 May 2022 5:28 AM
> *To:* Legacy Ornamental Mills
> *Subject:* electronic templates of LOM cutters
>
>
>
> Does anyone know if the LOM router cutter forms have been
r
Sent: Saturday, 21 May 2022 5:28 AM
To: Legacy Ornamental Mills
Subject: electronic templates of LOM cutters
Does anyone know if the LOM router cutter forms have been digitized? Are the
files available anywhere.
DanK
--
You received this message because you are subscribed to the Google
Hey Dan,
That might be a Curt or Bill question, maybe Mac knows too, but not sure.
I would think so. are you referring to the template kit we talked about?
I do have that set I mentioned.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
Does anyone know if the LOM router cutter forms have been digitized? Are
the files available anywhere.
DanK
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an
the set.Thanks.Mac
-Original Message-
From: "rtjurg...@gmail.com"
Sent: Jun 2, 2020 7:38 AM
To: "legacy-ornamental-mills@googlegroups.com"
Subject: Re: Router bit templates
I have a full set of the design templates and the long graph paper. I never use
them if someone is interest
I am. I'd LOVE to get the set.Thanks.Mac-Original Message-
From: "rtjurg...@gmail.com"
Sent: Jun 2, 2020 7:38 AM
To: "legacy-ornamental-mills@googlegroups.com"
Subject: Re: Router bit templates
I have a full set of the design templates and the long graph pap
I want them
Sent from Denson's iPhone
> On Jun 2, 2020, at 6:38 AM, "rtjurg...@gmail.com" wrote:
>
> I have a full set of the design templates and the long graph paper. I never
> use them if someone is interested.
>
> Ryan
>
> Sent from Yahoo Mail on Andr
How much you want for them?
Sent from Denson's iPhone
> On Jun 2, 2020, at 6:38 AM, "rtjurg...@gmail.com" wrote:
>
> I have a full set of the design templates and the long graph paper. I never
> use them if someone is interested.
>
> Ryan
>
> Sent from
I have a full set of the design templates and the long graph paper. I never use
them if someone is interested.
Ryan
Sent from Yahoo Mail on Android
On Mon, May 25, 2020 at 4:51 PM, 'Denson Ingram' via Legacy Ornamental
Mills wrote: I recenty bought a LOM
1200 and with it got almost
Hi Denson
If my memory serves me right here is the reason Legacy stopped making the
templates.
Legacy outsourced the job of making the templates and overtime the quality
dropped off. There were burn marks and indentations around the various
template cut outs which meant that the user got
I recenty bought a LOM 1200 and with it got almost a complete design kit. 3
router templates, long graph paper and round graph paper.
I have a friend that wants a copy of the router templates. So I contacted
another friend who has a laser engraver/cnc that said he can replicate
them. He would
-mills@googlegroups.com
Subject: Re: Design Kit and Router Bit Templates
Here you go I just busted them into single pages
Mike OK
On 2/13/2019 10:31 AM, jrigge...@gmail.com wrote:
To All,
I noticed that Legacy has now posted router bit profiles in the CNC portion of
their website. Does
nyone know of a free program that will open the file on an Apple computer?Thanks - Have a Wonderful Weekend.Mac -Original Message-
From: 4 Jim Carpenter
Sent: Feb 15, 2019 12:16 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Design Kit and Router Bit Templates
Thanks Bill, need t
Thanks Bill, need to get more printer paper so can include the pages with
my 1000xl steely
on Ebay.
On Thu, Feb 14, 2019 at 3:01 PM Bill Bulkeley wrote:
> Not sure what you’re asking but you might find this legacy training page
> on the design kit useful it has lots of picture of the tem
at Legacy has now posted router bit profiles in the CNC
>>>> portion of their website. Does this mean we can now create our own router
>>>> bit templates since they no longer make the Design Kit available for sale?
>>>>
>>>> Our local library
To All,
>>
>> I noticed that Legacy has now posted router bit profiles in the CNC
>> portion of their website. Does this mean we can now create our own router
>> bit templates since they no longer make the Design Kit available for sale?
>>
>> Our local library has a
Who has a picture of the router template - bit template
Are they the same ?
On Wed, Feb 13, 2019 at 10:31 AM wrote:
> To All,
>
> I noticed that Legacy has now posted router bit profiles in the CNC
> portion of their website. Does this mean we can now create our own router
>
egacy Ornamental Mills"
Sent: Wednesday, February 13, 2019 11:31:47 AM
Subject: Design Kit and Router Bit Templates
To All,
I noticed that Legacy has now posted router bit profiles in the CNC portion of
their website. Does this mean we can now create our own router bit templa
To All,
I noticed that Legacy has now posted router bit profiles in the CNC portion
of their website. Does this mean we can now create our own router bit
templates since they no longer make the Design Kit available for sale?
Our local library has a laser engraver/cutter available for public
@googlegroups.com
Sent: Tuesday, April 26, 2011 7:57 AM
Subject: Hole Templates for Index Gears
I drew these up in sketchup a free program from Google. I plan on mounting
them on the back of my index plates to help keep track of where I am at, when
using them, I tried the color dot method and the dots
69 matches
Mail list logo
