Dekel Tsur wrote:
On Mon, Jan 13, 2003 at 12:37:51AM +0100, Holger Zebner wrote:
how do I place figures which are included in floats exactly where they
should be in a text?
So far, I used to put !h in the extras box of Layout | Document.
But figures keep appearing somewhere out of
Olivier Ripoll wrote:
Also, how can the order be set in the present dialog box. I'm no latex
expert, but isn't there a difference between tb and bt?
No. The order does not matter.
Juergen.
Olivier == Olivier Ripoll [EMAIL PROTECTED] writes:
Olivier Also, how can the order be set in the present dialog box. I'm
Olivier no latex expert, but isn't there a difference between tb
Olivier and bt?
Although this is not clear from the docs, reading the source shows that
the order does not
Has anyone ever seen this error message or something like it?
(Trying to install it in Linux RH7.2)
4 glcanvas.c -o unshared/glcanvas.o
glcanvas.c:47:20: GL/glx.h: No such file or directory
glcanvas.c:48:19: GL/gl.h: No such file or directory
make[1]: *** [glcanvas.o] Error 1
Hi all,
I have a long equation that I was hoping to include in a lyx file,
generate from mathematica.
Essentially, I was going to insert it as ERT. Which is fine, except that
including notebook2e.sty in the preamble seems to conflict with something
else. I'm guessing it is the ams stuff. Just
When I try to export pdflatex my file I am suddenly encountering this error
that keep popping up around my float item.
Typical error box message:
Missing number treated as zero
\begin{table*}{h}
A
number should have benn
Currently using Lyx-port Win32
Cheers,
Cliona
--
Just as a followup...deleting everything else out of the preamble results
in an error
\Vec already defined
...athAccetn{\Vec}{\mathord}{letters}{'202}
which doesn't mean anything to me.
A minimal document, with the equation I'm after, does compile from the
command line.
...
Actually, I think
Hello,
I have installed lyx1.3pre2. It looks very good. I have had a small problem of
fonts in the menus. A screen dump (gzipped) is attached to this mail.
Regards
--Nabil Hathout
toto.gz
Description: Binary data
On Tue, 14 Jan 2003, Henrik Edlund wrote:
HE Hello list,
HE
HE I have been asked to write my thesis in the latex book size S5
HE so it can be printed correctly, how do I set this in LyX? I can
HE only find A* and B* and the USA page sizes.
Appearantly there is a document class named s5report,
Hi,
I want that a series of paragraph have a smaller length that the default
\linewidth and are center. So I create a minipage environment to do so. The
problem is that the minipage are handle as float, i.e. if the content of the
minipage is to important to be put at the end of a page, the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Thursday 16 January 2003 11:29, skreiv Henrik Edlund:
On Tue, 14 Jan 2003, Henrik Edlund wrote:
HE Hello list,
HE
HE I have been asked to write my thesis in the latex book size S5
HE so it can be printed correctly, how do I set this in LyX? I
Rob,
I've looked at Endnote, and an easier solution is probably to create
your own export filter, based on Endnotes. You can go to /endnote/styles
and copy their bibtex export filter to my bibtex export filter and then
edit it using the style manager in endnote to remove any fields that
give
Hi
I have a file writen in LyX 1.1.0 and now I'm working in LyX 1.2.3. When
I open the old file my tables appear in LaTeX code, of course they're
still tables and I'm able to produce a nice ps file, but I'm not able to
use the LyX facilities to format then.
Is there a way around this ?
Thanks
On Thu, Jan 16, 2003 at 11:49:21AM +0100, Pascal Francq wrote:
I want that a series of paragraph have a smaller length that the default
\linewidth and are center. So I create a minipage environment to do so. The
problem is that the minipage are handle as float, i.e. if the content of the
On Thu, 16 Jan 2003, Ingar Pareliussen wrote:
IP I guess this is some swedish standard ? Accordingly to page:
IP http://publications.uu.se/helpdesk/faq/ it is 164x242mm. You
IP could try to use a regular report class and use custom page
IP size. If this s5report has something special you have to
Hello
I am still using LyX 1.1.6fix.
For some time I am looking for converts
LaTeX2XXX with math, where XXX should be some format which a word
processor such as OO (preferred) can read.
Curiously enough, the other direction XXX2latex, seems easier, there
is Word2tex, writer2latex.
There is
On Thu, Jan 16, 2003 at 01:04:45PM -0100, Uwe Brauer wrote:
I am still using LyX 1.1.6fix.
Poor little tiger.
XXX could be either rtf or some xml format, I don't know whether
docbook, includes math, but may be it will be supported by OO.
We write something similar to MathML when exporting to
Andre Poenitz schrieb:
On Thu, Jan 16, 2003 at 11:49:21AM +0100, Pascal Francq wrote:
I want that a series of paragraph have a smaller length that the default
\linewidth and are center. So I create a minipage environment to do so. The
problem is that the minipage are handle as float, i.e. if
On Thu, 16 Jan 2003, Henrik Edlund wrote:
On Thu, 16 Jan 2003, Ingar Pareliussen wrote:
IP I guess this is some swedish standard ? Accordingly to page:
IP http://publications.uu.se/helpdesk/faq/ it is 164x242mm. You
IP could try to use a regular report class and use custom page
IP size.
Is there a way to prevent the last line of a paragraph to appear on
top of a page while still keeping within the margins?
TIA
myriam
On Thu, Jan 16, 2003 at 08:09:44AM -0500, Myriam Abramson wrote:
Is there a way to prevent the last line of a paragraph to appear on
top of a page while still keeping within the margins?
Would \widowpenalty=1000 in ERT (150 is standard, 1 is max) help?
[Or was it \clubpenalty? I always
Myriam Abramson schrieb:
Is there a way to prevent the last line of a paragraph to appear on
top of a page while still keeping within the margins?
if you need it only for one page write in TeX anywhere in
this page
\enlargethispage*{2ex}
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
I try to write a simple letter using lyx1.2.3 (class/layout letter), but
it fails with the \opening stuff. The lyx error message means that
\opening is not recognized.
Actually, if I export my letter in tex, the \begin{letter} ...
\end{letter} does not appear !
Is there something that I missed
Ernesto Jardim wrote:
I have a file writen in LyX 1.1.0 and now I'm working in LyX 1.2.3. When
I open the old file my tables appear in LaTeX code, of course they're
still tables and I'm able to produce a nice ps file, but I'm not able to
use the LyX facilities to format then.
There should be
Hy all,
I hav a problem when i am going to see my document. Instead of see a
table i see ++--++--|ignacio| and more of this characters.
What could be the problem.
Thanks in advance.
--
--
Ignacio Ramos García
On Thu, Jan 16, 2003 at 02:51:28PM +0100, Ignacio Ramos García wrote:
Hy all,
I hav a problem when i am going to see my document.
How do you see your document? Export as text?
Have you tried dvi or PostScript?
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not
Christian Ridderström wrote:
I'm writing my thesis, and I've set the size after measuring the size
of our thesis. I came up with 138x238 mm, but just now I tried searching
for S5-format and found several sizes:170x240, 165x238, 170x238
Does anybody know what the actual size really
-BEGIN PGP SIGNED MESSAGE-
On Donnerstag, 16. Januar 2003 14:07, Christian Ridderström wrote:
or just download a tar-file:
http://www.md.kth.se/~chr/lyx/thesis-example.tar.gz
Knowing nothing about S5, but nice example.
But, why are you setting paper-width and height in the
On Thursday 16 January 2003 13:30, Matej Cepl wrote:
There should be script lyx2lyx somewhere around www.lyx.org,
which should help.
That comes with 1.3.0pre...
Matej
--
José Abílio
On Thu, 16 Jan 2003, Kornel Benko wrote:
But, why are you setting paper-width and height in the preamble.tex?
(The menu Layout-Document-Paper seems to be more natural)
I can then include the preamble-file in other documents and get all the
correct settings in one go... this is useful when I
On Thu, 16 Jan 2003, Matej Cepl wrote:
Christian Ridderström wrote:
I'm writing my thesis, and I've set the size after measuring the size
of our thesis. I came up with 138x238 mm, but just now I tried searching
for S5-format and found several sizes: 170x240, 165x238, 170x238
On Thu, 16 Jan 2003, Christian Ridderström wrote:
CR That makes sense and could explain two of the sizes... but I've found
CR lots of them... (there was also the sizes 165x240, 165x242 and 168x236)
CR
CR btw, I'd made a type above, the size I'm using is 168x238. I guess that's
CR very close to
-Original Message-
From: Holger Zebner [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 14, 2003 12:56 PM
To: Reuter, Joseph; [EMAIL PROTECTED]
Subject: RE: placement of figures/floats
how do I place figures which are included in floats exactly
where they
should be
Reuter, Joseph schrieb:
I asked the search engine at www.tug.org about captions. The packages at macros/contrib/supported/nonfloat and macros/contrib/supported/ccaption both have the capability to insert captions outside of a float. At worst, you have to insert them using ERT.
no, you can
On Thu, Jan 16, 2003, Uwe Brauer wrote:
For some time I am looking for converts
LaTeX2XXX with math, where XXX should be some format which a word
processor such as OO (preferred) can read.
Curiously enough, the other direction XXX2latex, seems easier, there
is Word2tex, writer2latex.
I've got a couple of questions that I haven't been able to resolve on
either the list archive or Herbert's page. I'm using lyx 1.2.1 on a bsd
system.
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space
On Thu, Jan 16, 2003 at 11:04:44AM -0600, Kirk R. Wythers wrote:
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space after the tex code\textcelsius, however, upon printing
the space after the symbol
-BEGIN PGP SIGNED MESSAGE-
On Donnerstag, 16. Januar 2003 18:04, Kirk R. Wythers wrote:
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space after the tex code\textcelsius, however, upon
Kirk R. Wythers schrieb:
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space after the tex code\textcelsius, however, upon printing
the space after the symbol appears lost (i.e. the degreeC symbol runs
On Thu, Jan 16, 2003 at 11:17:32AM -0600, Kirk R. Wythers wrote:
Could you send a _minimal_ example .lyx file that shows this behaviour?
Here is a example... thanks
*ARGH* I did not ask for an example, but for a minimal one.
100k does not count as minimal.
---
There seems to be a problem
On Thu, 2003-01-16 at 11:30, Herbert Voss wrote:
Kirk R. Wythers schrieb:
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space after the tex code\textcelsius, however, upon printing
the space
On Wed, Jan 15, 2003 at 09:30:54AM +, Cliona Molony wrote:
When I try to export pdflatex my file I am suddenly encountering this
error that keep popping up around my float item.
Typical error box message:
Missing number treated as zero
\begin{table*}{h}
A
number should
On Thu, Jan 16, 2003 at 11:35:57AM -0600, Kirk R. Wythers wrote:
I suppose that you have a longtable as the second one.
they are regular tables... they used to be long tables, but I switched
them to regular tables by inserting a new regular table, then copying
and pasting...
lyxtabular
Andre Poenitz [EMAIL PROTECTED] writes:
On Thu, Jan 16, 2003 at 01:04:45PM -0100, Uwe Brauer wrote:
I am still using LyX 1.1.6fix.
Poor little tiger.
I am deeply moved.
XXX could be either rtf or some xml format, I don't know whether
docbook, includes math, but may be it will be supported
David A. Case [EMAIL PROTECTED] writes:
There is also tex2word, the companion to word2tex. See:
http://www.word2tex.com
Yep I know about it, does not work so well for me so I gave up
This has worked pretty well for me, but a little fine tuning of the
output word document is
On Thu, 16 Jan 2003, Henrik Edlund wrote:
On Thu, 16 Jan 2003, Christian Ridderström wrote:
CR That makes sense and could explain two of the sizes... but I've found
CR lots of them... (there was also the sizes 165x240, 165x242 and 168x236)
CR
CR btw, I'd made a type above, the size I'm
Kirk R. Wythers schrieb:
I suppose that you have a longtable as the second one.
they are regular tables... they used to be long tables, but I switched
them to regular tables by inserting a new regular table, then copying
and pasting...
look for the second one. Click with right mouse button
On Thu, 16 Jan 2003, Christian Ridderström wrote:
CR I'm leaning towards that the trimmed S5 size is about 168x236mm, since
CR I actually measured the size as 168x238, and the extra 2mm in page
CR width might well be because of the binding. (It was also difficult in
CR general to measure the
On Thu, 16 Jan 2003, Henrik Edlund wrote:
On Thu, 16 Jan 2003, Christian Ridderström wrote:
CR I'm leaning towards that the trimmed S5 size is about 168x236mm, since
CR I actually measured the size as 168x238, and the extra 2mm in page
CR width might well be because of the binding. (It was
David Norris [EMAIL PROTECTED] wrote in
[EMAIL PROTECTED]:">news:[EMAIL PROTECTED]:
Dear All,
I'm using the slides(foiltex) environment in Lyx. It seems to ignore
all
my commands \mathtt \mathbf \mathrm
Does anyone have any solutions?
Many thanks,
David
It may not have
On Thu, 16 Jan 2003, Christian Ridderström wrote:
CR http://www.sgr.nada.kth.se/misc/tex/nadapkg/nadarapp.pdf
CR
CR where they say that a thesis is normally printed on the page format
CR
CR G5, 240mm x 170mm
CR
CR (I don't think it's a typo... they use G5 in two places)
CR
CR They are
On Thu, 16 Jan 2003, Henrik Edlund wrote:
On Thu, 16 Jan 2003, Christian Ridderström wrote:
CR http://www.sgr.nada.kth.se/misc/tex/nadapkg/nadarapp.pdf
CR
CR where they say that a thesis is normally printed on the page format
CR
CR G5, 240mm x 170mm
CR
CR (I don't think it's a
On Thu, 16 Jan 2003, Christian Ridderström wrote:
CR And I've also found that both G5 and S5 seems to be standard
CR formats...
CR
CR http://www.books-on-demand.com/handbok/bokens_format.htm
CR
CR they write that G5, 169x239 mm, for educational stuff, and
CR Statsformat, 165x242 mm, for
Henrik Edlund said:
This is a jungle and nobody seems to know anything about it. Not
even the people responsible. Sigh.
I am going to talk to the university printers tomorrow and see if
they can shed some light on this.
That's the proper place for an authoritative answer.
Belike the
On Thu, 16 Jan 2003, Henrik Edlund wrote:
I guess that settles it.
Statsformat is for non-Swedish readers, government format.
Hopefully... just for fun I read some more at that site. This page was
kind of interesting:
http://www.books-on-demand.com/Kalkyl.asp
you can enter how
Nicolas Ferre' schrieb:
I try to write a simple letter using lyx1.2.3 (class/layout letter), but
it fails with the \opening stuff. The lyx error message means that
\opening is not recognized.
Actually, if I export my letter in tex, the \begin{letter} ...
\end{letter} does not appear !
Is there
On Fri, Jan 10, 2003 at 09:06:02AM +1030, Paul Medwell wrote:
FYI...
Changing the label to upper-case did not work, but adding
\def\MakeUppercase#1{#1}
to the pre-amble did.
Changing the label to upper case should work.
On Tue, Jan 14, 2003 at 01:30:07PM +1300, John O'Gorman wrote:
I'm still trying to master LyX's seminar class (before going on to
Prosper).
I am dismayed to find that seminar seems to be a class where it is
harder to create a document using LyX. I hope someone can give
me the hint that
On Wed, Jan 15, 2003 at 03:38:09PM -0800, Howard Philips wrote:
At this point everything looks all right at the LyX
window. If I view my document by doing View - DVI or
View - Postscript from the main menu, the figure
appears just as expected.
The problem is, when I print the
On Thu, Jan 16, 2003 at 05:42:10PM +0800, Rod Pinna wrote:
Just as a followup...deleting everything else out of the preamble results
in an error
\Vec already defined
...athAccetn{\Vec}{\mathord}{letters}{'202}
which doesn't mean anything to me.
Both notebook2e.sty and amsmath tries to
I don't mean this to be a big issue - I'm quite happy to use the command
in the pre-amble.
For your information, I have attached an example file that doesn't work
on my machine with the label in upper-case.
Perhaps it is because I am only using LyX 1.2.1?
Thanks for your interest in this
Both notebook2e.sty and amsmath tries to define a \Vec command...
Actually, I think I found it...the amsmath package needs to come after
notebook2e.sty
Is that possible?
No, but you can put
\let\Vec=\undefined
in the preamble.
Thanks very much. The root of the problem is
Dear Paul,
Yes it works, many thanks. My upcoming set of lecture notes was the
first thing I had written Lyx 1.2.3 and my first time with FoilTex. I
got used to entering \mathtt etc by hand in Lyx 1.1 and as I got the
brackets I never suspect Lyx further.
Best wishes,
David
Paul A. Rubin
Dekel Tsur wrote:
On Mon, Jan 13, 2003 at 12:37:51AM +0100, Holger Zebner wrote:
how do I place figures which are included in floats exactly where they
should be in a text?
So far, I used to put !h in the extras box of Layout | Document.
But figures keep appearing somewhere out of
Olivier Ripoll wrote:
Also, how can the order be set in the present dialog box. I'm no latex
expert, but isn't there a difference between tb and bt?
No. The order does not matter.
Juergen.
Olivier == Olivier Ripoll [EMAIL PROTECTED] writes:
Olivier Also, how can the order be set in the present dialog box. I'm
Olivier no latex expert, but isn't there a difference between tb
Olivier and bt?
Although this is not clear from the docs, reading the source shows that
the order does not
Has anyone ever seen this error message or something like it?
(Trying to install it in Linux RH7.2)
4 glcanvas.c -o unshared/glcanvas.o
glcanvas.c:47:20: GL/glx.h: No such file or directory
glcanvas.c:48:19: GL/gl.h: No such file or directory
make[1]: *** [glcanvas.o] Error 1
Hi all,
I have a long equation that I was hoping to include in a lyx file,
generate from mathematica.
Essentially, I was going to insert it as ERT. Which is fine, except that
including notebook2e.sty in the preamble seems to conflict with something
else. I'm guessing it is the ams stuff. Just
When I try to export pdflatex my file I am suddenly encountering this error
that keep popping up around my float item.
Typical error box message:
Missing number treated as zero
\begin{table*}{h}
A
number should have benn
Currently using Lyx-port Win32
Cheers,
Cliona
--
Just as a followup...deleting everything else out of the preamble results
in an error
\Vec already defined
...athAccetn{\Vec}{\mathord}{letters}{'202}
which doesn't mean anything to me.
A minimal document, with the equation I'm after, does compile from the
command line.
...
Actually, I think
Hello,
I have installed lyx1.3pre2. It looks very good. I have had a small problem of
fonts in the menus. A screen dump (gzipped) is attached to this mail.
Regards
--Nabil Hathout
toto.gz
Description: Binary data
On Tue, 14 Jan 2003, Henrik Edlund wrote:
HE Hello list,
HE
HE I have been asked to write my thesis in the latex book size S5
HE so it can be printed correctly, how do I set this in LyX? I can
HE only find A* and B* and the USA page sizes.
Appearantly there is a document class named s5report,
Hi,
I want that a series of paragraph have a smaller length that the default
\linewidth and are center. So I create a minipage environment to do so. The
problem is that the minipage are handle as float, i.e. if the content of the
minipage is to important to be put at the end of a page, the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Thursday 16 January 2003 11:29, skreiv Henrik Edlund:
On Tue, 14 Jan 2003, Henrik Edlund wrote:
HE Hello list,
HE
HE I have been asked to write my thesis in the latex book size S5
HE so it can be printed correctly, how do I set this in LyX? I
Rob,
I've looked at Endnote, and an easier solution is probably to create
your own export filter, based on Endnotes. You can go to /endnote/styles
and copy their bibtex export filter to my bibtex export filter and then
edit it using the style manager in endnote to remove any fields that
give
Hi
I have a file writen in LyX 1.1.0 and now I'm working in LyX 1.2.3. When
I open the old file my tables appear in LaTeX code, of course they're
still tables and I'm able to produce a nice ps file, but I'm not able to
use the LyX facilities to format then.
Is there a way around this ?
Thanks
On Thu, Jan 16, 2003 at 11:49:21AM +0100, Pascal Francq wrote:
I want that a series of paragraph have a smaller length that the default
\linewidth and are center. So I create a minipage environment to do so. The
problem is that the minipage are handle as float, i.e. if the content of the
On Thu, 16 Jan 2003, Ingar Pareliussen wrote:
IP I guess this is some swedish standard ? Accordingly to page:
IP http://publications.uu.se/helpdesk/faq/ it is 164x242mm. You
IP could try to use a regular report class and use custom page
IP size. If this s5report has something special you have to
Hello
I am still using LyX 1.1.6fix.
For some time I am looking for converts
LaTeX2XXX with math, where XXX should be some format which a word
processor such as OO (preferred) can read.
Curiously enough, the other direction XXX2latex, seems easier, there
is Word2tex, writer2latex.
There is
On Thu, Jan 16, 2003 at 01:04:45PM -0100, Uwe Brauer wrote:
I am still using LyX 1.1.6fix.
Poor little tiger.
XXX could be either rtf or some xml format, I don't know whether
docbook, includes math, but may be it will be supported by OO.
We write something similar to MathML when exporting to
Andre Poenitz schrieb:
On Thu, Jan 16, 2003 at 11:49:21AM +0100, Pascal Francq wrote:
I want that a series of paragraph have a smaller length that the default
\linewidth and are center. So I create a minipage environment to do so. The
problem is that the minipage are handle as float, i.e. if
On Thu, 16 Jan 2003, Henrik Edlund wrote:
On Thu, 16 Jan 2003, Ingar Pareliussen wrote:
IP I guess this is some swedish standard ? Accordingly to page:
IP http://publications.uu.se/helpdesk/faq/ it is 164x242mm. You
IP could try to use a regular report class and use custom page
IP size.
Is there a way to prevent the last line of a paragraph to appear on
top of a page while still keeping within the margins?
TIA
myriam
On Thu, Jan 16, 2003 at 08:09:44AM -0500, Myriam Abramson wrote:
Is there a way to prevent the last line of a paragraph to appear on
top of a page while still keeping within the margins?
Would \widowpenalty=1000 in ERT (150 is standard, 1 is max) help?
[Or was it \clubpenalty? I always
Myriam Abramson schrieb:
Is there a way to prevent the last line of a paragraph to appear on
top of a page while still keeping within the margins?
if you need it only for one page write in TeX anywhere in
this page
\enlargethispage*{2ex}
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
I try to write a simple letter using lyx1.2.3 (class/layout letter), but
it fails with the \opening stuff. The lyx error message means that
\opening is not recognized.
Actually, if I export my letter in tex, the \begin{letter} ...
\end{letter} does not appear !
Is there something that I missed
Ernesto Jardim wrote:
I have a file writen in LyX 1.1.0 and now I'm working in LyX 1.2.3. When
I open the old file my tables appear in LaTeX code, of course they're
still tables and I'm able to produce a nice ps file, but I'm not able to
use the LyX facilities to format then.
There should be
Hy all,
I hav a problem when i am going to see my document. Instead of see a
table i see ++--++--|ignacio| and more of this characters.
What could be the problem.
Thanks in advance.
--
--
Ignacio Ramos García
On Thu, Jan 16, 2003 at 02:51:28PM +0100, Ignacio Ramos García wrote:
Hy all,
I hav a problem when i am going to see my document.
How do you see your document? Export as text?
Have you tried dvi or PostScript?
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not
Christian Ridderström wrote:
I'm writing my thesis, and I've set the size after measuring the size
of our thesis. I came up with 138x238 mm, but just now I tried searching
for S5-format and found several sizes:170x240, 165x238, 170x238
Does anybody know what the actual size really
-BEGIN PGP SIGNED MESSAGE-
On Donnerstag, 16. Januar 2003 14:07, Christian Ridderström wrote:
or just download a tar-file:
http://www.md.kth.se/~chr/lyx/thesis-example.tar.gz
Knowing nothing about S5, but nice example.
But, why are you setting paper-width and height in the
On Thursday 16 January 2003 13:30, Matej Cepl wrote:
There should be script lyx2lyx somewhere around www.lyx.org,
which should help.
That comes with 1.3.0pre...
Matej
--
José Abílio
On Thu, 16 Jan 2003, Kornel Benko wrote:
But, why are you setting paper-width and height in the preamble.tex?
(The menu Layout-Document-Paper seems to be more natural)
I can then include the preamble-file in other documents and get all the
correct settings in one go... this is useful when I
On Thu, 16 Jan 2003, Matej Cepl wrote:
Christian Ridderström wrote:
I'm writing my thesis, and I've set the size after measuring the size
of our thesis. I came up with 138x238 mm, but just now I tried searching
for S5-format and found several sizes: 170x240, 165x238, 170x238
On Thu, 16 Jan 2003, Christian Ridderström wrote:
CR That makes sense and could explain two of the sizes... but I've found
CR lots of them... (there was also the sizes 165x240, 165x242 and 168x236)
CR
CR btw, I'd made a type above, the size I'm using is 168x238. I guess that's
CR very close to
-Original Message-
From: Holger Zebner [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 14, 2003 12:56 PM
To: Reuter, Joseph; [EMAIL PROTECTED]
Subject: RE: placement of figures/floats
how do I place figures which are included in floats exactly
where they
should be
Reuter, Joseph schrieb:
I asked the search engine at www.tug.org about captions. The packages at macros/contrib/supported/nonfloat and macros/contrib/supported/ccaption both have the capability to insert captions outside of a float. At worst, you have to insert them using ERT.
no, you can
On Thu, Jan 16, 2003, Uwe Brauer wrote:
For some time I am looking for converts
LaTeX2XXX with math, where XXX should be some format which a word
processor such as OO (preferred) can read.
Curiously enough, the other direction XXX2latex, seems easier, there
is Word2tex, writer2latex.
I've got a couple of questions that I haven't been able to resolve on
either the list archive or Herbert's page. I'm using lyx 1.2.1 on a bsd
system.
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space
On Thu, Jan 16, 2003 at 11:04:44AM -0600, Kirk R. Wythers wrote:
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space after the tex code\textcelsius, however, upon printing
the space after the symbol
1 - 100 of 189 matches
Mail list logo