be someone has already a clue what the problem is.
Thanks,
Oliver
On Tue, 09 Jun 2015, Theo de Raadt wrote:
> > entry point at 0x1000160 [7205c766, 3404, 24448b12, 1080a304]
> > == At this point the system reboots. No further messages.
>
> Your kernel is probably too large. A limitation in the bootblocks.
Do you mean the kernel with the ramdisk or without
st want to say that this problem is fixed in OpenBSD 5.8-beta. The
problem is not the bootloader. Can someone point me to the right direction to
backport the changes to 5.7?
Thanks,
Oliver
On Sat, 11 Jul 2015, Joel Rees wrote:
> 2015/07/10 22:12 "Oliver" :
> >
> > Hello,
> >
> > On Tue, 09 Jun 2015, Theo de Raadt wrote:
> > > > > > entry point at 0x1000160 [7205c766, 3404, 24448b12, 1080a304]
> > >
On Thu, 28 Apr 2005, Thorsten Glaser wrote:
> Oliver Fuchs dixit:
>
> [ ppp.linkup trouble ]
>
> $ sudo cat /etc/ppp/ppp.linkup
> MYADDR:
> add! default HISADDR
> !bg /bin/ksh /etc/ppp/ip-up tun0 vtty sync MYADDR HISADDR
>
> ifwatchd(8) [from NetBSD.] does appro
add! default HISADDR
!bg /usr/sbin/sendmail -L sm-msp-queue -Ac -q
I tried here also to activate delete ALL and the add command and
deactivated but I still get this error message.
I do not use any /etc/mygate.
Thanks for any hint or help
Oliver
Hi,
I have an openbsd firewall on my home network.
My daughter has become addicted to msn and I've spoken to her about
restricting the time she spends on it.
What I want to do is only allow her access to msn for say 1 or 2 hours a
day and enforce this on the firewall as well.
I can block a
enBSD normally use?
It is 4.2BSD
> (2) How do I format a drive under OpenBSD?
In OpenBSD FAQ you find:
14.3 - Adding extra disks in OpenBSD
Oliver
--
... don't touch the bang bang fruit
nly way to avoid setting this permissions to change them in
/var/mail by hand?
Oliver
--
... don't touch the bang bang fruit
On Sun, 03 Jul 2005, [EMAIL PROTECTED] wrote:
> On Sat, Jul 02, 2005 at 01:01:51AM +0200, Oliver Fuchs wrote:
> >
> > Problem:
> > using procmail as local mailer sets the wrong permissions in /var/mail.
> > Question:
> > So my issue is that using procma
sung YP-35, rev 1.10/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: SCSI4 0/direct removable
sd0: 122MB, 122 cyl, 64 head, 32 sec, 512 bytes/sec, 250880 sec total
Oliver
--
... don't touch the bang bang fruit
On Mon, 29 Aug 2005, Chris Kuethe wrote:
> On 8/29/05, Barry Dexter A. Gonzaga <[EMAIL PROTECTED]> wrote:
> > Good Day!
> >
> > On Mon, Aug 29, 2005 at 11:17:22PM +0200, Oliver Fuchs wrote:
> > > Hi,
> > > I mount my mp3 player
> > > (in /
IOS disk 80
> Sep 25 11:47:37 puffy /bsd: root on wd0a
> Sep 25 11:47:37 puffy /bsd: rootdev=0x0 rrootdev=0x300 rawdev=0x302
> Sep 25 11:47:38 puffy savecore: no core dump
> Sep 25 12:59:46 puffy /bsd: cd0(atapiscsi0:0:0): Check Condition (error
> 0x70) on opcode 0x28
> Sep 25 12:59:46 puffy /bsd: SENSE KEY: Illegal Request
> Sep 25 12:59:46 puffy /bsd: ASC/ASCQ: Illegal Mode For This Track
>
> Is there any way to copy dmesg from the terminal and past it into an x
> window? Or just to copy anything between a terminal and x?
What about:
dmesg > /tmp/dmesg_for_x
and then open it with your favorite editor.
Oliver
>
> I've checked the archives and come up empty.
--
... don't touch the bang bang fruit
or: client killed
kdeinit: sending SIGHUP to children.
kicker: sighandler called
kicker: Fatal IO error: client killed
Vim: Finished.
[25;1Hkdeinit: Fatal IO error: client killed
kdeinit: sending SIGHUP to children.
Question:
I am not sure if this is a bug or simply a big mistake by me although
I
On Thu, 20 Oct 2005, Chris Kuethe wrote:
> On 20/10/05, Oliver Fuchs <[EMAIL PROTECTED]> wrote:
> > [?1h=[1;25r[34l[34h[?25h[23m[24m[m[H[JIn file
> > kernel/qpixmap_x11.cpp, line 630: Out of memory
>
> Can't say for sure what the root cause of this is
On Thu, 20 Oct 2005, Oliver Fuchs wrote:
> On Thu, 20 Oct 2005, Chris Kuethe wrote:
>
> > On 20/10/05, Oliver Fuchs <[EMAIL PROTECTED]> wrote:
> > > [?1h=[1;25r[34l[34h[?25h[23m[24m[m[H[JIn file
> > > kernel/qpixmap_x11.cpp, line 630: Out of mem
happened to this site?
Oliver
--
... don't touch the bang bang fruit
the 11 OpenBSD songs.
--
Oliver Peter, email: [EMAIL PROTECTED], ICQ# 113969174
"Worker bees can leave. Even drones can fly away. The Queen is their slave."
On Sun, Mar 26, 2006 at 07:15:07PM +0200, Oliver Peter wrote:
> On Sun, Mar 26, 2006 at 05:26:55PM +, Qwerty wrote:
> > Hi All, Could anyone please tell me if the book "Building firewalls with
> > OpenBSD and PF" (found at Amazon), would still be applicable today, or
Hi Group,
we are trying to run an apache on an openbsd 3.8 on a sun E420 as
proxy-server for some internal applications.
The problem is, that setting up the proxy does not work correctly ...
It does only use the port-settings of the server, it should connect, but
seems to decline the ip-address c
Hi List,
maybe can tell me what4s wrong or missing ?
Trying to compile an apache 2.0.52 ...
configure says ...
Platform: sparc64-unknown-openbsd3.8
checking for working mkdir -p... yes
APR Version: 0.9.7
checking for chosen layout... apr
checking for gcc... egcc
checking for C compiler default
On Thu, Mar 30, 2006 at 12:49:29PM +0200, oliver simon wrote:
> checking for C compiler default output file name... configure: error: C
> compiler cannot create executables
Could you please provide us your CFLAGS?
--
Oliver Peter, email: [EMAIL PROTECTED], ICQ# 113969174
"Worker bee
Thanks for your answers,
@Oliver: Could you please provide us your CFLAGS?
Nothing specific set .. only in the myconfigure.sh I do
export CC=egcc
export CPPFLAGS="-I \
/usr/local/lib/gcc/sparc64-unknown-openbsd3.8/3.4.4/include/"
I hoped, it would find some header there, but no succe
On Thu, Mar 30, 2006 at 02:17:24PM +0200, oliver simon wrote:
> @Oliver: Could you please provide us your CFLAGS?
>
> Nothing specific set .. only in the myconfigure.sh I do
>
> export CC=egcc
> export CPPFLAGS="-I \
> /usr/local/lib/gcc/sparc64-unknown-openbsd3.8/3
Hi namesake,
please see below ...
Oliver Peter wrote:
> On Thu, Mar 30, 2006 at 02:17:24PM +0200, oliver simon wrote:
>>@Oliver: Could you please provide us your CFLAGS?
>>
>>Nothing specific set .. only in the myconfigure.sh I do
>>
>>export CC=egcc
>>exp
On Thu, Mar 30, 2006 at 02:53:44PM +0200, oliver simon wrote:
> Hi namesake,
Hee =)
> > Why don't you use the gcc which is already shipped with openbsd?
> Did not find it ... now I know where to look .. comp38.tgz ...
Do your homework:
http://openbsd.org/faq/faq4.html#FilesN
On Thu, Mar 30, 2006 at 02:53:44PM +0200, oliver simon wrote:
> Seems it has a bug in 3.8 and sparc64. Just need it for proxying
> purposes, and exactly that does not work while I tried exactly the same
> config on a x86 Test-Machine. See my problem some days ago, where nobody
> seemed
y question - I don't want to attack our loved project but does
that mean that we've got a second remote hole? Don't kick my ass.
--
Oliver Peter, email: [EMAIL PROTECTED], ICQ# 113969174
"Worker bees can leave. Even drones can fly away. The Queen is their slave."
On Fri, Mar 31, 2006 at 05:41:03PM +0200, Robert Waldner wrote:
> root addr=192.168.1.1 path=/data/cdimages/OpenBSD/root
Is 192.168.1.1:/data/cdimages/OpenBSD/root mountable via NFS/udp from
192.168.1.167 - there you have to place the bootkernel.
--
Oliver Peter, email: [EMAIL PROTECTED],
Hi Robert,
On Fri, Mar 31, 2006 at 06:44:12PM +0200, Robert Waldner wrote:
> On Fri, 31 Mar 2006 18:03:56 +0200, Oliver Peter writes:
> >> root addr=192.168.1.1 path=/data/cdimages/OpenBSD/root
> >Is 192.168.1.1:/data/cdimages/OpenBSD/root mountable via NFS/udp from
> >1
Hope this is OK to place this commercial:
Watch this nice and complete OpenBSD fan set from ixsoft:
http://www.ixsoft.de/cgi-bin/web_store.cgi?ref=Products/de/OOOB0390BU.html
--
Oliver Peter, email: [EMAIL PROTECTED], ICQ# 113969174
"Worker bees can leave. Even drones can fly away. The Que
ver
> server 0.north-america.pool.ntp.prg
^^^ :)
Could you please provide us the output of 'ls -l /etc/localtime' and
the output of rdate? Maybe this can help us to resolve the problem.
Bye
Ollie
--
Oliver Peter, email: [EMAIL PROTECTED], ICQ# 11396
y hints? Did I do something wrong? Is there a fix? Or do I have to
> travel 400 km?
Have you got a chance to connect via a serial terminal?
Please give us further informations how you did the update.
old version, new version, source update, generic kernel etc.
--
Oliver Peter, email: [EMAIL P
o load the plugin. Anybody has
> licq working with icqnd?
I can not imagine there's someone here who can/will help you.
Your problem is not OpenBSD specific enough.
Try it here:
http://sourceforge.net/mail/?group_id=254
Good luck.
--
Oliver Peter, email: [EMAIL PROTECTED], ICQ# 1139691
nes(0x), rev 0.01
port 2 powered
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
--
Ron Oliver
Forgot the dmesg. Here it is:
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,P
functionality as a Soekris for the half price.
--
Oliver PETER, email: [EMAIL PROTECTED], ICQ# 113969174
"Worker bees can leave. Even drones can fly away. The Queen is their slave."
[demime 1.01d removed an attachment of type application/pgp-signature]
port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fffd netmask fffd ttymask
rd0: fixed, 3800 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
--
Oliver PETER, email: [EMAIL PROTECTED], ICQ# 113969174
"Worker bees can leave. Even drones can fly away. The Queen is their slave."
On 5/12/07, Alex Holst <[EMAIL PROTECTED]> wrote:
>
> Quoting Tobias Weingartner <[EMAIL PROTECTED]>:
> > xdpyinfo | grep dim
>
> tori$ xdpyinfo | grep dim
> dimensions:1680x1050 pixels (474x303 millimeters)
>
> And my current xorg.conf with what I believe are correct HorizSync and
> VertRefr
Hi,
I have the problem here on my i386:
with running startx or startkde I
receive always the resolution 1400x1050 with 75Hz on my ATI Radeon 9600. But I
can change the resolution in kde to [EMAIL PROTECTED] - so that is not the
problem. I do not know why my modelines are not accepted:
See my xorg
k
configurations, relevant disk hardware manuals and a calculator are useful.
Proceed with install? [no] y
Cool! Let's get to it.
You will now initialize the disk(s) that OpenBSD will use. To enable all
available security features you should configure the disk(s) to allow the
creation of separate filesystems for /, /tmp, /var, /usr, and /home.
No disks found.
#
--
Ron Oliver
to the system when I get back? I can leave it
at your disposal for a few days (and type as needed) if it will help
the cause.
I also have a 3Ware 8006-2LP and a pair of SATA disks to install in it
(for a RAID-1 configuration) as well once the base system is stable,
if that's of interest to anyone.
Thanks again,
--
Ron Oliver
7;t echo anything. If I keep
hitting Enter, eventually the system beeps on each key as if its input
buffer is full (which I suspect it is,) but never echoes anything
back. Ctrl-Alt-Del reboots, though.
--
Ron Oliver
int at " for a few
minutes, then stalls again a couple of times. But it will finally
come up and appears to run ok after that.
--
Ron Oliver
> [...]
> picoBSD
> nanoBSD
>
> The latter three are probably just stripped-down versions of
> the bigger ones.
True. It could be argued whether they should be counted
separately. Personally I don't think they should. The
"big ones" are clearly Dr
ipw/ipw-openbsd.html
Have fun.
--
Oliver Peter, email: [EMAIL PROTECTED], ICQ# 113969174
"Worker bees can leave. Even drones can fly away. The Queen is their slave."
e=0
wd0: no disk label
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd1a
rootdev=0x10 rrootdev=0x310 rawdev=0x312
Oliver
--
... don't touch the bang bang fruit
hi bsd-gurus ...
we are currently trying to set up an openbsd host, and have a problem
with source-routing mechanisms !?
Setup is as following:
(all IP4s examples)
hme1 -> 10.50.0.10
hme0 -> 217.5.23.69
hme0_alias -> 217.5.23.70
default-gw is 10.50.0.1
If you want to connect to e.g. 193.44.25
Joachim Schipper wrote:
> On Fri, Mar 03, 2006 at 01:08:43PM +0100, oliver simon wrote:
>>hi bsd-gurus ...
>>
>>we are currently trying to set up an openbsd host, and have a problem
>>with source-routing mechanisms !?
>>
>>Setup is as following:
>>
>>
Hi Alex,
Alexander Bochmann wrote:
> Hi,
>
> ...on Fri, Mar 03, 2006 at 01:08:43PM +0100, oliver simon wrote:
>
> > hme1 -> 10.50.0.10
> > hme0 -> 217.5.23.69
> > hme0_alias -> 217.5.23.70
> > default-gw is 10.50.0.1
> > If you want to
Hi again .. ;-)
Joachim Schipper wrote:
> On Fri, Mar 03, 2006 at 02:01:22PM +0100, oliver simon wrote:
>>Hi Alex,
>>
>>Alexander Bochmann wrote:
>>>Hi,
>>>
>>>...on Fri, Mar 03, 2006 at 01:08:43PM +0100, oliver simon wrote:
>>>
>>&g
Does not work ...
After putting your lines in pf.conf, it just puts out a syntax error !?
oliver simon wrote:
> Hi again .. ;-)
>
> Joachim Schipper wrote:
>>On Fri, Mar 03, 2006 at 02:01:22PM +0100, oliver simon wrote:
>>>Hi Alex,
>>>
>>>Alexander
teway-IPs) in
the dmz are private...
Any help is appreciated ...
Gereetings, ...olli
Joachim Schipper wrote:
> On Fri, Mar 03, 2006 at 03:03:23PM +0100, oliver simon wrote:
>>Hi again .. ;-)
>>
>>Joachim Schipper wrote:
>>>On Fri, Mar 03, 2006 at 02:01:22PM +0100, oli
anybody have any nice setups of this they'd want to share?
>
> Much obliged, and thanks.
... nice cross-post.
I can recommend reading through this as well:
http://www.bgnett.no/~peter/pf/en/bruteforce.html
--
Oliver PETER, email: [EMAIL PROTECTED], ICQ# 113969174
"If it fee
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2012/11/13 7:14 AM, Mike. wrote:
> If your goal is to please as many people as possible, then
> compromise is the way to go.
>
> If your goal is to produce outstanding software then, well, you're
> gonna have to piss off a few people.
Could not a
On 19 Feb 2013, at 1:40 PM, Rafal Bisingier wrote:
> Hi,
>
> Or you could fix your application, to not do stupid things (like
> generating millions of files in a single directory) in the first
> place... ;-)
+1
>
>
> On 2013-02-19 at 12:10 CET
> Paolo Aglialoro wrote:
>
>> Or you could just
Don't quite know where to post in this thread….
All good in Johannesburg :-p
-Wayn0
On 25 Jun 2013, at 5:10 PM, Alexander Hall wrote:
> Can someone please test from Burundi, Johannesburg and Minsk? Because that
> would probably also be really really really interesting.
>
> Luis Coronado wrot
any to decide which way will be more suitable for
my new installations.
Many thanks. Oliver
Just wanted to update one of my servers (6.1-stable) with erata 30
xrstor
# signify -Vep /etc/signify/openbsd-61-base.pub -x 030_xrstor.patch.sig
\
-m - | (cd /usr/src && patch -p0)
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--
sorry for my previous markdown formatted mail:
I entered the commands correctly:
...
# KK=`sysctl -n kern.osversion | cut -d# -f1`
# cd /usr/src/sys/arch/`machine`/compile/$KK
# make obj
# make config
make: don't know how to make config
Stop in /usr/src/sys/arch/amd64/compile/GENERIC.MP
...
after hours.
Happened a few times during an active ssh session (cvs up or compiling
stable-kernel) or even it hanged somewhen during a day/for days I
noticed later -> no log entries or dmesg gives a hint to any direction
then.
-oliver
Just to add a 4th situation of hangs: Login via proxmox (pve)/kvm serial
console (via noVNC), login successful: Vm guest in pve hangs, cpu usage
at above 102%. Only way is to hard stop the Vm guest. -oliver
On 7 Oct 2017, at 22:01, Mike Larkin wrote:
On Sat, Oct 07, 2017 at 02:19:58PM +0200, Oliver Marugg wrote:
Just to add a 4th situation of hangs: Login via proxmox (pve)/kvm
serial
console (via noVNC), login successful: Vm guest in pve hangs, cpu
usage at
above 102%. Only way is to hard stop
On 8 Oct 2017, at 23:59, Oliver Marugg wrote:
Thanks Mike, will do so. The proxmox guys have also the idea that it
could be a bug in kvm hypervisor (which is the hypervisor part for
proxmox) and will affect OpenBSD since 4.9, they wrote me in their
public forum. As far as I understood they
On 13 Oct 2017, at 0:11, Mike Larkin wrote:
On Thu, Oct 12, 2017 at 10:36:42PM +0200, Michał Koc wrote:
On Thu, Oct 12, 2017 at 01:23:36PM +0200, Michał Koc wrote:
On Sun, Oct 08, 2017 at 11:59:52PM +0200, Oliver Marugg wrote:
On 7 Oct 2017, at 22:01, Mike Larkin wrote:
On Sat, Oct 07
enBSD team. Does anyone have a suggestion as to what’s
happening?
Thanks,
Oliver.
and the security is in netbsd:
http://netbsd.gw.com/cgi-bin/man-cgi?security+8+NetBSD-5.0
http://www.netbsd.org/~elad/recent/recent06.pdf
On 6/19/09, Ivan Voras wrote:
> Kim Attree wrote:
>
>> NetBSD runs on just about anything. That's it's primary goal. Since I
>> don't
>> have any weird hard
gt; there are just minor differences?
If the difference between release and snapshot is too confusing for
you, you should probably just stay with release. If you need releases
on time you should order a CD set next time.
Any please don't try to install a current 5.6 snapshot and use
On Thu, Dec 11, 2014 at 11:59:55AM +0100, FRIGN wrote:
> Btw, now that the topic has come up. Is there a way to view the
> diffs quickly on a source- or port-change?
Not official and not instantly updated:
http://anoncvs.estpak.ee/cgi-bin/cgit/openbsd-ports/log/
--
Oliver PETER
On 21 Nov 2013, at 21:04, Gilles Chehade wrote:
> On Thu, Nov 21, 2013 at 08:02:06PM +0100, za...@gmx.com wrote:
>> Different people have different concepts of morality. I believe it
>> would be better to remove anything that is controversial, for
>> whatever reason -- even if in *my* concept of
On 13 Feb 2014, at 3:54, Michael Vetter
wrote:
> Hello,
>
> I haven't tried out OpenBSD yet, but used Linux for some years.
>
> Recently I got a Macbook, thought first about installing Linux on it,
> but because of different reasons I am considering OpenBSD now.
>
> Does anybody have any experien
ndle
-http://www.geektools.com/rfc/rfc1918.txt";>RFC 1918
+http://tools.ietf.org/html/rfc1918";>RFC 1918
addresses that just shouldn't be floating around the Internet,
and when they are, are usually trying to cause trouble:
--
Oliver PETER oli...@gfuzz.de 0x456D688F
something obvious here. Needless
> >>to say i cant compile and read source but still i try to be attentive to
> >>your answer! :)
> >>
> >>
> >
> >You're going to need some things like
> >
> >(cflags/cxxflags)
> >-nostdinc -I/usr/loc
same error. Any ideas, what I could do?
Thanks oliver
---
FTP:
# ftp https://ftp.openbsd.org/pub/OpenBSD/$(uname -r)/ports.tar.gz
Trying 129.128.5.191...
Requesting https://ftp.openbsd.org/pub/OpenBSD/6.0/ports.tar.gz
ftp: SSL read error: handshake failed: error:14090086:SSL
Superb, many thanks.
On 28 Nov 2016, at 22:02, Janne Johansson wrote:
> Fix the clock so its not 7th of March?
>
>
> 2016-11-28 21:55 GMT+01:00 Oliver Marugg :
>
>> Hi
>>
>> I did a complete new install of OpenBSD 6.0-current today.
>>
>> After fi
I use Proxmox for VMs, it is KVM based with possibility for LXC.
OpenBSD, BSDs in general works as proxmox vms. I use it mainly for
education purposes.
On 8 Mar 2017, at 16:07, Markus Rosjat wrote:
Hi there,
just like to get opinions or examples of OpenBSd as guest on a
hypervisor. I had it
core shown. Switched back to bsd, that works.
-oliver
-- dmesg
OpenBSD 6.1-beta (GENERIC) #0: Tue Mar 14 21:24:42 UTC 2017
visa@octeon:/usr/src/sys/arch/octeon/compile/GENERIC
real mem = 536870912 (512MB)
avail mem = 524238848 (499MB)
warning: no entropy supplied by boot loader
mainbus0
On 18 Mar 2017, at 11:43, Visa Hankala wrote:
On Fri, Mar 17, 2017 at 10:16:59PM +0100, Oliver Marugg wrote:
Understood about ksyms.
3. I set coremask=0x3 to boot mp, in dmseg only 1 cpu is shown, but
its
Are you sure you tried the correct kernel?
Octeon ubnt_e100# bootoctlinux rootdev
On 18 Mar 2017, at 17:09, Visa Hankala wrote:
>> Does my Edgerouter Lite have two cores? ;-)
>
> It does because the firmware lets you use coremask=0x3. If there was
> only one core, the system should refuse to boot the kernel with
> that parameter.
>
> Note that U-Boot loads the kernel from a sep
Hi Ingo
Many thanks for your inputs concerning older, but interesting tools
g/t-roff and refer(1). I didnt know them before.
-oliver
On 3 Nov 2019, at 16:41, Ingo Schwarze wrote:
Hello,
Xianwen Chen wrote on Sun, Nov 03, 2019 at 04:16:43PM +0100:
I am interested in giving _groff_ and
(eg. sofraid(4), bio(4),bioctl(4) OS 2x on 2x ssd raid1,
data 3xssd raid5 or 1x single ssd for OS and 4x ssd raid5/10 or better
ideas)?
many thanks
-oliver
Hi Stuart, hi Nick
Many thanks for your answers adn itnersting point you’ve mentioned
about the raid levels, it really helped me thinking about the ssd config
of that existent server.
Greets Oliver
On 21 Feb 2020, at 17:15, Stuart Henderson wrote:
On 2020-02-21, Nick Holland wrote:
On
On 2020/03/10 21:09, Justin Muir wrote:
Just wishing to give alacritty a go so I git'd the source and did a cargo
build.
I get this error after a while:
LLVM ERROR: out of memory
error: Could not compile `alacritty`
I tried increasing the dataset-cur and -max to 4000M in login.conf, didn't
see
On 2020/03/11 21:26, Luke A. Call wrote:
On 03-11 16:51, Wayn0 wrote:
On Wed, 11 Mar 2020 at 06:21, Wayne Oliver wrote:
On 2020/03/10 21:09, Justin Muir wrote:
Just wishing to give alacritty a go so I git'd the source and did a
cargo
build.
I get this error after a while:
LLVM ERROR
On 2020/03/16 12:26, Flipchan wrote:
Hey all,
My company needs to put up a cdn for fast hosting of javascript, images and css
for websites, and then i would need something faster then httpd.
Does anyone here run a cdn for static website content?
If so what software did u use to set it up ?
project and devs work, will others follow?
-Oliver
efficient;-). But APU2 and NUC is not what I want.
The HPE Gen10 MicroServer (but BIOS only with contract or under
warranty) could be as a possible solution (does anyone using it with
OpenBSD?).
Are there any other suggestions/ideas from your side?
Many thanks.
-oliver
On 14 Dec 2017, at 20:24, gro...@grompf.net wrote:
Bonjour,
For my own personal purpose, i'm using coolermaster 110, 120, 130
cases
with some asrock low cost and low power mini-itx boards.All other
parts
are common ones. It's not the «best & most power full setup» but
it's
silent and my sma
On 14 Dec 2017, at 20:40, Peter N. M. Hansteen wrote:
On Thu, Dec 14, 2017 at 07:23:51PM +0100, Oliver Marugg wrote:
The HPE Gen10 MicroServer (but BIOS only with contract or under
warranty)
could be as a possible solution (does anyone using it with OpenBSD?).
The Gen8 works fine once you
On 15 Dec 2017, at 9:11, Noth wrote:
On 14/12/17 20:40, Peter N. M. Hansteen wrote:
On Thu, Dec 14, 2017 at 07:23:51PM +0100, Oliver Marugg wrote:
The HPE Gen10 MicroServer (but BIOS only with contract or under
warranty)
could be as a possible solution (does anyone using it with
OpenBSD
On 15 Dec 2017, at 10:24, Alex Waite wrote:
I am considering buying a not so expensive home server.
[snip]
This might be a bit above "not so expensive" (~1,200), but I've been
running this at home for just under a year and have been very pleased:
http://www.supermicro.com/products/system/midto
after typing the commands. If I add the
tweak manually to sysctl.conf(5) -> it works. Any ideas or hints for me,
what to check/verify?
dmesg below, thank you devs for OpenBSD.
-oliver
OpenBSD 6.2 (GENERIC.MP) #134: Tue Oct 3 21:22:29 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/ar
On 27 Dec 2017, at 21:30, Theo de Raadt wrote:
>> By entering as su/doas sysctl kern.bufcachepercent=80 shows me the
>> change from default=20 to 80 as expected, but after a reboot the value
>> is set again/still to 20 (%).
>
> sysctl changes the running state. It does not change that file
> for
Hi
In general an community driven openbsd wiki would be a good idea, for
users like me (not developers). I would participate as far I am able to.
But do not forget the OpenBSD FAQ and man pages are really well
documented (thanks devs).
-oliver
On 4 Jan 2018, at 15:17, Andreas Thulin wrote
hi
check: which device does nat for you. On that device configure
portforwarding from external to internal, eg external ip:port to your
internal host:port. test it from outside.
ip forwarding on your OpenBSD laptop isnt necessary here, your laptop
doesnt act as a router in your homesetup.
On 17 Mar 2018, at 4:59, Rodney Polkinghorne wrote:
Hi
This is my first post here, I appreciate how much work you all do,
please
be gentle. :-)
Could someone please tell me how to install the latest snapshot, or
point
me at some instructions that work? I tried the following:
1. Download
On 03/04/2018 17:11, Marko Cupać wrote:
> Hi,
>
> before I get to the question, I'd like to thank all the people who made
> 6.3 happen. Keep up the good work! :)
>
> I noticed that on 6.3 prompt shows hostname($|#) by default. Up until
> now I was setting it by exporting PS1 in .profile:
>
> PS1
On Thu, May 10, 2018 at 9:36 AM, Stuart Henderson
wrote:
On 2018-05-10, Patrick Dohman wrote:
Incidentally why are there no African mirrors aka Kenya etc?
Nobody has offered one; a significant amount of traffic would be used
just keeping it up to date with snapshots, so it would only make
se
Hi
Did you enable VT/Extendend Mem64 Technology and Excute Disable Bit
support in BIOS?
-oliver
Hi
Did the test on my ERLs also: I upgraded to ubnts rel 1.10.7 and
installed new firmware image via CLI.
USB Stick Rebooted for installing OpenBSD snapshot in uboot:
---
reset
usb reset
fatload usb 0 $loadaddr bsd.rd
bootoctlinux rootdev=sd0 numcores=2
--
Installing octeon current snapshot of
1 - 100 of 165 matches
Mail list logo
