/msx%20sex%20controller%20mega%20bul
let%20gold.asp
Greetings from Erik Maas
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
it. At least, when I receive the specs
from someone...
Greetings from Erik Maas
- Original Message -
From: Adriano Camargo Rodrigues da Cunha [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, June 30, 2000 3:16 AM
Subject: Re: games
Ah, yes, nice... But I think my RS-232 isnĀ“t very
products is done by an
external
company.
Greetings from Erik Maas
p.s. A good colleague has worked on the MSX card for the PC, and just
trown it away one or two years before I started to work there at Philips.
- Original Message -
From: Hans Otten [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent
it, you could use it.
But I do not think it will work this way!
Greetings from Erik Maas
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not the subject) of the message.
Problems? cont
The Elektuur version is not made to the MSX standard.
By the way, more MSX developments that were published by Elektuur
suffered from serious problems. There is a signal on the MSX cartridge
connector that is called BUSDIR. On some computers this is not a problem.
This signal controls the databus
, I personally like PDF a lot better than postscript. Postscript always
leads me into
problems when I generated it on a unix system and I want to use it on a MS
system...
Greetings from Erik Maas
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscrib
it should not be difficult.
Greetings from Erik Maas
-Original Message-
From: Manuel Soler [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: maandag 14 februari 2000 10:37
Subject: 720 to 360 floppy drive doubt
Hi, I would like to ask...
Is there any possible way to use a 360kbs
are only possible with a turbo-R in this way.
But if you install the driver (DRIVER.COM, shipped with RS232C interface)
you can
use the Hitech-C extensions you have made a long time ago...
(It was foslib or something like that)
Greetings from Erik Maas
MSX Mailinglist. To unsubscribe
sometime. But since I do not have much time, it could be this
project
will never start at all...
Greetings from Erik Maas
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not t
thought I released some command line utils as well
And some info about how to tell the TSR to load the music data and sample
kit.
Yes, I know, it should be better...
* It has no MoonSound support
* It does not work like a DOS2 TSR (needs MemMan)
Greetings from Erik Maas
MSX Mailinglist
Hallo Manuel,
Mijn e-mail adres zou ik nog doorgeven geloof ik.
Dus: [EMAIL PROTECTED]
Of: [EMAIL PROTECTED]
Groeten, Erik Maas
-Original Message-
From: Manuel Bilderbeek [EMAIL PROTECTED]
Newsgroups: comp.sys.msx
Cc: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Monday, September 20
I'm sorry, replied to the wrong address...
Sorry...
Greetings from Erik Maas
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL
because of the slot-switching, but because of the
access time
too!
Greetings from Erik Maas
p.s. I don't know what kind of program is under development, but I hope the
mapper
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscrib
Sorry, but it seems I have used the wrong reply adress...
Greetings from Erik Maas
Vergat ik te vragen.
Kan ik van jou die databladen van de WD2793 krijgen ?
Tuurlijk...
Ik zal ze inscannen en omzetten naar PDF, ik heb acrobat editor 3.01,
dus dat moet wel lukken. Ik ben toch van plan om
is not allowed.
But what I try to tell with this nonsense is that the capabilities of a
RS232C interface
are not only limited by the software. The hardware is one of the biggest
problems.
Greetings from Erik Maas
p.s. If I have time, I could finish the V9938 colour ANSI version, it was at
a reasonable
homepage or send it using
E-Mail.
I tried to learn how to make music, and therefore I have written
this program. Just to be able to use a MIDI sequencer. I was
able to use the AWE 32 in my PC to play the data that came
from my MSX.
Greetings from Erik Maas
(I have also used it together
registers
these
signals are located?
Greeting, Erik Maas
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
.
Greetings from Erik Maas
-Original Message-
From: [EMAIL PROTECTED] [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Cc: Walter Bernardo Nunes [EMAIL PROTECTED]
Date: vrijdag 19 maart 1999 6:16
Subject: RE: FDC x 1.44Mb
Marco Antonio Simon dal Poz [EMAIL PROTECTED] wrote:
Maarten
p counting at 12 and
continue counting with 14
But I don't think this counting should be standarized or so, it's not that
important.
Some programs are better implemented when counting starts at 0, and some
like to start with 1.
Please, end this discussion;-)
Greetings from Erik Maas
p
What was the subject that resulted into these Flash memory
topics???
Greetings from Erik Maas
p.s. At the time I only know one released project that uses normal Flash
memory (29F???)
and that's an IDE interface from Sunrise Swiss. Very nice for a software
updates...
At the time it was released, the soft
"HAD" a SMD 33C93A on a PCB, but I have trown it away a week ago. I will
see
if it is still there. (probably not)
Greetings from Erik Maas
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTE
cartridge with
Flash memory. I programmed this cartridge with an adapter I made on my MSX)
Greetings from Erik Maas
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Prob
Hey, that's fantastic, ZMODEM download!!
You're great!!
Can it also be used with the RS232-interface Erik Maas produced?!
U...
I don't know how is this interface. Do you know what UART has it, and the
port addresses?
It has a 16550 UART at h80-h87
It should be compatible with the ACCNET
with the MSX standard.
What I was trying to say is that the Philips RS232C interfaces don't comply
to this standard either...
Greetings from Erik Maas
begin 600 WINMAIL.DAT
M)\^(BX'`0:0" `$```!``$``00!@`(Y 0```#H``$(@ `
M ```$E032Y-:6-R;W-O9G0@36%I;"Y.;W1E`#$(`0V ! `"``
... It sure wasn't for free...
A friend of mine has also a SCSI -- MFM conversion PCB. Just SCSI-1,
but nice to have these very old harddisks to work...
(slow, came from an old 68k based mainframe)
Greetings from Erik Maas
--
From: [EMAIL PROTECTED]
Sent: Friday, July 10, 1998 9:41 AM
If you read the Zilog homepage in the Z380 section, the Z380 is still in the list
of products.
see http://www.zilog.com/frames/fz80_180micro.html
Greetings from Erik Maas
--
From: Antoni Burguera
Sent: Thursday, June 25, 1998 12:11 AM
To: [EMAIL PROTECTED]
Subject:RE
work at 40 Mhz. This does not say that the clock is or is not divided with four in the
R800.
Who is able to check this?
Greetings from Erik Maas
--
From: Manuel Bilderbeek
Sent: Friday, June 19, 1998 3:21 PM
To: [EMAIL PROTECTED]
Subject:Re: Turbo R?
On Thu, 18 Jun
. (Software that is monitor/TV dependant Who want's that?)
Greetings from Erik Maas
--
From: Laurens Holst
Sent: Tuesday, June 23, 1998 4:18 PM
To: [EMAIL PROTECTED]
Subject:Re: Color Burst (was: A question about the PSG samples)
-Oorspronkelijk bericht-
Van
because in series with the datalines
from the processor(s) to the cartridge connectors there are resistors.
(I think they are 100 ohm)
The engine doesn't have these resistors in it's way to the processor(s).
Greetings from Erik Maas
--
From: Egor Voznessenski
Sent: Tuesday, May 26
/\/\
(Translation: P.s. sorry I am so negative)
Are you?
I thought we all were friendly. Guess not...
It could be you want to fight someone else I know in this way,
but please don't do it like this.
Greetings, Erik Maas
p.s.1. If anyone feels that I am disposing garbage in the mailinglist,
let me
, Green, Blue).
They are all five bits wide.
You can select from 32768 colors.
Greetings from Erik Maas
begin 600 WINMAIL.DAT
M)\^(@`0:0" `$```!``$``00!@`(Y 0```#H``$(@ `
M ```$E032Y-:6-R;W-O9G0@36%I;"Y.;W1E`#$(`0V ! `"`@`"``$$
MD 8`^ $,`P``, (+``
Hmmm... It seems I have sent the previous message to the wrong address...
It was in Dutch and ment only for Stephan Szarafinski.
Sorry about that...
Greetings, Erik Maas
application/ms-tnef
kages I like because
it's one of the best and simple to use package. Allthough it's from
Microsoft.
Greetings from Erik Maas
application/ms-tnef
E-Mail en op het werk. Maar bij mij gaan er genoeg
weekenden voorbij dat ik mijn mail niet lees. Op het werkt ben ik wel de hele
tijd berijkbaar. Er verschijn een enveloppe rechtsonder als er mail
binnenkomt.
Groeten, Erik Maas
p.s. Nog toevallig IETS gedaan aan je MSX Ik weinig, alleen maar
high is
this configuration.
BUT, I don't know for sure of this problem exists with 256 kbyte.
Someone could check this.
Greetings from Erik Maas
--
From: Maarten ter Huurne
Sent: Wednesday, May 27, 1998 1:34 PM
To: [EMAIL PROTECTED]
Subject:RE: Looking for Ram (turbo-R
to be that
the origin of this problem is the one that's mentioned several times on this list.
Greetings from Erik Maas
--
From: Egor Voznessenski
Sent: Wednesday, May 27, 1998 2:27 PM
To: [EMAIL PROTECTED]
Subject:Re: Looking for Ram (turbo-R with S1990)
Now to the point with an external
36 matches
Mail list logo