Running mdk 10.1
sound card is a pci soundblaster sblive 5.1
already ran the hardrake tool for the
sound card.
all info (that I know of) is provided
below, if need more please ask.
Linux localhost 2.6.8.1-12mdk #1 Fri Oct 1 12:53:41
CEST 2004 i686 AMD Athlon(tm) XP 2000+ unknown
GNU/Linux
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 14 Jan 2005 13:09:55 +, Dick Gevers wrote about Re: [newbie]
Anyone using KDar:
On Fri, 14 Jan 2005 12:31:34 +, Anne Wilson wrote about Re: [newbie]
Does it work OK with DVD-RW, Dick?
It should, but I have no way to tell as I have no
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 15 Jan 2005 09:55, Dick Gevers wrote:
On Fri, 14 Jan 2005 13:09:55 +, Dick Gevers wrote about Re: [newbie]
Anyone using KDar:
On Fri, 14 Jan 2005 12:31:34 +, Anne Wilson wrote about Re: [newbie]
Does it work OK with DVD-RW,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, 15 Jan 2005 10:42:39 +, Anne Wilson wrote about Re: [newbie]
Anyone using KDar:
Of course. The only time I tried to use DrakBackup I found that the
problem was the need for space for a huge tar file, which I didn't have.
I guess that
Anne Wilson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 15 Jan 2005 09:55, Dick Gevers wrote:
On Fri, 14 Jan 2005 13:09:55 +, Dick Gevers wrote about Re: [newbie]
Anyone using KDar:
On Fri, 14 Jan 2005 12:31:34 +, Anne Wilson wrote about Re: [newbie]
Does it work OK
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 15 Jan 2005 11:37, Dick Gevers wrote:
On Sat, 15 Jan 2005 10:42:39 +, Anne Wilson wrote about Re: [newbie]
Anyone using KDar:
Of course. The only time I tried to use DrakBackup I found that the
problem was the need for space for
On Saturday 15 January 2005 04:52 am, John Retermeyer wrote:
Running mdk 10.1
sound card is a pci soundblaster sblive 5.1
already ran the hardrake tool for the
sound card.
post contents of /etc/modprobe.conf
Anne, you have this card, don't you?
--
/g
Op vrijdag 14 januari 2005 16:21, schreef Derek Jennings:
Check your MandrakeControLCentreSystemServices to see which is running
and try enabling the other instead.
So I did.
The only change I saw is that my mouse stopped working...)-:
Using the older mm kernel; I don't have a unlimited
Is there a way to have a specific web site open in Konqueror whenever it
starts, using KDE (GUI) only?
My broadband ISP, Road Runner, is a cable operation. The following site,
http://www.rr.com/flash/;, is its home page and can be set by me to reflect
the exact local news, local weather, and
On Saturday 15 January 2005 02:23 pm, Andy Yankovich wrote:
Is there a way to have a specific web site open in Konqueror whenever it
starts, using KDE (GUI) only?
My broadband ISP, Road Runner, is a cable operation. The following site,
http://www.rr.com/flash/;, is its home page and can be
On Sat, 15 Jan 2005 09:47:00 -0600
Dennis Myers [EMAIL PROTECTED] wrote:
On Saturday 15 January 2005 02:23 pm, Andy Yankovich wrote:
Is there a way to have a specific web site open in Konqueror
whenever it starts, using KDE (GUI) only?
My broadband ISP, Road Runner, is a cable operation.
On Saturday 15 January 2005 21:23, Andy Yankovich wrote:
snip
Also, the Road Runner start page using Windows has better fonts
than when using Konqueror. I am not certain but I think the fonts
in RR start page using Windows is Sans while the font when using
Mandrake KDE is definitely different
On Saturday 15 Jan 2005 15:47, Dennis Myers wrote:
you can go into settingsconfigure Konquerorbehaviorand put in the URL
of the home page you want where it has URL and a blank for fill in. HTH
I've done that but when I open Konqueror it always opens up
file:/usr/share/doc/HTML/index.html of
Hi Folks
I use Kontact for all my email at the moment, but some of the mailing lists I
am on I would like to keep the messages of rather than finding the
information on the web again.
What I want is a way to access the mail without the use of Kontact, do you see
what I mean??
Cheers, Elwyn
When I start 10.1 I get the message you may replace bluez's pin helper
program with kbluepin; it is located in /user/lib/kdebluetooth now.
How EXACTLY do I do this?
What did it do and what will it do after the change?
Sorry if these questions are so basic. Maybe I do not belong in the Linux or
I did what Dennis suggested and it did not work. My result was a bit
different from Elwyn's (below). I just go to the page titled
congratulations for choosing Mandrakelinux!- Konqueror.
Has anyone been successful using Björn Olsson's method?
Thanks for all your suggestions, Andy
Elwyn wrote:
Yesterday I decided to try and install 10.1 on a Dell C840 laptop that's on my
desk, connected via a KVM. The install went well (much better than 10.0 as
it actually installed in the dock and sees the Ethernet card), but an old
behaviour came back with the install - the mouse freaks and
mike wrote:
Anne Wilson wrote:
snip
Mike - how about a board entry on the TWiki
HardwareCompatibility page?
http://mandrake.vmlinuz.ca/bin/view/Main/MotherBoards
Anne
Done.
Mike
Want to buy your Pack or Services from MandrakeSoft?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 15 Jan 2005 18:01, mike wrote:
mike wrote:
Anne Wilson wrote:
snip
Mike - how about a board entry on the TWiki
HardwareCompatibility page?
http://mandrake.vmlinuz.ca/bin/view/Main/MotherBoards
Anne
Done.
Mike
Thanks, Mike
Well, Dennis, the instructions you gave DID work, but for only one time.
After a complete shut down, I attempted something I never did before. At the
KDE 3.2 flash screen, I clicked on the globe icon and went directly to the
start page I have been trying to get.
However, I tried to recreate that
On Saturday 15 January 2005 06:34 pm, Andy Yankovich wrote:
Well, Dennis, the instructions you gave DID work, but for only one time.
After a complete shut down, I attempted something I never did before. At
the KDE 3.2 flash screen, I clicked on the globe icon and went directly to
the start
On Saturday 15 January 2005 10:47 am, Russ Kepler wrote:
The normal 'trick' is to force the psmouse module to use one simple config
for the mouse, but with the new kernel the old psmouse module is not
present. Anyone know why the psmouse module is missing?
Answered my own question by looking
On Saturday 15 Jan 2005 10:08 pm, Andy Yankovich wrote:
When I start 10.1 I get the message you may replace bluez's pin
helper program with kbluepin; it is located in /user/lib/kdebluetooth
now.
How EXACTLY do I do this?
What did it do and what will it do after the change?
It's bluetooth,
The guide-blender package installed by urpmi is in french. I've also checked
here http://rpm.pbone.net/index.php3/stat/21/year/2004/month/04/day/22 and it
seems that they are all french here too. Is there an english version?
Sorry, but I dont know which source urpmi installed from. It was
What does the label say on those CDs?
If they are 10.1 Community Edition it may be worth upgrading. Since I am
still using 9.2 I'll let others tell you how worthwhile it is.
Be very careful upgrading from 9.X to 10.x. There is some hardware that 9.X
will configure and 10.X will into spasms
On Sat, 2005-01-15 at 17:08 -0500, Andy Yankovich wrote:
I did what Dennis suggested and it did not work. My result was a bit
different from Elwyn's (below). I just go to the page titled
congratulations for choosing Mandrakelinux!- Konqueror.
Has anyone been successful using Björn Olsson's
On Saturday 15 Jan 2005 22:43, Lorin Pino wrote:
On Sat, 2005-01-15 at 16:24 +, Elwyn wrote:
Hi Folks
I use Kontact for all my email at the moment, but some of the mailing
lists I am on I would like to keep the messages of rather than finding
the information on the web again.
Looking for a program that can show a meter on the screen about the throughput
of the network card selected (ie eth0)
On Windows I have the use of a program called DU Meter but I can't find
anything for Mandrake (10)
Cheers
Elwyn
Want to
Elwyn ([EMAIL PROTECTED]) wrote:
Looking for a program that can show a meter on the screen about the
throughput
of the network card selected (ie eth0)
On Windows I have the use of a program called DU Meter but I can't find
anything for Mandrake (10)
Cheers
Elwyn
Try gkrellm .. you
I have a problem with decrypting my sent messages.
Been expermenting with gnupg. When I send a signed and encrypted
message to someone who has my key they get it and can read it fine
and I have their key and can decrypt an encrypted message from them.
But when I go to my *Sent* box click on a
30 matches
Mail list logo