ciao
io posseggo la mandrake7.2 e mi capita sempre un fastidioso problema alla
connessione a internet. Il mio รจ un modem esterno 56k.
Ogni volta che provo a connettermi mi da sempre errore e mi dice che non ho
attivato il debug del pppd mi chiede di attivarlo e al secondo tentativo mi
da un altro
Salve,
Ho installato la Mandrake 7.1 creando alcuni utenti. Ora vorrei
installare StarOffice in modo che sia visibile e utilizzabile da parte
di tutti gli utenti.
Come mi devo comportare? O meglio, ci sono accorgimenti particolari da
seguire? (installazione di rete e poi installazione per ogni
Well, I've seen a lot of "because the other guy is bad" stuff. And I've
seen a lot of "I want my computer more stable" stuff. But neither of
those really address the reasons I've been fooling with Linux for years.
And none of my reasons may be meaningful to you. The context in which I
run Linux
Hello s,
Thursday, December 28, 2000, 10:55:51 AM, you wrote:
s On Thursday 14 December 2000 12:16 am, you wrote:
Hellos,
Wednesday, December 27, 2000, 5:31:59 PM, you wrote:
s Great thanks. That did the trick. Now if I could get the agpgart
moduled to s load so I could install the
On Sat, 30 Dec 2000, Herman Christiani wrote:
David and Alicia
Would mandrake run on a p60, 540 mb hd, ?
Hi,
Not likely, Mandrake needs a Pentium to run well,
you are better off with something like Red Hat 5.2 for this machine.
Hello Herman,
P60 stands for Pentium 60. So it would work.
On Fri, 29 Dec 2000, Jon Doe wrote:
I am using Mandrake 7.1 and was wondering if I can install the kernel that
comes with 7.2 ie: 2.2.17-21.mdk.rpm ? Or is this kernel specifically for 7.2?
Yes, you can upgrade the kernel with no problem.
Also, I was wondering what kernel rpms do I actaully
On Fri, 29 Dec 2000, SoloCDM wrote:
After trying to print a file as "cat filename | lpr", what caused
the following message to be sent to administration?
lp printer job "stdin": Your printer job (stdin) was not printed
because it was not linked to the original file
lpr filenamewould
Hi all,
Can we make a New Year's resolution to zap this thread. Say no to the
gates gets Linux thread. Let's start a new one. Oh yeah, if you want to
continue, please remove gates before Linux. Please!!
--
Roman
Registered Linux User #179293
I heard rumers. Perhaps microsoft has realised people can use f8 to get to dos
and want to remove that so they can chage $10,000 to send a repair man with a
boot disk over when it goes wrong.
On Thu, 28 Dec 2000, you wrote:
There's an update to Millennium coming out later this year. I think
Winme is unfixable. If you accidently lose the drivers for the video card you
cant fix it from dos. Dos does nothing. You cant reboot in dos, you cant even
get to a dos prompt. I wonder how you pass command line stuff?
On Thu, 28 Dec 2000, you wrote:
On Thursday 28 December 2000 03:06, you
Paul,
When I run that command I get the message:
Command unknown.
Michael Coady
You may want to run lpstat -a and see what printer is set up as the
default printer.
Paul
In other words, nothing will work. Anything that would not work under nt will
nt work under whistler. Then m$ can start chargeing for all sorts of unneeded
patches.
On Thu, 28 Dec 2000, you wrote:
Whistler is no an "update" to Windows ME. It is the complete replacement of
all previous
2001 should be an interesting year.
Roman
root wrote:
Hi Roman,
Have a happy new year. I'm going to. I am playing with kde now trying
trying to upgrade to 2.0.1 and having a ball.
Anthony Daniell (Tony)
Romanator wrote:
Hey Tony,
Have a Happy New Year.
Cheers!
--
On Friday 29 December 2000 07:57 pm, Jody wrote:
Hi Tom,
Wine is prob'ly installed, but not setup. ( locate wine )
I'm newbie-newbie!-) Is that a command to run from somewhere
to find anything with 'wine' in it, you start a terminal and type
'locate wine' (w/o the 's). To find just
I'd
like to know, can somebody put me straight on why we should be optimising our
kernels? what is a kernel?
David and Alicia
-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of john rigbySent: 30 December 2000 02:21To:
[EMAIL
I have LM72 and am having a problem (I think) attempting to install the
package make.
I am using the rpmdrake and select make to install; it runs but does not
leave the list. Go to a terminal and try to use the command only to be told
'make not available'.
Return to rpmdrake and select
On Fri, 29 Dec 2000, Dennis Myers wrote:
only showing 64mg I have added the append = "mem=128" to lilo.conf but
it does not seem to have made a difference to what the control center
Did you remember to run lilo as a command after the change? (You need to
do this as root).
That will fix
I have installed my system to a resolution of 1280x1024 using the
experienced option but the login screen appears to be at very low
resolution. Can I up the resolution of the login screen and how. When I
previously installed using the customised option the login screen
matched the X resolution
Hello,
I have made a set of update RPM's for 7.2 available for KDE 2.1 CVS code. The
RPM's are made from CVS code of 12-29-2000. These RPM's are NOT supported by
MandrakeSoft. Please report bugs in the code to [EMAIL PROTECTED] using the bug
reporting utilities found on Help--Report Bugs in
On Saturday 30 December 2000 04:45 am, Abraham Mandac wrote:
Can someone point me to a gcc tutorial [on the internet or a good
book]? I find the man pages a bit overwhelming as yet.
Thanks,
Abe
go to Google and search 'gcc tutorial', it'll return 35,000 links,
some which might be useful
I have to jump in to this discussion, because I just can't help myself. I
have used windows for as long as it has existed. Started with the DOS boot up
before Windows 3.1 and right on up to 98. I got so tired of the blue screen
and system freezes. I took Norton Antivirus off of our home
Yeah yeah yeah... :) yuck it up. If I get this working though, (not
holding my breath - I might pass out) it would be cool!
Mark
Roger Sherman wrote:
Hey Mark, my email client uses Procmail just fine! ;-) Pine, by the
way...;-p
peace,
Rog
http://www.slammingrooves.com
Registered
Hi,
Is there a way to remotely initiate an upgrade from 7.1 to 7.2. How would
you do it? Using RPMs or
Or second question: Is there a way to verify and upgrade all dependant
rpms. Example Apache Web server.
Tx for all answers
Peter D.
Look at this number sequence:
512k
1m
4m
8m
32m
see how quickly it goes up? They are the memory requirements for windows. dos
would word with 512k. windows 3.11 needed 4 meg. windows 95 needed 8 meg.
Windows 98 needed 32Meg. Whistler will need so much people will have to buy
more.
And look at
using mdk 7.2secure with security @high
just switched to kde after this reinstall and can't seem to figure out
allowing myself as a normal user how to mount removable media (don't
want to use supermount).
for example my floppy entry in fstab is
/dev/fd0 /mnt/floppy auto
On Fri, 29 Dec 2000, you wrote:
ok, here is the real question: why do people try running linux?, the
impression i had gathered was that it was a lighter os and could be used on
older machines, (i386 etc). I was a little dismayed when i saw the download
size. How much disk space will a bare
At 03:03 PM 12/29/00 -0500, you wrote:
Abraham Mandac wrote:
When I was just about getting fed up with how Visual C++ fails to compile
simple bits of code, I read somewhere that the best C compilers run under
unix [and that sort of includes linux, doesn't it?]. I got LM 7.1 more than
2
On Fri, 29 Dec 2000, Barry Premeaux wrote:
Hi Barry,
Netscape (4.76) just locked up on me and I couldn't kill it from
the
command line. I went 'su' and opened gtop. If you highlight the
process you want to kill, you can do a right mouse click, slide
Hmmm... I wonder why I did not think of
Herman Christiani wrote:
Hi All,
Can somebody tell me what is the latest 4.7x version of Netscape?
I'm running 4.73, after trying to find a later version I was told
by Netscape that I was already running the latest version for my
platform (MD 7.1), afaik the latest is 4.76, will this not
Hello
First of all, NO QUESTION IS DUMB, especially in the newbie list ! You
are here to learn... :)
RPM , redhat package management, a sort of automatic installation
system. It contains the files, and info where the files will be put,
and also some scripts, that can manage some
At 30-12-2000 +, you wrote:
I'd like to know, can somebody put me straight on why we should be
optimising our kernels?
what is a kernel?
David and Alicia
From OReilly Running Linux, page 10 : "The kernel is the guts of the
operating system itself; it's the code that controls the
On Wednesday 31 December 1969 06:00 pm, chengkenneth wrote:
How can I make my PCI(internal) 56K modem function in mandrake
7.1?
Most, but not all pci modems are not real modems and won't work with
Linux. Find out your modem's make/model number and check it against
the list here:
Ended up reinstalling because I wanted to use the entire drive for 7.2 and I
hoped it would resolve the cdroms/ls120 configuration problemwhich it
did. Now though, X-CD-ROAST starts up saying "Something on the SCSI-Bus has
changed. Please check your writer and reader configuration in
Abraham Mandac wrote:
Can someone point me to a gcc tutorial [on the internet or a good book]?
I find the man pages a bit overwhelming as yet.
Thanks,
Abe
go to http://www.howstuffworks.com/
on their search engine, type in 'c programming'.
that will lead you to their c tutorial, which
On Saturday 30 December 2000 10:47, you wrote:
The latest edition of O'Reilly's 'Running Linux' is the second edition,
right?
Just want to be absolutely sure before I go out to get it.
Thanks -- Abe
The current latest and greatest edition is the third. I have the second
edition, I
Abraham Mandac wrote:
The latest edition of O'Reilly's 'Running Linux' is the second edition, right?
No Abe, the current edition is "Third", Its bigger an dmore current.
I've almost worn mine out.
--
Jim
James Mellema, CRNA
It's the end of
On Sat, 30 Dec 2000, David and Alicia wrote:
I'd like to know, can somebody put me straight on why we should be
optimising our kernels? what is a kernel?
David and Alicia
Hi David and Alicia,
Let's see. The kernel.
This is the heart of the operating system. It is a file you can find in
the
Abraham Mandac wrote:
Can someone point me to a gcc tutorial [on the internet or a good book]?
I find the man pages a bit overwhelming as yet.
Thanks,
Abe
Hello Abe,
I found a lot of good books through a good web page at:
http:/www.informit.com
They allow you to review portions of the
On Saturday 30 December 2000 02:27 pm, you wrote:
On Fri, 29 Dec 2000, Dennis Myers wrote:
only showing 64mg I have added the append = "mem=128" to lilo.conf
but it does not seem to have made a difference to what the control center
Did you remember to run lilo as a command after the
I just reinstalled 7.2 (actually a couple of times) and now when I boot I'm
getting all of these different entries in the loader. Such as 'oldwindows',
'oldlinux' etc. I have reinstalled before and didn't get all of that. Is
there a way to rewrite the boot record so that it is as it was before
On Saturday 30 December 2000 02:25 pm, David and Alicia wrote:
I'd like to know, can somebody put me straight on why we should be
optimising our kernels? what is a kernel?
What is a 'clarity mark answer'? Please post in plain ASCII text.
It's the number one rule for this and most all
Hey,
I'm wondering about this subject as well. I've a Diamond Viper
770D with 32MB RAM, using the Riva TnT 2[v5] module. Till
yesterday, I was running some "Other" module, but I'd reset the
Riva in drakcomf had also installed the glide files from CD.
Some games are now fine, but others
Ah - good one!!
goldenpi wrote:
I heard rumers. Perhaps microsoft has realised people can use f8 to get to dos
and want to remove that so they can chage $10,000 to send a repair man with a
boot disk over when it goes wrong.
On Thu, 28 Dec 2000, you wrote:
There's an update to
Abraham Mandac wrote:
The latest edition of O'Reilly's 'Running Linux' is the second edition, right?
Just want to be absolutely sure before I go out to get it.
Thanks -- Abe
That's the one I am using. You can always check with O'Reilly's.
--
Roman
Registered Linux User #179293
Hallo!!
I've got a problem. I've reinstalled because of a problem with Corel
Photo Paint 9 and now the system is not shuting down. It stops/shuts
some services and then the following appears:
INIT:no more processes left in this runlevel
And it remains there 8-?
Thanks!!
--
Joan Tur.
Abraham Mandac wrote:
At 03:03 PM 12/29/00 -0500, you wrote:
Abraham Mandac wrote:
When I was just about getting fed up with how Visual C++ fails to compile
simple bits of code, I read somewhere that the best C compilers run under
unix [and that sort of includes linux, doesn't
Hey Riker,
I'm taking my first stab at messing with the Kernel. Such as
recompiling and then I'm going to compile a new kernel. The
problem I'm having now is that the kernel source wasn't
installed during the install. Is there a way to install the
source kernel so I can do things such as
Windows 98 doesn't run on 166Mhz, the install program doesn't allow the
install.
Mark Hillary
- Original Message -
From: "goldenpi" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, December 30, 2000 3:08 PM
Subject: Re: [newbie] gates gets Linux
Look at this number sequence:
I am learning to compile using the NHF on compiling software. I am getting
an error and would like to be able to cut and paste to file or save the
output to file, but there are no options that I can find to do this. As
usual, any help will be appreciated.
Go Broncos, beat the Ravens!!
Jerold
On Sun, 31 Dec 2000, Jeffrey Norris wrote:
Ended up reinstalling because I wanted to use the entire drive for 7.2 and I
hoped it would resolve the cdroms/ls120 configuration problemwhich it
did. Now though, X-CD-ROAST starts up saying "Something on the SCSI-Bus has
changed. Please check your
At 20:25 30/12/2000, you wrote:
I'd like to know, can somebody put me straight on why we should be
optimising our kernels? what is a kernel?
David and Alicia
Assuming this is not a wind-up. The kernel is the "guts" of the operating
systems. This is the software that makes the computer come
I am learning to compile using the NHF on compiling software. I am getting
an error and would like to be able to cut and paste to file or save the
output to file, but there are no options that I can find to do this. As
usual, any help will be appreciated.
Go Broncos, beat the Ravens!!
Jerold
Dear All, I have Linux-Mandrake 7.2 and I had my internal Atapi zip
drive supermounted and it was working fine until recently. As user all
of a sudden I cannot copy a file into my zip. I can take them out and
place them unto my desktop but I cannot place a file into my zip. As
root I can do it
Happy 7th day of Christmas! (7 penguins a swimming?)
The message I sent earlier this morning has not yet appeared, so hear is
some more information on the same problems.
The Linux login works almost to the end. The last entry I can read says
:
Running Linuxconf hooks
Then something about
Hi Tom and Onur,
(Thanks for the tip Onur - sometimes GUI progs are best when just
starting off, but I'm getting the hang of the commandline now and
prefer it - most the time g) Say, can I type ? or help... at
the prompt and get a list of commands?
to find anything with 'wine' in it, you start
test post ignore
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Mark Hillary
Sent: Sunday, December 31, 2000 10:11 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] gates gets Linux
Windows 98 doesn't run on 166Mhz, the install program doesn't allow the
[ please note the change in subject line as per Roman's request! ;-) ]
-Original Message-
From: goldenpi
Sent: Saturday, December 30, 2000 7:01 AM
In other words, nothing will work. Anything that would not work under nt
will
In other words, nothing will work. ...
Lots of things
On Saturday 30 December 2000 15:51, you wrote:
Hallo!!
I've got a scanner and i load it's module whenever i want to use it.
The problem is that i have to scan using xscanimage because under Gimp
the option adquire shows only "screen shot" 8-?
What else do i have to do?
Thanks!!
I
Just wondering, Is there any books on how to optimize and compile the Linux
kernel? if any one knows pls let me know, and also how can I upgrade a kernel
let's say from 2.1 to 2.4 ?
Your replies will be greatly appreciated!
Thank you!
Its also more stable ebcause a small crash in windows will take the system
with it. Under linux the same small crash will take down the application but
will leave everything else untouched. If you accidentially put your program
into an endless loop you can just switch console and kill it.
-
Does anyone know where I can get the latest Kernel (which is 2.4) as RPM?
Hi Paul, David and Alicia,
The answer is yes and no,
the p60 is a pentium, but from the p133 or p166 onwards(not fully sure
about this) they changed the internal architecture of the cpu, also
a p60 is not really more powerfull then let say a 486DX100.
Have a happy New Year, Herman
Paul wrote:
I installed 98 after melting my P200MMX in the laptop. I just wanted to get
it up to 166. It should have worked but I didn't know the core voltage was
too high. I thought it was just a cooling problem and tried to fix it by
stuffing the heatsink with thermal paste. I ended up buying a p166 with
Mark Hillary wrote:
Windows 98 doesn't run on 166Mhz, the install program doesn't allow the
install.
Simply not true. It ran on mine till I erased it in favor of Mandrake
6.0.
Gene
Win95 will run on a 386. I dont know if it will install on a 386 through. I
once had 95 running on a 386 with 8 mi ram. I got the hard drive second hand
with windows on it. Then I just had to put it in and turn on.
- Original Message -
From: Mark Hillary [EMAIL PROTECTED]
To: [EMAIL
Hey Marcia,
Try this line:
/mnt/zip /mnt/zip supermount fs=vfat,dev=/dev/zip 0 0
Dear All, I have Linux-Mandrake 7.2 and I had my internal Atapi
zip drive supermounted and it was working fine until recently.
As user all of a sudden I cannot copy a file into my zip. I can
take them out
Hi,
I was running netscape 4.76.0x on my LM 7.1 system and netscape crashed.
Now when trying to run netscape I get a "segementation fault (core dumped)
message.
I uninstalled the netscape RPMs and installed the 4.76.3x version from
rpmfind.net in the LM dir. Both common and communicator RPMs
Definitely not a wind up question, I'm just new to all of this. Thanks for
your reply Dev
David and Alicia
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Dev Sen
Sent: 31 December 2000 18:45
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Newbie dumb
On Sunday 31 December 2000 01:09 pm, Jody wrote:
This is assuming you leave your computer running
overnight so that cron updates you files. If you don't you might
need to run (as root) 'locate -u' or 'updatedb' (your choice,
they both do the same thing).
It appears you imply that it
On Sun, 31 Dec 2000, Jeffrey Norris wrote:
I just reinstalled 7.2 (actually a couple of times) and now when I boot I'm
getting all of these different entries in the loader. Such as 'oldwindows',
'oldlinux' etc. I have reinstalled before and didn't get all of that. Is
there a way to rewrite the
Does anyone know how to install netsaint ?
i couldn't found the rpm of netsaint in linux mandrake
disc
if someone know please tell me
thanks
__
Do You Yahoo!?
Yahoo! Photos - Share your holiday photos online!
http://photos.yahoo.com/
Hi there,
I am unsing Linux Mandrake 7.2, each time I load, I get the following
messages in /var/log/messages:
modprobe: Can't locate module char-major-4
last message repeated 67 times
PAM_unix[1031]: (system-auth) session opened for user root by (uid=0)
modprobe: Can't locate module
On Sunday 31 December 2000 12:49 pm, Jerold Von Hemel wrote:
I am learning to compile using the NHF on compiling software. I am
getting an error and would like to be able to cut and paste to file
or save the output to file, but there are no options that I can find
to do this. As usual, any
Paul stated the following:
On Fri, 29 Dec 2000, SoloCDM wrote:
After trying to print a file as "cat filename | lpr", what caused
the following message to be sent to administration?
lp printer job "stdin": Your printer job (stdin) was not printed
because it was not linked to the
Ha folks,
I have found the same problem. M72 is far slower than Wdoze to
load. Far slower in operation too.
John
- Original Message -
From: "Revenant" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, December 30, 2000 7:50 PM
Subject: Re: [newbie] basic question
AMDK7-650, HDD
On Sunday 31 December 2000 15:13, you wrote:
Does anyone know where I can get the latest Kernel (which is 2.4) as RPM?
Julio,
You can get this off the Update mirrors. Just use Mandrake Update. I believe
it's part of the developers list.
--
Mark
"If you don't share your concepts and ideals,
DAMN! I even try filtering this stinking thread out and it just won't GO AWAY!
Ok...I know this is going to come as a shock to some, but THIS is a LINUX
forum and NOT a WINDOWS forum. Can we PLEASE discuss our windows
elsewhere? Please??
On Saturday 30 December 2000 10:03, you wrote:
HP
Joan Tur wrote:
Hallo!!
I've got a scanner and i load it's module whenever i want
to use it. The problem is that i have to scan using
xscanimage because under Gimp the option adquire shows only
"screen shot" 8-?
What else do i have to do?
Thanks!!
Joancreate a symlink for
Herman Jalink wrote:
On Saturday 30 December 2000 15:51, you wrote:
Hallo!!
I've got a scanner and i load it's module whenever i want to use it.
The problem is that i have to scan using xscanimage because under Gimp
the option adquire shows only "screen shot" 8-?
What else do i
Hi Jerold,
I am learning to compile using the NHF on compiling software. I
am getting an error and would like to be able to cut and paste to
file or save the output to file, but there are no options that I
can find to do this. As usual, any help will be appreciated.
I'm so new, I'm not sure
there is an rpm in contribs on any mirror site:
Mandrake-devel/contribs/RPMS/netsaint-0.0.6-2mdk.i586.rpm
-Chris
On Sunday 31 December 2000 15:50, you wrote:
Does anyone know how to install netsaint ?
i couldn't found the rpm of netsaint in linux mandrake
disc
if someone know please tell
This problem has surfaced before with other versions of Netscape.
Sorry, but I do not remember what the solution was.
Check the Archive for Newbie and Expert you should be able to find the
posting there.
Charles (-:
Forever never goes beyond tomorrow.
-Original Message-
From:
Hi,
Are you sure that they will accept only *word* as a acceptable
word-processor?
For Linux you can install Corel's WordPerfect8, it's also a popular
wp for windows, hope this helps.
Have a Happy New Year,
Herman
Goldenpi wrote:
I installed 98 after melting my P200MMX in the laptop. I just
Kevin Taylor wrote:
Hi,
I was running netscape 4.76.0x on my LM 7.1 system and netscape crashed.
Now when trying to run netscape I get a "segementation fault (core dumped)
message.
I uninstalled the netscape RPMs and installed the 4.76.3x version from
rpmfind.net in the LM dir. Both
Hello, please disable html emailing, how to do that? Just ask me,
I know how in Netscape.
The kernel in Linux is kind of like the 'command.com' file
in a dos/windows system, it contains the rudimentary
code for a running operating system and also
contains the 'internal commands' such as 'ls'
Mark Hillary wrote:
Windows 98 doesn't run on 166Mhz, the install program doesn't allow the
install.
Mark Hillary
It runs just fine on the P 133 file server on my home network. Well, not
fine its slow and if I run programs on it it crashes, but as a network
backup/file server and storage
Mark Hillary wrote:
Does anyone here know why a background cann't be desplayed on KDM. Also is
there a fix for it. I am useing the KDE that came with the downloaded
version of Mandrake 7.2
Cheers to anyon that can help. And happy new year to you all.
Mark Hillary
Mark,
Right click on
Hey Dennis
Is anyone else noticing that their posts are delayed quit a
long time, like up to 24 hours?
Yeah. Saw last night it took some hours for one. Today, it's
been a little less than that, but still taking a long time.
Meph
--
"I did this 'cause Linux gives me a woody."
What I tell you. It's monster. How do you kill this? What did that
character say in Lost in Space? KILL, something or other, DESTROY!
Do you mean IDAK? Instant Destroyer And Killer
Yes, mine have been, but if it gets rid of the dual posts then I
supposed it's OK.
Is anyone else noticing that their posts are delayed quit a long time,
like
up to 24 hours?
At 11:04 AM 12/31/00 -0500, you wrote:
Abraham Mandac wrote:
Can someone point me to a gcc tutorial [on the internet or a good book]?
I find the man pages a bit overwhelming as yet.
Thanks,
Abe
Hello Abe,
I found a lot of good books through a good web page at:
http:/www.informit.com
I recently hooked a HP 672C to my Linux box. When the printer is hooked
directly to my Linux box it prints ok. When the printer is hooked
directly into my Windows ME box, it prints good. When I hook the
printer into my Linux box and then try to print over the network from my
Windows ME box,
I am having trouble getting LM 7.2 to recognize my USB Logitech MouseMan
Wheel, unless I plug it into the PS/2 port. Has anyone had success getting
their USB mouse recognized? If, please email me.
Thanks,
CTK
Get free email
I think the
GATES GETS LINUX thread needs to diealso.
Vic wrote:
Its dead dead dead dead dead.
--
Registered Linux User:167369
==http://www.KompuKit.com
Kit Goins ICQ# 7110071
[EMAIL PROTECTED]
Hello Meph,
MI Hey,
MI I'm wondering about this subject as well. I've a Diamond Viper
MI 770D with 32MB RAM, using the Riva TnT 2[v5] module. Till
MI yesterday, I was running some "Other" module, but I'd reset the
MI Riva in drakcomf had also installed the glide files from CD.
MI Some
What does netsaint do?
How BIG can you dream?
Award Finder!
Pursue your dreams. We can help. (Go ahead, it's FREE!)
Get paid MORE for being online!
It's FREE and takes only a minute!
Join here: Refer Central
Get free
Can anyone tell me why, even with XF86 ver 4.x, I STILL have to edit my
XF86.config file and invert the 75dpi and 100dpi entries??? Why doesn't
X use the 100 dpi fonts by default? What is the purpose of the default
at 75dpi I'll bet this is one of the biggest pains for the newbies
and the
Re-reading this, I realize my answer was wrong (although the site
pointed to will help). Try editing the Windows C:/Windows/hosts.sam
file.
Put in something like this:
127.0.0.1 localhost.localdomain
192.168.0.2 YourLinuxbox.YourWorkgroup #use the address of your linbox
192.168.0.1
G'Day and Thanks for reading this..
I recently changed over to Mandrake 7.2 from RH6.2 In RH I was
able to change the VGA parameters to allow smaller text on screen for more
easier reading. I used the same parameters under Mandrake. It works for
the first part of the bootup,
On Sunday 31 December 2000 07:42 pm, you wrote:
Hey Dennis
Is anyone else noticing that their posts are delayed quit a
long time, like up to 24 hours?
Yeah. Saw last night it took some hours for one. Today, it's
been a little less than that, but still taking a long time.
Meph
1 - 100 di 110 matches
Mail list logo