Many thanks Erik A. Espinoza for clamav-toaster-0.94.2
Constantin
-
QmailToaster hosted by: VR Hosted http://www.vr.org
-
To unsubscribe, e-mail:
Ooops ! Many thanks Jake !
Constantin
Erik A. Espinoza wrote:
Wasn't me. That was done by none other than Jake Vickers who know has
qmailtoaster.org access.
In addition, he will be hosting this mailing list soon. After the
outage incurred over the weekend, we decided to move it from
Greetings Everyone,
I need help getting my POP3 to work again. My mail server has a public ip
address and was working fine until a couple of days ago... i did not make
any changes on the firewall in place since I run it as well, but when i
telnet to the pop port whether inside lan or from a remote
George wrote:
Hi,
I have qmail toaster running on FC5
Each time I remove a domain using vqadmin the
/var/qmail/control/rcpthosts file gets root owner and 600 permissions
which breaks SMTP with the following error:
21 unable to read controls (#4.3.0)
The only to fix is to manually chmod that
Jake Vickers wrote:
[EMAIL PROTECTED] wrote:
hi
thanks for your reply
i am not an expert on this but here is what i feel
if it was forwarding then it is logical that there will be atleast two
delivered-to address and all information displayed in the headers
Aliases and forwards are
Constantin IOAJA wrote:
Ooops ! Many thanks Jake !
Enjoy!
-
QmailToaster hosted by: VR Hosted http://www.vr.org
-
To unsubscribe, e-mail: [EMAIL
Jake Vickers wrote:
[EMAIL PROTECTED] wrote:
Greetings Everyone,
I need help getting my POP3 to work again. My mail server has a
public ip
address and was working fine until a couple of days ago... i did not
make
any changes on the firewall in place since I run it as well, but when i
telnet
[EMAIL PROTECTED] wrote:
Greetings Everyone,
I need help getting my POP3 to work again. My mail server has a public ip
address and was working fine until a couple of days ago... i did not make
any changes on the firewall in place since I run it as well, but when i
telnet to the pop port whether
Kisakye ALex wrote:
Thanks Jake,
I've adjusted the run file like below and it connected although it
took close to 40 seconds... which is tooo slow for a connection on
LAN... Any ideas on what else i should tweak? here is the run file
#!/bin/sh
PASSPROG=/home/vpopmail/bin/vchkpw
Jake Vickers wrote:
[EMAIL PROTECTED] wrote:
Greetings Everyone,
I need help getting my POP3 to work again. My mail server has a public ip
address and was working fine until a couple of days ago... i did not make
any changes on the firewall in place since I run it as well, but when i
telnet
Kisakye ALex wrote:
Thanks Jake,
I've adjusted the run file like below and it connected although it
took close to 40 seconds... which is tooo slow for a connection on
LAN... Any ideas on what else i should tweak? here is the run file
#!/bin/sh
PASSPROG=/home/vpopmail/bin/vchkpw
See response below; Jake Vickers wrote:
Constantin IOAJA wrote:
Ooops ! Many thanks Jake !
Enjoy!
Yeah!!! Wooh HOO! Go Jake, go Jake!
Now maybe we can do something about the duplicate emails from the list!?!
Kent Busbee
Director of Technology
Northlake Christian School
[EMAIL PROTECTED] wrote:
I forgot to mention, yes I did reboot... the connections are still slow
wether on LAN or remote location...
Have you checked your DNS?
You may also be looking up DNS names for your local IP. There's a wiki
page on it:
Kent Busbee wrote:
Now maybe we can do something about the duplicate emails from the list!?!
Those will go away on the new server - one way or another ;)
-
QmailToaster hosted by: VR Hosted http://www.vr.org
I'm not worried that my clamd is currently 0.94.1 and agree that I can wait
until the next big fix (as mentioned in earlier emails) but should I be
concerned that qtp-ami-up2date and qtp-newmodel doesn't see the clamav
0.94.2 available on the qmailtoaster.com site? I know I could download and
Thomas M. Jaeger wrote:
I'm not worried that my clamd is currently 0.94.1 and agree that I can wait
until the next big fix (as mentioned in earlier emails) but should I be
concerned that qtp-ami-up2date and qtp-newmodel doesn't see the clamav
0.94.2 available on the qmailtoaster.com site? I
[EMAIL PROTECTED] wrote:
I forgot to mention, yes I did reboot... the connections are still slow
wether on LAN or remote location...
Have you checked your DNS?
You may also be looking up DNS names for your local IP. There's a wiki
page on it:
hello. I have a QMT installed on a isp, that value queuelifetime I recommend
putting?
owns 60 domains and 1,000 Mailboxes
See response below; Eric C. Broch wrote:
Hello all,
Edwin Casimero question about the Qmailtoaster's specifications for
serving
10,000 email clients spur my first question.
1. I am setting up a Qmailtoaster for 25 email clients but expect
the
number won't increase to 50 anytime
I am having trouble setting up my toaster to relay for remote clients.
I current setup is Toaster -- Firewall -- Exchange server. All
incoming email uses the Toaster as the mail gateway/filter and exchange
uses the Toaster as the smart host for all outgoing messages. I now
have a requirement for
Hey All,
I just wanted to post this to the list in case anyone else is seeing
this issue. I was not receiving email notifications from facebook,
while other users on my server were. I tracked it down to the CHKUSER
patch not accepting a ~ character in a sender address as valid. Rather
than
Kent Busbee wrote:
See response below; Eric C. Broch wrote:
Hello all,
Edwin Casimero question about the Qmailtoaster's specifications for
serving
10,000 email clients spur my first question.
1. I am setting up a Qmailtoaster for 25 email clients but expect
the
number won't increase to
Ariel wrote:
hello. I have a QMT installed on a isp, that value queuelifetime I
recommend putting?
owns 60 domains and 1,000 Mailboxes
For businesses, I normally use 3-4 hours. This allows for
greylisting/slow delivery, but still gives the sender a bounce message
in the same business
Ariel wrote:
hello. I have a QMT installed on a isp, that value queuelifetime I
recommend putting?
owns 60 domains and 1,000 Mailboxes
My opinion is that the stock toaster's default is too long. I prefer
something in the 2-3 hour range. You might want to go a couple hours
longer though
Josh Hopkins wrote:
When I set the client whether it is outlook, thunderbird, or on mobile
devices it connects and authorizes the users (or looks like it does)
and then I get an error when sending saying 5.1.1 sorry, can't find
valid MX record for sender domain (#5.1.1 - chkuser). When
Josh Hopkins wrote:
I am having trouble setting up my toaster to relay for remote clients.
I current setup is Toaster -- Firewall -- Exchange server. All
incoming email uses the Toaster as the mail gateway/filter and exchange
uses the Toaster as the smart host for all outgoing messages. I
Chris Hillman wrote:
Hey All,
I just wanted to post this to the list in case anyone else is seeing
this issue. I was not receiving email notifications from facebook,
while other users on my server were. I tracked it down to the CHKUSER
patch not accepting a ~ character in a sender address
The domain I am trying to send from is joshopkins.com. The domain that
is local on the toaster is fragrack.net.
From: Jake Vickers [mailto:[EMAIL PROTECTED]
Sent: Monday, December 08, 2008 9:52 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] chkuser 5.1.1 error
Josh
Josh Hopkins wrote:
The domain I am trying to send from is joshopkins.com. The domain
that is local on the toaster is fragrack.net.
*From:* Jake Vickers [mailto:[EMAIL PROTECTED]
*Sent:* Monday, December 08, 2008 9:52 AM
*To:* qmailtoaster-list@qmailtoaster.com
*Subject:* Re:
[EMAIL PROTECTED] /]# dig joshopkins.com mx
; DiG 9.3.4-P1 joshopkins.com mx
;; global options: printcmd
;; Got answer:
;; -HEADER- opcode: QUERY, status: NOERROR, id: 63259
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 5, ADDITIONAL: 6
;; QUESTION SECTION:
;joshopkins.com.
Within the network it works just fine(not using the chkuser for local
addresses in the network). From outside the network it fails. The user
account that I am connecting as to send with is [EMAIL PROTECTED]
Users just need to be able to connect to the server for smtp relay
either to external
Josh Hopkins wrote:
Within the network it works just fine(not using the chkuser for local
addresses in the network). From outside the network it fails. The
user account that I am connecting as to send with is
[EMAIL PROTECTED] Users just need to be able to connect to the
server for smtp
Hi;
I need to run ripmime on either incoming or already delivered email to
detach specific pdf documents (this is for an asterisk related fax
gateway). Currently I run a cron job against MailDir of a domain and am
able to detach required pdf's.
I would prefer to run my script when the mail is
That looks ok to me (fwiw).
I gotta go out for a while, so I'll leave you in Jake's capable hands. ;)
Josh Hopkins wrote:
[EMAIL PROTECTED] /]# dig joshopkins.com mx
; DiG 9.3.4-P1 joshopkins.com mx
;; global options: printcmd
;; Got answer:
;; -HEADER- opcode: QUERY, status: NOERROR, id:
Kyle Quillen wrote:
Hello all,
When I try to run the qtp-clean-spam script it comes back with an
error message that finds argument list is too long. Can anyone point
in a direction as to how to clear this up.
You have too many messages in one folder - you can either break the
messages
George Mogielnicki wrote:
Hi;
I need to run ripmime on either incoming or already delivered email to
detach specific pdf documents (this is for an asterisk related fax
gateway). Currently I run a cron job against MailDir of a domain and am
able to detach required pdf's.
I would prefer to run
Rather than modify the script, just create a temp imap folder...
'temp-spam' or something and move half of the messages there
temporarily. Run the script. After completion move them back and run
again. Hopefully it will complete successfully.
-Chris
From: Kyle Quillen [mailto:[EMAIL
Well there are about 3000 accounts on this server so it is going to be pretty
hard to drill down which folder it is bombing on
thanks
q
From: Chris Hillman [mailto:[EMAIL PROTECTED]
Sent: Mon 12/8/2008 1:49 PM
To: qmailtoaster-list@qmailtoaster.com
Subject:
So my goal is to have mobile and remote users connect to the toaster as
[EMAIL PROTECTED] to send emails. Their actual email address will
be something different. In side of outlook, outlook express, ect.. I
have set them up to use a username ([EMAIL PROTECTED]) and the
password for connecting to
No worries. I'm in no great hurry. I have a working ClamAv and that is
what matters. Still I am greatful for all you do! Thank you, thank you,
thank you!
-Original Message-
From: Jake Vickers [mailto:[EMAIL PROTECTED]
Sent: Monday, December 08, 2008 10:39 AM
To:
I have setup a .qmail for one user with this content
|/var/qmail/bin/preline /usr/bin/maildrop -A 'Content-Filter:
maildrop-toaster' /etc/mail/mailfilter
Nothing happens, there is no log in /var/log/maildrop. I have also
followed the FAQ in http://wiki.qmailtoaster.com/index.php/FAQs to get the
That script really should be fixed. In the meantime, this should work:
(substitute mydomain appropriately)
for maildir in `ls -d /home/vpopmail/domains/mydomain/*/Maildir`; do
shopt -s extglob
for spamfile in `find $maildir/+(cur|new)/* 2/dev/null`; do
sudo -u vpopmail -H sa-learn
Kyle Quillen wrote:
Hello all,
When I try to run the qtp-clean-spam script it comes back with an error
message that finds argument list is too long. Can anyone point in a
direction as to how to clear this up.
Thanks
Q
Does the error tell which line in the script gets the error?
Kyle Quillen wrote:
Hello all,
When I try to run the qtp-clean-spam script it comes back with an error
message that finds argument list is too long. Can anyone point in a
direction as to how to clear this up.
Thanks
Q
Does the error tell which line in the script gets the error?
Which
Kyle Quillen wrote:
Kyle Quillen wrote:
Hello all,
When I try to run the qtp-clean-spam script it comes back with an error
message that finds argument list is too long. Can anyone point in a
direction as to how to clear this up.
Thanks
Q
Does the error tell which line in the script gets
I was having similar issues with the roundcube mail installed with
qtp-newmodel. I grabbed the latest version from the official site and it is
working great. I had to edit the domain in the config file to the hostname I
used on the web server to be able to log in successfully.
Hope this helps,
46 matches
Mail list logo
