[Repeater-Builder] Re: Morse Code Contest on JAY LENO

I captured it, but it is 150Mbyte! Sorry but I don't have any fancy video authoring tools and figured if someone down the road needed it smaller, they could redo it in lower resolution or quality. If someone has the space for a large file like that, let me know. Please don't ask me to email this

[Repeater-Builder] Re: Fwd: Motorola ID?

--- In Repeater-Builder@yahoogroups.com, Budd Turner <[EMAIL PROTECTED]> wrote: ID this Motorola #? C73RXB _ C73RXB = 100 Watt Securenet [DVP] Base/Repeater station Manual #: 68-81036E40 Conversion of the VHF Micor to 200 is on the Repeater Builder pages @: http://w

Re: [Repeater-Builder] Re: CW vs. TXT messaging

Should be no problem with that. It was in the contest segment. Mike Morris wrote: >Where was it in the show? After the monologue? >Half way through? At the end? > >i.e. can I get it with a 1 hour 3/4" tape or do I need >a 2 hour VHS ? > >Mike WA6ILQ > > >At 09:00 PM 5/13/05, you wrote: > > >

[Repeater-Builder] GMail

I have 49 invites for Gmail accounts avalible first come, first serve by responding to this downlink. Gmail now offers approx 2200MB of storage, and has beauiful spam blocking capabilities. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repe

Re: [Repeater-Builder] Re: CW vs. TXT messaging

Immediately after the first commercial break in the segment called 'dinner for four' or something like that. Joe M. Mike Morris wrote: > > Where was it in the show? After the monologue? > Half way through? At the end? > > i.e. can I get it with a 1 hour 3/4" tape or do I need > a 2 hour VHS ?

Re: [Repeater-Builder] Re: CW vs. TXT messaging

Where was it in the show? After the monologue? Half way through? At the end? i.e. can I get it with a 1 hour 3/4" tape or do I need a 2 hour VHS ? Mike WA6ILQ At 09:00 PM 5/13/05, you wrote: >And they were only going about 30 WPM. (Some contesters/DXers are much >faster. I'm sure they could,

Re: [Repeater-Builder] Re: CW vs. TXT messaging

WA6ILQ here, in Los Angeles. The local NBC outlet here runs Leno at 11:30pm. I'll start a tape in 2 hr mode at the start, and let it go through the CW portion. Mike At 09:39 PM 5/13/05, Ronny Julian <[EMAIL PROTECTED]> wrote: >You should. Roll tape on it for those of us at work who can't get a

Re: [Repeater-Builder]

That wasn't even a contest. I think I saw the SMS sender drop the phone on the desk before he even finished entering the message. NØATH wrote: > *YO - Cw Won on Jay Leno tonite* > ** > *Dave / NØATH* > > > > > > > > > *Ya

Re: [Repeater-Builder]

And they were only going about 30 WPM. (Some contesters/DXers are much faster. I'm sure they could, too, but I'm sure they knew they would have time to spare and didn't want to go too fast with the added pressure.) So, I guess "The quick brown fox..." is going to be replaced with "I just saved a b

Re: [Repeater-Builder] Re: CW vs. TXT messaging

You should. Roll tape on it for those of us at work who can't get a VCR hooked up in time! I'd like to show that at a hamfest to recruit new hams! [EMAIL PROTECTED] wrote: >At 22:53 5/13/2005 -0500, you wrote: > > >>YO - Cw Won on Jay Leno tonite >> >>Dave / NØATH >> >> >> > >You didn't

[Repeater-Builder] Re: CW vs. TXT messaging

At 22:53 5/13/2005 -0500, you wrote: >YO - Cw Won on Jay Leno tonite > >Dave / NØATH > You didn't put SPOILER ALERT in the subject for us poor West Coast slobs! That's OK, now I don't have to stay up & watch. Bob NO6B Yahoo! Groups Links <*> To visit your group on the web, go to: ht

Re: [Repeater-Builder] Repeater-Builder antennas and other products

At 18:54 5/13/2005 -0400, you wrote: >It is all in the rating. >The big guys use DBD (the way to go) >Many Ham grade antennas use DBi >or the new fake or made up DBC >Stick with DBD you will never go wrong! >If you note QST will not print an antenna gain unless >it is in DBD. >73 Russ, I prefer dB

[Repeater-Builder] Re: Morse Code Contest on JAY LENO

It is for these guys! What a show! I don't think those two kids had a bit of a chance! Did anyone roll tape on that? A MPEG file uploaded would be really appreciated if you did. --- In Repeater-Builder@yahoogroups.com, "Russ" <[EMAIL PROTECTED]> wrote: > For some of us CW is a very big part

[Repeater-Builder] Re: DB-228 Mounting Bracket

Wow, One phone call to a /\/\ dealer and he had one "in the way" on a shelf, he sez... Great guy he is... Complete with the standoffs for the top and bottom to prevent sway!!! Thanks to all who suggested a fix...(I still dont know how far from the tower the dipoles will be BUT I'll know next w

[Repeater-Builder]

YO - Cw Won on Jay Leno tonite   Dave / NØATH Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/  To unsubscribe from this group, send an email to:[EMAIL PROTECTED]  Your use of Yahoo! Groups is subject to the Yahoo! Terms o

Re: [Repeater-Builder] Repeater-Builder antennas and other products

Don- Now tell everyone about your experiences with the 7.06 Spectrum "ham grade" repeater!! KS0F -- Original Message -- Received: Fri, 13 May 2005 08:37:32 PM CDT From: Don Jennings KI0EO <[EMAIL PROTECTED]> To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Repeater-Bui

Re: [Repeater-Builder] Speaking of Dayton...

Or he'll be found at the closest buffet restaurant looking fat, dumpy, & a little smelly wearing a baseball cap that says Icom or Yaesu and an HT on his belt playing the antics from the local 94 (talk-in) repeater. He'll be an easy find there. -- Original Message -- Received: Fri, 13 May

Re: [Repeater-Builder]

p902 pin 8 is for channel 1 TX also p903 pin 1 is for channel 1 RX    73 Ray   - Original Message - From: NØATH To: Mastr II Group ; Repeater-Builder@yahoogroups.com Sent: Friday, May 13, 2005 10:33 AM Subject: [Repeater-Builder] Hello Kevin or Eric ? Any luck

Re: [Repeater-Builder] Re: CWID

The correct callsign is N 0 X A S. The URL for the ID-O-MATIC Web site is: www.hamgadgets.com 73, Eric Lemmon WB6FLY Gary wrote: ... You might want to check out the ID-O-MATIC that is sold by N0AXS... Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yah

Re: [Repeater-Builder] Repeater-Builder antennas and other products

--- "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote: > One thing I've never been able to explain to people > is: Why do the big Celwave, Sinclair, etc. > "StationMaster" type antennas have only 5.2 dB gain? > Actually, the 2-meter range ones are listed as > typically having only 4.8 dB gain, after p

Re: [Repeater-Builder] Speaking of Dayton...

Bet I can spot you a mile away! :-) Mike Jim McLaughlin wrote: > Right!..and parked in the Salem Mall, standing next to the > car with the antennas and ham plates. That will surely narrow it down. > > Jim WA9FPT > - Original Message - > From: "Mike Pugh" <[EMAIL PROTECTE

Re: [Repeater-Builder] Speaking of Dayton...

Right!..and parked in the Salem Mall, standing next to the car with the antennas and ham plates. That will surely narrow it down. Jim WA9FPT - Original Message - From: "Mike Pugh" <[EMAIL PROTECTED]> To: Sent: Friday, May 13, 2005 20:28 PM Subject: Re: [Repeater-Builder]

Re: [Repeater-Builder] Dayton Repeaters, past and present.

contact  [EMAIL PROTECTED]DCFluX <[EMAIL PROTECTED]> wrote: If anyone comes across a SEA ESP1000/M repeater at Dayton for cheap,could you pick it up for me or at least get the contact information? Thanks.--MattYahoo! Groups Links<*> To visit your group on the web, go to:http://groups.yahoo.com/g

Re: [Repeater-Builder] Repeater-Builder antennas and other products

My experience,  My first VHF repeater on a really big tower and I installed one of those "high gain dual band base/repeater antennas." Well static desense finally set in after a couple months, so I decided to purchase a commercial grade DB products antenna for my ham repeater. I think the ham

Re: [Repeater-Builder] Speaking of Dayton...

Bob wrote: > I'll be the middle-aged white guy with a pot-belly and an HT on my > belt...oh, and I may be wearing a baseball cap (thinning hair, dontcha > know). That should narrow it down to where you'd be one of several thousand there. :-) Mike Yahoo! Groups Links <*> To visit your g

Re: [Repeater-Builder] Fwd: Motorola ID?

110Watt Motorola transmitter, no receiver...150-170 mhz. Similar to Micor . Lance N2HBA - Original Message - From: Budd Turner To: Repeater-Builder@yahoogroups.com ; [EMAIL PROTECTED] ; [EMAIL PROTECTED] Sent: Friday, May 13, 2005 8:55 PM Subject: [Repeater-Builder

Re: [Repeater-Builder] (unknown)mastr II exciter

Do you hear output at all on the expected frequency when on a hand held? You should be able to hear something but it will not be enough to move a watt meter. Check that the strip is getting +10V on the OSC 10V pin when the transmitter is "Keyed" and +10 continuous on the REG 10V line. If you hav

[Repeater-Builder] Fwd: Motorola ID?

Can anyone answer Dave's questions? If so, please reply to his addy below. Thanks 73 Buddk7iou <[EMAIL PROTECTED]> wrote: Do you have any way of ID this Motorola #? C73RXB Can it be converted to 220? Dave"Why should I hate someone on the basis of their race or religion, when I can take a little

Re: [Repeater-Builder] Motorola Micom SSB 100 Mobile Radio Manual

I will see if I still have a manual. What frequencies are you using? I volunteer for the local Red Cross. 73 Glenn WB4UIV At 07:00 PM 05/13/05, you wrote: >This is off base for repeaters BUT I'm looking for a manual for the >Motorola Micom SSB 100 mobile HF radio to finish off a local Red >Cr

Re: [Repeater-Builder] (unknown)mastr II exciter

Has the exciter been aligned? You'll get no RF output if it is way out of alignment. Chuck WB2EDV - Original Message - From: "NØATH" <[EMAIL PROTECTED]> To: Sent: Friday, May 13, 2005 8:13 PM Subject: Re: [Repeater-Builder] (unknown)mastr II exciter Ok & Thanks All - I have Pin 8 g

Re: [Repeater-Builder] (unknown)mastr II exciter

Ok & Thanks All - I have Pin 8 grounded to the Icon ( was already according to Simpson 260) The control head has been removed - We do have a GE test set hooked up with good microphone. The vol. and squelch controls are inside the chassis like the NHRC. We are grounding pin 25 for ptt and it k

Re: [Repeater-Builder] (unknown)mastr II exciter

ok P902 PIN # 8 is freq 1 select pin 1 is located at the bottom right if you are look at it with the connection to the right and solder side down. Mastr II exciter Pin 2 CG hi PIn 3 CG lo Pin 4 A- Pin 5 Mic Lo Pin 6 Mic hi PIn 7 Reg 10v Pin 8 F1 Select Pin 9 F2 Select Pin 10 F3 select Pin 11 F4 S

Re: [Repeater-Builder] Dayton Repeaters, past and present.

If anyone comes across a SEA ESP1000/M repeater at Dayton for cheap, could you pick it up for me or at least get the contact information? Thanks. --Matt Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe fr

Re: [Repeater-Builder] Repeater-Builder antennas and other products

Anytime I ever questioned this I was always told " The Antenna gain is always set by the advertising department." I think that must be fairly close to correct. Dave / - Original Message - From: "Russ" <[EMAIL PROTECTED]> To: Sent: Friday, May 13, 2005 5:54 PM Subject: Re: [Repeater-Bui

[Repeater-Builder] Motorola Micom SSB 100 Mobile Radio Manual

This is off base for repeaters BUT I'm looking for a manual for the Motorola Micom SSB 100 mobile HF radio to finish off a local Red Cross project. I need to see the dip switch \ diode setup to get more than 1 channel to work. Thanks! Yahoo! Groups Links <*> To visit your group on the

Re: [Repeater-Builder] Morse Code Contest on JAY LENO

For some of us CW is a very big part of Ham Radio! - Original Message - From: Don Pomplun To: Repeater-Builder@yahoogroups.com Sent: Friday, May 13, 2005 2:58 PM Subject: RE: [Repeater-Builder] Morse Code Contest on JAY LENO apology accepted   ;=)Morse C

Re: [Repeater-Builder] Repeater-Builder antennas and other products

It is all in the rating. The big guys use DBD (the way to go) Many Ham grade antennas use DBi or the new fake or made up DBC Stick with DBD you will never go wrong! If you note QST will not print an antenna gain unless it is in DBD. 73 Russ, - Original Message - From: "[EMAIL PROTECTED]"

[Repeater-Builder] (unknown)

It's Pin 8 of the exciter connector It took me about 10 seconds to look at the label inside a near by MASTRII. The label is not registered with the pins, so Count from left to right starting with the first pin on the left. If you really need to Know what pin on the ICOM it is just use your trus

Re: [Repeater-Builder] Dayton Repeaters, past and present.

no6b1 wrote: whoever designed the ARX-270 didn't have a clue Was that the antenna that was on your 146.625 Dayton repeater 2 years ago? I always wondered why it wasn't full quieting at the opposite end of the flea market while my portapeater on a mag. mount across the

Re: [Repeater-Builder] Repeater-Builder antennas and other products

One thing I've never been able to explain to people is: Why do the big Celwave, Sinclair, etc. "StationMaster" type antennas have only 5.2 dB gain? Actually, the 2-meter range ones are listed as typically having only 4.8 dB gain, after putting the longer, lower-frequency elements in the 22' long

[Repeater-Builder] looking for L1475 uhf amps

We need 2 -6 uhf 450-470 mhz of these littel convertacom amps. a.s.a.p.. if you find a couple at Dayton let me know a.s.a.p. we'll take them Not going for the first time in 36 years. enuf is enuf. Been ' Soaked ' in Dayton for the last time have fun to all you misguided soles who are going to at

[Repeater-Builder] Motorola phone patch model L1159A

Does anyone have a book or wiring schematic for this thing. Is there any "programming" required? How well do they work? Any information will be great. Thanks AC0Y Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To u

Re: [Repeater-Builder] Repeater-Builder antennas and other products

Nope, Just me after a long week getting ready for Dayton. Try it again please... http://www.repeater-builder.com/products/antennas.html Scott Scott Zimmerman Amateur Radio Call N3XCC 612 Barnett Rd Boswell, PA 15531 - Original Message - From: "Dave VanHorn" <[EMAIL PROTECTED]> To: ;

Re: [Repeater-Builder] Repeater-Builder antennas and other products

At 01:39 PM 5/13/2005, KD5SFA wrote: >http://www.repeater-builder.com/products/antennas.html Ah! The SECRET antennas link.! Maybe that's why sales are down? :) Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsub

Re: [Repeater-Builder] Repeater-Builder antennas and other products

At 01:22 PM 5/13/2005, Scott Zimmerman wrote: >All, > >Check out this page: >www.repeater-builder.com/products > >Click on the antennas link What antennas link? Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubs

RE: [Repeater-Builder] Morse Code Contest on JAY LENO

apology accepted   ;=) Morse Code is no longer ham radio related 73, Don K2BIO PS  Jay doesn't show up on QRZ, but maybe that's not his real name. At 01:54 PM 5/13/2005 -0500, you wrote: SORRY About the off Topic Non ham radio related post , I will try and Refrain from this in the Future , it

Re: [Repeater-Builder] uhf Micor 450-470 lowering freq.

brucenanney wrote: > How far can you move a micor 450-470 down? I moved one to 444.000 Mhz. > I put a 6pf cap. across L101 on Rx to increase sensativty. I need to > tune one to 442.675 on Rx, Not worried about Tx. Bruce, KD4BOH. I've had one down to abt 438-something. Without mods, it was heari

Re: [Repeater-Builder] Re: CWID

Mike wrote: > Anyone figure out any information on this? i could not find anything > at all Here's the URL: -- Jim Barbour WD8CHL > > - Original Message - From: "Gary" <[EMAIL PROTECTED]> To: > Sent: Thursday, May 12, 2005

RE: [Repeater-Builder] Morse Code Contest on JAY LENO

SORRY About the off Topic Non ham radio related post , I will try and Refrain from this in the Future , it was not My intent to offend anyone. 73 Don KA9QJG Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscrib

Re: [Repeater-Builder] Morse Code Contest on JAY LENO

What is/was Jay Leno's callsign? -- Original Message -- Received: Fri, 13 May 2005 12:04:24 PM CDT From: Benjamin Naber <[EMAIL PROTECTED]> To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Morse Code Contest on JAY LENO > Jay Leno is/was a ham... > > > > > --- Don

Re: [Repeater-Builder] Morse Code Contest on JAY LENO

With no flames intended - or is that possible? QRZ will show the license class of all those who would respond with - Not radio related - OUCH!!! / Sorry Dave / NØATH ( Is there a flame inside an active dynamite fuse? ) - Original Message - From: "Buley, Kenneth L (GE Consumer & Industr

Re: [Repeater-Builder] Repeater-Builder antennas and other products

http://www.repeater-builder.com/products/antennas.html -Original Message- From: Scott Zimmerman <[EMAIL PROTECTED]> Sent: May 13, 2005 2:22 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Repeater-Builder antennas and other products All, Check out this page: www.repea

RE: [Repeater-Builder] Repeater-Builder antennas and other products

Scott, I don't see the antennas link. Jamey Wright Systems Analyst Morgan County EMCD 911 Decatur, Al 256-552-0911 -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Scott Zimmerman Sent: Friday, May 13, 2005 1:22 PM To: Repeater-Builder@yaho

Re: [Repeater-Builder] Re: Di-Electric Grease

I may have missed part of this discussion, but if the grease is put in the connector or under black tape, how is it exposed to UV sunlight so that it will destabilize? My understanding about silicon grease is that it can change the dielectric constant of the connector.  I have used sili

[Repeater-Builder] Repeater-Builder antennas and other products

All, Check out this page: www.repeater-builder.com/products Click on the antennas link Scott Scott Zimmerman Amateur Radio Call N3XCC 612 Barnett Rd Boswell, PA 15531 Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*>

Re: [Repeater-Builder] Dayton

Our Spaces will be the usual 707-710 that we have had for the past few years. I will be sending an e-mail early next week with the products we will have, pricing, quantities available, final repeater frequencies, etc. I will try to make it one page or less so you can all print it out and bring it

Re: [Repeater-Builder] Re: Di-Electric Grease

The proper thing to use is the PTFE Teflon lube that comes with the antenna. At least it's supposed to come with new antennas... It looks like silicon, but it's not. Silicon grease has been found not to be completely UV stable. -- Jim Barbour WD8CHL n8sac wrote: > --- In Repeater-Builder@ya

[Repeater-Builder]

Hello Kevin or Eric ? Any luck yet on telling me what pin to ground on the mastr II mobile Icon  to get the transmitter to operate on channel 1. I feel like I've been forgotten. It is an 8 channel 100 watt vhf mobile - I have sent the numbers you requested. I think they are correct.   Dave

RE: [Repeater-Builder] Morse Code Contest on JAY LENO

Still is, just not radio related..;>) Kenneth Buley Bullitt County EMA Deputy Director CD-2 Bullitt/Spencer Counties Red Cross ECRV Driver/Operator BC-6 Bullitt County ARES/RACES Coordinator KY4DES "Dante once said that the hottest places in hell are reserved for those who in

Re: [Repeater-Builder] Morse Code Contest on JAY LENO

Jay Leno is/was a ham... --- Don <[EMAIL PROTECTED]> wrote: > I thought some would find this interesting. > > > - > > Tomorrow, Friday May 13th, the Tonight Show with Jay > Leno will feature > a message sending/receiving contest between a cell > phone text > messaging team and a Morse code t

Re: [Repeater-Builder] Re: Repeater Desense

List Stand-By.. Scott Scott Zimmerman Amateur Radio Call N3XCC 612 Barnett Rd Boswell, PA 15531 - Original Message - From: "rtoplus" <[EMAIL PROTECTED]> To: Sent: Friday, May 13, 2005 9:50 AM Subject: [Repeater-Builder] Re: Repeater Desense > I am interested as well Kevin. >

RE: [Repeater-Builder] Re: CWID

Can you document the changes for us? Wayne, ai9q -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Larry Kemper Sent: Friday, May 13, 2005 8:57 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: CWID Guys I did order

Re: [Repeater-Builder] Re: CWID

Guys I did order the ID-O-Matic and installed it. The only thing is such trash with square wave output so built a little audio filter to smooth things out. That is more pleasant to listen too. Yes cw can be pleasant.. Also users who complained of no beep now have it. Thanks WA0VUS Larry Kem

RE: [Repeater-Builder] Re: CWID

Try again. It worked for me. Or go direct to their website.. http://www.hamgadgets.com/index.php Wayne, AI9Q -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Mike Sent: Friday, May 13, 2005 4:33 AM To: Repeater-Builder@yahoogroups.com Subjec

Re: [Repeater-Builder] Re: CWID

Anyone figure out any information on this? i could not find anything at all - Original Message - From: "Gary" <[EMAIL PROTECTED]> To: Sent: Thursday, May 12, 2005 11:44 PM Subject: [Repeater-Builder] Re: CWID > Larry, > You might want to check out the ID-O-MATIC that is sold by N0AXS.

[Repeater-Builder] Re: CWID

Here's the 800 Hz BPF for the square wave outputs of the K-ID & ID-O-MATIC PIC IDers. Bob NO6B Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*>

[Repeater-Builder] Dayton

Hi Kevin: What spaces will Repeater Builder be at this year at Dayton? Looking forward to stopping by again this year. 73 JIM KA2AJH Kevin Custer <[EMAIL PROTECTED]> wrote: > Eric Lemmon wrote: > > >The most recent instance was with a Cushcraft ARX-270 2m/440 antenna. > > > > I tried

[Repeater-Builder] Re: CWID

--- In Repeater-Builder@yahoogroups.com, "Gary" <[EMAIL PROTECTED]> wrote: > Larry, > You might want to check out the ID-O-MATIC that is sold by N0AXS. > This little Kit will run you about $20 bucks and works like a champ! > Nice. Like the K1EL K-ID PIC but with the activity timer. Wish I had

[Repeater-Builder] Re: Repeater Desense

I am interested as well Kevin. Bob, GMRS WPVV845, Amateur KG4WAD, LMRS WPXC892 --- In Repeater-Builder@yahoogroups.com, Dave VanHorn <[EMAIL PROTECTED]> wrote: > > > > >Repeater Builder is currently vending a dual band antenna that works > >well in duplex service. We'll have several at Dayton

RE: [Repeater-Builder] Re: CWID

Dang, that ID-O-MATIC is so cool I ordered one on-the-spot! I have NO idea what I'll do with it, but that's beside the point! -- de WM4B Mike Kathleen, GA 146.25/85 -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Gary Sent: Thursday, May 1

Re: [Repeater-Builder] Repeater Desense

> >Repeater Builder is currently vending a dual band antenna that works >well in duplex service. We'll have several at Dayton, with a special >show price. >Scott and I have installed several for non critical ham repeater duty >and are very pleased with their performance so far. I won't be able t

[Repeater-Builder] Re: Repeater Desense

--- In Repeater-Builder@yahoogroups.com, Kevin Custer <[EMAIL PROTECTED]> wrote: > Eric Lemmon wrote: > > >The most recent instance was with a Cushcraft ARX-270 2m/440 antenna. > > > > I tried one of these antennas first as a low profile repeater antenna, > then as a remote base antenna. I was

Re: [Repeater-Builder] Re: Speaking of Dayton...

no6b1 wrote: >I'll be wearing a bright orange LA Marathon Communications hat, or if >the sun's out, a drab green floppy hat, & LA Marathon T-shirt. Will >be on my portapeater (147.585 in/144.93 out, PL-141.3), Dave K.'s, or >Kevin's if he brings one again & doesn't sell it while I'm still using >

Re: [Repeater-Builder] Repeater Desense

Eric Lemmon wrote: >The most recent instance was with a Cushcraft ARX-270 2m/440 antenna. > I tried one of these antennas first as a low profile repeater antenna, then as a remote base antenna. I was so disappointed with it that I took it down and threw it in the trash. Yes it was brand new.

Re: [Repeater-Builder] Caution on Bomar Crystals

[EMAIL PROTECTED] wrote: >I stand corrected. > >I just confirmed this by calling Bomar. They do have a $60.00 minumum, but >that includes the shipping so 2 channel elements in most cases will meet the >minimum. > >Steve >WA6ZFT > Their Land Mobile pricing can be seen here:

[Repeater-Builder] Re: CWID

Larry, You might want to check out the ID-O-MATIC that is sold by N0AXS. This little Kit will run you about $20 bucks and works like a champ! Look up N0AXS or ID-O-MATIC on your search engine and he has a website where you can get this kit and other really neat items for repeaters! I use this

[Repeater-Builder] Morse Code Contest on JAY LENO

I thought some would find this interesting. - Tomorrow, Friday May 13th, the Tonight Show with Jay Leno will feature a message sending/receiving contest between a cell phone text messaging team and a Morse code team. The Morse code team will consist of Chip Margelli K7JA and Ken Miller K6CTW.