Naturally!
Coy Hilton wrote:
>no.. no...no...BHF is the band just to the right of VHF and just to
>the left of NHF and just below GHF and just above SPACEyou now
>THE FINAL FROUNTIER.<;-)
>73
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http:
Anyone have a manual for the S-Com MRC- 100 controller in PDF or
Need command structure to reprogram
Thanks
Jimmy Floyd
NQ4U
www.mtndx.org
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from
I believe so, kg6iro was busted for jamming bell police dept and the califronia
highway patrol, the fcc revoked his ham & grms licences
but it was over 1 year from his conviction date and he contested that the fcc
did not act in a timely manner and stated his licences were still valid, and in
p
Hi Juan,
Your e-mail address was bouncing messages back to Yahoogroups so it
delisted you. I've reinstated your membership.
The 7K can operate two repeaters by tying a second repeater to the
link port. It'll handle the CORs and PTTs, send messages to the proper
TX (if the messages are
Aha! I think I've identified my dinosaur remains as some
version of Motran base/repeater. That's a start. I still
can't determine exactly which receiver and transmitter I
have. I assume there were a few variations.
Anybody got a manual for something like this that they would
part with? Or
I was wondering if anyone has the tuning instructions for the older
Micor receiver.not the mobile.
VE3CTP
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[E
I need to know where the voltages are, and yes it is an older Micor
station. It has a ribbon type cable on it. Could you scan it and
email it to me? Also is there a specific station control module for
the older type? I tried a tln4635b and it did not work.
Chris
--- In Repeater-Builder@yaho
At 7/17/2005 12:01 PM, you wrote:
> Is it true the GE Custom MVP radio ... MVP meant
> Missing Valuable Parts?
>
> Neil - WA6KLA
Compared to the Mastr II, the MVP is missing:
- 2 poles of IF filtering (8 vs. 10). IF board is the same though, so
adding it back in is fairly easy.
- 1 4.7 u
I think I like the BoHemienan Frequency idea :) I guess we will have to
figgure out a band & submit it to the next IARU Conference 07 I think isn't
it ?
- Original Message -
From: "Coy Hilton" <[EMAIL PROTECTED]>
To:
Sent: Monday, July 18, 2005 7:07 PM
Subject: Re: [Repeater-Builder]Wa
Now the truth comes out ! Playing Wannabe cop, we just had a similar problem
with a turkey who so far I know a non-ham over in Ottawa County, he just got
busted. I was on the phone one day with State Dispatch about an issue and I
asked about the phoney cop case & I also advised them about some
no.. no...no...BHF is the band just to the right of VHF and just to
the left of NHF and just below GHF and just above SPACEyou now
THE FINAL FROUNTIER.<;-)
73
--- In Repeater-Builder@yahoogroups.com, "Ron Wright" <[EMAIL PROTECTED]>
wrote:
> Neil,
>
> BHF is Bragging Here in Florida, hi.
The problem is selective enforcement AND too much spare time on
their hands. Instead of horassing thoes who would help them in a
time of need, they should be nailing drunk driver and putting then
in jail. I just watched a Sherrif Deputy sitting at an intersection
and about 10 cars ran the STOP
The problem is that there is one timeout timer, one
carrier delay (hang-in) timer, one identifier, and
one you get the idea.
Yes, you can connect two repeaters to it, and they will
repeat, but it's really obvious that the 7K wasn't designed
for the job.
I'd keep it and get a second, put one 7
The assumption here you are looking at an early Micor Station.
You seemed to have forgotten to mention this tiny piece of look up
information.
That said, I do have the circuit board layout diagram for the
TLN4666A mother board.
What would you like to know about the TLN4666A mother
Hello MIke:
I am trying to use the controller in two repeaters , now we
have
them with one port controller and the two repeaters "in
paralell",
I have some of the outputs of the controller to turn one or
the other
off/on, If there is no easy way, think it will be going for
sale, it has
t
I am looking for a schematic for the tln4666a backplane. If any one
has one or knows where I can get one please let me know.
Chris
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group,
I had an older 7K and` I had the 222
repeater on port one and 440 on port 2 the worked just fine stand alone then I
would link them on net night.
73 Russ,
- Original Message -
From:
XE2SI
To: Repeater-Builder@yahoogroups.com
Sent: Monday, July 18, 2005 3:33 PM
S
At 12:33 PM 7/18/05, you wrote:
>I asked this to the S-Com site, but no answer yet, hope
>somebody give some ligth here: I have a S-Com 7K controller
>with Version 2.03 ( think is the latest firmware ),
Latest is 2.04
>my question
>is if it can handle two repeaters separated with their own timer
Jim B. wrote:
> So I don't believe any dept
> should still be using them. I know NO ONE here in NE Ohio that uses
> 10Ghz radar anymore.
I should add that they don't use 10Ghz units for issuing tickets anymore...
--
Jim Barbour
WD8CHL
Yahoo! Groups Links
<*> To visit your group on the
MPH units were dogs... I know I repaired and recertified them for several
years. At least in FL X band (10 GHz) was
not valid even before 1993. I am saying that I THINK X band was out of the
picture nationwide at that time but I never saw it in
writing so I cant bet my life on it.
I too was in Law
Frank R. Vondra wrote:
> As an amateur radio operator and 30 year law enforcement
> veteran, I agree with you Lance. After blowing up the
> photo of the 1995 Caprice displayed on the jars webpage,
> I'm somewhat curious to know why the defendant has an
> MPH K-55 mobile radar unit mounted on the d
OK, Mitrek experts:
On a properly tuned mobile VHF Mitrek transmitter, what is the tx
noise likely to be? In other words, how far down is it 600khz away, in
case I were to use one as a transmitter in a repeater situation? (not
a duplexed mitrek, just as a transmitter)
I appreciate the help, th
There's not a high-stab channel element per se, but Micor PURC (paging)
stations used an external high-stability or ultra-high-stability oscillator
for simulcast operations. These were external rack-mount units. A special
channel element plugs into the exciter that has two pigtails on it - one fo
Is there high precision channel element for simulcasting a micor
transmitter. I have a heated micor 800 kxn1071a and since it is 12 mhz
based trying to figure if there is away to get Bowan to cut one for
high band. Yes Skipp I could just net the transmitters. :-)
Chris n6icw
Yahoo! Grou
I asked this to the S-Com site, but no answer yet,
hope
somebody give some ligth here: I have a S-Com 7K controller
with Version 2.03 ( think is the latest firmware ), my
question
is if it can handle two repeaters separated with their own
timers
and ID's, can't find anything related in th
I have a suburban 1997 white with 6 antennas for Ham radio rigs and a UHF
radio for Med Chs. I am also the Asst. EMS Director with an ambulance
service and have flashing lights. the State Police here in CO have hassled
me about my suburban. To have lights you must possess an Authorized
Emergen
Kevin,
Did you try the SpectrTAC Yahoo List? You might get a better response
there. I personally know at least one fellow locally who has done
what you describe and he monitors that list now and then.
Bruce
WA6YLV
KMJ335
--- In Repeater-Builder@yahoogroups.com, "Kevin Berlen, K9HX"
The Moxy,Maxar,and Maxar80 are all the same chassis
only with minor differences from each other. The
Motorola Flexar desktop repeater was made out of the
transmitter side of the Maxar chassis and the receiver
was the receiver side of the maxar. Each chassis was
mounted in different boxes for isolat
In the February 1994 issue of MRT there was an article by Carl
Ebinger of the Dade County Radio Shop who made some interesting
claims about improving the performace of the SpectraTAC systems used
by Dade Co. EMS. His article claimed that he could improve the
performance of the SQM by the addition o
As others have mentioned, the Moxy was the bottom of the barrel
Motorola radio. They came out about thirty years ago to compete with the
rice boxes that were showing up in commercial service.
They may be OK for playing garage repeater or maybe even some linking,
but I don't think I woul
Can't help you with the CE-4 manual ... but what is a 317 plug-in?
Neil - WA6KLA
John Burch wrote:
>
> Wanted - original paper manual (or excellent
> full-sized photocopy) for Cushman CE-4
> service monitor.
>
> Would also like to find the manual for the
> Cushman model 317 plug-in.
>
Wanted - original paper manual (or excellent
full-sized photocopy) for Cushman CE-4
service monitor.
Would also like to find the manual for the
Cushman model 317 plug-in.
Thanks de John
..
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/
A photocopy should run about $2.00 overall.
I will need your snail mail address however ...
Neil
Paul Kelley wrote:
>
> On Sunday 17 July 2005 02:27 pm, Neil McKie wrote:
> > More - found it !!!
>
> Indeed you did !! Thanks Neil, I appreciate it. I thought
> this was going to be
Hello need some ge master II or MVP 406-420 radios for a new link being
built in southern Oregon & N Ca. Willing to pay up to $100 each. If
some one has master II stations we can also talk...20-40watts ok
(MVP), but if possible 75 watt Master II prefuredthanks, chris
radiolinks.org
Gents,
Recently (May 2005) two young ham radio operators in my town,
each of whom drove retired New York State Police cruisers
they had purchased at state auction were questioned and given
a hard time by both the local county Sheriff and several State Police
officers.
Both are amateur radio op
35 matches
Mail list logo