[Repeater-Builder] Re: GMRS Radio

Thanks for all the help. I received lots of great information. --- In Repeater-Builder@yahoogroups.com, Joel joellan...@... wrote: Anybody have any reviews or maybe a used GMRS radio? I would like a 4 watt radio. Is the FCC doing in with GMRS repeaters? Does anybody have them for sale? Do

[Repeater-Builder] GMRS Radio

Anybody have any reviews or maybe a used GMRS radio? I would like a 4 watt radio. Is the FCC doing in with GMRS repeaters? Does anybody have them for sale? Do they make a portable repeater?

[Repeater-Builder] Motorola radios and Zetron 37 controller

We have 2 repeaters that are more or less the same. One is on 2 meters and the other is on 440. They both exhibit the same problem, they lockup after a while and then need to be power cycled. They ran for years without issue. We have the Instruction manual for the Zentron controller, but

[Repeater-Builder] R2001D Parts/boards

Hi to all here on the group, Is anyone in the group know where I can get parts and boards for the Motorola R2001D service monitor? I'm particularly interested in the A2 and A7 boards. v44kai.Joel. -- I am using the free version of SPAMfighter. We are a community of 7 million users

Re: [Repeater-Builder] Radio or Duplex watts

No, and no. Your repeater would be putting out about 65 - 85 % of your 4 watts, based on the type of duplexer setup. v44kai.Joel. - Original Message - From: x.tait.tech To: Repeater-Builder@yahoogroups.com Sent: Friday, May 28, 2010 4:47 AM Subject: Re: [Repeater

Re: [Repeater-Builder] Transformer cores

a roll in my tool bag. I hope this helped. v44kai.Joel. - Original Message - From: Doug Hutchison specialq@ntlworld.com To: repeater-builder@yahoogroups.com Sent: Saturday, May 29, 2010 12:37 PM Subject: [Repeater-Builder] Transformer cores Hello, Got situation where

Re: [Repeater-Builder] Transformer cores

You are welcome, Just make sure you wind the tape the same way you would for the pipe thread (right hand for tightening) so that when screwing it in the thread will seal it, then taking it out wouldn't be a problem. v44kai.Joel. - Original Message - From: Doug Hutchison specialq

Re: [Repeater-Builder] Transformer cores

Very very good Doug, It always work for me, never had to even undo one. v44kai.Joel. - Original Message - From: Doug Hutchison specialq@ntlworld.com To: repeater-builder@yahoogroups.com Sent: Saturday, May 29, 2010 3:17 PM Subject: Re: [Repeater-Builder] Transformer cores

Re: [Repeater-Builder] Feedback on Marconi 2955B RF Test Set

It would be a great investment I have 2 (2955) a 2955, and a 2955A so the 2955B is much later beast than my 2 2955's I wish I had bought a 2955B or 2955R. Take care that's all I can say for now. v44kai.Joel. - Original Message - From: Tedd Doda la...@sentex.net To: Repeater

[Repeater-Builder] R2001D (A13) card

about this unit, someone was able to send me the operating manual, he doesn't have a R2001D nor does he have the service manual. My main concerns are the A13 card, before I start to check for other problems. I will appreciate any help here, thanks in advanced. v44kai.Joel.

Re: [Repeater-Builder] R2001D (A13) card

Thanks Erick, Can you tell me anything about the A13 card? v44kai.Joel. - Original Message - From: Eric Lemmon wb6...@verizon.net To: Repeater-Builder@yahoogroups.com Sent: Tuesday, December 22, 2009 11:08 AM Subject: RE: [Repeater-Builder] R2001D (A13) card Joel, FYI

Re: [Repeater-Builder] R2001D (A13) card

Thank you Erick, v44kai.Joel. - Original Message - From: Eric Lemmon wb6...@verizon.net To: Repeater-Builder@yahoogroups.com Sent: Tuesday, December 22, 2009 11:25 AM Subject: RE: [Repeater-Builder] R2001D (A13) card Sorry, no. I have no knowledge of this equipment. 73, Eric

Re: [Repeater-Builder] R2001D (A13) card

Hi Bill, Yes, that makes me feel better, I can now start to look at the SMPS, thanks very much. v44kai.Joel. - Original Message - From: william...@aol.com To: Repeater-Builder@yahoogroups.com Sent: Tuesday, December 22, 2009 12:43 PM Subject: Re: [Repeater-Builder

[Repeater-Builder] DB-212's

Jeff... Something similar to this? http://www.ccdx.org/zedyx/mods/db212.htm WebMaster for the Cheshire County DX ARC, Located at: http://www.ccdx.org See Ya, Joel wa1...@ccdx.org or WA1ZYX K1XX DxCluster Node (Amateur Radio

[Repeater-Builder] (unknown)

I have seen before on a set of wacoms 641s that some one tuned the low input for the high  and the high for the low, it worked with only about 12 watts input

[Repeater-Builder] isolation

Just wanted to say thanks for all replys joel kj4si

[Repeater-Builder] Analog Repeater to APCO25 conversion?

, Located at: http://www.ccdx.org See Ya, Joel wa1...@ccdx.org or WA1ZYX K1XX DxCluster Node (Amateur Radio) http://www.ccdx.org/zedyx/home.htm http://home.webryders.net/surry 443.800 141.3 Keene, NH --- 449.450

[Repeater-Builder] isolation

can Anyone tell me the amount of isolation need on a set of duplexers to run a GE vhf pll exciter with a 100 watt pa. The GE reciever .15 uv @20 db sinad? power at 30 watts,50 watts 70 watts and 100 watts without desense Thanks kj4si

[Repeater-Builder] DTV channels

DTV station has a carrier frequency of 700Mhz and its analog counterpart was broadcasting at 55Mhz, you're probably going to want a higher gain antenna, which the UHF antennas typically are. And they are also much more directive. The DTV Channel designators mean nothing Joel - WA1ZYX

[Repeater-Builder] db 4062 duplexer

does anybody know what type of lubication is on the plunger of these cans?

[Repeater-Builder] johanson 5602 caps

anybody got a few of these for a set of db 4062 duplexers that they would like to sell? thanks joel kj4si

Re: [Repeater-Builder] High capacity capacitors

-100 k uF @ 35v please let us know here. v44kai.Joel. - Original Message - From: Com/Rad Inc To: Repeater-Builder@yahoogroups.com Sent: Monday, December 29, 2008 3:25 PM Subject: [Repeater-Builder] High capacity capacitors Hello Group A little off subject but I am

[Repeater-Builder] Radios on TV

of the guys talking into the BACK of the mic... http://www.emergencyfans.com/images/page4-station51/hspose3-c.jpg http://www.emergencyfans.com/images/index.htm WebMaster for the Cheshire County DX ARC, Located at: http://www.ccdx.org See Ya,  Joel   wa1...@ccdx.org

[Repeater-Builder] 9600 Packet radios

at: http://www.ccdx.org http://www.ccdx.org See Ya, Joel [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] or WA1ZYX K1XX DxCluster Node (Amateur Radio) http://www.ccdx.org/zedyx/home.htm http://www.ccdx.org/zedyx/home.htm http

[Repeater-Builder] Direct FM

For some that have used a pll icom and direct injected disc audio into pin #3 what is the normal amount of audio to get 5 khz deviation? I am useing a 2c pll icom and it is taking about 3 volt p-p is that about right? BTW The audio sounds great! Joel

[Repeater-Builder] Re: Desense has me pulling my hair out! (Was DB4060 Duplexer Cables

the cables where 10 inches long on all Joel kj4si -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Mike Besemer (WM4B) Sent: Monday, October 06, 2008 7:39 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Desense has me

Re: [Repeater-Builder] what does this email mean?

Hi Chris, I agree with you, why suffer a whole class for a few IDIOTS, let the IDIOTS stand in the cold without they jacket. v44kai.Joel. - Original Message - From: Chris Carruba To: Repeater-Builder@yahoogroups.com Sent: Friday, September 12, 2008 5:27 AM Subject: Re

[Repeater-Builder] Re: db 4060 high band

these on the original freq and original factory cables with same results Second: You might note the IFR 1600's generator output value and crank it up min 10dB and better yet 20 dB. Then have a second look... Did that Thanks Joel cheers, s. Joel Hall kj4si@ wrote: Hope some of you guys

[Repeater-Builder] db 4060 high band

Hope some of you guys that have some experince with db 4060 duplexer,the pass is fine but the notch is the problem I can see the notch at around 35db on my ifr 1600s per each can but when i combine them together about 50db is the best i can get I have new cables made 1/4 wave long , the tuning

Re: [Repeater-Builder] Cables on Duplexer

it still has its sensitivity 0.25 - 0.35uv, or better should be good. I will hate to touch the duplexer without making sure that these other components are checked. Hope you get fix, let us know what you find, when you do. v44kai.Joel. - Original Message - From: John Transue

Re: [Repeater-Builder] Re: Help! Duplexer setup = with two service monitors and a spectrum analyzer

Skipp, thanks for responding. All I want is a setup for the equipment I listed (NOTE: NO TG in none of the unit, the 2955/A will do duplex) that will allow me to tune a duplexer, and the procedure. v44kai.Joel. - Original Message - From: skipp025 [EMAIL PROTECTED] To: Repeater

Re: [Repeater-Builder] Help! Duplexer setup = with two service monitors and a spectrum analyzer

Got you Don, thanks for responding. But I'm looking for something more specific as to, how one may hook up, the aforementioned equipment to do what the spectrum analyzer/with the TG does to obtain a set of duplexer tuned to a specific frequency. v44kai.Joel. - Original Message

[Repeater-Builder] IFR 1600s

trying to save a few dollars. Joel

[Repeater-Builder] GE Phoenix raw audio out...

Right off the rear connector Read about ¾ of the way down this page. http://www.ccdx.org/zedyx/mods/ab_mod.htm Joel - WA1ZYX WebMaster for the Cheshire County DX ARC, Located at: http://www.ccdx.org BLOCKED::http://www.ccdx.org See Ya, Joel

[Repeater-Builder] Re:power supply / battery system for repeater site

If your controller has any logic outputs,config one to turn a external battry charger on and if you have one with timers and such,program it to cut off when battery is charged Joel Hall Kj4si - Never miss a thing. Make Yahoo your homepage.

[Repeater-Builder] KLN6209A KLN6210A 123.0Hz

Please, if someone has a set they could part with, please email me off list. Thanks, Joel - WA1ZYX [EMAIL PROTECTED]

[Repeater-Builder] KLN6209A KLN6210A 123.0Hz

Please, if someone has a set they could part with, please email me off list. Thanks, Joel - WA1ZYX [EMAIL PROTECTED]

Re: [Repeater-Builder] Re: Duplexer input and output power

to the test gear figures. So, is the figurers always the right thing to work with, or they are just guides for a Tech with a bad hearing? v44kai.Joel. - Original Message - Fom: Jesse Lloyd To: Repeater-Builder@yahoogroups.com Sent: Wednesday, August 29, 2007 12:54 PM Subject

[Repeater-Builder] Duplexer input and output power

find it, and will like some insight on this. v44kai.Joel. - Original Message - From: Jeff DePolo [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Wednesday, August 29, 2007 10:39 AM Subject: RE: RE: Re: Re: RE: [Repeater-Builder] Re: Duplexers The 300 Ohm or 50 Ohm

[Repeater-Builder] 2 TNC's into 1 Radio

Is this what you're looking for? http://www.ccdx.org/zedyx/mods/2TNCs1Radio.htm

[Repeater-Builder] IC-H16 to IC-V200 Programming/cloning cable (schematic)

Hi folks, I'm in need of your help, in obtaining the schematic of the programming / cloning cable for the IC-H16 to the IC-V200 radios. Please note: This information will be posted on other sites as well. Your help will be appreciated, thanks in advanced. v44kai.Joel.

Re: [Repeater-Builder] AP4800 controller processor

(or know who bought the company from John Bell and who have it now that would be help) lying around, that may have a different problem, and have no use for it, and will like to part with it, I'm willing to make arrangement to get it. v44kai.Joel. - Original Message - From

[Repeater-Builder] AP4800 controller processor

to get this controller going again, now that I got the repeater TX and RX going, any help will be greatly appreciated. v44kai.Joel.

Re: [Repeater-Builder] AP4800 controller processor

Hi Bob, I thought that may be the other way out, but, know nothing about programming proms nor have a programmer, nor anyone in my country to do such, do you know someone capable off such, Bob? any help will be appreciated. v44kai.Joel. - Original Message - From: [EMAIL

[Repeater-Builder] Re: LC-53 Z Meter Capacitor Inductor Analyzer

Hi folks, I want to thank all who responded to post with intent to help, especially Marvin, Jim, and Denny, all of on different groups, for getting me the manual, and the various readings I was interested in, and the contact info I needed. v44kai.Joel.

[Repeater-Builder] LC-53 Z Meter Capacitor Inductor Analyzer

volt. (this should be in the leakage test mode) I also will like to know the ring voltage at the different ring points (this should be in the ring test mode) I will be posting this on other groups, so you see it somewhere else. Thank you all for your help in advanced. v44kai.Joel.

Re: [Repeater-Builder] Re: Spectrum Communications

skipp, thanks for the idea. Do you have any suggestions as to which compay to order a receiver from. Our repeater is near other repeaters and we don't want any rf interference. Joel skipp025 [EMAIL PROTECTED] wrote: As Jim pointed out... the problem(s) you report are frequent

Re: [Repeater-Builder] Re: Service Monitors (Amtronix)

, and tuning helical. v44kai.Joel. From: skipp025 [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Monday, April 23, 2007 10:49 AM Subject: [Repeater-Builder] Re: Service Monitors (Amtronix) Per my previous posts about HP Service Monitors... Amtronix also comes with my

[Repeater-Builder] in need of

Hello group I am in need of a 10 volt reg card for a ge station if anyone wants to part with a extra one contact me off list at [EMAIL PROTECTED] dot com thanks kj4si Joel

Re: [Repeater-Builder] Tektronics 492 Spectrum analyzer

What is your off list contact info? v44kai.Joel. - Original Message - From: Mike Mullarkey [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Wednesday, February 21, 2007 10:09 AM Subject: [Repeater-Builder] Tektronics 492 Spectrum analyzer If anybody is looking

[Repeater-Builder] EFJ Challenger as Repeater

Here's some info on the Challenger stuff if you're interested... http://www.ccdx.org/zedyx/mods/challenger.htm 73 de Joel - WA1ZYX

[Repeater-Builder] F.S. Tower Lighting System

...Joel W4SLH YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Re: [Repeater-Builder] RC-10

you guys are right, never seen a RC-10 by MCC, but icom has a RC-10 controller at the link below, v44kai...Joel http://www.usersmanualguide.com/icom/accesories__remote_controller - Original Message - From: Gary Hoff [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Friday

Re: [Repeater-Builder] Alpha 2000 radio and AP4800 Rptr controller

, November 08, 2005 12:13 PM Subject: Re: [Repeater-Builder] Alpha 2000 radio and AP4800 Rptr controller On 8 Nov 2005 at 19:14, v44kaiy wrote: Hi one and all, my name is Joel and my call is v44kai I'm from St. Kitts in the Caribbean. I have been reading the board for sometime, and I must say

[Repeater-Builder] (unknown)

7:09 PM To: Repeater-Builder@yahoogroups.com; Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] 4-pole folded dipole ant. At 06:38 PM 6/17/2005, Joel Hall wrote: Hope you'all may help on this VHF 4 pole with it in omni config it has 6 db gain,all in one direction it has 9 db gain.

[Repeater-Builder] 4-pole folded dipole ant.

Hope you'all may help on this VHF 4 pole with it in omni config it has 6 db gain,all in one direction it has 9 db gain. what I need to know if it is side mounted with all dipoles one direction what is the reduction in db at 180 degree? Thanks Joel Yahoo! Sports Rekindle the Rivalries. Sign

[Repeater-Builder] VHF Preamp...Thanks

Thanks to all who replied to my Preamp question. As usual, I gained valuable information ,ideas and resources. Regards...Joel Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send

[Repeater-Builder] VHF preamps

ith 24+ dB of gain. Thanks...Joel W4SLH Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Repeater-Builder] Has any one used a DB-228

228. The antenna is mounted at 500 feet and has been through two hurricanes. Regards...Joel W4SLH Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use

[Repeater-Builder] Kenwood Repeater

Thanks to all who have responded to my inquiry about a Kenwood TKR-750 repeater. As usual the information was extremely helpful Thanks again. Joel W4SLH Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder

[Repeater-Builder] Kenwood Repeaters

Good Morning: Thanks to Kevin and Jim for their comments on Kendecomm equipment. The information is greatly appreciated. Can any one recommend a source for a Kenwood TKR-750 ? TNX...Joel W4SLH Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com

[Repeater-Builder] Kendecom/Advance Communication Systems

or info the group might have concerning this equipment. TNX...Joel W4SLH Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject

[Repeater-Builder] LMR CABLE Electricity Rates

be Steaven will convince the local utility to use a lower rate. Thanks again to all. Joel W4SLH Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your us

[Repeater-Builder] LMR -400/600 cable

400/600 cables ? Is there a better cable for this purpose. Thanks for your help and commects now and in the past. Joel W4SLH Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email

[Repeater-Builder] DB-224 Tower Side Mounting

Any ideas will be appreciated. TNX...Joel W4SLH Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.