Assisted a friend who bought gallons of Colloidal Silver labeled R Pur Aloe
in CA.
These gallons are 8 years old. Bought before the Y2K event.
R PUR Aloe did not respond to my request for information about this CS
Gallon.
The label says very little. Supposed to be 500 PPM Colloidal Silver.
Perhaps, but probably not without some additive to prevent clumping.
500 PPm 'sludge' probably has enough small particles in it to do the job and the big ones too big to be absorbed? So, maybe it's not harmful, but 10 or 20 PPM would have done just as well.
Ken
At 09:02 AM 8/8/02 EDT, you
IT's just that it's extremely difficult to make small colorless particle
CS at over 50 PPM that will remain stable so far as particle size goes.
Ken
At 05:46 AM 8/7/02 -0500, you wrote:
Hello Everyone,
Yesterday I stopped at the health food store to pick up some
supplements. As I walked in
In a message dated 8/8/2002 8:38:41 AM Eastern Daylight Time,
coyote...@earthlink.net writes:
IT's just that it's extremely difficult to make small colorless particle
CS at over 50 PPM that will remain stable so far as particle size goes.
Ken
Well, the big companies won't do work with
Hello Everyone,
Yesterday I stopped at the health food store to pick up some
supplements. As I walked in the door , the worker stopped me and told me
a story about how someone gave her a quart of 500 PPM of CS. The CS was
grey in color and this worker was leery of using it on her husband. I had
Hi Russ,
The URL you gave me takes me to a religious site with no mention of CS.
Perhaps you could try again with one that works.Or am I missing
something?
Trem
- Original Message -
From: Russ Rosser russros...@rovin.net
To: silver-list@eskimo.com
Sent: Tuesday, March 19, 2002 7:34
Hi Ya'all,
About a month ago someone sent me a sample of a commercial 500 ppm CS.
At the time I tested the ionic portion as 93.6 ppm. I sent the material
to Kimbal labs for total silver analysis and it came back 553 ppm.
AS you wll recall there was a post about a week ago that indicated that
Is it permissible to publish to the list the brand name of the 500
ppm CS which was tested and found to be of lower ppm than stated on
the package?
Sure, but if we find out you're a vendor of a competing product I'll
lock you in the dungeon.
Seriously, I'm content to see end users and folks
Hi:
I found the information provided by the tests run By Ole Bob on the CS to be
very interesting. However to be of any real value one would have to know the
brand name of the product tested.
Is it permissible to publish to the list the brand name of the 500 ppm CS
which was
tested and found to
Hay wolfie,
If you put a mechanical stirrer on your unit then you will not have to
clean the wies or generated black stuff.
The CS you have made is OK don't throw it away. The one gallon CS
generators that I have made for people had a ring of 6 #14 electrodes 5
wet length,connected alternately
is especially applicable to the CS
circus. How many yellow liquids has Bob tested with no Ag at all...
James-Osbourne: Holmes
-Original Message-
From: M. G. Devour [mailto:mdev...@eskimo.com]
Sent: Wednesday, October 24, 2001 12:03 PM
To: silver-list@eskimo.com
Subject: Re: CS500 ppm CS
l would be interested in this 500ppm also. wouldnt cs that strength cause a
horrible detox?
hi marshall, l noticed your CS is clear and not yellow at all. can you tell
me if the more yellow it is..the more ppms it has? do you sell any CS that is
more than 5ppm. how long do you cook it to get it to be 5ppm. thanks teri
Julie
The CS that you sent that is sold as 500 ppm is the type that I have
seen twice before. It is very dark orange in color and has properties
that are similar to dye stuffs. That is it stains paper.
I believe that it is some type of compound that has a natural yellow
color. It exhibits a
Might be interesting to test for nitrates. They are one of the common forms
of silver that is that soluble.
There is no compound of silver that I can find that is orange. It could be
a combination of a yellow and a red compound of silver, but I suspect it is
just food coloring. Compounds of
Hi Marshall,
I tried the NO3 test and it showed nothing. So I added a small amount of H2O2
and no change, then I added a small amount of Clorox and the color disappeared
it is no crystal clear.
Re -tested for NO3 and nothing.
The T.E. is phenomenal. Never seen one so strong, it looks like it is
Thanks Ole Bob!
The DW that's in my 1 gallon pickle jar now is Walmart, but since the DMM never
gave me an mA readingI will test ALL the one's I can find locally, as soon
as this meter is working properly.
Any ideas how long it would take with the 27 volt (3-9 volt battery) set up to
make
I don't have any 500 ppm CS, I was just asking
questions. You already tested my CS - 12.3 ppm,
almost no Tyndall effect.
Bob,
How much 500 ppm CS would you need to test? What could you tell me about it
after testing? Any way to be able to make 500 ppm CS after obtaining the
test results?
Hi Julie.
All I use is 1 cc for the test, I don't think it practical to send that amount.
How about a half ounce?
T.E. is the tyndall effect. Have you ever seen a beam of sunlight shinning in a
darkened room and seen the motes floatingin the air?that is the Tyndall effect.
Light reflection from
Bob,
I don't have any 500 ppm CS, I was just asking
questions. You already tested my CS - 12.3 ppm,
almost no Tyndall effect.
Terry
___
Do You Yahoo!?
Get your free @yahoo.ca address at http://mail.yahoo.ca
--
The silver-list is a moderated
In a message dated 9/23/2001 9:11:39 PM Eastern Daylight Time,
ceram...@bol-online.com writes:
In any event I would like to respectively request that others who take
an interest in this issue give it a fair hearing, up to the point ppm is
determined. I would ask that people refrain from
All,
I have in front of me a liter of 170ppm CS. I made this from a generator
I acquired through educate-yourself.org, and I have every confidence it
is what it has been claimed to be. I acquired the generator with the
sole purpose of using its CS, and even higher concentrations made from
the
In a message dated 9/23/2001 2:35:31 AM Eastern Daylight Time,
ceram...@bol-online.com writes:
Subj:Re: CS500 PPM
Date:9/23/2001 2:35:31 AM Eastern Daylight Time
From:ceram...@bol-online.com (Reid Harvey)
Reply-to: A HREF=mailto:silver-list@eskimo.com;silver-list@eskimo.com
In a message dated 9/23/2001 12:15:37 AM Eastern Daylight Time,
fr...@strsoft.com writes:
Subj:Re: CS500 PPM
Date:9/23/2001 12:15:37 AM Eastern Daylight Time
From:fr...@strsoft.com (Frank Key)
Reply-to: A HREF=mailto:silver-list@eskimo.com;silver-list@eskimo.com/A
To:silver-list
Frank writes:
Many times we have run a 15KV unit down until the secondary voltage
was below 1KV.
Then asks:
Is this the sort of technical discussion that is no longer desired on
this list?
That remains to be seen, Frank. Certainly no harm is done and, aside
from the occasional warning about
Roger writes:
Frank: If it is, I don't see any reason why we can't move technical
discussions off list. Mike seems to think that without a lay
audience there would be no technical discussions.
Actually, I hope very much there's a basis for a more technical list.
It has taken a while to be
Roger wrote:
In a message dated 9/23/2001 12:15:37 AM Eastern Daylight Time,
Frank: My process is quite similar to Ole Bobs. So what I've observed during
the production of HVAC CS should be relevant to your earlier suggestions. I
run my process until the conductivity of the water gets so
In a message dated 9/23/2001 3:16:39 PM Eastern Daylight Time,
fr...@strsoft.com writes:
I am not convinced that the power limit of your power supply is related to
the
Frank: The power limit of my power supply is related to the increased
conductivity of the DW due to the formation of
Roger and Frank,
As you have said Roger, Reid: One way to START to answer the skeptics
is to get a total silver analysis to confirm the Ag PPM you mentioned.
In addition, I'm hoping the Frank Key will chime in. Perhaps you two
could get together so that he could either produce this high
Dr. Marijah McCain, on the 9/7/01 Rense broadcast at
http://www.broadcast.com/shows/endoftheline/01archives.html
speaks of the superiority of 500 PPM CS.
Dr. Jon Brooks was quoted as saying, Some scoundrels claim
their CS is 100-800 PPM. This is rubbish. At such concentrations the
particles
Dr. McCain (ND) sells 500ppm CS.
- Original Message -
From: sheba
To: silver-list@eskimo.com
Sent: Saturday, September 22, 2001 1:51 PM
Subject: CS500 PPM
Dr. Marijah McCain, on the 9/7/01 Rense broadcast at
http://www.broadcast.com/shows/endoftheline/01archives.html
Dear Andrea;
If you want the best dependable product make your own. If you
can't afford to buy a simple unit let me know and I'll send you the
instructions that any high school electronics student can make.
Best wishes Bob
ugly_sis...@webtv.net wrote:
Anything over 20 PPm is a waste, I would be a little suspicious of a product
that says 500 PPM.
Blessings
Ted
ugly_sis...@webtv.net wrote:
Hello!
I just started taking CS about a week ago, and am uncertain about the
quality of the product I am using. It says it is 500 ppm colloidal
silver,
In a message dated 8/18/00 3:47:09 AM Pacific Daylight Time,
rj...@dialnet.net writes:
ugly_sis...@webtv.net wrote:
Hi Bob I would like those instructions too
Rpger Cepelik
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join
Dear Bob,
PLEASE sent those instructions to me! Your help is SO appreciated. Susan
-Original Message-
From: Bob Squires [mailto:rj...@dialnet.net]
Sent: Friday, August 18, 2000 03:55 AM
To: silver-list@eskimo.com
Subject: Re: CS500 ppm
Dear Andrea;
If you want
To: silver-list@eskimo.com silver-list@eskimo.com
Date: Friday, May 21, 1999 8:37 PM
Subject: Re: CS500 ppm CS
Robert,
I'm sure everyone on the list will agree that you have become a
valuable resource!
This knowledge is a terrific find, and will help to expose the
charlatans that pop up to take
36 matches
Mail list logo