)
Thank you for any help
paul
Luiz Vaz wrote:
Hi,
it's not enough!
Try to run it from the prompt with /usr/local/sbin/racoon -f
/var/etc/racoon.conf -F .
But kill the previous session with ps waux | grep -i racoon .
Maybe it´s just a 2 phase timout!
Best Regards,
Luiz Vaz
2008/12/2 Paul mailto:jo
Not real familiar on how to accomplish this. Is there an easy way to
isolate network traffic so that any computer connected can only pass
traffic to the router and internet but not any other computer on the
network.
i.e. Infected computers cannot infect other computers on the network.
paul
I've tried to figure this out and am hitting a wall. I'm definately a
newbie on this one. I created the openvpn keys/ cert files on my laptop.
Input them into the pfsense openvpn server and into the dd-wrt openvpn
client portion. Once saved. I still can't ping the remote network going
from the
Testing out OpenVPN connection. Need to connect a DD-WRT router (Client)
to connect to a PFSense box (server) I'm having issues getting to work.
I installed a test connection on a laptop. It connected once
successfully. Was able to ping the pfsense but not access anything on
the lan. I disconne
Chris Buechler wrote:
On Sun, Feb 15, 2009 at 8:09 PM, Paul wrote:
PFSense Firewall Rule::
Proto: UDP
Source: Any
Port 1194
Destination Any
Port Any
GW Any
Destination port is 1194, not source.
-
To unsubscribe, e
Chris Buechler wrote:
On Sun, Feb 15, 2009 at 9:33 PM, Paul wrote:
That was it.. thank you.
Do I need to create a custom route table.? Its connected but can't pass
traffic or ping
Depends on how you have OpenVPN configured, it can add routes for you,
or you can add them man
Chris Buechler wrote:
On Sun, Feb 15, 2009 at 9:33 PM, Paul wrote:
That was it.. thank you.
Do I need to create a custom route table.? Its connected but can't pass
traffic or ping
Depends on how you have OpenVPN configured, it can add routes for you,
or you can add them man
Chris Buechler wrote:
On Sun, Feb 15, 2009 at 9:33 PM, Paul wrote:
That was it.. thank you.
Do I need to create a custom route table.? Its connected but can't pass
traffic or ping
Depends on how you have OpenVPN configured, it can add routes for you,
or you can add them man
We have a block ip address from our provider. The main ip for our
network and its port forwarding works well. I created 2 more virtual
ip's. The second set and its port forwarding work with out issue (port
80) also that go to another server. The 3rd virtual ip I created
partially works. SSH wor
We have a block ip address from our provider. The main ip for our
network and its port forwarding works well. I created 2 virtual
ip's. The second set and its port forwarding work with out issue (port
80) that go to another server. The 3rd virtual ip I created
partially works. SSH works. I then fo
. You have CARP setup
instead of Proxy ARP. If it works for SSH on the 3rd server not sure
why http would be the only one not working.
If it needs CARP do I need to set the VIP Password , VHID Group, and
Advertising Freq.
paul
Curtis LaMasters wrote:
Firewall Rules should look something like
port"...what does it mean?
As I understand it, he wants to have multiple IPs on the WAN side and
forward port 80 to different internal servers depending on which WAN IP the
request was received.
I don't think he can do this through the gui, maybe some config.xml-hacking
does the
port"...what does it mean?
As I understand it, he wants to have multiple IPs on the WAN side and
forward port 80 to different internal servers depending on which WAN IP the
request was received.
I don't think he can do this through the gui, maybe some config.xml-hacking
does the
I have something close setup. we have a block of ip's from our provider
and provided one of the tech employees this setup so they have a static
ip for their own testing network
Did a Virtual IP setup as Proxy ARP.
Did a 1:1 NAT with external ip > internal ip of said router.
Then set WAN Rule as
boot with USB keyboard support…..
Any suggestions?
Thanks,
Paul Taylor
to use on this model of Dell machine)
If there is some other way for me to get this info, please let me know...
If the info you are asking for can be obtained via the Bootloader, let me
know the steps to get it... (I'm not very familiar with FreeBSD)
Paul
-Original Message-
Fr
Scott,
No, this machine doesn't support normal keyboards... (It doesn't
have any PS2 ports).. I have tons of normal keyboards laying around, but I
think I'll short out the machine if I try to cram the PS2 connector into one
of the USB ports.. :)
Paul
-Original Me
port, how
would you use it if you disabled USB Fortunately, even with USB
disabled, the keyboard works to get into and navigate the BIOS. :)
Paul
-----Original Message-
From: Bill Marquette [mailto:[EMAIL PROTECTED]
Sent: Monday, August 01, 2005 1:33 PM
To: Paul Taylor
Cc: Scott Ullrich
a guide of sorts to creating a pfSense development system?
Since it's roughly based on Monowall, I would expect it to be similar...
Paul
-Original Message-
From: Bill Marquette [mailto:[EMAIL PROTECTED]
Sent: Monday, August 01, 2005 1:33 PM
To: Paul Taylor
Cc: Scott Ullrich; support
LAN that the port is assigned to...
We have not found a way to do a similar VLAN using Cisco gear,
unfortunately.. (It looks inevitable that we will move to Cisco...)
Paul
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Monday, August 01, 2005 12:56 PM
uld be great... In looking for Squid info on
the list, I see that the current squid package doesn't have a webGUI
component. I am interested in working on that, if I can get a system
working...
Paul
-
To unsubscrib
Scott,
I’m still getting the
same problem with the USB keyboard on the GX280 with the new build 73.2 from
last night…
Paul
ted in?
I am sure it wouldn't take much to put this in pfSense, since I think most
of that code is still the same as monowall... How do I go about getting it
added?
Paul
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For ad
other out... What fun!
Paul
-Original Message-----
From: Paul Taylor [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 02, 2005 2:29 PM
To: support@pfsense.com
Subject: [pfSense Support] concurrent captive portal users
By default, captive portal will allow multiple logins using the same
us
with an on/off switch for
now...
Paul
-Original Message-
From: Bill Marquette [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 02, 2005 2:59 PM
To: Paul Taylor
Cc: support@pfsense.com
Subject: Re: [pfSense Support] concurrent captive portal users
On 8/2/05, Paul Taylor <[EMAIL PROTECTED]&
both cable (DHCP) and DSL (PPPoe)… My
DSL is actually DSL Lite (256 down, 128 up) and really only there for backup
purposes…
Paul
drive doesn't
work and the hard drive is dead. So, we may be swapping this back for the
GX280 soon if we can't get a new drive tomorrow.
Paul
-Original Message-
From: Chris Buechler [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 03, 2005 5:46 PM
To: Paul Taylor
Cc: support@p
s there a method to have the console show the Console Setup
screen while SSH goes straight in?
Thanks,
Paul
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Chris,
Unfortunately, we are seeing the same negative results... pfSense gets to
the "setup VLANs" question and won't accept any input from the keyboard,
even with this hint.
Paul
-Original Message-
From: Chris Buechler [mailto:[EMAIL PROTECTED]
Sent: Thursday, August
--Original Message-----
From: Paul Taylor [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 04, 2005 11:48 AM
To: Chris Buechler
Cc: support@pfsense.com
Subject: RE: [pfSense Support] USB Keyboard on 73.2
Chris,
Unfortunately, we are seeing the same negative results... pfSense gets to
the "setup
ude the USB keyboard hint. This should tell us if it
didn't take the "hint" from the boot prompt, or if something else needs to
execute for USB support to kick in.
Paul
-Original Message-
From: Chris Buechler [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 04, 2005 12:51 PM
I'm using 0.73.4.1 and it has installed fine for me three times now... I
downloaded it yesterday.
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 04, 2005 12:56 PM
To: David Strout
Cc: support@pfsense.com
Subject: Re: [pfSense Support] ISO Images
letes that causes the USB
keyboard to start working...
Paul
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 04, 2005 1:54 PM
To: Paul Taylor
Cc: Chris Buechler; support@pfsense.com
Subject: Re: [pfSense Support] USB Keyboard on 73.2
All that i
0.73.4.1
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 04, 2005 2:09 PM
To: Paul Taylor
Cc: support@pfsense.com
Subject: Re: [pfSense Support] USB Keyboard on 73.2
What version? USBD was starting AFTER the script in an older version.
On 8/4
nd" in the uninstall?
- We have Advanced Outbound NAT enabled (with only the default rule) with
registered IPs on the LAN segment handed out via DHCP.
- We have only the default firewall rules in place.
Paul
-
To unsubscr
least
base64encoded for storage, so at least they would be as secure as the locally
managed passwords, native to pfSense and Monowall.
Paul
have to be in the code,
where it could be seen, so even that doesn't provide great security...
Paul
-Original Message-
From: Bill Marquette [mailto:[EMAIL PROTECTED]
Sent: Friday, August 05, 2005 11:01 AM
To: Paul Taylor
Cc: support@pfsense.com
Subject: Re: [pfSense Support] Fre
are pretty
out-of-the-way, but in most corporate environments, that just isn't the
case... People are crammed in cubes right next to each other, and they
might not even be doing related jobs.
Paul
-Original Message-
From: Bill Marquette [mailto:[EMAIL PROTECTED]
Sent: Friday, Augu
I was just trying to provide feedback, which I thought you wanted...
Paul
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Friday, August 05, 2005 11:27 AM
To: Paul Taylor
Cc: Bill Marquette; support@pfsense.com
Subject: Re: [pfSense Support] FreeRadius Package - s
drive once things were setup correctly.
Thanks,
--
Paul Haddad ([EMAIL PROTECTED] [EMAIL PROTECTED])
Trying to mount root from ufs:/dev/da0s1a
Manual root filesystem specification:
: Mount using filesystem
eg. ufs:da0s1a
? List valid disk bo
drive once things were setup correctly.
Thanks,
--
Paul Haddad ([EMAIL PROTECTED] [EMAIL PROTECTED])
Trying to mount root from ufs:/dev/da0s1a
Manual root filesystem specification:
: Mount using filesystem
eg. ufs:da0s1a
? List valid disk bo
nizing the partition
information?
--
Paul Haddad ([EMAIL PROTECTED] [EMAIL PROTECTED])
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Well I can't really boot to do a dmesg -a but these are the boot
messages. Just to be clear. I basically installed to the Microdrive
from the LiceISO CD, then mounted the micro drive and replaced the
kernel.gz with the one from the Embeded image. The change to the
/etc/ file didn't seem to make
On 3/13/06, Scott Ullrich <[EMAIL PROTECTED]> wrote:
> I am curious if the above is correct. What does it mount from when
> everything work? I don't have a unit handy to check atm.
The below is from a wrap booting a 128MB CF Card and then I did a PC
booting the microdrive over USB.
Note I've t
in the whypfsensesucks page I've read this:
FTP on multi-wans do not work w/ the FTP helper.
does that mean I cannot configure incoming ftp connections? or does it
mean I can only configure incoming ftp with one WAN interface?
Thanks
so maybe I've got my wires crossed (I hope)
is the ftp helper a daemon?
I already have an FTP server, and I want dnat WAN(n) -> ftp server
so:
inet-->wan1-->ftp server
ftp server -->wan1-->inet
or
inet-->wan2-->ftp server
ftp server-->wan2-->inet
Thanks for
2 questions
1. I changed admin access to paul/mypassword (just for your info :) )
I can't figure out how too enabled ssh
ssh [EMAIL PROTECTED]
ssh [EMAIL PROTECTED]
ssh [EMAIL PROTECTED]
all fail
I've tried passwords:
pfsense
pfSense
mypassword
I also can't find where to load
~$300 case/motherboard solutions? The only one I've found
is the minibox m200 but there's got to be some other solutions out
there using maybe newer/faster procs?
--
Paul Haddad ([EMAIL PROTECTED] [EMAIL PROTECTED])
-
To u
rdware
vendors, but I didn't see any US vendors with mini-itx solutions that
fit the ~$300 criteria.
--
Paul Haddad ([EMAIL PROTECTED] [EMAIL PROTECTED])
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-m
Marc,
On 5/10/06, Marc Eggenberger <[EMAIL PROTECTED]> wrote:
Hi Paul.
I use pfSense on a PC-Engines WRAP with 3 nics. Works great.
http://www.pcengines.ch/wrap.htm
you didn't supply requirements so I dont know if this is sufficient.
I want a mini-itx solution because I wante
Vivek,
On 5/10/06, Rainer Duffner <[EMAIL PROTECTED]> wrote:
Vivek Khera wrote:
>
> On May 10, 2006, at 1:48 PM, Paul Haddad wrote:
>
>> 2k+ connections and 15Mbps down at the same time.
>
> these boxes have been clocked at > 30Mbps and have 128MB of RAM, so
> s
asing the number of connections
decreased the overall throughput.
Again my assumption is that increasing the number of connections is
going to increase the CPU usage which will in turn decrease the max
throughput. Is this incorrect?
--
Paul Haddad ([EMAIL PROTECTED]
like $340 for a case, motherboard and 3 port gigabit. The
mini-box.com M200 is a bit cheaper but comes with an older, slower CPU
and doesn't have gigabit ports (though I think that Phylon board would
work on it).
--
Paul Haddad ([EMAIL P
On 5/14/06, Holger Bauer <[EMAIL PROTECTED]> wrote:
Sounds like a heat issue to me. What happens if you remove the topcase so the
heat can go away?
I didn't have the top case on at all. Is there some way to tell
exactly why it crashed?
--
Paul Haddad ([EMAIL PROTECTED] [EMAI
when doing the test again.
Is the LM77 accessible under freebsd? Looks like at least openbsd
supports it but I don't see any way to get at it under
pfSense/freebsd.
--
Paul Haddad ([EMAIL PROTECTED] [EMAIL PROTECTED])
-
To
.php/products_id/542
http://www.logicsupply.com/product_info.php/products_id/495
http://www.logicsupply.com/product_info.php/products_id/502
--
Paul Haddad ([EMAIL PROTECTED] [EMAIL PROTECTED])
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For ad
. how do I fix it without starting all over again ?
Paul.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
I would love to however with this rule in I have no access throught
the web config
is there another way?
On 23/05/2006, at 2:33 AM, Angelo Turetta wrote:
Paul Willard wrote:
I added a few rules while building a new pfsense embedded box
nat wan:80->lanIP:80
nat opt1:80->lanIP:80
na
rns 192.168.1.2
when it should return 203.96.212.68
something dodgy going on? or something mis-configured?
Thanks
Paul.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
tracked down the problem.
I had an error in my rules which caused them not to load.
With no rules loaded the dnsmasq was forwarding requests from the out
side worl.
All fixed
on to my next problem :) (se next email)
Paul.
Bill Marquette wrote:
Why are you sending DNS queries from
Can somebody explain how to use static route
I want to static route everything to a certain IP out via opt1
in the linux world
route add 210.55.105.82 gw 203.96.212.1
how do I do this in pfsense?
is the interface field the out interface or the in interface?
Paul
yeah I can see that.
what I'm asking is what does the interface field mean?
Scott Ullrich wrote:
On 5/28/06, Paul W <[EMAIL PROTECTED]> wrote:
Can somebody explain how to use static route
I want to static route everything to a certain IP out via opt1
in the linux worl
ce which
has a gw of 203.96.212.1
Paul.
Scott Ullrich wrote:
On 5/28/06, Paul W <[EMAIL PROTECTED]> wrote:
yeah I can see that.
what I'm asking is what does the interface field mean?
It is for directly reachable type of situations. You most likely
don
Perfect . .thank you
It appears to be the in interface. You should open a bug report for the
help text of System->Static Routes, because it's not saying that.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional comm
[ste3 (00:0d:88:68:7a:f3)] delete interface
WAN is a pppoe connection with a static IP
Any help appreciated :)
Paul.
Firewall: NAT: Port Forward: Edit
Interface [WAN_]
Choose which interface this rule applies to.
Hint: in most cases, you'll want to use WAN here.
External
yes it did help .. thanks
rules updated, and everything works as expected
sweet.
now to figure out outgoing load balancing :P
HTH,
Volker
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EM
; | sed "s/WhatIsMyIP.com\ -\ //"
202.37.230.93
I would expect the ip to change every now and then .. but it has
never changed
Can some one point out what I am doing wrong?
Thanks
Paul.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
gee I spent all that time formatting so it was readable . .
http://forum.pfsense.org/index.php?topic=1329.0
there's a more readable version of the email.
Paul.
On 30/05/2006, at 1:31 PM, Paul Willard wrote:
Yeah I know, I know .. RTFM ... I read everything can't fig
ally tried
using the same card to boot a Via mobo with a IDE-Flash adaptor and
got the same result.
I think the Hitachi micro drives work fine, but unfortunately these
Seagates do not.
I'd love to be proven wrong...
--
Paul Haddad ([EMAIL PROTEC
Thanks guys,
I've also been inform that a new release is pending,
so I will wait a few days, and try with the new release
Paul.
Bill Marquette wrote:
Per the forum he's running Beta 2. He's been advised to upgrade to
the latest beta as there were numerous load balancer fixes
some kernel hacking...
I guess this is the reason the Hitachi drive is 50% more expensive,
probably has a little extra bit of hardware to make it more like an
IDE drive which freebsd expects.
--
Paul Haddad ([EMAIL PROTECTED] [EMAIL PROTECTED])
--
uld only help on the first
portion of the boot process, prior to drive mounting and since that's
working fine I think the problem is elsewhere.
--
Paul Haddad ([EMAIL PROTECTED] [EMAIL PROTECTED])
-
To unsubscribe, e-mail: [
oot-up.
I tried this card on a C7 based board and no go. I used a fairly fast
2GB flash card and it booted no problem. I think this card in
particular can't handle DMA but even disabling DMA causes some issue
with freebsd.
--
Paul Haddad ([EMAIL PROTECTED] [EMAI
you can set
hw.ata.ata_dma
at the bot prompt. I actually think its already setup like that on
the embedded images.
--
Paul Haddad ([EMAIL PROTECTED] [EMAIL PROTECTED])
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional comma
7-02-07 16:39:22: DEBUG: db :0x80bbe08: 10.0.20.22/32[0] 10.0.20.0/24[0]
proto=any dir=out
and the only messages after this are DEBUG: msg 1 not interesting
finaly netstat -sn on the new FW pair shows all the counters in the
fastipsec:
ap:
and esp:
sections as being O
I don't know what els
16.2.207-1
but the content of that page is entirely the same as the "Top 20" page. I
don't get any more specific detail about that IP.
Are these due to some misconfiguration on my end or are they bugs or what?
Thanks.
Paul
I can do that. I installed RC1 at home last night and I like it a lot but
this other system is in a production environment. Given that, would you
consider RC1 stable enough to deploy?
On 7/24/07, Scott Ullrich <[EMAIL PROTECTED]> wrote:
On 7/24/07, Paul Brown <[EMAIL PROTECTED]>
Will do then. I'm going to be changing out some UPS's soon (if they ever
get delivered) so I'll do the upgrade then.
Thanks for the endorsement of RC1.
Paul
On 7/24/07, Gary Buckmaster <[EMAIL PROTECTED]> wrote:
I hear this question come up just about every day and fra
Bill Marquette wrote:
> It's worth noting that pfSense does this by default. Some IPSec
> concentrators also expect the udp traffic to source from port 500 and
> won't allow connections from arbitrary ports (Nortel Contivity is such
> a beast). And yes, it means we can only handle one ipsec conne
p
1 No15 Kb
qHogDown
Bandwidthd reports for 172.16.2.50 today:
Peak Send Rate: 553.2 KBits/sec
Peak Receive Rate: 4.4 MBits/sec
Do I have something set wrong? Any pointers would be muc
I'm not sure if this is supported natively, but it seems like you
should be able to use an "include" to get the job done. I found a
description here...
http://ask-leo.com/how_do_i_include_one_html_file_inside_another.html
Scroll down to "CGI Includes".
Paul
On 7/29
Paul Brown wrote:
> I'm using pfSense to try for some fairness in sharing a DSL connection
> for a 78 unit apartment building. I've got one resident doing
> something that creates periods of heavy upload that run the latency up
> into the 200-600+ range.
do you have a manag
on for openvpn clients; if
I do create a rule for ipsec it "disappears", as there's no tab for that
"interface".
thanks very much
Paul
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Paul M wrote:
> I've been able to establish an open vpn tunnel between a pfsense
> 10.2-rc1 machine at work and my linux box at home (which uses an ADSL
> modem/bridge and has a static IP).
> 10.0.0.0/24--lan--PFSENSE ~~~ LINUX--lan--192.168.0.0/24
...
> If I run "tcp
Paul M wrote:
> I rebooted pfsense because I'd been doing a lot of hacking about, and
> tried again.. no better luck but now when I ping on linux box I get this
> appearing from tcpdump on pfsense:
>
> 13:23:40.596976 IP15 bad-len 0
> 13:23:41.751325 IP15 [|ip]
> 13:
Chris Buechler wrote:
> Paul M wrote:
>> I'd still like to know how to set up rules to control the vpn client
>> access.
>>
>
> You can't yet (it's on the improvements wish list hopefully for the 1.3
> release).
ah, so if I did want some sort
Paul M - No, our switches are not managed, unfortunately.
Daniel - No, UPNP is not enabled.
Any other thoughts?
Paul
On 8/6/07, Daniel Lloyd <[EMAIL PROTECTED]> wrote:
>
>
> On 8/6/07, Paul M <[EMAIL PROTECTED]> wrote:
> > Paul Brown wrote:
> > > I'm
I have the same problem. You have to go to Status - System Logs -
Portal Auth. From there you can cross reference the IP to the
username.
A bit of a pain, but it gets the job done. The next time I have to
reboot the firewall, I'm going to change my IP numbering scheme so
that my usernames (nume
'VLAN 2 on em1" which is correct.
Perhaps this is documented in some howto/faq, but it's definitely
confusing to someone relatively new - coming from linux where you'd have
(say) eth0.2 as vlan-tag-2 and eth0.5 as vlan tag 5,
Siju George wrote:
> > So it is pointless to take different ISPs for redundancy right?
> > Because if the BT ADSL line goes down then everything suffer from it?
not necessarily, but you'd have to choose your ISPs carefully to ensure
that they used disparate routing, if one were BT, the other woul
Tortise wrote:
>>> Buy hardware that's not faulty. pfsense is *way* more robust than what it
>>> seems to be for you. what network interfaces do you
>>> have? if other than broadcom or Intel, switch to Intel.
>
> In frustration I have purchased 2 new Intel Pro/1000GT NIC's. They have
> last
Jonathan Wanak wrote:
> Hi everyone,
>
> This problem has stumped me for several weeks now: I can't get caller ID to
> work behind my PfSense router. I used SunRocket before they went bankrupt,
> then switched to ViaTalk.. Caller ID on the new Linksys PAP2T refues to to
> work behind the fir
Sonny Sarai wrote:
> Hello,
>
> I am running pfsense 1.2-RC2. I am new to pfsense. Nobody inside the
> network can send attachments over 48Kb if the filters are enabled in
> advanced settings. If I check off the check box in advanced settings, I
> can send well over 48Kb.
that's an odd size to ca
willing to write a tutorial on this for
http://www.pfsense.com/index.php?id=36 ? It seems like this would be
useful to a number of people.
Thanks
Paul
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-ma
Thanks Tim - I was connecting the AP's WAN port to my OPT1 interface.
Once I changed that, it worked better. I'm still having a few
problems but I think I've narrowed them down to a defective AP.
Paul
On 8/31/07, Tim Nelson <[EMAIL PROTECTED]> wrote:
> Paul-
>
> R
Hoos, Stephen wrote:
> work fine as a router/switch. Your picture is a little confusing
> download “network notepad” and redraw your topology.
I think the problem was he drew the diagram with fixed-point font and
then html-emailed it so it will look different.
it's best to send only plain-text
Olaf Klein wrote:
> Hi,
>
> I try to setup some restricted openvpn connections with pfsense 1.2rc1,
> but found no way to setup packet filter on these connections. Is it not
> possible
> to setup packet filter for openvpn connections?
no, sadly not in the current releases, it's planned so I'm
s to networks at the other ends of the tunnels
because I don't know in advance which firewall the tunnel will "come out
of".
Is there a better way to achieve this, i.e. can the firewalls
synchronise vpn setup and state in some way?
thanks
Paul
-
Sonny Sarai wrote:
> But, as soon as I turn off the firewall in "Advanced -> Disable
> firewall", I can send attachments > 150KB. I love using PfSense and I am
when you say "send attachments" what precisely are you tryign to do?
Sorry, I haven't kept previous posts in this thread.
it's just a tho
1 - 100 of 585 matches
Mail list logo
