to get any missing info out into the open.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests...
--
e modules in-tree and build them.
paul- ,
you are assuming 64 bit , but 32 bit only would suffice for a test. just
to see if it can be stable with the filesystem in ram like tiny core.
But indeed wireguard is coming to new kernels , so that is a path too.
M-H
Pi based multi-room audio system
d way.
But still, if you really want it , it might be possible, and do not let
me discourage you .
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat
developping
software
Anyway it is a test first of all, so if it needs to run on a pi 2 or
less and proves to be functional, we can decide on improvements later
on.
In the meantime I have started a test with a regular linux distro to
host a secured LMS.
Regards M-H
Pi based multi-room audio system
indeed in kernel is probably going to take quite some time, but would it
be feaseble to generate a userspace version like ubuntu, andoid and
windows are using now ?
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio C
nel.
https://itsfoss.com/linux-kernel-5-6/
So I assume it is not impossible or extra difficult to get it working
with pcp.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a
M-H wrote:
>
> It might be like pointed out 'here '
> (www.raspberrypi.org/forums/viewtopic.php?t=245931)
I had a FEW disks not working OKE with UAS ,
and by disabeling UAS in the new xHCI driver ( default with Pi 4 and
USB3 disks ) I got my disks to perform more reliabl
apparently I was too eager to exclude HW ussues.
from dmesg:
Code:
[ 57.835410] Finished piCorePlayer v6.0.0 startup.
[ 70.502758] usb 2-1.2: reset SuperSpeed Gen 1 USB device number 3 using
xhci_hcd
[ 115.882697] usb 2-1.2: reset SuperSpeed Gen 1 USB device n
powered hubs ?
It seems the disks are not reset, but i am not sure this is true and how
I can determine it.
Suggestions and solutions are welcome.
( Perhaps I should boot and reboot another linux distro to see if this
is HW or PCP related. )
M-H
Pi based multi-room audio system powered by
use:
https://nl.aliexpress.com/item/490445972.html?spm=a2g0o.productlist.0.0.781c3dc4ETvPo8&algo_pvid=1b88a38e-e125-4e32-94a9-a0d94e41c8e9&algo_expid=1b88a38e-e125-4e32-94a9-a0d94e41c8e9-5&btsid=0b0a0ac215841208386696526e34a8&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
s changed that will influence pcp running or booting on a
Pi4
- it is only the ability to power the rpi4 from pd compliant power
sources ( apple chargers , notebooks )
i.o.w. the fix for the known power issue that was introduced with the
rpi4
M-H
Pi based multi-room audio system powered by PiCor
or the piCoreplayer team do to get this board revision
supported ?
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat
a music player.
Perhaps you can find a way to setup the communication with fewer pins,
and free up the I2S pins for a dac.
Personally I would rather use the HDMI-out of a pi to drive HQ displays
than to use USB for a DAC.
But I wil certainly look forward to your posts regarding this display.
ng and extracting connectors
does help.
'Popping connectors' a few times is a wel known fix when debugging
computer hardware problems.
Especially when using old stuff.
Another mistake I once made was to put the hat on wrong , with just 1
row of pins.
Obviously reconnecting it again ( c
's
With a dac, sound quality at low levels is noticeably beter than the
software dac in the pi.
This enables you to reduce volume of the pi, and do not need to grab a
remote IR controller for that.
Good luck, M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-d
ndeed the right
way to make a short connection.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests...
-
t set including batteries is
not an of the shelf product .
But I find it very comfortable to use dedicated hardware buttons , and
it could double up as headphone player.
Let us know what you decide.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch
paul- wrote:
> I don't think a new image will fit. Default images are 64MB boot, 64MB
> user. And that is real MB, and the card is probably 128 MegaBits.
Indeed, the card is just a bit less than 128MB.
I will try and fiddle with partition sizes, and see if it can fit a
basic pla
I am sad that this card has reached its limits. Progress has its
price.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests
then 7 seconds is to fast of you see something
interesting. But present a manual return button to indicate the page is
no longer updated with emerging info.
BTW many THANKS for all the new versions.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a
OKE Chill, here is the Dutch input:
# SLT: QVGA refers to the "quarter VGA" resolution of the display
EN QVGA 240x240 Square Skin
# NL QVGA Landscape-skin
NL QVGA 240-Vierkant-skin
LABEL_ADJUST_BRIGHTNESS_GENERIC
# EN Backlight Brightness:
use it , and see the limitations and results of edits I
make.
I have not dissected jivelite before, but have average linux and vi
skills.
Regards, M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi
ps, easy efficient and enough for
lots of deployments.
But it might not be enough sound while driving you camper.
It helps to power them at the max voltage of 5,5 Volts with decent wires
and capacitor.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi
Chill wrote:
> I clearly have some testing to do, but it looks as though this could be
> an issue with the HiFiBerry device? What output device are you using
> M-H?
I use the generic TI5102 driver, but let the installation of the
equaliser and the als modifications to the GIU scrip
As there were multiple difference, I swapped out my /etc/asound.conf for
yours. And still I can use the equaliser.
What output device does your squeezelite use?
Code:
ps | grep squeezelite
M-H
Pi based multi-room audio system powered by
lib/ladspa/caps.so"
}
pcm.equal {
type plug;
slave.pcm plugequal;
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Ci
chill wrote:
> 'Test' doesn't change the sound. If I then save and then backup and
> reboot, the equaliser settings survive the reboot but they don't make
> any difference to the sound.
I agree with Paul, it should work. I will get my set and test on the
prop
osts. How does this pirate
audio 3w board compare to that amp on 5 volts ? ( use the same speakers
to make it an honest compare )
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , a
-br]
Not too much processor intensive
So it must be IO related . Perhaps the screen updates .
Anyone who can confirm and or explain ?
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card
u wait for an other iteration.
When it reaches 0 it will end, but perhaps with the wrong message.
So at PIGI=1 message 'waiting did not work out' deduct one more and
exit.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ w
'full rebuild' it was just this tweak I
needed.
THANKS! M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a
really tell.
And I found 'this one'
(https://www.aliexpress.com/item/32970035492.html?spm=a2g0s.9042311.0.0.78db4c4d0fRGyq)
interesting to get going as a user front for a musicbox. But it might
take another week or so.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B
1580158957.1799 3 sbpd.c,202: Could not connect to pigpiod. Is it running?
Perhaps it is time to flash the SD again, and use the latest.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
P
chill wrote:
> Excellent - thanks for the update. Just M-H to hear from now!
Sorry, had to fix a powerboard with smoke-signals , without power no
LMS to connect to :-(
Just verified the version of my 3W board, no indication what soever.
Manually checked connections for button x and y t
eriod.
You might know it already, what does need to be altered ?
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests...
--
chill wrote:
>
> I'm still often getting 'Analog' in the 'Audio output device settings'
> of the Squeezelite page.
I can second that. I saw that too.
Now on the brand new zero-w with actually no real differences.
But the starting moment of "/home/tc/sbpd-script.sh" seems to have
impact.
It d
--
I have to google what it could be, does not ring any bell to me.
I need to get going on that zero W for a proper test rig on a location
where I can also a console connected at the same time.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch
exact as from memory but;
top showed about 85 to 75 processor time free.
Usage = 11% squeezelitelite while playing + about 10 percent for SBPD
and or jivelite.
But since it is polling buttons and serially outputting an animated
screen, I though it to be somewhat normal for such a small processo
, and it
restored everything.
I will solder a header, and move to a zero W to get rid of the external
dongle, and issue ( hopefully )
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero wit
and enjoying the music.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests...
M-H
Grumpy Bob wrote:
>
> Looks to me as though the issue is the execution of sbpd-script.sh
> Robert
Indeed, I removed ( uninstalled ) pcp-dbpd.tcz, and have jivelite back.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ wi
te... (7 minutes and counting)
Hmm, What can pcp-sbpd.tcz do that stops the display ?
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , a
back to square one without properly
> understanding what the problem is. I'd like to get it working, as it was
> very nice!
>
> Robert
I had the same illuminated black screen, and thus wondered if I could
see illumination variances from the pin 13 settings.
But I did start over on a n
the pla is thin and somewhat flexible, you could cover it .
But use long slits to allow it to flex.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few
screen.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests...
M-H's Pr
to reboot hard .
It still plays sound nicely, and network is OK but no screen anymore.
I sure hope the broken thing is software, else it would be a very short
experiment:eek:
Lets start with a cup of coffee and a fresh SD-image
M-H
Pi based multi-room audio system powered by PiCorePlayer
chill wrote:
>
> Just a thought - have you configured Squeezelite to use the HiFiBerry
> DAC Zero/MiniAMP?
No, I standardise on the Generic/simple TI5102 DAC, as it will work with
the 'phat beat' and 'phat dac' ,and this pirate audio board without
issues, so I can swap boards and sd-cards
( I
chill wrote:
> Good stuff - it'll be good to get another tester on board!
>
Mine arrived today, and it's playing already ( 3 watt version ).
Jivelite does display, but no buttons jet, need to read what you advised
for sbpd.
M-H
Pi based multi-room audio system powered b
raints.
TOP!
With jivelite working it opens up the use of these kind of displays on
other project too.
Like squeezeamp; I just verified they have a spare SPI.
I wonder how long it will take them to show pictures like you presented.
;-)
M-H
Pi based multi-room audio system powered by PiCorePlay
an amp,
but is is a start for open documentation. And the github info has not
been explored jet.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a f
ons to do a rough examination of disk
throughput.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other
hen the touch pen, and then the volume
slider.
So I recon the hard buttons will be much more useful in those first
seconds of my personal boot sequence.
But YMMVT, everyone has its own preference. :-)
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Raspto
multimeter, as I created the right adapter cable.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests...
-
hout their DAC , and thus a separate
powerboard with the LDO to power my pi.
If I remember it correctly , it has an output to signal the pi to start
a powerdown sequence , and an input to sense when the pi is done with
all that.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
carsten_h wrote:
> Can someone imagine why the Pi 4 is so slow here?
First thought a power issue preventing your USB stick to work properly.
I know it is something not all of us want to admit, but power shortage
it is really a very common cause for ill working pi stuff, especially on
the USB s
existing software.
More Later, M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests...
M-H&#
e you a faster solution than writing something new.
'Jivelite-on-a-Pirate-Audio-240x240-screen'
(https://forums.slimdevices.com/showthread.php?111502-Jivelite-on-a-Pirate-Audio-240x240-screen)
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Raspto
z in the piCore repository. I loaded it , and it
works.
The question that remains is how to know what extension is needed.
screen->screen.tcz is an obvious one.
But sometimes it is something in some kind of tool collection, and
currently I have no index to the content of these extensions.
M-H
P
ed to
connect and configure I can *finally* update my in-between-hat and pull
out some pins for this functionality.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and
ons in the repository ?
T.I.A. M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests...
M-H
for about half the price of the audio card.
It is presented as a game console add-on but depending on its GPIO usage
it might be used in more situations.
So jivelite on this resolution might get more usage.
I'll order one, and in a month or so I can test that board too.
M-H
Pi based multi
I had must have been due to the files I made using several
windows tools.
So now I have to scrub the library and push the new .oggs to my car.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-b
ay on an old android phone, but that is not a real quality
check.
Let me start by scrapping all old ogg files and recode them
Thanks for the thread link, it does match most of my wish list.
Regards, M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Raspto
paul- wrote:
> Have you tried the latest version in pCP? It is linked with libogg and
> libvorbis. Bu I know those mixed formats are quite odd sometimes.
Yes I have:
using pcp6b7 and to my knowledge currently no update possible with: Main
page : squeezelite - update or full update.
And the F
s question is what software support there is already, in the
newest/upcoming versions.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few o
, as I do not want to do highres audio in my car.
So is ogg-vorbis natively supported in squeezelite ?
Can LMS pass the files/streams without on-the-fly re-coding ?
What windows and linux based tools and settings should I use to re-code
to issue free files ?
T.I.A. M-H
Pi based multi-room audio
it a pcp6 bug we need to investigate? I did uninstalled jivelite and
reinstalled it through the gui when I searched for the previous skin
issue.
T.i.a. M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi
Paul,
Not exactly sure wat you mean with pcp-update, but i will try and see if
I can get it updated on a pi4.
I just start a new PCP 6b7 image on a pi4, and then tinker with the GUI
till the right drivers come down from the repository, so I can switch
from wired to wireless.
Regards M-H
Pi
you can get the current
setting visible in the first view.
Ik know, difficult if there are many skins and small screens at the same
time.
And I know ralphy is trying to keep it as close to the original design.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with
view ?
T.I.A. M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests...
M-H's Profile:
assume it is enough for some audio to
pass, and close to normal values I get out of it with laptops.
For me this is about all I can test on a saturday night, and with my
experience in Iperf3
I guess the device/driver combo is stable.
Shall we do the pi4 test ?
Regards M-H
Pi based multi-room
5.0.1 ?
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests...
M-H's Profile:
your pcp ) , and use sftp ( F9 and
right or left panel and login ) to copy from Linux to linux.
If you want to stay on the CLI, think about wget too.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Z
thread:
https://forums.slimdevices.com/showthread.php?107329-Cirrus-Logic-Audio-Card-and-Wolfson-support-in-PCP-3-20
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a
ity we can zoom in on the
issue at hand.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other te
laying at volume 0 ) for over 24 hours.
Personal time is scares here, else I would have tested the 3B too.
There is little chance the driver does work different to the 3B+, but
we'd better test than assume.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with
Linux
Tested with an other USB dongle separately and together , both those
situations do load drivers and a working wifi connection, except for the
RTL8188fu
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+
) ? As
it would be difficult to explain users to either install the one or the
other based on the pi they use.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other
thout
issues, and sound is as if there was no upgrade.
Tested the same sd in a 2B, and no fun. I assume only armv6 at this
stage.
Please let me know what tests you would like me to do.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+
h can not be routed between the 2 subnets.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few
Thanks Paul,
Perhaps a noob question , but how do I correctly add a tzc manually ?
The .list file does not make sense as a script.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with
LAN's ,
seems technically more accurate but unnecessary for PCP ( imho )
So I wil see I can test it with my DHCP and NTP server. next year !
Regards , M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Car
hat is possible. Looks like something fun to
investigate.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other
ogic-Audio-Card-and-Wolfson-support-in-PCP-3-20
Yesterday I tested the PCP6.0.0 B7 on my production set ( B+ and CLAC )
and the menu's allowed me to get the card setup in 5 minutes.
So there is little risk these cards do not work for you.
If I only had a compatible pi 1 .....
Regards M-H
Pi b
Marsupial wrote:
> That's interesting. Where do we get this dac?
I got mine from AliExpress, it is a steal :
https://www.aliexpress.com/item/33061919226.html?spm=a2g0s.9042311.0.0.27424c4dOxhXYk
( more weeks to wait than euro's to pay. )
Regards M-H
Pi based multi-room audio s
it is really
a bug we can fix it in the 6 version.
If it is a non-documented feature, please fill me in.
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus
btw, an insitu upgrade from 6.0b7 to 6.0b7 does break things :-) ,
tomorrow , a new day, a new image flash etc.
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests.
read cmd failed...
[ 914.241368] RTL871X: fw read cmd failed...
[ 914.242436] RTL871X: HwRateToMRate(): Non supported Rate [ff]!!!
wasn't there a diag / debug log upload feature in PCP ? might be useful
to test that too.
M-H
Pi based multi-room audio system
2B, 3B , 3B+, 4B
And the for-mentioned zero's 1.2.1.3 and W
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests...
I can test the external wifi on a zero-W for that final
test ?
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few other tests
er/alarm with a clock and volume buttons.
( perhaps we should better start a fresh thread and link it , this is
the v6beta thread)
Regards M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat
on )
I saw this driverset is called rtl8188fu although that is not a name for
a realtek chip.
Am I right ; the support would be on the pCP 6.0.0-b7 only ? but both 32
AND 64 bits ?
What exact tests would help for PCP ?
lets see if I can get it working on a few pi's.
Regards M-H
Pi based mul
s at boot time, rather than dynamically.
This I did not understand , and as I did not need it, I can't trial and
error to it.
It is not a cli command but do these go into one of the 3 user commands
at the bottom of the tweaks tab ?
Regards M-H
Pi based multi-room audio system powered by
wired nic.
I remembered to get net-usb installed to recognise the hardware but on
this 6.00.B1 attempt it did not work.
Perhaps the repository version isn't matching this build?
Can anyone remind me on the correct way to install USB nic support?
TIA M-H
Pi based multi-room audio system po
paul- wrote:
> I'm not good enough with alsaconf to direct audio through 2 different
> plugins.
I will investigate in the coming week, and see how such could be done.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with C
the overal performance.
YMMV but this is a real upgrade.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few
install the equalizer , reboot, set analogue, reboot, test
output, and then move on with another output.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a few
could have prevented the diskspace to
run out , and come up with some alternative like a reasonable message.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , a
after I mounted that manually it continues
to warn about it.
Is this an error in the software of is the error between the screen and
chair ? Anyone got it up and running on this beta and a pi4 ?
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi
y DHCP server response.
Anyhow, it is not a complaint :-) just feedback.
Thank you for the quick start on the pi4 development.
M-H
Pi based multi-room audio system powered by PiCorePlayer(s):
Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card,
Pi Zero with Phat-beat , and a fe
1 - 100 of 191 matches
Mail list logo
