Tony wrote:
> The Clark Zapper delivers a 9volt, unipolar, high frequency signal ... 
> 
> The Beck unit delivers 27volts, bipolar, (effectively 54 volts, ie
> +27v to -27v =54v)

I've got no problem with anything else you're saying, Tony, but this 
raised a question...

The Clark unit basically switches the output on and off at the pulse 
rate. The Beck unit is "always on" but the polarity switches at the 
pulse rate, correct?

I don't see 54 volts coming out of it, except as a transient, 
perhaps, at the beginning of each half-cycle, when the body's 
charged up capacitance is in series with the now reversed voltage.

The waveform I'm visualizing, if you attach one paddle to the 
oscilloscope ground and the other to a channel input, is a 54v peak 
to peak square wave, yes.

If you reference your signal to, say, an electrode on the person's 
body midway between the electrodes, I would expect to see a 27 volt 
p-p square wave, with perhaps a higher voltage spike at the leading 
edge of each half cycle. Or perhaps use a dual channel scope and view 
A-B with ground attached to the person's toe!

Can you straighten me out, please?

Mike D.

[Mike Devour, Citizen, Patriot, Libertarian]
[[email protected]                        ]
[Speaking only for myself...               ]


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>