Dual Interlock Pre-Action? For one head in a closet? YIPERS!
Craig L. Prahl, CET Fire Protection Group Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [EMAIL PROTECTED] http://www.lg.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom Duross Sent: Thursday, April 05, 2007 3:01 PM To: [email protected] Subject: RE: Server Closet DIPA?? In my best Sherman: "Gee Mr. Peabody, what's that?" Tom Sounds like they're concerned with water damage and not mission continuity. I would recommend a DIPA system. Either way, it seems like a lot of effort for one sprinkler. Inergen would likely require pressure relief venting. Ray Schmid I was wondering if I could get recommendations of advice to give a client. Their IT guy is bugging them about a head we put in a server closet. It's just a 6' w x 3' deep closet with their rack and a little ductless ac unit. No raised floor, liebert or big ups equipment and certainly not sealed. I offered high temp head but they're scared about water (wata). Should I suggest total flooding inergen? Low temp rate of rise heat detector? I have to have an exhaust system installed with inergen, right? I think they'd have to enclose the closet to keep in the gas. Thanks, Tom Duross Go Red Sox _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
