Just a thought....... We have had previous success with the following methods:
1. Install a smoke detector within this space for an early warning alarm signal prior to the activation of the 360 degree head, OR 2. Install an air sampling system and control panel for the room, along with the 360 degree head. The air sampling system (AnaLaser, VESDA, etc)is a very sensitive detection system and gives an alarm condition way far earlier than the common smoke or heat detector. When we used this method, our sprink-head temperature was no higher than 212 degrees. Loren Johnson - CFPS, CET Fire Protection Systems Consultant Marquette Heights, IL --- Tom Duross <[EMAIL PROTECTED]> wrote: > I was wondering if I could get recommendations of > advice to give a client. > Their IT guy is bugging them about a head we put in > a server closet. > It's just a 6' w x 3' deep closet with their rack > and a little ductless ac > unit. > No raised floor, liebert or big ups equipment and > certainly not sealed. > I offered high temp head but they're scared about > water (wata). > Should I suggest total flooding inergen? Low temp > rate of rise heat > detector? > I have to have an exhaust system installed with > inergen, right? > I think they'd have to enclose the closet to keep in > the gas. > > Thanks, > > Tom Duross > Go Red Sox > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email > to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) > ____________________________________________________________________________________ Get your own web address. Have a HUGE year through Yahoo! Small Business. http://smallbusiness.yahoo.com/domains/?p=BESTDEAL _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
