Wouldn't the pressure limitations of PEX be close to exceeded with a 120 PSI pump? Obviously we don't know if that's BOOSTING A 50 psi static or anything, but CPVC and PEX are both limited by temp/pressure ratings less than conventional UG materials. Certainly, there are applications where both of these should work- although I've never used pex for anything, can't offer any pros or cons..
Last week Mark and Ron from Aero discussed the high temps of UG water in the desert installations they encounter (at the SprinklerForum Reception), along with the residential seminar James gave mentioning pressure/temp limitations of the two plastic materials mentioned. Those who missed the AFSA Convention missed some great seminars, in addition to the chance to see old and make new friends. Oh, and there were a few booths in the Exhibit Hall :) where you can talk to the factory reps (usually) about problems, such as the fastest acting PRV I needed for PLD inrush relief; spring-loaded is faster than pilot-operated. glc -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Cabral Sent: Thursday, October 04, 2007 9:41 AM To: [email protected] Subject: Re: Underground Material I don't want to appear self serving however, PEX is approved for underground through 2" Here is a link to Rehau. http://www.rehau-na.com/index.shtml -- Mike Cabral the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
