If the rest of the system is CLDI it would be simpler to just run a 4"
CLDI run-in to the building and be done.  Then no special adapters or
fittings and no need to buy a small qty. of some special material.  

Keep it simple.


Craig L. Prahl, CET
Fire Protection Group
Mechanical Department
CH2MHILL
Lockwood Greene
1500 International Drive
PO Box 491, Spartanburg, SC  29304-0491
Direct - 864.599.4102
Fax - 864.599.8439
[EMAIL PROTECTED]
http://www.lg.com


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Thom
McMahon
Sent: Thursday, October 04, 2007 10:31 AM
To: [email protected]
Subject: Re: Underground Material

Many water authorities are now using HDPE (High Density Polyethylene)
pipe instead of copper underground. Anyone that's tried to un=roll 2"K
copper knows how often it kinks, deforms, and is just plain difficult to
work with. 
Contrary to popular belief copper does corrode. HDPE maintains its
integrity long after copper would have been replaced. Pure core is just
one brand we see a lot of, AWWA C-901, and  ASTM (Various approvals)

Thom McMahon
Firetech, Inc.
2560 Copper Ridge Dr
Steamboat Springs, CO 80488-2136
Tel: 970-879-7952
Fax: 970-879-7926
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, October 04, 2007 7:23 AM
Subject: Underground Material


> We have a situation where we need to put sprinklers in the guardhouses
at
> the entrances to a larger manufacturing facility. The one guardhouse
will
> have 6 heads and the other 4. We would like to supply the buildings
with 
> 2"
> underground. With the exception of copper what are my choices for an
> approved 2" underground pipe material? The project is located in MA.
>
> Matthew Drewello, PE
>
> Fluor Corporation
> 100 Fluor Daniel Drive
> Greenville, SC 29607
> ------------------------------------------------------------
> The information transmitted is intended only for the person
> or entity to which it is addressed and may contain
> proprietary, business-confidential and/or privileged material.
> If you are not the intended recipient of this message you are
> hereby notified that any use, review, retransmission, dissemination,
> distribution, reproduction or any action taken in reliance upon
> this message is prohibited. If you received this in error, please
> contact the sender and delete the material from any computer.
>
> Any views expressed in this message are those of the individual
> sender and may not necessarily reflect the views of the company.
> ------------------------------------------------------------
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
>
> To Unsubscribe, send an email
to:[EMAIL PROTECTED]
> (Put the word unsubscribe in the subject field)
> 

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email
to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to