I thought it was an existing building. . . if it is new and under construction then you have a point.
ps: With over 1 billion ft of PEX installed I would not consider it oddball. Let's all play nice. Mike Cabral ---- [EMAIL PROTECTED] wrote: > HUH? > > They are designing a manufacturing facility with two guard shacks. This > ain't no Motel 6 project or Burger King. If the entire system is CLDI > then why go off and by a few sticks of some other oddball material for > two run-ins? Equipment is already on site more than likely digging > trenches for miles of other underground utilities so no additional cost. > Doubt it will be a wet tap either as this is probably part of the > overall construction program. So adding a few extra sticks on the DI > order will most likely help the overall discount then having to buy a > small qty of some oddball stuff from another supplier. > > And fyi, spoke like a contractor, not just and engineer. > > > Craig L. Prahl, CET > Fire Protection Group > Mechanical Department > CH2MHILL > Lockwood Greene > 1500 International Drive > PO Box 491, Spartanburg, SC 29304-0491 > Direct - 864.599.4102 > Fax - 864.599.8439 > [EMAIL PROTECTED] > http://www.lg.com > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Thom > McMahon > Sent: Thursday, October 04, 2007 12:05 PM > To: [email protected] > Subject: Re: Underground Material > > Spoken like an engineer, that has no cost relationship, between what > they spec. and what it will cost. 2" wet tap vs 4" wet tap, lets see > there's 2 grand. 4" DIP vs 2" HDPE there's another 3 grand for say 200 > LF, Track hoe vs back hoe, 12" vs 3' wide ditch ----- It just keeps > adding up and since it's not your 10 grand, we only spec it because it's > what we always use. > > Making fire sprinklers affordable, as well as reliable is everyone's > job! As long as we treat cost as "Someone else's problem" they will > continue to resist putting in systems, because "they are too expensive" > Adding 10 grand to a job with only 10 heads, re-enforces that perception > of sprinklers are too expensive. Your client will remember that it cost > 15 thousand dollars to sprinkler two small guard shacks, not that they > got their 200K sf warehouse for $1.85 SF. > > We need to educate the owner and let them decide what materials and cost > are appropriate for their projects when there are viable alternatives or > materials. > Just like in racks vs ESFR. > > > > Thom McMahon > Firetech, Inc. > 2560 Copper Ridge Dr > Steamboat Springs, CO 80488-2136 > Tel: 970-879-7952 > Fax: 970-879-7926 > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Thursday, October 04, 2007 8:44 AM > Subject: RE: Underground Material > > > If the rest of the system is CLDI it would be simpler to just run a 4" > CLDI run-in to the building and be done. Then no special adapters or > fittings and no need to buy a small qty. of some special material. > > Keep it simple. > > > Craig L. Prahl, CET > Fire Protection Group > Mechanical Department > CH2MHILL > Lockwood Greene > 1500 International Drive > PO Box 491, Spartanburg, SC 29304-0491 > Direct - 864.599.4102 > Fax - 864.599.8439 > [EMAIL PROTECTED] > http://www.lg.com > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Thom > McMahon > Sent: Thursday, October 04, 2007 10:31 AM > To: [email protected] > Subject: Re: Underground Material > > Many water authorities are now using HDPE (High Density Polyethylene) > pipe instead of copper underground. Anyone that's tried to un=roll 2"K > copper knows how often it kinks, deforms, and is just plain difficult to > work with. > Contrary to popular belief copper does corrode. HDPE maintains its > integrity long after copper would have been replaced. Pure core is just > one brand we see a lot of, AWWA C-901, and ASTM (Various approvals) > > Thom McMahon > Firetech, Inc. > 2560 Copper Ridge Dr > Steamboat Springs, CO 80488-2136 > Tel: 970-879-7952 > Fax: 970-879-7926 > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Thursday, October 04, 2007 7:23 AM > Subject: Underground Material > > > > We have a situation where we need to put sprinklers in the guardhouses > at > > the entrances to a larger manufacturing facility. The one guardhouse > will > > have 6 heads and the other 4. We would like to supply the buildings > with > > 2" > > underground. With the exception of copper what are my choices for an > > approved 2" underground pipe material? The project is located in MA. > > > > Matthew Drewello, PE > > > > Fluor Corporation > > 100 Fluor Daniel Drive > > Greenville, SC 29607 > > ------------------------------------------------------------ > > The information transmitted is intended only for the person > > or entity to which it is addressed and may contain > > proprietary, business-confidential and/or privileged material. > > If you are not the intended recipient of this message you are > > hereby notified that any use, review, retransmission, dissemination, > > distribution, reproduction or any action taken in reliance upon > > this message is prohibited. If you received this in error, please > > contact the sender and delete the material from any computer. > > > > Any views expressed in this message are those of the individual > > sender and may not necessarily reflect the views of the company. > > ------------------------------------------------------------ > > _______________________________________________ > > Sprinklerforum mailing list > > [email protected] > > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > > > To Unsubscribe, send an email > to:[EMAIL PROTECTED] > > (Put the word unsubscribe in the subject field) > > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email > to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email > to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email > to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
