HUH? They are designing a manufacturing facility with two guard shacks. This ain't no Motel 6 project or Burger King. If the entire system is CLDI then why go off and by a few sticks of some other oddball material for two run-ins? Equipment is already on site more than likely digging trenches for miles of other underground utilities so no additional cost. Doubt it will be a wet tap either as this is probably part of the overall construction program. So adding a few extra sticks on the DI order will most likely help the overall discount then having to buy a small qty of some oddball stuff from another supplier.
And fyi, spoke like a contractor, not just and engineer. Craig L. Prahl, CET Fire Protection Group Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [EMAIL PROTECTED] http://www.lg.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Thom McMahon Sent: Thursday, October 04, 2007 12:05 PM To: [email protected] Subject: Re: Underground Material Spoken like an engineer, that has no cost relationship, between what they spec. and what it will cost. 2" wet tap vs 4" wet tap, lets see there's 2 grand. 4" DIP vs 2" HDPE there's another 3 grand for say 200 LF, Track hoe vs back hoe, 12" vs 3' wide ditch ----- It just keeps adding up and since it's not your 10 grand, we only spec it because it's what we always use. Making fire sprinklers affordable, as well as reliable is everyone's job! As long as we treat cost as "Someone else's problem" they will continue to resist putting in systems, because "they are too expensive" Adding 10 grand to a job with only 10 heads, re-enforces that perception of sprinklers are too expensive. Your client will remember that it cost 15 thousand dollars to sprinkler two small guard shacks, not that they got their 200K sf warehouse for $1.85 SF. We need to educate the owner and let them decide what materials and cost are appropriate for their projects when there are viable alternatives or materials. Just like in racks vs ESFR. Thom McMahon Firetech, Inc. 2560 Copper Ridge Dr Steamboat Springs, CO 80488-2136 Tel: 970-879-7952 Fax: 970-879-7926 ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, October 04, 2007 8:44 AM Subject: RE: Underground Material If the rest of the system is CLDI it would be simpler to just run a 4" CLDI run-in to the building and be done. Then no special adapters or fittings and no need to buy a small qty. of some special material. Keep it simple. Craig L. Prahl, CET Fire Protection Group Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [EMAIL PROTECTED] http://www.lg.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Thom McMahon Sent: Thursday, October 04, 2007 10:31 AM To: [email protected] Subject: Re: Underground Material Many water authorities are now using HDPE (High Density Polyethylene) pipe instead of copper underground. Anyone that's tried to un=roll 2"K copper knows how often it kinks, deforms, and is just plain difficult to work with. Contrary to popular belief copper does corrode. HDPE maintains its integrity long after copper would have been replaced. Pure core is just one brand we see a lot of, AWWA C-901, and ASTM (Various approvals) Thom McMahon Firetech, Inc. 2560 Copper Ridge Dr Steamboat Springs, CO 80488-2136 Tel: 970-879-7952 Fax: 970-879-7926 ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, October 04, 2007 7:23 AM Subject: Underground Material > We have a situation where we need to put sprinklers in the guardhouses at > the entrances to a larger manufacturing facility. The one guardhouse will > have 6 heads and the other 4. We would like to supply the buildings with > 2" > underground. With the exception of copper what are my choices for an > approved 2" underground pipe material? The project is located in MA. > > Matthew Drewello, PE > > Fluor Corporation > 100 Fluor Daniel Drive > Greenville, SC 29607 > ------------------------------------------------------------ > The information transmitted is intended only for the person > or entity to which it is addressed and may contain > proprietary, business-confidential and/or privileged material. > If you are not the intended recipient of this message you are > hereby notified that any use, review, retransmission, dissemination, > distribution, reproduction or any action taken in reliance upon > this message is prohibited. If you received this in error, please > contact the sender and delete the material from any computer. > > Any views expressed in this message are those of the individual > sender and may not necessarily reflect the views of the company. > ------------------------------------------------------------ > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) > _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
