Gee! It sure must be different in SC than here, where they charge us extra
to install additional underground.
Thom McMahon
Firetech, Inc.
2560 Copper Ridge Dr
Steamboat Springs, CO 80488-2136
Tel: 970-879-7952
Fax: 970-879-7926
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, October 04, 2007 10:14 AM
Subject: RE: Underground Material
HUH?
They are designing a manufacturing facility with two guard shacks. This
ain't no Motel 6 project or Burger King. If the entire system is CLDI
then why go off and by a few sticks of some other oddball material for
two run-ins? Equipment is already on site more than likely digging
trenches for miles of other underground utilities so no additional cost.
Doubt it will be a wet tap either as this is probably part of the
overall construction program. So adding a few extra sticks on the DI
order will most likely help the overall discount then having to buy a
small qty of some oddball stuff from another supplier.
And fyi, spoke like a contractor, not just and engineer.
Craig L. Prahl, CET
Fire Protection Group
Mechanical Department
CH2MHILL
Lockwood Greene
1500 International Drive
PO Box 491, Spartanburg, SC 29304-0491
Direct - 864.599.4102
Fax - 864.599.8439
[EMAIL PROTECTED]
http://www.lg.com
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Thom
McMahon
Sent: Thursday, October 04, 2007 12:05 PM
To: [email protected]
Subject: Re: Underground Material
Spoken like an engineer, that has no cost relationship, between what
they spec. and what it will cost. 2" wet tap vs 4" wet tap, lets see
there's 2 grand. 4" DIP vs 2" HDPE there's another 3 grand for say 200
LF, Track hoe vs back hoe, 12" vs 3' wide ditch ----- It just keeps
adding up and since it's not your 10 grand, we only spec it because it's
what we always use.
Making fire sprinklers affordable, as well as reliable is everyone's
job! As long as we treat cost as "Someone else's problem" they will
continue to resist putting in systems, because "they are too expensive"
Adding 10 grand to a job with only 10 heads, re-enforces that perception
of sprinklers are too expensive. Your client will remember that it cost
15 thousand dollars to sprinkler two small guard shacks, not that they
got their 200K sf warehouse for $1.85 SF.
We need to educate the owner and let them decide what materials and cost
are appropriate for their projects when there are viable alternatives or
materials.
Just like in racks vs ESFR.
Thom McMahon
Firetech, Inc.
2560 Copper Ridge Dr
Steamboat Springs, CO 80488-2136
Tel: 970-879-7952
Fax: 970-879-7926
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, October 04, 2007 8:44 AM
Subject: RE: Underground Material
If the rest of the system is CLDI it would be simpler to just run a 4"
CLDI run-in to the building and be done. Then no special adapters or
fittings and no need to buy a small qty. of some special material.
Keep it simple.
Craig L. Prahl, CET
Fire Protection Group
Mechanical Department
CH2MHILL
Lockwood Greene
1500 International Drive
PO Box 491, Spartanburg, SC 29304-0491
Direct - 864.599.4102
Fax - 864.599.8439
[EMAIL PROTECTED]
http://www.lg.com
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Thom
McMahon
Sent: Thursday, October 04, 2007 10:31 AM
To: [email protected]
Subject: Re: Underground Material
Many water authorities are now using HDPE (High Density Polyethylene)
pipe instead of copper underground. Anyone that's tried to un=roll 2"K
copper knows how often it kinks, deforms, and is just plain difficult to
work with.
Contrary to popular belief copper does corrode. HDPE maintains its
integrity long after copper would have been replaced. Pure core is just
one brand we see a lot of, AWWA C-901, and ASTM (Various approvals)
Thom McMahon
Firetech, Inc.
2560 Copper Ridge Dr
Steamboat Springs, CO 80488-2136
Tel: 970-879-7952
Fax: 970-879-7926
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, October 04, 2007 7:23 AM
Subject: Underground Material
We have a situation where we need to put sprinklers in the guardhouses
at
the entrances to a larger manufacturing facility. The one guardhouse
will
have 6 heads and the other 4. We would like to supply the buildings
with
2"
underground. With the exception of copper what are my choices for an
approved 2" underground pipe material? The project is located in MA.
Matthew Drewello, PE
Fluor Corporation
100 Fluor Daniel Drive
Greenville, SC 29607
------------------------------------------------------------
The information transmitted is intended only for the person
or entity to which it is addressed and may contain
proprietary, business-confidential and/or privileged material.
If you are not the intended recipient of this message you are
hereby notified that any use, review, retransmission, dissemination,
distribution, reproduction or any action taken in reliance upon
this message is prohibited. If you received this in error, please
contact the sender and delete the material from any computer.
Any views expressed in this message are those of the individual
sender and may not necessarily reflect the views of the company.
------------------------------------------------------------
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email
to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email
to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email
to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email
to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)