PEX is rated at 160 psi working pressure @ 73 F & 130psi @ 120 F. There is a 5 to1 safety factor at UL. . . in simplified terms pipe rated @ 175 psi must hold 875 psi for given amount of time. PEX pipe rated at 160 psi is tested at 800 psi. The product is suitable for the service. -- Mike Cabral
---- George Church <[EMAIL PROTECTED]> wrote: > Wouldn't the pressure limitations of PEX be close to exceeded with a 120 PSI > pump? > Obviously we don't know if that's BOOSTING A 50 psi static or anything, but > CPVC and PEX are both limited by temp/pressure ratings less than > conventional UG materials. Certainly, there are applications where both of > these should work- although I've never used pex for anything, can't offer > any pros or cons.. > > Last week Mark and Ron from Aero discussed the high temps of UG water in the > desert installations they encounter (at the SprinklerForum Reception), along > with the residential seminar James gave mentioning pressure/temp limitations > of the two plastic materials mentioned. > > Those who missed the AFSA Convention missed some great seminars, in addition > to the chance to see old and make new friends. > > Oh, and there were a few booths in the Exhibit Hall :) where you can talk to > the factory reps (usually) about problems, such as the fastest acting PRV I > needed for PLD inrush relief; spring-loaded is faster than pilot-operated. > > glc > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Mike Cabral > Sent: Thursday, October 04, 2007 9:41 AM > To: [email protected] > Subject: Re: Underground Material > > I don't want to appear self serving however, PEX is approved for underground > through 2" Here is a link to Rehau. > > http://www.rehau-na.com/index.shtml > -- > Mike Cabral > the word unsubscribe in the subject field) > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
