I apologize!! Meant to send this back to Mark! Have a great weekend everyone ...
Oy vey. SML -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Steve Leyton Sent: Friday, January 24, 2014 3:03 PM To: [email protected] Subject: RE: Fredrick MD, Seismic Zone? The mark of a tight spec' is whether or not they remember to call out that the interior diameter of all piping shall be less than the OD. Bill Forrit Daley Director, Quality Assurance Speckum & Recktom Associates -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark A. Sornsin, P.E. Sent: Friday, January 24, 2014 2:52 PM To: [email protected] Subject: RE: Fredrick MD, Seismic Zone? "Make someone do the job they were paid to do." -Craig L. Prahl, CET But-but...Craig! The specs said "do it per code". They DID their job.... right? And they also said "make sure the water supply is adequate"; and "get the approval of the authorities"; and only use certain types of copper pipe, etc.; and no extended coverage sprinklers, 'cuz that's "untested technology"... What more needs to be done? Mark A. Sornsin, P.E. | Karges-Faulconbridge, Inc. | Fire Protection Engineer | Fargo, ND | direct: 701.552.9905 | mobile: 701.371.5759 | http://www.kfiengineers.com _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler .org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler .org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
