I thought the 5424 did not support Jumbo Frames (could be wrong - so kinda asking)
_____________________________________________________________________________________ Glenn Kelley | Principle | HostMedic |www.HostMedic.com Email: gl...@hostmedic.com Pplease don't print this e-mail unless you really need to. On Feb 15, 2010, at 12:07 PM, Jeremy Parr wrote: > On 15 February 2010 05:22, Tom DeReggi <wirelessn...@rapiddsl.net> wrote: >> There was recently a thread on recommended VLAN switches. Such as which did >> both TX&RX simultaneous port mirroring, Full VLAN support, Ability to LABEL >> ports, etc. >> >> I found out that DELL powerconnec thas the solution that does it all for >> GIGABIT (24Gig + 4SFP). >> >> The model 5424 is the current version, that also support IPv6, QinQ, >> MSTP,SNMP3. (On sale for $600 >> The old model 5324 also does it all, but with only IPv4, RSTP, and SNMP2. >> >> The 802.11Q VLAN implementation is complete and full.. > > These do work well. I don't have any major complaints about the > handfull I have deployed. We use em for cheap iSCSI deployments. > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
