timequest;427138 Wrote: > This is what I want to believe, that the jitter issue is resolved by > using a good DAC with low jitter measurements. If this was simply the > case however, then why would the minimum length of the digital cable > necessarily be a factor; if the DAC would correct any jitter issues, > why even worry about whats upstream from the DAC? Discussions > regarding the importance of minimizing jitter in the digital cable > (i.e.: lengths of 1.5 meters or more), or by re-clocking the signal > before the DAC, leads me to believe there is more to the issue of > reducing jitter than simply incorporating a low-jitter DAC. I would > like to have a better understanding
These are two different issues...the 1.5m cable is NOT to do with jitter, it's to do with reflections on the transdmission line... -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... SB3 (wired) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Outdoors: Boom ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=63796
_______________________________________________ audiophiles mailing list audiophiles@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/audiophiles