Gary Bartlett VE1RGB wrote:
I have been noting with great interest the comments about which way
to rotate the WIDTH control to narrow the filters. Logic may tell you
that clockwise should be wider, but some other instinctive force greater
than that always wants me to turn it clockwise to go narrow. Everyone
up here who uses my K3 says the same thing.
At first I thought this was maybe just a Canuck thing and I was too
embarrassed to speak about it. Then I wondered if it was my advancing
age, and I didn't want to talk about that either. Today, however, I am
comforted to know that I/we are not alone.
Now if Wayne would only reprogram the rig so that VOX would default
to OFF on shut-down, I wouldn't have to concern myself about trying to
remember to turn VOX off myself so that the rig does not actually
transmit during the booting of the attached computer and again when the
logging program starts on next turn-on of the rig.
73,
Gary, VE1RGB, K3 #095
[snip]
I second the thought re the default VOX state upon turn on. I've fallen
into this same trap (and then crawled under my desk upon realizing what
might have gone over the air).
If it wouldn't take too much re-coding, I think such a change would be
worthwhile.
--
73,
Dick ka1oz
Middleborough, MA
K3/100(Kit) SN 859
Titan-DX
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
