I tried your value, and it seem you are really close to the max frequency drive for the stepper.
Can you try to change scale on all 3 axis (divide bay 10) and check that the total time is still the same or not ? this will help to understand if this a trajectory interpolation limitation or a max stepper pulse rate limitation. SCALE = 400.0 --> SCALE = 40.0 (this shall not be a mechanical problem to try, as move will be 10x smaller) Claude Le 08.04.2013 23:57, Steve Blackmore a écrit : > On Sun, 7 Apr 2013 10:21:11 -0500, you wrote: > >> On Sun, Apr 07, 2013 at 10:13:11AM +0100, Steve Blackmore wrote: >>> CV in LinuxCNC still does not work well. Have a look at this >>> >>> http://youtu.be/ph_IVXg1C9Y >> Please share your gcode and your full config directory. > Chris > > Hal file > http://pastebin.com/GP8BNTVR > > ini file > http://pastebin.com/keXTHWyn > > Thanks > > Steve Blackmore > -- > > ------------------------------------------------------------------------------ > Minimize network downtime and maximize team effectiveness. > Reduce network management and security costs.Learn how to hire > the most talented Cisco Certified professionals. Visit the > Employer Resources Portal > http://www.cisco.com/web/learning/employer_resources/index.html > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
