I'm assuming I can just screw the port powered isolator to the PC port and run a shielded cable from the VFD to the isolator?
On 12/26/2015 1:40 PM, Bertho Stultiens wrote: > On 12/26/2015 08:19 PM, Bertho Stultiens wrote: >>> Not sure how I might isolate the VFD from the chassis at this moment. >>> Well I could machine some delrin standoffs... I have a machine shop. >> No problem. If you ensure that the chassis connection is firm and >> electrically sound, then you just ommit the earth wire (my comment in >> the drawing). > One more comment. If you are unsure that the internal earth/chassis > connection in the VFD controller holds, then you usually see a > connection as seen in the attached image. A short thick wire is run from > the earth screw connection to one of the chassis mounting bolts. > > > > > ------------------------------------------------------------------------------ > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
