On 05/28/2017 10:32 PM, Gene Heskett wrote: > pi@pionsheldon:~ $ linuxcnc -l > LINUXCNC - 2.8.0-pre1-2771-gdc2ff49 > Machine configuration directory > is '/home/pi/linuxcnc/configs/sheldon-lathe' > Machine configuration file is '7i90-axis.ini' > Starting LinuxCNC... > Found file(REL): ./hm2-7i90-stepper.hal > Note: Using POSIX realtime > hm2: loading Mesa HostMot2 driver version 0.15 > HAL_hm2_rpspi: ERROR: Unsupported Platform, only Raspberry1/2/3 > supported... > rtapi_app: caught signal 11 - dumping core > ./hm2-7i90-stepper.hal:32: waitpid failed /usr/bin/rtapi_app hm2_rpspi [snip] > That faint scratching sound? Me, scratching head. :) > > However, if it makes any diff, this is linuxcnc-uspace I am trying to > run. And with the buildbot down, I've no access to the rt version. :(
I guess there are some hard dependencies failing. I'll build a clean SD card with all on it once I get it all debugged, and hopefully fixed. -- Greetings Bertho (disclaimers are disclaimed) ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users