On Monday 29 May 2017 01:04:09 Bertho Stultiens wrote: > On 05/28/2017 10:32 PM, Gene Heskett wrote: > > pi@pionsheldon:~ $ linuxcnc -l > > LINUXCNC - 2.8.0-pre1-2771-gdc2ff49 > > Machine configuration directory > > is '/home/pi/linuxcnc/configs/sheldon-lathe' > > Machine configuration file is '7i90-axis.ini' > > Starting LinuxCNC... > > Found file(REL): ./hm2-7i90-stepper.hal > > Note: Using POSIX realtime > > hm2: loading Mesa HostMot2 driver version 0.15 > > HAL_hm2_rpspi: ERROR: Unsupported Platform, only Raspberry1/2/3 > > supported... > > rtapi_app: caught signal 11 - dumping core > > ./hm2-7i90-stepper.hal:32: waitpid failed /usr/bin/rtapi_app > > hm2_rpspi > > [snip] > > > That faint scratching sound? Me, scratching head. :) > > > > However, if it makes any diff, this is linuxcnc-uspace I am trying > > to run. And with the buildbot down, I've no access to the rt > > version. :( > > I guess there are some hard dependencies failing. > > I'll build a clean SD card with all on it once I get it all debugged, > and hopefully fixed.
It is crashed ATM, I have plugged in the HD, and trying to make a backup image, I have now made 2 passes at copying /usr to it, getting to something around 500 megs of the 3.6Gigs of /usr twice before it, or mc has upchucked. mc shows a broken pipe, the 2 logins via ssh are dead, broken pipe, no route to host, yadda yadda. Going out to it, red pwr led only, monitor powered down from lack of drive, and pulling the power for a couple seconds and it boots right back up. I can then fsck the HD, and its clean, so I remounted it "mount -t ext4 /dev/sda3 /media/slash". I'll do that then see how far I can get using rsync. But its 6:30 am here, and I don't have one eye open simultainiously yet, needs massive coffee input. Probably more zz's too. If you've a deb of the rt linux, I could try that since all I have is the uspace version. >From the other pi: pi@raspi:~ $ ls -l /var/cache/apt/archives|grep linuxcnc -rw-r--r-- 1 root root 12782074 Dec 18 04:02 linuxcnc-doc-en_1%3a2.8.0~pre1.2771.gdc2ff49_all.deb -rw-r--r-- 1 root root 3705802 Dec 18 04:03 linuxcnc-uspace_1%3a2.8.0~pre1.2771.gdc2ff49_armhf.deb -rw-r--r-- 1 root root 670600 Dec 18 04:02 linuxcnc-uspace-dev_1%3a2.8.0~pre1.2771.gdc2ff49_armhf.deb I'm not 100% sure that is whats installed on the newer setup, but will arrange to do that before the day is waning. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
