On Thursday 20 August 2020 10:03:56 Gene Heskett wrote: > > I'm still trying to control adhesion, I am damaging the glass > chiseling my prints loose. I do have 2 of these drive things running > now, and I was going to try a 40C bed at 190C for the last flexgear, > but that still blocked the flow, and it wasn't till I warmed up the > extruder to 210 that the flow motor stopped complaining. > > Thanks for any hints on how to reliably control the adhesion with > white PLA. Its sticking way too good.
And the 2nd one died in about an hour, broken flexgear, and it was still 2 red ones too big for the main bearing, so another .2 reduction in scale is building now, broken this time at the junction of wall top and spline, possibly by an oversized bearing carrier, pressing the splines tightly for no backlash, concentrating the flexure at the bottom of the splines. Perhaps I'll have to tolerate a red hair of backlash? Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
