Damn :) Well dunno, asterisk version btw... ?
On Monday 28 January 2008 18:36:21 Shachar Shemesh wrote: > Noam Rathaus wrote: > > Hi, > > > > I once had a similar issue, the TDM card was badly shipped, the modules > > weren't the right one I thought they were.. i.e. FXS instead of FXO or > > the other way around, resulting in a card having FXS with another 3 FXO > > (or the other way) which caused Asterisk to confuse, and nothing to work > > properly. > > > > I discovered this by placing NOTHING as a group, as anything can be done > > without the need to group them, and the problem "appeared" to have been > > resolved - which led me to the conclusion I was grouping things > > incorrectly - openned the box and noticed the mistake by the card > > supplier. > > > > Not sure if this is the same case as in your configuration. > > Been there, done that, complained to the supplier and got the new > modules already :-) > > This is what dmesg has to say about my system: > > ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 201 > > Freshmaker version: 73 > > Freshmaker passed register test > > Module 0: Installed -- AUTO FXS/DPO > > Module 1: Installed -- AUTO FXS/DPO > > Module 2: Installed -- AUTO FXS/DPO > > Module 3: Installed -- AUTO FXS/DPO > > Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules) > > ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 209 > > Freshmaker version: 73 > > Freshmaker passed register test > > Module 0: Not installed > > Module 1: Not installed > > Module 2: Installed -- AUTO FXO (FCC mode) > > Module 3: Installed -- AUTO FXO (FCC mode) > > Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules) > > Registered tone zone 0 (United States / North America) > > Registered tone zone 19 (Israel) > > So, no, this does not appear to be the problem here. > > Shachar -- Noam Rathaus CTO [EMAIL PROTECTED] http://www.beyondsecurity.com "Know that you are safe." Beyond Security Finalist for the "Red Herring 100 Global" Awards 2007 ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
