On Thu, 2002-07-25 at 09:25, Stephen Liu wrote: > Hi Evgeny, > > Thanks for your advice. > > My critical question is in case OS crashed how to recover the data. > > In Windows world I make a D partition for data and C for OS. In case of > crash I just reinstall the OS. My data are still there. How about in > Linux world ???
It's exactly the same. If you've partitioned with, say /home, /opt, /u, /data or whatever (as a substitute for D:) on a separate partition, the install process will ask if you want to reformat partitions. Just say 'no' to reformatting those where your data is. IMHO, like most things in Linux, it's actually easier than Windows. > > At 03:38 PM 7/24/2002 +0200, Evgeny Limarenko wrote: > >/boot should be of small size like 32Mb. Swap can be big enough, > >something like twice an amount of RAM. The rest is for /. > > Theoretically, the size of swap is double the capacity of RAM. If RAM > exceeds 1G how to set the swap size. > The "twice size of RAM" is a rule of thumb. _If_ your system is sufficiently fast, and has adequate RAM, it may be you use virtually no swap at all. 1GB of swap is one heck of a lot of swapped processes, so I would suspect if your system was using anywhere near this, it's spending most of it's time thrashing, so I'd be more concerned about upping the horsepower than worrying about increasing swap. YMMV. Bryan ------------------------------------------------------- This sf.net email is sponsored by: Jabber - The world's fastest growing real-time communications platform! Don't just IM. Build it in! http://www.jabber.com/osdn/xim _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net