Re: BGP4 and Multiple Providers [7:55918]
I have had a brief demo as part of a WSD training session. The Linkproof handles DNS for the links and does active delay probing on incoming and outgoing traffic. >From the Manual: Radware's LinkProof eliminates all of the complexities of multi-homing design, providing a single, easy to manage appliance that intelligently utilizes all Internet links optimally. LinkProof also maximizes the benefits of multi-homed networks that are never fully taken advantage of with traditional designs. The following diagram represents a typical LinkProof configuration. LinkProof provides the following advantages for multi-homed networks: o LinkProof intelligently manages the IP address ranges assigned to the network from various ISPs. o LinkProof ensures that all ISP links are used by intelligently load-balancing all outgoing traffic through the available links, while simultaneously managing the address spaces used for outgoing traffic. o LinkProof's intelligent load balancing uses link availability, link load, and link strength (in cases where various links have differing bandwidths) as factors that contribute to load balancing decisions. o LinkProof uses Radware's already proven proximity detection algorithms to choose the best ISP for outbound traffic, taking into account router hops and latency to the destination network, as well as current load per ISP link. o LinkProof houses an intelligent DNS server agent that can manage the flow of incoming traffic into the network, assuring that all ISP links are used for all incoming traffic and no address from a failed ISP link is ever advertised to the Internet. o LinkProof's proximity can also be used to ensure that the optimal path is used for inbound traffic. In essence, the LinkProof is a single, easy to administer, traffic manager for the multi-homed network, eliminating the complexities of routing protocols and uncertain traffic patterns. It also optimizes the multiple ISP connections of the multi-homed network to ensure that all links are used to the best of their potential, thereby making the entire network more efficient for inbound and outbound traffic. Vern Stitt CCNA, ASE, MCSE (4.0 & 2000) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56280&t=55918 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BGP4 and Multiple Providers [7:55918]
As an alternative, Radware offers the LinkProof which also allows multiple ISPs without using BGP. Their box is a more robust ASIC based design rather than a PC. The same hardware is also used in their FireProof and Web Server Director (WSD) products. Vern Stitt CCNA, ASE, MCSE(4.0 & 2000) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56205&t=55918 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Prototype and Pilot
I concur with Jonathan. I have worked in the past for minicomputer and mainframe engineering departments. The prototypes were built from sketches and uncontrolled documentation. You could change anything you wanted at any time. Once the engineers got the desired funtionality working, they documented the unit and put all of the hardware documentation and software under Engineering Change Order (ECO) control. The Pilots were then built using the controlled documentation to purchase custom parts and assemble units in small volume, usually in Manufacturing Engineering. After the pilots were produced and accepted, transfer to volume manufacturing could take place. Vern Stitt AE, ASE, CCA, CCNA, MCSE ""Jonathan Hays"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... These terms derive from industries predating the Computer Revolution. The full terms are more self-explanatory: Prototype Development and Pilot Production. In the Pilot Production phase the majority of bugs have been removed and a small Production run results in enough units to attempt a last real-world verification of the unit before finalizing the Production line hardware, software, processes, etc. Not a big deal in the software world but at a big automotive electronics plant (for example) that might produce hundreds or thousands of automotive control computers PER DAY the Pilot Production phase is critical. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: W2K and 98, off subject sorry but I need help
Physically reconfigure the disk drives so that the Windows 98 disk is disk(0) and the Windows 2K disk is disk(1). Make sure that Windows 98 boots fine without the boot loader screen. Then boot the Win2K CD and upgrade the existing Win2K Advanced Server partition to the same version of Win2K Advanced Server. It won't change anything on the Win2K partition, but it will build a new usable boot.ini on the Windows 98 partition. You should end up with: [boot loader] timeout=30 default=multi(0)disk(1)rdisk(0)partition(1)\WINNT [operating systems] multi(0)disk(1)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Advanced Server" multi(0)disk(0)rdisk(0)partition(1)\C:\="Microsoft Windows 98" I have never seen Windows 98 boot from anything other than the first active partition on the first disk drive which the BIOS designates as C:. There are some multiboot utilities out there but they usually want to be involved before the Operating System is installed. Vern Stitt ASE, CCA, CCNA, MCSE ""Brandon Peyton"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi, Im trying to figure out how to configure my boot.ini file so it will boot into win98. I have 2 40 gig drives in my server, on 1 HD is W2K Advanced Server on the second HD was in98. Currently I have: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINNT [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Advanced Server" multi(0)disk(1)rdisk(0)partition(1)\C:\="Microsoft Windows 98" I've also tried "\Windows" and "C:\WINDOWS" both fail and have fatal error. Would someone who has dual boot NT and 98 please show me a copy of your boot.ini file? it would be in your c: dir. I've looked in tons of how to's but none offer 2 disk assistance only partition. Thanks for your help Brandon _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Router(boot)>
Try the procedure from Cisco at : http://www.cisco.com/warp/public/474/pswdrec_2500.html The break key combinations are at: http://www.cisco.com/warp/public/701/61.html Hope This Helps, Vern Stitt ASE, CCA, CCNA, MCSE ""Mike"" <[EMAIL PROTECTED]> wrote in message 8tacj2$gg7$[EMAIL PROTECTED]">news:8tacj2$gg7$[EMAIL PROTECTED]... Hi, I bought a 2524 off Ebay that comes up with Router(boot)> What is the break sequence to get into the box as I do not have the enable password? I am running Hyperterminal on Win2k. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PLCC Tool, 4000M+ Flash questions
I found a PLCC Extractor about halfway down the page at: http://action-electronics.com/augat.htm The list price is $9.99. I didn't check out their shipping and handling policy. Other tools can be used to pry out the PLCC, but if the case is cracked the PLCC socket is extremely difficult to replace. It won't work if cracked, because it won't keep a firm pressure on the contacts resulting in flaky connections. Vern Stitt ASE, CCA, CCNA, MCSE _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PIX w/ 3 Interfaces
The cisco documentation has a few examples! Try this one. http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_v52/config/exa mples.htm#xtocid274895 Vern Stitt ASE, CCA, CCNA, MCSE _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ccna question
For simulation test use the following links. www.measureup.com - 10 demo questions www.techmindworks.com - 15/30 demo questions www.boson.com - 36 demo questions www.cert21.com - quite some questions www.sureshhomepage.com/tests/CCNA.htm - quite some questions www.angelfire.com/az2/examslam/index.html - good collections of qs. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: COLT tests
Here's the link, it requires CCO login. http://www.cisco.com/cgi-bin/front.x/wwtraining/colt/ColtLogin.pl Vern Stitt ASE, CCA, CCNA, MCSE _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Switch reboots when a laptop is connected
In NT 4.0, you could add a /NoSerialMice switch to the boot.ini line which disables searching for a serial mouse on the comm ports. Vern Stitt ASE, CCA, CCNA, MCSE **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: booksamillion
I always use the following search engines to find the lowest prices: http://www.addall.com/ http://www.bestbookbuys.com/ http://isbn.nu/ One of these will usually find a great price! Vern Stitt ASE, CCA, CCNA, MCSE **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Password for 2501
Here's the link for the index of all password recoveries: http://www.cisco.com/warp/public/474/index.shtml "Danny Mok" <[EMAIL PROTECTED]> wrote in message Hi all, We have a Cisco router 2501 sitting between the Internet and our firewall. A network infrastructure change involves a configuration change at the router. Unfortunately nobody seems to recall the password. Does anyone know how to hack into Cisco router 2501? Thanks in advance. Danny **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Online (CCO) assessment exam link
http://www.cisco.com/cgi-bin/front.x/wwtraining/colt/ColtLogin.pl ""Montgomery, Robert WARCOM Contractor"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... About a month ago, someone posted a link to some self assessment exams on the CCO site. Does anyone still have that link and would they be willing to re-post it? Thanks. Rob Montgomery CCNA MCP Information Security Engineer IA Systems Analyst Sytex, Inc./ Naval Special Warfare Command **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: What routers for ccna 2.0 and ccnp 2.0?
If you use the 640-407 book from Sybex, make sure to download the "errata" and "new chapter 11" from their web site. http://www.sybex.com/cgi-bin/rd_err_temp.pl?2381err.html http://www.sybex.com/cgi-bin/rd_up_temp.pl?2381up.html The errata makes the book much better as it corrects many of the errors in the book. The new chapter 11 adds more WAN information. Vern Stitt ASE, CCA, CCNA, MCSE ""Don Crow"" <[EMAIL PROTECTED]> wrote in message 009901c01ca7$648492e0$6401a8c0@doncrow">news:009901c01ca7$648492e0$6401a8c0@doncrow... I am going to obtain two routers for my preparation for the CCNA 2.0, and CCNP 2.0. track. I would appreciate any suggestions on what type of routers to get. I have seen people recommend two 2501 routers while other say get one with a token ring interface. I was given the book CCNA Study Guide exam 640-407 by Todd Lammle. What book would be a good addition to this that would cover the additional information for the 640-507 test. Any suggestions on either of these matters would be appreciated. Thanks Don **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Modem question
Hey Mari, You will never see a 56000 bps connection! I think the fastest allowed by telco due to line parameters is 53300. I usually get 48000 or 51000. But after a sustained heavy rain, I only get 16000 or 28000 and once only got 9600. Must have a crack in the insulation on my line between my home and the CO. If you consistently get a low connection speed, you probably also get noisy voice connections! Vern Stitt ASE, CCA, CCNA, MCSE ""Mari Misato"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi Group When you use a 56K modem to connect to internet, you never achieve 56K. For example, sometimes it shows that the bytes sent at 48000 bps, sometimes 45000 bps, everytime it's different. So, where has those "bandwidth" gone to?? (<--please correct if I'm wrong on this) So, can I conclude that a 56K modem is only theoretically 56K??? Thanks and regards. _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Drive, Motivation and Determination !!!!!!!!
It's too bad that you don't live in the northeast, Our local Cisco office has lots of hands on events for resellers that don't cost anything. The handouts and presentations are stored on the web site in ZIP format in the "Presentation/Document Archive" at http://www.cisco-resellers.com/ The schedules for the Reseller Hands On events are also there. I went to a lot of them from a reseller that only sold one router and one PIX in a six month period while I worked there. Vern Stitt ASE, CCA, CCNA, MCSE ""Daniel Boutet"" <[EMAIL PROTECTED]> wrote in message 8par87$t5k$[EMAIL PROTECTED]">news:8par87$t5k$[EMAIL PROTECTED]... I totally agree with you Terrence. I do not have the opportunity to work with Cisco Products except AccessPro cards (2). I also just started my own consulting firm, so it is not easy to be able to buy the right equipment to paractice on. (NO $ available right now) I have other certs CNE (3,4,5), MCSE, A+ where I get to practice my skills everyday. I also have CCA but do not get to work on Citrix anymore. Not a lot of firms know about this product Citrix doesn't even have a demo version for labs. All they provide is a virtual demo room in FLA. There is also a time factor. I dedicate my time to working and trying to build a customer base. The time that I can spend in my lab is minimal. When you decide to study certification like Cisco it would be nice that Cisco would let us use their lab. After all we are supporting their products. Wouldn't it make sense for them to want certified people that at least saw their products (inside and out) and have minimal hands on? When I first started this certification I phone my local Cisco office and asked them if they had a lab I could use. I was turned away as if I was crazy. How is a person suppose to get real hands on in Edmonton Alberta? After I get more knowledge (books) I will try to give my time freely to get some experience. Just my two cents. ""Terrence Garrison"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > lets face it. Any Certification that has no lab > can be obtained by an average person with ENOUGH > study. The CCIE can be passed if one has access to > the right equipment. There is NEVER a need to take > a class or have real experience. . .unless of course > you actually want to be good at your job. Having said > that, merely obtaining a cert like the CCNP or MCSE or > CCNA is of some value depending on the depth of the > job one needs to perform and the ability of an individual > to translate theory into practice. Some people can do > this better than others, but it depends on the individual > and have much drive, motivation and determination one > has. In the end, it is drive, motivation and determination > that makes anyone good at whatever it is they do. . .Cert > or not, degree or not, smart or average. > > > >From: "Rishard Chapoteau" <[EMAIL PROTECTED]> > >Reply-To: "Rishard Chapoteau" <[EMAIL PROTECTED]> > >To: [EMAIL PROTECTED] > >Subject: Re: Anyone achieve their CCIE through self study not from work! > >Date: Wed, 6 Sep 2000 16:02:35 -0400 > > > >So your telling us you got your CCNP with no experience at all? I > >seriously > >hope not. > > > >Rishard > > > > > >""Wind"" <[EMAIL PROTECTED]> wrote in message > >8p444d$q14$[EMAIL PROTECTED]">news:8p444d$q14$[EMAIL PROTECTED]... > > > Hiya; > > > > > > Now I finished my CCNP. I should go for the CCIE, > >otherwise > >my > > > ccnp status is just a paperwork. > > > I just wondering does CCIE can be earned through self study, not from > > > working with system integrator? > > > > > > Thanks > > > Vincent > > > > > > > > > ___ > > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > > > > >___ > >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > >FAQ, list archives, and subscription info: http://www.groupstudy.com > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > Share information about yourself, create your own public profile at > http:
Re: Win2k SNMP Traffic
Windows 2K does not enable SNMP by default. Dell is doing that so that their server monitoring software will get messages from the servers warning you when a fan slows down, a power supply starts to regulate out of spec or a RAID controller reports a container member problem. Stopping and disabling SNMP in services will stop the snmp traffic but will cause all the Dell monitoring applications to report problems initializing. Also, this has nothing to do with network neighborhood browsing. Putting those systems in a different domain or workgroup will make them less obvious. A different domain without a trust relationship will give some security against access. Vern Stitt ASE, CCA, CCNA, MCSE "Deepak Sharma" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Ok here's the scenario. Multiple branch offices,( LAN, WAN> slowest 56k and fastest oc3) and cisco routers from 1900's to 3600's ) PDC, and a whole lota BDC's. NT 4.0 PDC and BDCs; still wanna see the those computers when I go into network neighbor hood. BT.Dell is now shipping all there new Pc's with win2k professional, and refuse to go back to win9x for me. (( ba*tards))this causes me to have alota headache, cause win2k has SNMP traffic enabled by Default when we get them...and now I can start to see all the new win2k machines in network neighbor hood. This is a problem due to security reasons and management and blah blah blah...and there's NO possible way I can go, or tell the techy there to go to disable SNMP traffic on all the new comps!!!I was thinking about goin to all the branch offices and config. the routers to block snmp traffic ( port 161 off the top of my head ), So is there any way i can block SNMP traffic on win2k professional from the routers..cause i still wanna see the pdc and bdc's.but this is not too important...I just REALLY need to stop those win2k machines from appearing on network neighborhood " access-list 100 deny snmp win2kpro" hahah thanks Deepak Sharma MSCE CCNA ACT A+ Ceridian Canada Ltd. -- \\|// (o o) oOOo-(_)-oOOo *@ bcz finest @* ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associate-Announcement.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: I want download cisco IOS,who can help me?
Liu, The cost of the SmartNet contract depends on the model of the router in question. I sure that for a low end router the price is less than $100. I think I paid about $75 for a SmartNet contract for a customer's 803 router. A high end router costs more because the contract also covers replacement of defective hardware by Cisco. I think that any SmartNet contract gets you CCO access to the FTP site where the IOS images are stored. Vern Stitt ASE, CCA, CCNA, MCSE ""liu"" <[EMAIL PROTECTED]> wrote in message 8p7mlt$3de$[EMAIL PROTECTED]">news:8p7mlt$3de$[EMAIL PROTECTED]... thanks all so I have to buy smartnet for my router's IOS,but I think it is impossible,it is to expensive for me. thank you again. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: cisco documentation
Hi Computer Services, The answer to this and many other questions is in the archives. It's one of the best tools that we have! The Cisco Documentation CD works on Windows 2000. It's because the Verity search engine does not use or recognize the search path. - %ProgramFiles%, as you'll see in the registry. To get the Cisco documentation to work under Windows 2000: - Completely uninstall and remove all the related files from a failed installation of the documentation CD first! - Run regedit - Locate HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/IE4/Setup/Path - Change the value from "%programfiles%\Internet Explorer" to the location where IE is installed on your system, for example "C:\Program Files\Internet Explorer". - Install the Documentation CD HTH, Vern Stitt ASE, CCA, CCNA, MCSE ""computer services"" <[EMAIL PROTECTED]> wrote in message 000e01c0180e$60495000$b70b80cb@shamikh">news:000e01c0180e$60495000$b70b80cb@shamikh... Hi guys , i m having a problem when ever i install cisco documentation cd . i installed the software and when i launch documentation cd it does not show any thing .(it does not come to loop back address 127.x.x.x what i think it suppose to do so )but when i explore that cd and click to index or home html files it show main page .but when i click to any of the link , it shows code .i made sure that my explorer settings are not to show source code. i m having same problem in netscape too. will u please tell me how can i fix this problem Thanks in advance. Muhammad ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cable ????????
10/100BaseT Nodes - Router, PC, Network Printer, etc. 10/100BaseT Bus Products - Hub, Switch Straight Through Cable - Connecting a Node to a Bus Product. Crossover Cable - Connecting like items such as a node to a node or a bus to a bus. Vern Stitt ASE, CCA, CCNA, MCSE ""Rah Sta"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Can someone tell me when should I use a cross over cable and when should I use a straight-through cable? Always get confuse. Thank you. Raheem ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Break command under hyperterm
I think that this link covers most of the bases. http://www.cisco.com/warp/public/701/61.html HTH, Vern Stitt ASE, CCA, CCNA, MCSE ""Clay Stuckey"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... What is the proper key stroke combination to send a break command under hyperterminal? Or what other terminal emulation program will do it? I have net term and procom plus also. -- Clay Stuckey - MCSE | My Resume: http://24.9.74.46/clayres.doc 1237 Llewellyn Road | [EMAIL PROTECTED] Mt. Pleasant, SC 29464 | ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Online Bookstores
I like to let my computer do the searching and comparing using: http://www.addall.com/ http://www.bestbookbuys.com/ They look all over the place and usually get me the best price! Vern Stitt ASE, CCA, CCNA, MCSE ""Bradley J. Wilson"" <[EMAIL PROTECTED]> wrote in message 001601c014fa$b7a81780$[EMAIL PROTECTED]">news:001601c014fa$b7a81780$[EMAIL PROTECTED]... Actually, if you *really* want to save money on tech books, check out a bunch of online bookstores - one of them usually has it for much less than the others. My usuals are: bookpool.com fatbrain.com borders.com cbd.booksonline.com Capitalism rocks. Sincerely, Bradley J. Wilson CCNA, CCDA, MCSE, CCSE, CNX-A, MCT, CTT ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Activation Key
Try Cisco TAC at 1 800 553 2447. Vern Stitt ASE, CCA, CCNA, MCSE ""Parris, Brian"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Can somebody tell me how to get an activation key for VPN-Des so I can set up my PIX with VPN. I tried [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> but that was 2 days ago and still haven't gotten a reply. Thanks, Brian ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Book sugession - CCNA
If you only use the Lamle 407 book, make sure download the Erratta and new Chapter 11 from the Sybex web site. ftp://ftp.sybex.com/2381/CCNA_c11.pdf http://www.sybex.com/cgi-bin/rd_err_temp.pl?2381err.html Vern Stitt ASE, CCA, CCNA, MCSE ""Saswata Mohapatra"" <[EMAIL PROTECTED]> wrote in message 008401c011cb$d2909d60$b2e03604@computer">news:008401c011cb$d2909d60$b2e03604@computer... Hi All I am preparing for CCNA. Can you suggest a real good book? I have Lamle's 407 book. Is this book suffice? Please advice. Thanks Saswata ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Standard Cisco passwords
I have seen way too many users and systems that still have the default password from the install still in use years later. Aren't all NT Administrator passwords either or "password"? By the way, when troubleshooting a PIX to VPN Client connectivity problem, the first thing TAC wanted changed was the pre-shared key to "cisco1234". More than half of the pre-shared keys that I have seen since then are all "cisco1234". Using these passwords and/or keys makes your system as secure as you are at home when you lock the screen door! Vern Stitt ASE, CCA, CCNA, MCSE ""Ledwidge, Feargal"" <[EMAIL PROTECTED]> wrote in message CD9DBAE1E066D311A8AE00805FA7F57C031DF866@NTMAIL03">news:CD9DBAE1E066D311A8AE00805FA7F57C031DF866@NTMAIL03... "cisco" and "sanfran" are only standard passwords in cisco classrooms. In real life - there are no such thing as standard passwords. Feargal -Original Message- From: Hans Stout [mailto:[EMAIL PROTECTED]] Sent: Tuesday, August 29, 2000 3:31 AM To: [EMAIL PROTECTED] Subject: Standard Cisco passwords Hi colleagues, do you know what the Cisco standard passwords are ? As far as I remember, they are 'cisco' and 'sanfran', but I am not sure (also not sure about lower/upper case). Thanks for your help in advance. Georg Pauwen ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Word wrap - was Re: MCNS (v2.0) questions
I usually copy and paste the two lines into notepad, edit out all the extra linefeeds, etc and then [CNTRL] A, [CNTRL] C and [CONTRL] V into the URL address window. Vern Stitt CCNA . . . . <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... OK, I'll bite and assume this is a genuine question and not a leg-pull, since nobody else seems to have answered it. Many mail programs will automatically turn a URL into a hot-spot so you can open the URL directly from email. However if the URL is long enough to wrap over more than one line, usually only the first line is turned into the hot-spot, so if you click on it it won't work because it's missing part of the URL. "Watch the word wrap" just means that if the URL is longer than one line, you may need to cut and paste it into your browser. Otherwise the mailing list gets clogged up with comments like "but this URL doesn't work for me"... I was going to make some smart comment about word wrap being encapsulation of words in sentences, but I'm a bit too braindead to think it out properly... JMcL -- Forwarded by Jenny Mcleod/NSO/CSDA on 08/08/2000 16:30 --- [EMAIL PROTECTED] on 08/08/2000 05:38:15 Please respond to [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: [EMAIL PROTECTED] (bcc: JENNY MCLEOD/NSO/CSDA) Subject: Re: MCNS (v2.0) questions In a message dated 8/7/00 3:30:02 PM Eastern Daylight Time, [EMAIL PROTECTED] writes: << Haven't taken the exam but there's an outline for the MCNS course on the Cisco site. http://www.cisco.com/pcgi-bin/front.x/wwtraining/course_description.pl?Cours e= TRN-MCNS&Version=2.0&From=Network_Management watch the word wrap Karen E Young Network Engineer ELF Technologies, Inc [EMAIL PROTECTED] >> OK, I've tried not to ask this for a long time but it's really starting to drive me crazy!!! what is this "word wrap". Whenever I go to cisco's site from a post like this I try to look for something unusual, hoping that it will be this "word wrap". But I haven't seen it yet. Could someone please fill me in... Mark Zabludovsky ~ CCNA, CCDA [EMAIL PROTECTED] If the automobile had followed the same development as the computer, a Rolls-Royce would today cost $100, get a million miles per gallon, and explode once a year killing everyone inside. ~Robert Cringely, InfoWorld~ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Prerequisites
IMHO - An MCSE is not a prerequisite to becoming a CCxx. However, some of the Microsoft Courses and tests from the old NT 4.0 series serve as entry-level primers toward CCxx. Specifically, studying and passing the certification test for "Networking Essentials" gives a good overview of physical connections and limitations. "TCPIP" beats you to death on subnetting, default gateways and if you can ping this machine A and that machine C, why can't you ping machine B. I already had a MCSE when I started studying for the CCNA. Some of the material was real familiar. The IOS commands were new but made sense. "OH, that's how they handle that!" was a common thought. More likely, people with little or no college education but with an interest in joining the high paying world of information systems and Internet stuff are guided into MCSE training. They get jobs at NOS helpdesks or upgrading systems at the local retailer at absurdly low wages. Then their real interests and aptitudes divert them into other areas. If they hated TCPIP, they stick with GUIs and Windows admin stuff, maybe some programming. If they liked TCPIP, subnetting and command lines, they will be seduced by routers and IOS. Me, I always liked the command line OSs. It took me a long time to get used to clicking on icons without thinking "I wonder what the heck are the default switches for the command line this icon launches? How can I change the switches without opening a command prompt?" Vern Stitt AE, ASE, CCA, CCNA, MCSE ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Nooo! I failed! what now?
Hey Al, It looks to me like you were studying from an older 407 exam prep book. Cisco added quite a few WAN and Switch questions to the 407 test pool late last year. Check the publisher's web site for errata and updates. I got a large Chapter 11 update from the Sybex site for my 407 Study book that had a great deal of WAN stuff in it that the original book did not cover. The errata sheet also had fixes for the review questions that didn't seem quite right. Since it's now after July 31, 2000, you'll have to take the 507 CCNA 2.0 test. You did good to buy the two study books. I would also invest in a Boson practice test. HTH, Vern Stitt AE, ASE, CCA, CCNA, MCSE <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hello... Despite many hours of self study and memorization I failed the 407...wasn't even close.. I scored 617. 71% OSI 14 WAN 42 IOS 60 Net Protocols 33 Routing 20 Security 57 LAN Switch 0Cisco Career Certs (does this have anything to do with the score?) 0Cisco Career Cers Agreement (does this have anything to do with the score?) Does anyone have any tips for me to pass the test..I am rescheduled in one and a half weeks...thanks a lot Al ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Studying info and help?
Hey Keith, Here in the states we use the term school for any type of training held in a classroom. We have Elementary School, Middle School, High School, MCSE School, Cisco School and my favorite High Performance Driving School. The Driving School labs are held outdoors of course but still refered to as a school. Vern Stitt AE, ASE, CCNA, MCSE ""keith wood"" <[EMAIL PROTECTED]> wrote in message 8lonqb$boq$[EMAIL PROTECTED]">news:8lonqb$boq$[EMAIL PROTECTED]... > OK this may be a cultural thing (I'm from the UK) but 'school' is for people > upto the age of 16. Is it my imagination or are they starting them VERY > young these days... > > Alternatively I suppose I could just be getting old... :-( > > ""Bob Edmonds"" <[EMAIL PROTECTED]> wrote in message > 8ln9sb$mce$[EMAIL PROTECTED]">news:8ln9sb$mce$[EMAIL PROTECTED]... > > Hi all, > > > > I recently passed my CCNA exam with a score of 916 and now I'm planning on > > going for CCNP 2.0. I was wondering if anybody knew of a good study group > > in the Toledo, Ohio area. I will be attending school there in about 3 > weeks > > and would like to join a group of fellow Cisco studiers! If anyone has > any > > info it would be a great help. > > > > Thanks in advance > > > > Bob > > > > > > ___ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > --- > > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Documentation CD and Windows 2000
Hi Thierry, Don't forget to completely uninstall and remove all the related files from a failed installation of the documentation CD first! Vern Stitt ""Couture, Thierry"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > To get the Cisco documentation to work under Windows 2000: > > - Run regedit > > - Locate HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/IE4/Setup/Path > > - Change the value from "%programfiles%\Internet Explorer" to the location > where IE is installed on your system, for example "C:\Program Files\Internet > Explorer". > > - Install the Documentation CD (I only install the web publisher component > and install the rest from newer versions). > > Should be good to go... > > Regards, > > Thierry. > > > > -- - > Thierry Couture -"If you're not living on the edge, > Sr. Magic Keeperyou're taking up to much space" > > eMail: [EMAIL PROTECTED] Bayshore Technologies > Voice: (813) 889-TECH W. Waters Ave., Suite 610 > Fax: (813) 889-0989 Tampa, FL 33716 > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Part 1 - BGP Certzone white paper
Hey Group, Just my $.02. Since I joined this group, I am constantly impressed by the quality of it's members. This includes not only CCNPs and CCIEs, but published authors on various Cisco or networking related subjects. I would personally expect a lot of posts saying "The answer is in my book. buy my book!" But that is not the case at all. These people spend hours explaining things to newbies and intermediates who are trying hard but missing a few fine points. I say, if you get a chance, buy something from them! As only a single example, if you want a copy of Howard's paper, join CertificationZone. We have all read hundreds of dollars worth of his explanations free on this news group. If you get half a chance, buy something with his name on it or something with access to his white papers! I bought Priscilla's book "Top Down Network Design", not only because of the reviews but because of her excellent posts to this group. I won't go on and on even though I could. I'm sure you all get my point by now! Vern Stitt AE, ASE, CCNA, MCSE ""Chuck Larrieu"" <[EMAIL PROTECTED]> wrote in message 000101bff5b2$cfd21a20$[EMAIL PROTECTED]">news:000101bff5b2$cfd21a20$[EMAIL PROTECTED]... > I'm sure there are several people on this list who 1) may have downloaded a > copy of this paper at the time it was offered for free or 2) subscribed to > CertificationZone and have received this paper in the mail. ( subscription > also entitles one to download back issues and previous months' white > papers. ) > > Let me first state that I am not unsympathetic to the cost of training > materials, and the difficulty to obtain such. That said, I am quite > sympathetic to the concept of copyright protection, and protection of > intellectual property. > > There are many alternatives which can keep one within the bounds of > fairness, if not legality. Form a Study Group, and split the cost of a > subscription with several friends. Content oneself with the MANY excellent > materials available for free on the internet ( for example > http://joe.lindsay.net/bgp.html ) > > But please, don't ask folks here to do things that, in my opinion, at least, > should not be done. > > Chuck > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > kikpasa > Sent: Monday, July 24, 2000 12:16 PM > To: [EMAIL PROTECTED] > Subject: Part 1 - BGP Certzone white paper > > Hi, > Is there anyone out there with a copy of Part 1 Bgp of Certification > Zone's Whitepaper > > Please mail me a copy, this will be well appriciated. > > Kerry > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: documentation CD on windows 2000
Hey Jim, I got mine working using information from a post on this group. It had to do with a registry change from %programfiles% to c:\Program Files I'm sure it is in the archives on a few different occasions. OK Here one of them is from John Wu on June 16, 2000 > The Cisco Documentation CD works on Windows 2000. It's because the Verity > search engine does not use or recognize the search path. - %ProgramFiles%, > as you'll see in the registry. > > You need to modify the NT registry, Run REGEDT32, > > goto HKLM\Software\Microsoft\IE4\Setup and you'll see > Path=%programfiles%\Internet Explorer > > What you need to do is locate where your iexplore.exe is located and change > the path as needed. > So, if your iexplore.exe is located in C:, then change the path to > "C:\Program Files\Internet Explorer", otherwise substitute the correct drive > letter. The archives of this list is a tremendous resource! Vern Stitt AE, ASE, CCNA, MCSE "Jim Bond" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello, > > Does anyone have problems with documentation CD on > windows 2000? It doesn't work on my computers. > Thanks in advance. > > Jim > > __ > Do You Yahoo!? > Get Yahoo! Mail - Free email you can access from anywhere! > http://mail.yahoo.com/ > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: School Hook
Hey T Rex Ken, Both Windows 98 Second Edition and Windows 2000 support "Internet Connection Sharing". The system just needs a modem and a NIC. Internet Connec tion Sharing is a service that needs to be installed from the OS CD. The connection sharing system must provide Microsoft private IP Addresses to the other systems DHCP Style. This is not a great solution but it can be done very inexpensively. Vern Stitt CCNA, MCSE <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Ok guys I have a situation at a school I am working with in Mississippi. Not > sure if they will have ISDN/DSL access. So here is the problem, how can I > hook up 5 or more computers to the Internet with an analog line. If possible > what would be a good cheap source of the parts. Thanks > > Ken http://www.geocities.com/warrentonumc/ken.html">Ken's Page > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 2505 routers
Hey Dave, You could always download the TFTP server from the Cisco web site. http://www.cisco.com/pcgi-bin/tablebuild.pl/tftp The greatest thing a newbie can learn is that almost everything you need to know is somewhere on the Cisco web site. The biggest problem is finding your way around until you get a good sized and organized "Favorites" area saved. The last time I changed jobs, I saved my personal files and a lot of other stuff to CDs from my old notebook. I forgot to save a copy of my Internet Explorer "Favorites Folder". It took weeks to recreate it. Some of the obscure links required searches the archives of this group. The archives of this group is my second favorite place to find info, if the cisco web site search engine gives me trouble. Vern Stitt AE, ASE, CCNA, MCSE ""Dave Page"" <[EMAIL PROTECTED]> wrote in message 000301bfef97$9ad12080$[EMAIL PROTECTED]">news:000301bfef97$9ad12080$[EMAIL PROTECTED]... > > > Please help out a Cisco newbie with two naive questions: > > 1. The 2505 has two serial interfaces and 8 RJ-45 ethernet ports. Are the > 8 ethernet ports routable interfaces, or is it just the serial ports? My > hunch is that the ethernet ports just perform a hub function. > > 2. What qualifies as a TFTP server? My NT 4.0 server is an FTP server, > does that count? If it's possible, what has to be done to an NT box to make > it a TFTP server? > > Thanks in advance everyone! > > > Dave Page > > MCSE, MCP+I, A+ > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: DHCP and subnets
If you use a router for DHCP request forwarding using BOOTP IP Helper Address, the DHCP server will accurately assign IP addresses to the correct subnets from the correct scopes using the source IP address. That is unless the request comes from an Ethernet interface has multiple IP addresses assigned from different logical subnets. In that case, it seems to always assign an address from the scope of the lowest numerical IP network address assigned to that interface. Vern Stitt AE, ASE, CCNA, MCSE ""Dale E. Drummond"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > The DHCP server knows what scope to pick the ip address from by looking at > the GIADDR field in the DHCP packet. When the router helpers a DHCP > request to the DHCP server it populates the GIADDR address with the > primary ip address of the router interface that the DHCP broadcast request > was received on. When the DHCP server receives the request it looks at > the GIADDR field then looks to see if it has a scope that matches the ip > subnet of the address in the GIADDR fields. If it does it assigns an ip > from that subnet. > > Hope this helps. > > Dale > > > > Date: Sun, 16 Jul 2000 20:35:20 -0500 > From: [EMAIL PROTECTED] > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED] > Subject: RE: DHCP and subnets > > [ The following text is in the "iso-8859-1" character set. ] > [ Your display is set for the "US-ASCII" character set. ] > [ Some characters may be displayed incorrectly. ] > > My 2c on this . > > When the DHCP broadcasts crosses the router ,it carries that routers mask > and ip info across to the dhcp server ( assuming helpder is there) > > the DHCP server on seeing that the reqest came from that particular subnet > issues an ip from a scope ...U could configure multiple scopes and combine > them into one superscope to do this. Hope this helps. > > Cheers,Padhu > > -Original Message- > From: whatshakin > To: [EMAIL PROTECTED] > Sent: 7/16/00 12:11 PM > Subject: DHCP and subnets > > Hello folks, > Please clarify this for me. > > Hypothetical example: Campus LAN with multiple buildings. Each building > on its own vlan and with its own subnet addressing scheme. All buildings > tied in to a Catalyst 5500 which has RSP doing all the inter-vlan > routing. Data center using a single DHCP server with multiple scopes > (one scope per vlan/subnet etc) to supply all vlans/subnets with their > respective ip addresses. I want to understand how the DHCP server knows > how to hand out the correct ip address from the corresponding subnet to > the workstations that request them. I have come to believe that > initially DHCP servers have no idea whom is requesting an address, they > just hand them out to whoever asks...this is what is confusing. I > understand that each Vlan needs its own gateway address where the > workstations aim their broadcasts and there an ip helper-address > statement in the RSP for each vlan, but I still don't understand how the > DHCP server knows how to hand out the appropriate address when it has > multiple scopes enabled. > > TIA for any clarification you can offer. > > > > Dale E Drummond [EMAIL PROTECTED] >http://www.pobox.com/~dale/ > > > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Recertification
I just checked the certification tracking site. My CCNA 1.0 says: Valid Through Mar 21, 2003 This is exactly three years from the day I passed the test. Vern Stitt AE, ASE, CCNA 1.0, MCSE 4.0 ""Kevin Wigle"" <[EMAIL PROTECTED]> wrote in message 017001bfedf5$55910100$[EMAIL PROTECTED]">news:017001bfedf5$55910100$[EMAIL PROTECTED]... Group, Was on the Galton site to check if my CCDP kit had been mailed (it hasn't) and I noticed that both my CCNA/CCDA certifications now have the sentence: Valid through Apr 09 2002 (for the CCNA) next to them. My CCDP/CCNP certs don't have that yet. All my certs are still ver 1.0 (until I take FRS 2.0) So, has more information been released about re-certification? Kevin Wigle CCDP/CCNP
Re: Cisco VPN Software
Hey Daniel, I haven't seen the Cisco VPN Client 1.2 version yet. I do know that on a PIX, firmware 5.0.3 and below required version 1.0 and firmware 5.1 and above required version 1.1. I would advise sticking with 5.0.3 and 1.0 on a PIX just because of the PIX firmware stability. I do agree that the 1.1 VPN Client was easier to setup because the defaults were the settings I wanted. In 1.0 I had to adjust almost everything. Vern Stitt CCNA, MCSE, Etc. <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Make sure you download the 1.2 version (the latest one). It's much more > refined than the previous one and seems to have taken care of many of the > issues that I used to have. My speed seemed to increased quite a bit with > the new version but it's hard to tell if it was the new client or if I just > happened to get lucky with the bandwidth to my office. > > Has anyone had a chance to compare the Raptor Power VPN server/client with > Cisco's solution yet? > > Daniel > -Original Message- > From: Russell Lusignan [mailto:[EMAIL PROTECTED]] > Sent: Thursday, June 29, 2000 10:53 AM > To: [EMAIL PROTECTED] > Subject: Re: Cisco VPN Software > > > Cisco Secure VPN client is what your looking for > > http://www.cisco.com/kobayashi/sw-center/vpn/vpnclient/ > > Need CCO access to download it > > Hope that helps! > Russ.. > > > ""Dave Santeramo"" <[EMAIL PROTECTED]> wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Does Cisco make a VPN client to go with a VPN capable 2621? Can anyone > > recommend a free one if Cisco does not have one. > > > > > > > > ___ > > To get your own FREE ZDNet Onebox - FREE voicemail, email, and fax, > > all in one place - sign up today at http://www.zdnetonebox.com > > > > ___ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > --- > > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Using off the shelf DRAM in cisco 3620
Hey Greg, A standard EDO 8x32 60 ns is a 32MB SIMM. A standard EDO 16MB 60ns SIMM would be 4x32. 32 bits / 8 bits per byte = 4 bytes per 32 bits. Slightly off topic - x36 = 4 data bytes plus 4 parity bits Vern Stitt AE, ASE, CCNA, MCSE ""Greg Smythe"" <[EMAIL PROTECTED]> wrote in message 006501bfe119$263988c0$020b010a@ei">news:006501bfe119$263988c0$020b010a@ei... > The price that Cisco is charging for 16mb dram sticks is outrageous. $725 > for the MEM3620-16D!! I was looking on cisco's website and I found this: > http://www.cisco.com/warp/public/cc/cisco/mkt/access/3600/prodlit/544_pp.htm > > It looks like I can use a standard EDO 8x32 60ns 16MB stick and it'll work > fine. Anyone have any thoughts on using regular memory? I'd really like to > upgrade my DRAM so I can load bigger IOS images. > > > Thanks! > > > Greg > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: NAT Pool
How many unused registered addresses are available? How many simultaneous outgoing connections do you expect? NAT addresses are dynamically assigned one per outgoing connection. My advise is to save a group of addresses for static NATs and future growth, put most of the rest in a NAT pool and create an additional single address NAT pool for NAT overflow (PAT). Vern Stitt, AE, ASE, CCNA, MCSE ""Paco García"" <[EMAIL PROTECTED]> wrote in message 8i55cl$4ji$[EMAIL PROTECTED]">news:8i55cl$4ji$[EMAIL PROTECTED]... > Hi all: > > I have 150 computers for connect to internet, I have to configure a nat pool > to this connection, How many addresses I have to configure into the pool, > for more efficient translation? > > Thanks > > > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CSMA/CD : full duplex
It is my understanding that the CSMA/CD function is handled by the switch internally before the output frame is sent to the device. We recently had a thread on late collisions that mentioned as a possible source a NIC set to full-duplex that was connected to a half-duplex hub. Since CSMA/CD was disabled, the NIC would transmit anytime it felt like it without checking first. This could cause a late collision if the subnet already had a packet in progress. Vern Stitt, AE, ASE, CCNA, MCSE "woody" <[EMAIL PROTECTED]> wrote in message 8fbsfi$ec0$[EMAIL PROTECTED]">news:8fbsfi$ec0$[EMAIL PROTECTED]... > Actually CSMA/CD is still required. When communicating through a switch, > the TX (towards the switch) is guaranteed the full bandwidth towards the > switch. However the inbound (RX from the switch) may be carrying traffic > from more than one originating host. As such, collisions may still occur if > more than on of these hosts tries to talk to the same destination at the > same time. > > A basic switch (without VLANS and fancy Layer 3 functionality) creates > bandwidth domains but NOT broadcast domains. As such it will still flood > broadcasts and multicasts to all ports - again creating opportunity for > collisions that require CSMA/CD arbitration. > > Full duplex increases throughput as less traffic is forwarded to end devices > (cuts out unicasts not addressed to the attached devices) but does not > guarantee collisionless connectivity. CSMA/CD is required to handle the > collisions that do occur. > > Keith > > > ""Joe Martin"" <[EMAIL PROTECTED]> wrote in message > 8fbq4s$80t$[EMAIL PROTECTED]">news:8fbq4s$80t$[EMAIL PROTECTED]... > > Full duplex transmission requires a point to point connection between two > > devices. This is achieved using a switch. Since the connection is > between > > two and only two devices at a time, this allows them to transmit and > receive > > at the same time. Thus a collision would never occur and CSMA/CD is > > unnecessary. > > > > JOE > > CCNP, CCDP, and a few other things... > > > > > > "Dan West" <[EMAIL PROTECTED]> wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Sorry to ask such a simple question--but the CCNA book > > > is still unclear as to what's going on. > > > > > > Half-duplex ethernet uses CSMA/CD for arbitration on > > > the link. Does full duplex use it as well for > > > arbitration? The book makes it sound like if you are > > > running full-duplex that the CSMA/CD is not necessary. > > > It mentions half-duplex looping a duplicate frame onto > > > the recieve wire from the transmit wire. > > > > > > Thanks. > > > > > > __ > > > Do You Yahoo!? > > > Send instant messages & get email alerts with Yahoo! Messenger. > > > http://im.yahoo.com/ > > > > > > ___ > > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > --- > > > > > > ___ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > --- > > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CSMA/CD : full duplex
Full duplex does not require CSMA/CD. Full duplex requires a switch. Transmit and receive are done on separate wires to a switch. The switch then performs all arbitration internally. This theoretically makes 200Mbps possible, if the transmit and receive pipes are both kept full at 100Mbps. Half duplex was originally done on a single wire (10base5 and 10base2) so the receive wire and the transmit wire were the same wire. 10baseT only changed the physical media but it still "acts" like a single wire if it is attached to a hub rather than a switch. In this case, CSMA/CD (Carrier Sense Multiple Access with Collision Detect) must be used by all users of the 10baseT hub, 10base2 or 10base5. Vern Stitt, AE, ASE, CCNA, MCSE Dan West <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Sorry to ask such a simple question--but the CCNA book > is still unclear as to what's going on. > > Half-duplex ethernet uses CSMA/CD for arbitration on > the link. Does full duplex use it as well for > arbitration? The book makes it sound like if you are > running full-duplex that the CSMA/CD is not necessary. > It mentions half-duplex looping a duplicate frame onto > the recieve wire from the transmit wire. > > Thanks. > > __ > Do You Yahoo!? > Send instant messages & get email alerts with Yahoo! Messenger. > http://im.yahoo.com/ > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: KBPS
As a general rule, Kbps = Kilo bits per second - usually used on serial (one bit at a time) links, such as ethernet or communications lines. KBps = Kilo Bytes per second - usually used on bus (bits in parallel data paths) links such as memory SIMM busses or SCSI busses. Vern Stitt, AE, ASE, CCNA, MCSE Cisco Study <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > > i have one basic question that 64 Kbps means 64 kilo > bits per sec. or 64 kilo bytes per sec > > thanks in advance > > regards, > > > __ > Do You Yahoo!? > Send instant messages & get email alerts with Yahoo! Messenger. > http://im.yahoo.com/ > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]