How do I priorities traffic or allocate bandwidth for a specific user over a
WAN link. I have a 1601 connected to a 2600 router.
Thanks
Johan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57274&t=57274
--
FAQ, list archives, and
Hi,
I have a WAN connection with a 1601 router connected to the "core" router
which is a 2600 series
router.
I want to allocate bandwidth to a specific IP address/or priorities any
traffic for that users IP
address. How do I do that?
Thanks
Johan
Message Posted at:
http://www.groupstudy.com/f
No SNA on the blueprint means no SNA on the test. I took it a few months ago
and didn't have any either.
Tim
""David"" wrote in message
news:200211120415.EAA12014@;groupstudy.com...
> Hi folks,
>
> The CID exam. The Cisco has a lot of SNA content in it,
> however I can't find any SNA stuff at (e
although that should have worked, try clear ip access-list counter as
well I just tested this on a 3662 and both commands worked (IOS 12.1)
Tim
""John Tafasi"" wrote in message
news:20022125.VAA01591@;groupstudy.com...
> Can some one tell me how to clear access-list counters? I tried to
Hi All,
We also having the same situation. Actually, if you really want to do the
load balance, you need to know what's your customer mostly going, it also
can be captured by the cache server whcih place in between your router and
ISP. As some cache server will record the traffic pattern for your
Assuming you get a raise to buy that $300 leather jacket ;->
-Original Message-
From: [EMAIL PROTECTED] [mailto:nobody@;groupstudy.com] On Behalf Of
The Long and Winding Road
Sent: Monday, November 11, 2002 10:08 PM
To: [EMAIL PROTECTED]
Subject: Re: 2 Questions [7:57257]
""LOON"" wrote
Hi folks,
The CID exam. The Cisco has a lot of SNA content in it,
however I can't find any SNA stuff at (excuse wrapping)
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/current_exams/640-025.html
I can't find anything about changes on Cisco's website,
so...does the CID have any
Hi,
Has anyone taken the IP telephony exam(9e0-402) recently ?I just want to know
how whether the IP telephony book by David Lovell is sufficient.Can also let
me know with any other links (CCO) and materials you used to pass the exam.
Kind Regards/Thangavel
**Disclaimer***
I wasn't aware that 3.1 was out. I was told way back when that 3.1 would
include CRL support by TAC , but considering my recent troubles with TAC, it
doesn't surprise me.
I agree with the stolen laptop, but your expecting the typical user to
actually think. If they do actually ( send them a bonus
The default window size for modern implementations of TCP on modern
operating systems is bigger than 4080 bytes anyway. No change will probably
be necessary. The window size varies as clients and servers ACK data, but it
should start out at 8192 or greater, depending on the OS.
Are you wondering a
""LOON"" wrote in message
news:200211120210.CAA20443@;groupstudy.com...
> 1. Where should one start to prepare for the CCIE written exam, what kind
of
> approach?
as always, begin at the beginning
www.cisco.com/go/ccie
> 2. What are the benefits or privileges associated with the CCIE?
in toda
a couple of things - in line below
""bergenpeak"" wrote in message
news:200211120028.AAA03239@;groupstudy.com...
> Suppose I have several routers making up an iBGP mesh. Lets
> suppose I have two routers (R1 and R2) which are advertising the same
> set of networks: N1, N2, ... Nk.
>
> OSPF is
I have been recieving very few emails and a sent an email several days ago i
never seen come back to me. Is there a problem with the list?
_
Protect your PC - get McAfee.com VirusScan Online
http://clinic.mcafee.com/clinic/ibuy/
If I have a working network, for example (2) 3550 switches are connected to
(2) 6509s. The first 3550 is in VLAN 10 connected to both 6509s, and the
second 3550 is in VLAN 11 again connected to both 6509s. I like to add one
more 3550 switch (24) ports in VLAN 10 and the other (24) ports in VLAN
paul,
When I talked about IPSec, I mean to say that AES is not currently supported
on
on Pix Firewalls on any VPN concentrator. After I established connection
via
EAP/TLS on the wireless network, I have to make another IPSec connection via
Cisco VPN client to make a secure connection to the intern
HI All,
Thx for your reply and I really appreciate your explaination.
I know that my customer is very difficult to use the whole BW in the high
delay time environment.
But I need to tell him what's the max throughput.
So that's why I need to tell him how they can do in their computer / network
start here:
http://www.cisco.com/warp/public/625/ccie/exam_preparation/preparation.html
and read/ask questions here and also try alt.certification.cisco
""LOON"" wrote in message
news:200211120210.CAA20443@;groupstudy.com...
> 1. Where should one start to prepare for the CCIE written exam, wha
1. Where should one start to prepare for the CCIE written exam, what kind of
approach?
2. What are the benefits or privileges associated with the CCIE?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57257&t=57257
--
FAQ, list arc
Some notes/opinions:
1. A stolen laptop should trigger an employee to contact Human
Resources, Security and/or IS. Anything less on the part of said
employee is cause for termination - period. Alternatively, if the
perceived threat is via corporate/military espionage, then the
short-term solution
Suppose I have several routers making up an iBGP mesh. Lets
suppose I have two routers (R1 and R2) which are advertising the same
set of networks: N1, N2, ... Nk.
OSPF is running underneath BGP (assume area 0). All of the N
networks are being advertised with a next-hop set to the respective
lo
Going back to the original e-mail question.
I disagree that EAP-TLS is not a solution for sniffing. Technically any
wireless data can be sniffed, regardless of encryption. However, it will be
garbage until decoded. If you use EAP-TLS and set the rekeying to a very
short interval ( say 1 minute ) y
Hmm.. configs and routing tables might give a clue.
My guess is that your serial line is still seen as the preferred route.
By the way, be aware that depending on the bandwidth of your serial link,
and your configuration, the "extra" bandwidth of the ISDN may be more
hindrance than help. I haven'
The bootstrap is loaded in the bootROM (read-only) unless you have a 2691
which is a non-FRU. If you go to the link below, it will guide you on the
replacement procedure. I ordered the chips over the phone through the cust
svc line (800)553-6387, option 2 then 6. I don't know what the going rate
is
Hi Mike,
If I correctly understand your answer, EAP-TLS is the standard way
to get authenticated (to a Radius) and then deploying encryption
through IPSec?
I took a look at 802.11i and its near-term subset WPA from Wi-Fi
alliance, and it seems that near-term solutions are still based
in 3DES and
Hi Vicky,
Thank you for your answer but although I'm interested in almost
every possible way to secure that kind of network, I rather prefer
standard solutions not based on vendor-hardware.
Anyway, could you give me and the rest of the list a link about
the product you were referring to?
Thanks
> Hi all,
> I am looking for a new bootstrap image for a 2600 as mine currently
> is running 11.3 I would like to upgrade this to 12.1 to match my ios
> My problem is after searching and searching on CCO I am unable to find an
> image now am I going crazy or is there no image to find.
>
> T
restart the router.
--
Curious
MCSE, CCNP
""John Tafasi"" wrote in message
news:20022125.VAA01591@;groupstudy.com...
> Can some one tell me how to clear access-list counters? I tried to use the
> command "clear access-list counters" but it did not work. Please see the
> output of the show c
Hi All,
Sorry the OT post. I have the following items available for sale:
1 Cisco 2513 with 8MB of RAM and 16MB Flash,
1 Cisco 4500 router with 16MB of RAM and 8MB of Flash. This router has 2
Ethernet interfaces and 4 Serial interfaces,
1 Cisco Pix 16MB Flash (with box and documentation). I
Cliff Cliff wrote:
>
> Dear all,
>
> One of our customer want to know the simply way to calculate
> the throughput in their link.
Calculating throughput can be difficult. Your customer should measure actual
throughput for a typical case, using a protocol analyzer or one of the many
other tools f
I have Site A which acts as a host for incoming fiber connections from
Sites B,C, and D. All 4 sites are on different subnets. At Site A a
Catalyst 3550G with 12 available fiber GBIC connections is what the 3
incoming sites B,C, and D connect to on GBIC interfaces 1,2, and 3,
respectively.. The 35
Hello,Does anyone know of any CCIE Labs for rent in the Wash. DC/VA/MD
area? I am looking for any rentals, where I could be there physically
present - same deal as renting it remotely but just like to be present
physically.I would also like to ask any one studying for the CCIE Lab in
this area whe
Hi all,
I build an OSPF config between one cisco box and a zebra openbsd.
LAN1 ZEBRA == (GRE Tunnel over Internet) == CISCO -- LAN2
Because I had some problem on the openbsd to encapsulate multicast hello
packets in GRE, I used the ospf network type : non broadcast.
My config is :
int
Can some one tell me how to clear access-list counters? I tried to use the
command "clear access-list counters" but it did not work. Please see the
output of the show command below.
R5-2503#show access-lis abc
Extended IP access list abc
Dynamic test permit ip any any
permit ip any any (
Hi all,
Pls ignore my earlier mail.
You can use the default-information originate command under router rip to do
this.
You can also use the default-network command, but make sure you have a route
to that network in the routing table.
Hope this helps.
rgds,
Murali
Murali Das wrote:
Hi All,
As p
34 matches
Mail list logo
