I'm rolling out an install for about 30 sites using the 3002 coming back to
a 3060 and I ran into a similar issue. I will insert this caveat that I am
not running network extension mode. Good ole' NAT/PAT for me...
Anyway, when I would monitor my sessions there was always one site that had
a
I've always used the Dolch products. I believe the one that I've used was a
Dolch 64. You can get a variety of network card for it from 10/100, Token
Ring, FDDI, and ATM. Of course the prices will vary depending on the cards,
memory, etc, but they usually run around 10-15K. Not cheap, but it c
Yeah, we can all use Paypal
Eric
-Original Message-
From: Dennis Laganiere [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 12, 2001 11:18 AM
To: [EMAIL PROTECTED]
Subject: RE: GroupStudy we have a problem [7:28901]
If we wanted to contribute a few dollars to the cause, wha
Okay I know that you may be getting sick of my sniffer questions since this
is the second one this week, but I've never seen this before, so here goes.
I'm using good ole' Etherpeek and while monitoring a network I started
getting duplicate IP address errors. After further investigation Etherpee
To all,
I'm monitoring a network and I'm seeing high network utilization
levels on the main (only) network segment. My question is that I've always
heard the rule is 60-70% and your in trouble and can start experiencing
network degradation. Now my question is where can I find this in wri
I'm shooting to have it before either of my kidsone is 18mo and the
other is due in November! At least I have the lab scheduled!!
Eric
-Original Message-
From: Wright, Jeremy [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 25, 2001 1:51 PM
To: [EMAIL PROTECTED]
Subject: RE: OT R
Quick question regarding some alarms that I'm receiving on a ACS NT server.
The errors are stating that certain process CSAuth, CSMon, CSTacacs, are
being stopped and the five seconds later they are started again. This
happens everyday and I found out that this is being caused by the Windows NT
S
If you have a CCO login you can use the IOS feature navigator.
http://www.cisco.com/cgi-bin/Support/FeatureNav/FN1.pl?HStartForm2=True
If not I checked it out and you will need at least 12.0(10) to run BGP.
Hope this helps!!
Eric
-Original Message-
From: Cisco Nuts [mailto:[EMAIL PROTE
Actually I books a block of time for Monday (9/10) yesterday morning after I
read Mark's original email. A couple of minutes later I received
confirmation and I'm all set for Monday. That's just what happened for me
though. :-> Hope everyone has a great weekend!
GO CHIEFS!!!
Eric
-Origin
Does anyone out here know if there is a Cisco users group in Kansas City?
I've tried looking on the web and I found a site, but it isn't operational.
Short of calling our local office I was wondering if anyone out here was a
member and if so if there was a website or anyway to sign up. Thanks!!!
These topic were removed from the lab, not the written. These topics could
still appear on the written exam. Hope this clears things up!
Eric
-Original Message-
From: Kenneth Yeung [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 13, 2001 11:47 PM
To: [EMAIL PROTECTED]
Subject: RE: CCIE
ts )
>
> thanks for pointing this out.
>
> Chuck
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> McMasters, Eric
> Sent: Friday, July 13, 2001 7:56 AM
> To: [EMAIL PROTECTED]
> Subject: Cisco 7400 router... [7:12275]
>
those unused slots that always drive
customers nuts )
thanks for pointing this out.
Chuck
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
McMasters, Eric
Sent: Friday, July 13, 2001 7:56 AM
To: [EMAIL PROTECTED]
Subject: Cisco 7400 router... [7:12275]
I was just wondering if anyone out there has had a chance to work on this
new box. I was poking around CCO yesterday and this seems like a very cool
router, but I was just curious if anyone has actually worked with it. It
looks like it is using the same NPE processor that you can get with the 72
I just wanted to drop everyone a line and say that I passed my CCIE Written
today on the first try!! It was pretty much what I was expecting, but there
were those obscure areas that got me. Just to go ahead and beat the rush of
email asking what I used to study here ya' go
Bridges, Routers,
Setting up site to site w/two PIXes is very similar to setting it w/two
routers. You can even setup router to pix if you wanted to. If you go to
Cisco and do a search on "pix to pix vpn" it will come back with
configuration examples. I have set it up w/pix to pix and router to pix,
but not rout
Jason,
Thanks for the info on the exam. I'm scheduled to take it on the 21st. I
just wanted to shed some light on the CPSM/IDS products. The IDS Director
software from what I could find was the original software that NetRanger
used. It would plug in with HPOV, but Cisco is phasing the Direct
I've been using Pumpkin for about 3 years now and have never had any
problems. A Cisco SE told me about it and he recommended it above the Cisco
tftp software, and after using I have to agree. I don't use anything else.
Hope this helps!
Eric
-Original Message-
From: Jim Yam
To: [EMAIL
I have a quick question for the group here. Is there a Linux or Unix based
VPN client that is compatible with the 3000 series concentrators. I have
been searching for a couple of days now, and all that I have found about a
Linux/Unix VPN client is in reference to the 5000 concentrator or the
"Un
I just received a copy of this from one of my co-workers and thought it was
pretty cool. I know some of you folks that have been around this field for
awhile have probably seen this, but for those who haven't seen this enjoy.
Spanning Tree Fundamentals
Too bad your not staying in KC because I have a rack I would sell you!
Anyway, I found that music stores that sell amps/mixers usually sell those
type of boxes with the racks built in. I did some checking and they are
pretty reasonable and would fit the need. Anyway while your in KC you have
to
Hey there everyone I was wondering if anyone had any good resources, such as
white papers, etc on broadband wireless technology. I'm looking for both
high level documentation and some down and dirty stuff also, so that I can
become familiar with this technology. I've been checking out the Cisco
I was a member of this club and I think it was a pretty good deal. You only
had to buy one or two more books at regular club prices and then your
obligation was over. Also, every time you signed someone up under you they
got the discounted books and they you could pick up to $120 or 3 books for
I just wanted to drop a line to the list to let everyone know that I'm
dropping off of the list for a few weeks. I have accepted a position with a
consulting company here in the KC area, so I will be out of the loop for
awhile. I have been a member of this list for a couple of years now and I
wi
When we started purchasing 6509's our Cisco NSA Engineer advised us not to
use the integrated IOS because there are some major bugs that are associated
with it that have not been addressed. Now this was a couple of months ago,
so maybe these issues have been addressed, but I would do some investi
o let down his guard."
- Sun Tzu, The Art of War
-Original Message-
From: Jim Brown [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 26, 2000 3:43 PM
To: 'McMasters, Eric'; Jim Brown; 'hal9001'; Cisco Kid;
[EMAIL PROTECTED]
Subject: RE: Exam for CCDP Cert
There
At the tracking site they have two separate certs, CCDP 1.0 and 2.0. All of
the certs are good for 3 years before you have to recertify. That is at
least what the tracking site shows. My suggestion would be to take get the
CCNP 2.0 and then take the CID 3.0 (640-025), so you can be a CCDP 1.0 a
Well it wasn't listed on the updated price listing (9/26), so after checking
the link that you sent I found this: "The model numbers and information for
the Cisco 2600 and 3600 will be available CYQ1 2001." I'm assuming that
pricing will be available at that time also, but you might want to chec
Here is a good link to descriptions and features of the specific Service
Provider IOS sets. They talk about the 7000 series and 12000 series and the
different options, but it will tell you what is supported and what isn't.
Hopefully this will answer any questions that you may have concerning the
Certificate and card yes. You can download the logo after accepting an
agreement at the Galton tracking site. No to the T-shirt. They don't do
that anymore. Here is a link to the Certification FAQ's site. The
questions that you asked are addressed in questions # 16 - 18. Hope this
answers so
I would have to agree with David. After initially reading the question I
also thought ISL. However, even though ISL is a proprietary Cisco protocol
it isn't limited to just Cat's, and I think that is what the person asking
the question was looking for. I do however think that it is a poorly wor
Comments in line. I can't remember what the Switching passing score was.
Hope this helps at least some
Eric L. McMasters, CCNP/CCDA
OSSN - Sr. Network Engineer
Phone:913.859.1986
PCS:913.485.9734
Fax: 913.859.1234
"Feign inferiority to encourage your enemy's arrogance.
I guy that I work with forwarded me this link, and it is a real hoot! It
starts off by the guy who originally wrote the PING code for Unix talking
about PING, etc. The funny part is at the end reading the book reviews. I
don't know if this is valid, but none the less entertaining. A good way t
Check out Alliance Datacom at, www.alliancedatacom.com. They are the
cheapest that I have found so far. A WIC-1T runs goes for $225 there, plus
they have a good selection. Hope this helps.
Eric L. McMasters, CCNP/CCDA
OSSN - Sr. Network Engineer
Phone:913.859.1986
PCS:913.485.973
That also falls in-line with when we wanted to see what "debug all" would do
on the core router. After about a minute of continuous logging messages it
just stopped working. Again we had to reboot the router and we were somehow
able to blame it on the server guys! "Sir, the NT servers were gene
Sorry about forgetting the link...here ya' go!
http://www.cisco.com/warp/public/cc/pd/rt/3600/prodlit/544_pp.htm
Eric L. McMasters, CCNP/CCDA
OSSN - Sr. Network Engineer
Phone:913.859.1986
PCS:913.485.9734
Fax: 913.859.1234
-Original Message-
From: John Gesualdi [m
John,
By default the 3600 series does a 75/25 split of the DRAM and
allocates the 75% to processor memory and the 25% to I/O memory. This can
be changed to reflect a 70/30, 60/40, or a 50/50 split of this memory. The
I/O memory is automatically adjusted to reflect the modules that are
in
Here is a link to a free Cisco T-shirt. Just play their little soccer game
and then register for the T-shirt. Enjoy!
http://www.cisco.com/offer/rsgameplan/V429-493X2
Eric L. McMasters, CCNP/CCDA
OSSN - Sr. Network Engineer
Phone:913.859.1986
PCS:913.485.9734
Fax: 913.859.1
I sent this question to Cisco Training a couple of weeks ago and I finally
got a response, so here ya' go.
Dear Sir:
The CID Exam is not scheduled for revision.
If you have further questions or concerns, please feel free to contact us
at 1.800.829.6387 (option 2,1).
Eric L. McMasters, CCNP/CC
Okay I have been looking for this answer and I still can't find it, so I am
bringing my question to all of the OSPF guru's that reside on this list.
Here is what I want to know.
I know that you can run multiple routing processes on a single router, i.e.
router ospf 1 and router ospf 2
Now will th
My interpretation of the examples that are presented are that the first
configuration will work, but will the second. Now, I am by no means an
expert, but I found in my handy dandy "Internetwork Troubleshooting
Handbook" where their example does not include the standby group number. I
also read
I just had a quick question to pose to the group and I apologize for it
being OT. My question is this: What level of agreement do you have to have
with Cisco for them not to be able to talk to employees about working for
Cisco? We are a named account and I was contacted by Cisco last week about
I just wanted to drop the list a line so that I could thank everyone for
helping me achieve CCNP yesterday. I successfully completed the Support 2.0
exam, which now makes me a newly minted CCNP v2. I would just like to
express my gratitude to the people on this list and there are too many to
nam
I agree with Brad. I work with two Unix guys that passed the CCNA just from
reading one book, and I'm not even sure they know what a router looks like.
In fact one guys tried to turn on RIP in our lab and couldn't figure out why
it wouldn't work. So I took a look at it and told him it would work
To All,
I've been trying to post this for the past three days, so if it is
duplicate for some I apologize in advance. The results were posted last
Friday and I already received my score sheet from Sylvan, so to say the
least I was surprised that I passed. I just wanted to pose a question
q921 is debugging layer 2 information and q931 debugs layer 3 information.
Just remember the middle number and relate it to the appropriate layer.
Eric L. McMasters, CCNA/CCDA
OSSN - Sr. Network Engineer
Phone:913.859.1986
PCS:913.485.9734
Fax: 913.859.1234
-Original Me
46 matches
Mail list logo