RE: New member

, 19 January 2015 12:25 PM To: legacy-ornamental-mills@googlegroups.com Subject: New member Just discovered this site and excited to be part of group. I have a 900 that I got at an estate sale with all the attachments for $500.00 and am eager to use it more. I think it is a fantastic machine

Re: New member

Welcome to the group. You have the most important tool. Willingness to learn. You'll do fine. Mike OK On 1/18/2015 7:24 PM, jack snyder wrote: Just discovered this site and excited to be part of group. I have a 900 that I got at an estate sale with all the attachments for $500.00 and am ea

Re: New member

are ideal for the Legacy http://www.magnate.net/searchresults.asp?cat=23 . "Well" that is for now. Again I would like to say Welcome. Have a great day, C.A.G. - Original Message - From: "jack snyder" To: legacy-ornamental-mills@googlegroups.com Sent: Sunday, January 18, 2015

New member

Just discovered this site and excited to be part of group. I have a 900 that I got at an estate sale with all the attachments for $500.00 and am eager to use it more. I think it is a fantastic machine. Look forward to learning more about the mill. Thanks -- You received this message because yo

New Member

I have a Legacy 1500 mill that I bought used. I would like to find training videos or someone in my area that may know about this machine. I am in Greenville South Carolina. It looks like a great machine, but a little intimidating. Can anyone help? Mark -- You received this message because y

Re: New Member: Dusty-Lonesome

Thanks for the welcoming replies, looking forward to learning from this group. When I first start using the mill I ran smack dab into the learning curve and was pressed for time to complete a commission so I abandoned it for lathe, then the recession hit. Do I need to say more? Now I'm not so

Re: New Member: Dusty-Lonesome

at's our main goal. > > I hope you have a great day, And good luck on your next project. > > C.A.G. > > - Original Message - > From: Okla Mike (Liltwisted) > To: legacy-ornamental-mills@googlegroups.com > Sent: Saturday, October 19, 2013 11:02 AM > Subject: Re: New Memb

Re: New Member: Dusty-Lonesome

grow and that's our main goal. I hope you have a great day, And good luck on your next project. C.A.G. - Original Message - From: Okla Mike (Liltwisted) To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, October 19, 2013 11:02 AM Subject: Re: New Member: D

Re: New Member: Dusty-Lonesome

group. Mike ** *From:*legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Louis Brown *Sent:* Saturday, October 19, 2013 9:48 AM *To:* Legacy Ornamental Mills *Subject:* Re: New Member: Dusty-Lonesome Hello Don, I get the sense that i

RE: New Member: Dusty-Lonesome

Sent: Saturday, October 19, 2013 9:48 AM To: Legacy Ornamental Mills Subject: Re: New Member: Dusty-Lonesome Hello Don, I get the sense that if you are not trying to get rail, you have a good chance of getting other parts, but it might take a while. Welcome, Begat On Thu, Oct 10, 2013

Re: New Member: Dusty-Lonesome

Hello Don, I get the sense that if you are not trying to get rail, you have a good chance of getting other parts, but it might take a while. Welcome, Begat On Thu, Oct 10, 2013 at 2:52 PM, wrote: > Hello, > > My name is Don (Dusty-Lonesome) and I have a model 1200 which I purchased > in 2005

New Member: Dusty-Lonesome

Hello, My name is Don (Dusty-Lonesome) and I have a model 1200 which I purchased in 2005. I purchased it to use in my custom furniture business but the recession had other ideas and it has been sitting untouched for the last few years. Recently I had a need for an overhead router but having

Re: New Member

. Look back at the old messages and let's talk from there. -Tim - Original Message - From: Dewell To: legacy-ornamental-mills@googlegroups.com Sent: Friday, August 02, 2013 12:14 AM Subject: New Member Hello, I purchase a LOM 900 recently. I would like to ge

Re: New Member

ave been to Bradenton a number of times - and I know how vulnerable you are right there on the Gulf.Cheers.Mac-Original Message- From: Dewell Sent: Aug 2, 2013 3:14 AM To: legacy-ornamental-mills@googlegroups.com Subject: New Member Hello, I purchase a LOM 900 recently. I would like to get

New Member

Hello, I purchase a LOM 900 recently. I would like to get a copy of the assembly instructions and also the owner's manual if there is one. Also, unable to find a page on the LOM website for replacement parts. Any information of motorizing my 900 would be greatly appreciated. Thank you for your ti

Re: New Member with a couple of questions

ready for your reading. Wish me luck.) C.A.G. - Original Message - From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 24, 2013 1:27 AM Subject: Re: New Member with a couple of questions There is a brass 1/2" diameter by 3/4" long pie

Re: New Member with a couple of questions

2013 9:23 PM Subject: New Member with a couple of questions Hi, All - new to the group as I just picked up a Legacy 1000 (with a few parts missing) last weekend - appears to have never been used - still has protective paper on the router mount. Just to make some sawdust (since I do

Re: New Member with a couple of questions

: legacy-ornamental-mills@googlegroups.com Subject: New Member with a couple of questions Hi, All - new to the group as I just picked up a Legacy 1000 (with a few parts missing) last weekend - appears to have never been used - still has protective paper on the router mount.  Just to make some sawdust (since I

New Member with a couple of questions

Hi, All - new to the group as I just picked up a Legacy 1000 (with a few parts missing) last weekend - appears to have never been used - still has protective paper on the router mount. Just t

RE: New member

11 PM To: Legacy Ornamental Mills Subject: New member My name is Mike, I purchased a model 900 several years ago and have never used it much and don't really get any support from Legacy anymore and would like to learn how to use the thing. I think there must be a lot of tips and tricks to get

Re: New member

Hello Mike. Welcome. Can you tell us a little bit more about your self? what kind of stuff you like to make? what kind of wood working tools you have? stuff like that. (Think of it as an Ice breaker.) So the people with in the group can get to know a little bit more about you. C.A.G. On Mar 25, 3

New member

My name is Mike, I purchased a model 900 several years ago and have never used it much and don't really get any support from Legacy anymore and would like to learn how to use the thing. I think there must be a lot of tips and tricks to get the thing to work right. Been a amateur woodworker for la

Re: New Member

Welcome all new members, only rules here are to have fun and keep your digits. Then push the boundaries and modify Mike On 1/31/2013 9:28 PM, Tim Krause wrote: Hello All, We had a member join this week that owns a MA12, one of the original models. I hope he is finding the information that h

New Member

Hello All, We had a member join this week that owns a MA12, one of the original models. I hope he is finding the information that he is looking for. We have what I consider to be a real expert in this group on the Woodchuck models so if you have any unanswered questions, I would highly encou

Re: new member

nally settled on some 3 inch diameter wheels from Woodcraft which seem to be a good alternative. Thanks for you offer. Monte - Original Message - From: "curt george" To: legacy-ornamental-mills@googlegroups.com Sent: Monday, December 3, 2012 5:00:45 PM Subject: Re: new

Re: new member

He already got a suitable replacement at Woodcraft. -Tim - Original Message - From: curt george To: legacy-ornamental-mills@googlegroups.com Sent: Monday, December 03, 2012 2:00 PM Subject: Re: new member Hello Monte AND Welcome to the Group. Can you take a picture of

Re: new member

C.A.G. - Original Message - From: Barry Clarke To: legacy-ornamental-mills@googlegroups.com Sent: Monday, December 03, 2012 8:21 AM Subject: Re: new member Welcome, On 2012-12-03, at 8:04 AM, cwhitha...@comcast.net wrote: Hi All, I am pleased to join the grou

Re: new member

Hello Monte, Welcome to the group. And good luck finding new wheels. Begat On Monday, December 3, 2012 8:04:28 AM UTC-5, cwhit...@comcast.net wrote: > > Hi All, > > > > I am pleased to join the group. My name is Charles but I go by Monte > (middle name is Lamont). I have Legacy 900 machine w

Re: new member

yes welcome Bill - Original Message - From: Ccm Ccm To: legacy-ornamental-mills@googlegroups.com Sent: Tuesday, December 04, 2012 12:31 AM Subject: Re: new member Monte welcome aboard On Mon, Dec 3, 2012 at 7:04 AM, wrote: Hi All, I am pleased to join the

Re: new member

Welcome, On 2012-12-03, at 8:04 AM, cwhitha...@comcast.net wrote: > Hi All, > > I am pleased to join the group. My name is Charles but I go by Monte (middle > name is Lamont). I have Legacy 900 machine with a number of options one of > which, the mobility accessory (5" casters), began to disin

new member

Hi All, I am pleased to join the group. My name is Charles but I go by Monte (middle name is Lamont). I have Legacy 900 machine with a number of options one of which, the mobility accessory (5" casters), began to disintegrate. I attempted to order replacements only to be told that Legacy's

Re: New Member

Well some day when my shop is put back together ,my lathe is a old south end lathe,6' bed,back geared,with 13" throw, I brought it years ago to make steam engine parts,lost interest in it,moved and now everything is scattered between home & my sons house.when I finish with my kitchen remodel pro

Re: New Member

@googlegroups.com Sent: Sunday, October 14, 2012 2:23 PM Subject: Re: New Member Someday if you have time I would like to see your shop. Maybe we could share ideas or help each orher out. On Sat, Oct 13, 2012 at 5:33 PM, Bill Sullivan wrote: Harvey, I have a 13" south bend lathe

Re: New Member

Someday if you have time I would like to see your shop. Maybe we could share ideas or help each orher out. On Sat, Oct 13, 2012 at 5:33 PM, Bill Sullivan wrote: > Harvey, > I have a 13" south bend lathe,also need to set it up though. > Bill > > -- > > > --

Re: New Member

ances you have to keep them the same,) Have a good night. C.A.G. - Original Message - From: "Bill Sullivan" To: Sent: Saturday, October 13, 2012 6:33 PM Subject: Re: New Member Harvey, I have a 13" south bend lathe,also need to set it up though. Bill -- --

Re: New Member

Harvey, I have a 13" south bend lathe,also need to set it up though. Bill --

Re: New Member

Tim, No I checked it out ,was thinking about it when the mill I got came on Craig's list,price was to good to pass up. Bill --

Re: New Member

Welcome to the group. Did Harvey sell his machine to you? -Tim - Original Message - From: "Bill Sullivan" To: Sent: Wednesday, October 10, 2012 10:50 AM Subject: New Member Hello all I would like to introduce myself ,my name is Bill Sullivan,I just joined the legacy ornam

Re: New member ,intro

ur advice On Wed, Oct 10, 2012 at 4:40 PM, curt george wrote: > Hello again Bill. > Welcome. > And thank Harvey for adding one new member to our group. > Bill where do you live? and do you have any other turning equipment, like > a lathe at your disposal? > Do you have any plan

Re: New member ,intro

ginal Message - From: "Bill Sullivan" To: Sent: Wednesday, October 10, 2012 7:56 PM Subject: Re: New member ,intro Curtis,I live in the Slinger,Wi area.north of Milwaukee.I have your typical wood working tools,table saw,band saw,planer,drill press, and now a legacy 1000 .I would l

Re: New member ,intro

Curtis,I live in the Slinger,Wi area.north of Milwaukee.I have your typical wood working tools,table saw,band saw,planer,drill press, and now a legacy 1000 .I would like to learn to turn spiral walking sticks ,but I have to learn How this mill works first.I have to go through the mill & make sur

Re: New Member

Bill, glad you could join us, Roger On Wed, Oct 10, 2012 at 5:14 PM, Okla Mike (Liltwisted) < legacym...@iglide.net> wrote: > Welcome Bill, > Nice to have you aboard. Or .. a board > either way. Settle in and ask as many questions as you can, it's > refreshing to the old knots in the group an

Re: New Member

Welcome Bill, Nice to have you aboard. Or .. a board either way. Settle in and ask as many questions as you can, it's refreshing to the old knots in the group and you may just stumble across something we haven't whittled on yet. Mike On 10/10/2012 12:50 PM, Bill Sullivan wrote: Hello all

Re: New member ,intro

Hello again Bill. Welcome. And thank Harvey for adding one new member to our group. Bill where do you live? and do you have any other turning equipment, like a lathe at your disposal? Do you have any plans or ideas to make on your Legacy right off the bat, or are you just going to fool around a

Re: New Member

well from one Bill to another welcome the group a very nice bunch of men and women on here and a world of info on what ever you want to try and do on a legacy Bill B - Original Message - From: "Bill Sullivan" To: Sent: Thursday, October 11, 2012 4:50 AM Subject:

New member ,intro

Hello all I would like to introduce myself ,my name is Bill Sullivan,I just joined the legacy ornamental mill group ,also just purchased a mill .I would like to thank Tim Krause,Curt George for the help with getting a manual to help learn how to use My new toy.I hope to learn from & share with

New Member

Hello all I would like to introduce myself ,my name is Bill Sullivan,I just joined the legacy ornamental mill group ,also just purchased a mill .I would like to thank Tim Krause,Curt George for the help with getting a manual to help learn how to use My new toy.I hope to learn from & share with

Re: Gene (new member)

I have a 900 plus a CNC machine and i'm in Charlottesville, email me direct at myxpyka...@hotmail.com On Jun 1, 8:03 pm, "regal...@juno.com" wrote: > I just added my marker to the map.  Hope there is a member near Culpeper, VA -- You received this message because you are subscribed to the Googl

Gene (new member)

I just added my marker to the map. Hope there is a member near Culpeper, VA -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. To unsubscribe from this group

Re: A message form a new member

Curt, To mount the gearset simply remove the drive gear from the carriage drive and the index gear from the spindle shaft. The stock gearset will slide off and replace this set over shafts. Replace drive gear of choice and 180 tooth index gear and its done. I'll take a picture tomorrow. It looks

Re: A message form a new member

how many and what pitches you end up with. Bill - Original Message - From: Joe Gassen To: legacy-ornamental-mills@googlegroups.com Sent: Friday, March 02, 2012 12:27 PM Subject: Re: A message form a new member As for the home made idler that has a 60 tooth gear meshing with

Re: A message form a new member

e - > *From:* Joe Gassen > *To:* legacy-ornamental-mills@googlegroups.com > *Sent:* Thursday, March 01, 2012 8:10 PM > *Subject:* Re: A message form a new member > > Okay Tim, > I did as you suggested and did some measuring and counting > I used the 90 tooth drive gear a

Re: A message form a new member

That's a pretty neat set up! Thanks for sharing! C.A.G. - Original Message - From: Joe Gassen To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, March 01, 2012 8:27 PM Subject: Re: A message form a new member As for the home made idler that has a 60 tooth

Re: A message form a new member

o you know what your gear combinations will do for you so you can repeat the results when needed. -Tim - Original Message - From: Joe Gassen To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, March 01, 2012 5:27 PM Subject: Re: A message form a new member As fo

Re: A message form a new member

: Thursday, March 01, 2012 8:10 PM Subject: Re: A message form a new member Okay Tim, I did as you suggested and did some measuring and counting I used the 90 tooth drive gear and a 60 tooth idler and went one revolution on headstock, the carriage traveled "almost" 2 inches. I took sl

Re: A message form a new member

09:03:59 -0500 (EST) Subject: Re: A message form a new member its very hard to tell and I may be completely wrong here, but perhaps the double idler gear is used like back gears on a steel lathe. on some of the older metal lathes they used a similar set up to obtain very slow spindle speeds for

Re: A message form a new member

thought I would put to you all Bill - Original Message - From: curt george To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, February 29, 2012 8:11 PM Subject: Re: A message form a new member Good morning Everyone. Joe taking a closer look at your gears, it looks

Re: A message form a new member

To: legacy-ornamental-mills@googlegroups.com Sent: Tuesday, February 28, 2012 8:47 PM Subject: Re: A message form a new member Again, Thanks for all who have tried to help. I have looked through back postings and found the sketch below which puts me on the right track, but i have a few more que

Re: A message form a new member

gt; > >   - Original Message - >   From: Tim Krause >   To: legacy-ornamental-mills@googlegroups.com >   Sent: Tuesday, February 28, 2012 6:35 PM >   Subject: Re: A message form a new member > >   You have some bizarre gears there.  The six in the first photo are all >

Re: A message form a new member

From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Tuesday, February 28, 2012 6:35 PM Subject: Re: A message form a new member You have some bizarre gears there. The six in the first photo are all stock normal gears. The dual idlers is probably used with the y-shape

Re: A message form a new member

.5" If you are getting longer or shorter lengths then the added gears are reducing the pitch or multiplying them. I hope this helps a little bit? -Tim - Original Message - From: Joe Gassen To: legacy-ornamental-mills@googlegroups.com Sent: Tuesday, February 28,

Re: A message form a new member

ethod of making multiple start spirals. -Tim - Original Message - From: "word7" To: "Legacy Ornamental Mills" Sent: Thursday, February 16, 2012 8:29 PM Subject: Re: A message form a new member Oh one more thing I think I would love to have a rotary table. A

Re: A message form a new member

uot;word7" To: "Legacy Ornamental Mills" Sent: Thursday, February 16, 2012 11:22 PM Subject: Re: A message form a new member I did figure out that the chain on the outside was just to speed up the rpm of headstock to leadscrew. The gears sere not engaged in that configuration. I

Re: A message form a new member

dyna-glide is the go i use it on every thing for lubriaction http://legacywoodworking.com/products.cfm?product=12 Bill - Original Message - From: "word7" To: "Legacy Ornamental Mills" Sent: Friday, February 17, 2012 3:22 PM Subject: Re: A message form a new m

Re: A message form a new member

> > keep us informed on the progress. > > C.A.G. > > >   - Original Message - > >   From: Joe Gassen > >   To: legacy-ornamental-mills@googlegroups.com > >   Sent: Wednesday, February 15, 2012 10:38 PM > >   Subject: Re: A message form a new member &

Re: A message form a new member

t;   To: legacy-ornamental-mills@googlegroups.com >   Sent: Wednesday, February 15, 2012 10:38 PM >   Subject: Re: A message form a new member > >   Adding a few more pics (didnt know if there was a file size limitation) > >     Joe > >     On Tue, Feb 7, 2012 at 10:40 PM,

Re: A message form a new member

n the progress. C.A.G. - Original Message - From: Joe Gassen To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, February 15, 2012 10:38 PM Subject: Re: A message form a new member Adding a few more pics (didnt know if there was a file size limitation) Joe O

Re: A message form a new member

o the Group. C.A.G. - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, February 16, 2012 12:55 AM Subject: Re: A message form a new member what a great old machine I love the steel rails unless there is problems I wouldn't

Re: A message form a new member

ruary 16, 2012 2:38 PM Subject: Re: A message form a new member Adding a few more pics (didnt know if there was a file size limitation) Joe On Tue, Feb 7, 2012 at 10:40 PM, Okla Mike (Liltwisted) wrote: oh how much wood could a wood chuck, chuck On 2/7/2012 10:

Re: A message form a new member

rd to guess without seeing a photo. Is it painted red or black? -Tim - Original Message - From: "Curtis" To: "Legacy Ornamental Mills" Sent: Tuesday, February 07, 2012 6:16 PM Subject: A message form a new member wordsmit...@gmail.com I own an older legacy mi

Re: A message form a new member

ginal Message - From: "Curtis" To: "Legacy Ornamental Mills" Sent: Tuesday, February 07, 2012 6:16 PM Subject: A message form a new member > wordsmit...@gmail.com > > I own an older legacy mill (pre Aluminum carriage) and need any > instructions or help I can ge

Re: A message form a new member

some body on here will fill you in in the meantime can you post a few pictures of it that will help identify it as well Bill - Original Message - From: "Curtis" To: "Legacy Ornamental Mills" Sent: Wednesday, February 08, 2012 1:16 PM Subject: A message form a ne

A message form a new member

wordsmit...@gmail.com I own an older legacy mill (pre Aluminum carriage) and need any instructions or help I can get. I have no documentation whatsoever and the mill has had a home built drive to long screw axis added. I dont know the model but it appears the capacity is just short of 96" measure

<    1   2   3