**
Note: This e-mail is subject to the disclaimer contained at the bottom
of this message.
**
:
That is a lot of log to fill up! Is there a chance tha
Hi Graham,
AMQ7469 Transactions rolled back to release log space
Explanation: The log space for the queue manager is becoming full. One
or more long-running transactions have been rolled back to release log
space so that the queue manager can continue to process requests.
User Response: Try to en
I will be out of the office starting 08/14/2002 and will not return until
08/26/2002.
I will respond to your message when I return.
Instructions for managing your mailing list subscription are provided in
the Listserv General Users Guide available at http://www.lsoft.com
Archive: http://vm.akh-
Hi,
We are facing a problem in with channels in the MQ explorer (WIN NT)
.Unable to see the channels there. But using MQMonitor we can see the
channels.
DISPLAY channel from DOS is working fine and displays all the channels.
The error shown on the explorer is "AMQ4082" RC 2136
Has anybo
I have a question regarding security for MQSeries V5.2 on Windows NT that I think may
apply to other platforms as well.
When MQSeries initiates a process in response to a trigger event, that process runs
under a certain userid (e.g., MUSER_MQADMIN under NT). The problem is, every
triggered ex
Hi Peter,
For the channel related problems:
In OS/390: When I was working in OS/390, I don't
remember the exact name but I think I would look at
the job named MQxxCHIN (as far as I remember, in your
test env. it is called MQ2TCHIN... Phil would know).
In the distrib. environment: Error logs...
I read this thread with interest as we have had problems recently with a queue
manager listener stopping unexpectedly at around 5AM. The listener is then
automatically restarted in about a minute, but our client applications are then
hung for up to 2 hours.
After reading through the emails and l
I don't think so. Many other applications are using it with no problems,
including this app, where 99% of the messages make it ok.
Any way to tell that the channel had temp problems and/or discarded a
message after the fact?
Peter Potkay
IBM MQSeries Certified Specialist, Developer
[EMAIL PROTE
Nonpersistent messages and a NPMSPEED of FAST can result in lost messages.
Greg Mabrito
I/T Asct Sys Prgrmr
IMS and MQ Software Support
(210)913-3985 D-03-E
IBM Certified Specialist - Websphere MQ
The opinions herein are solely Greg's and are not necessarily the opinion of
USAA.
-Original
The problem we are having is, during the installation of IBM MQ Series 5.2.1 during
the preparation wizard, right after it starts services it gives an error msg. The
Error msg is in a normal install window. It says:
"MQ Series configuration problem, MQSeries is not correctly configured for wi
We are getting this error while trying to check in a newly created message
flow.
BIP0068E An unexpected exception occurred:
java.lang.NullPointerException.
A java.lang.NullPointerException exception occurred but provided no
additional information.
Turn on Control Center tracing t
And there were no problems with those "fast" channels
when the messages were lost?
Ruzi
--- "Potkay, Peter M (PLC, IT)"
<[EMAIL PROTECTED]> wrote:
> Nope it's copied from the request, which set it to 3
> days.
>
> The log file confirms that the reply is being put
> with this large value.
>
>
>
Nope it's copied from the request, which set it to 3 days.
The log file confirms that the reply is being put with this large value.
Peter Potkay
IBM MQSeries Certified Specialist, Developer
[EMAIL PROTECTED]
X 77906
-Original Message-
From: DiLauro, Nick [mailto:[EMAIL PROTECTED]]
Sen
The reply could also be lost anywhere along the route if the expiry time has
been exhausted. Is this a possibility?
-Original Message-
From: Potkay, Peter M (PLC, IT) [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 14, 2002 10:02 AM
To: [EMAIL PROTECTED]
Subject: Lost MQ message (They
My customer's application is losing an occasional message and I can't figure
out why. Maybe someone has something else I can look at.
VB app client connects to QM1 to put a nonpersistent request message to a
remote queue pointing to Queue1 on QM2. Put is outside of syncpoint and the
Expiry is 3 d
Hi,
I have written a program called MQ Visual Edit. It is written in Java, hence,
it can run on many platforms. I am currently running a beta at version 0.2.
On the weekend, I will be packaging beta v0.3 and it will include editing
(String editing and hex editing). Note: Recognizing XML and e
Hello!
I am preparing for the 095 certification.
I have already seen the sample questionnaire
in IBM website.
I wonder if there are any other sample
questions around? Or any comprehensive list
of questions?
May be, those who have already faced it, can chip
in few questi
When installing MQ 5.3 on Win2000, using the Microsoft Software Installer,
I am using the silent install mode - i.e. using a response.ini file.
In the response file, does the KEEPMQDATA parameter override the LOGFOLDER
parameter? I tried to change the location of the log folder by using the
LOGFO
Title: C++ Foundation Classes
Pieter
-
No, if
connectively is lost sometime between the internal MQCONN call and the MQPUT
call, you will get back an appropriate error message - 2002? - but the classes
will not attempt to redrive the put call.
-
Steve
-Original Message-From: Voges
Palavesam:
Thanks for the input. Looks like I have a way to get message based on
Broswer option and Match CorrID option. Can I get all my messages (belong
to a given user ID)?
Thanks.
Jerry
Palavesam_Subbiah <[EMAIL PROTECTED]>@AKH-WIEN.AC.AT> on
08/13/2002 11:17:18 PM
Please respond to M
I am running a job that sends persistant messages to three remote
queues(sequentially). The queues are triggered. The application that reads
from the first queue gets triggered soon after all messages(3079) are
succesfully put on the queue. The application crushes after reading less
than 200 messa
Here is one very popular across our company:
http://www-3.ibm.com/software/ts/mqseries/txppacs/ms0h.html
Ruzi
--- Robert Broderick <[EMAIL PROTECTED]>
wrote:
> We use this all the time
>
>
http://www-3.ibm.com/software/ts/mqseries/txppacs/ih03.html
>
> b
Therer are a couple of things to tighten up the model and one configuration
attribute that can actually help.
First: After you receive your 2033 do you syncpoint and close the queue
immed? One of the conditions is if the Transaction is running and the queue
is open for I/O.
Second: In a situaion
hi listeners...
I am working on the below configuration of MQ...
* MQ V1.2 on OS/390
* Application running in CICS TS 1.3
The problem I am facing is with triggering.
We have established a trigger level of first and on this a
transaction gets triggered in CICS. The transactions processes
all me
Here is another by Dear Ole Paul!!
http://www-3.ibm.com/software/ts/mqseries/txppacs/mo71.html
bobbee
>From: Marc Siegert <[EMAIL PROTECTED]>
>Reply-To: MQSeries List <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: AW: Tool for Browsing MQ Qu
We use this all the time
http://www-3.ibm.com/software/ts/mqseries/txppacs/ih03.html
bobbee
>From: Marc Siegert <[EMAIL PROTECTED]>
>Reply-To: MQSeries List <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: AW: Tool for Browsing MQ Queues?
>Dat
Hi All,
Whenever I try to start the MQ queue manager with Oracle XA support enabled
on HP-UX I get the following error.
-
AMQ7626: XA resource manager initialization failure. Refer to the error log
for
more
Hi all
I'm trying to compile and link the c source code as generated by the MQ
Adapter Builder, but I can't find the libs to solve the following link
error:
unresolved external symbol _AQMRT_delete
I'm compiling and linking from Visual C++ 6
where is it? thanks
Francois van der Merwe
Instruc
>While using Version 4, we were told that it was good to run AMQIQEM4
>periodically.
>We had been running it monthly.
>Now that we are on Version 5.2, I see that the AMQIQEM4 does still exist.
>Should we continue to run this (after MQ is quiesced)?
>Are there any advantages/issues/concerns in doin
Absolutely!! Thanks for the correction Paul. What was
I thinking when I was typing (apparently not the issue
at hand...I guess ;-)
Ruzi
--- Paul Clarke <[EMAIL PROTECTED]> wrote:
> >> If no heartbeat packets are received within the
> >> Heartbeat check interval the
> >> receiver will assume an ou
Jan,
I can't answer all your questions but .
AMQ6118 is unexpected return code and the unexpected return code is AMQ6162
AMQ6161 is error reading the configuration data
Use 'mqrc' to view the messages, for example, mqrc AMQ6118
Looks like you may have something wrong with your INI file. Un
Hi Elli!
Try this. This is an IBM Support Pac and works fine!
regards Marc
P.S.: Wie geht's sonst so? Hochwasserkatastrophe?
-Ursprüngliche Nachricht-
Von: Flothmann, Eleonore [mailto:[EMAIL PROTECTED]]
Gesendet: Mi 14.08.2002 10:27
An: [EMAIL P
Title: Tool for Browsing MQ Queues?
Hi,
we are looking for a tool to browse mq queues. A special requirement is: in addition to simply show the messages in hex of string format this tool should be able to understand XML. If a message is in XML format the message should be presented in the ap
how do you enforce the browse option? the only options this node has is
input queue name,msgpath,data type,selemsgid,selectcorrelid and transaction
mode.
Wendy
- Original Message -
From: "Palavesam_Subbiah" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, August 14, 2002 8:17
Hi,
Could someone shed some light on this...
A channel was stopped because of a security exit setting
a 'SUPPRESS_FUNCTION' (on OS390) This has happened before & a channel
could be restarted.
On the Sun Solaris site I can find a 2195 (unexpected error) when
opnening a queue manager object (with
35 matches
Mail list logo