r you want, then copy it to /boot and
change lilo.conf to what you called your new kernel.
--
Ray Curtis Unix Programmer/Consultant Curtis Consulting
mailto:[EMAIL PROTECTED]http://www.clark.n
w I missed that, of course that would cause the
problem.
The only thing I find strange it that it only bombed on the one Image
and not all of them.
I just tested with one, and it always bombed with the error:
Fatal: No images have been defined.
So it didn't recoginize any of the images, not just one image.
geiscalled'
label = mynew
root = /dev/hda3
alias = mn
read-only
m and when i reboot, iam not able to see the mynew image that
m i added.
m any suggestions are welcome.
--
Ray Curtis Unix Programmer/Consultant Curtis Consulting
mailto:[EMAIL PROTECTED]
ly helpful, but I'm left uncertain whether
jb or not I need to rebuild the kernel. Thanks for any thoughts on how to get
jb this burner burning again.
Assuming wrote lilo again after adding the append line, just try a
'insmod ide-scsi' then do a lsmod and see if the module is loaded.
--
Ray Curti
com/mailman/listinfo/redhat-list
mm ___
mm Redhat-list mailing list
mm [EMAIL PROTECTED]
mm https://listman.redhat.com/mailman/listinfo/redhat-list
--
Ray Curtis Unix Programmer/Consultant Curtis Consulting
mailto:[EMAIL PROTECTED]
ip' module in RedHat's kernel rpm.
This is not the new Netgear FA-311TX, which is not supported yet ?
--
Ray Curtis Unix Programmer/Consultant Curtis Consulting
mailto:[EMAIL PROTECTED]http://www.clark.n
eric Mouse.
As root, try using 'mouseconfig' to change the mouse type.
--
Ray Curtis Unix Programmer/Consultant Curtis Consulting
mailto:[EMAIL PROTECTED]http://www.clark.n
se you can manually edit /etc/X11/XF86Config:
Section "Pointer"
Protocol"MouseSystems"
Device "/dev/mouse"
Make sure you have the link /dev/mouse - ttySX, make sure this is
the correct port for the mouse.
rm Ray Curtis wrote:
"rm" == R
XX.XXX.XXX --- local lan
in.ftpd: xxx.xxx.xxx.xxx ftp
or
in.ftpd: ALL
--
Ray Curtis Unix Programmer/Consultant Curtis Consulting
mailto:[EMAIL PROTECTED]http://www.clark.n
"k" == khosro [EMAIL PROTECTED] writes:
k .
kGreetings from a newbie!
k I downloaded "festival", the free speech synthesizer from the University
k of Edinburgh. Compiled it. When it started speeking its first words I
k
"dt" == David Taylor [EMAIL PROTECTED] writes:
dt Does anyone have a clue why the following may be happening?
dt error: xemacs-20.4-1.i386.rpm cannot be installed
dt When I try to install all of the xemacs files at once I get the
dt following:
dt error: xemacs-20.4-1.i386.rpm cannot be
"cf" == Chris Frost [EMAIL PROTECTED] writes:
cf I'm looking to get a very well supported pci network card for my linux box
cf (in the $40-$70 range). Are there any tulip-type cards that I could get?
You might take a look at the Dec Tulip cards 21140, the Netgear FA-310
is a good one and fit
"ctl" == Cory T Lamb [EMAIL PROTECTED] writes:
ctl For some reason it has it's own installation package in X11/utilities it
ctl is apache configurator or something close to that.
Try 'comanche'.
ctl On Tue, 23 Jun 1998, Dan
ctl Cornilescu wrote:
Michael Jinks wrote:
Cory T. Lamb
"mn" == Matt Nelson [EMAIL PROTECTED] writes:
mn a user on my system just reported a problem using mail(1) to delete
mn some at(1) logfiles. i use pine instead of mail(1), so i hadn't seen
mn the problem before. below is a sample of the problem:
mn man:mnelson mail
mn Mail version 8.1
8 Jun 1998, Ray Curtis wrote:
"de" == Doug Elznic [EMAIL PROTECTED] writes:
de Hello,
de I have two linux boxes I would like to backup over the network. One has
de he tape drive and the other has the data. They are both stock 5.0
de (intel) boxes.
NFS mount the machine th
"lb" == Leston Buell [EMAIL PROTECTED] writes:
lb Ray Curtis wrote:
I assume you are talking about adding lines to your startup
menu from the right mouse button, take a look at
/etc/X11/AnotherLevel/fvwm2rc.menus.m4 and copy it to your home
directory and rename it to .fvwm2rc.menu
"aw" == Aaron Walker [EMAIL PROTECTED] writes:
aw On the other end I have a TI TravelMate 5000 that is connected to the
aw 233 via a PLIP connection.
aw (I am using a 'Null Parallel Cable' aka 'LapLink')
aw So I booted with the boot disk on the TI then loaded the supplemental
aw disk and
"lb" == Leston Buell [EMAIL PROTECTED] writes:
lb Leston Buell wrote:
lb I have been trying to configure my X environment with only some success.I'm
lb running RH 5.0 and am using the Fvwm95 settings for AnotherLevel. I've had
lb some success by altering the Fvwm95 file in
"cw" == Chris Wegrzyn [EMAIL PROTECTED] writes:
cw I have been typing up a document in emacs for a while and find it
cw necessary to go to the end of lines. On windoze word processors, I can
cw just hit end or home and get to the start or end of a line. Is there any
cw way to set up Emacs so
"bl" == Borek Lupomesky [EMAIL PROTECTED] writes:
blHi all,
blElectric Eyes were advertised to be in RH 5.1, but they're nowhere to
bl be found. Are they only in commercial package?
Check out Gnome, actually it is part of the Gnome-graphics package.
-- Sir Edward Coke
"p" == pancho [EMAIL PROTECTED] writes:
p hi all
p where can I find docs for gnome?
p basically my question is : how do I start gnome?
Check out http://www.gnome.org for the FAQ and info.
But basicly try 'panel' to start the WM or you can call
any of the apps like 'ee' seperately.
--
"jb" == Jason Belich [EMAIL PROTECTED] writes:
jb after getting assorted uncompression errors with SO4sp3 both using the
jb wrapper and manually using tar -xvzf, I attempted to just gzip -d the
jb tarball and I get consistantly the error
jb invalid compressed data--crc error
jb I've dnlded
"g" == getrhd [EMAIL PROTECTED] writes:
g ##PRINTTOOL3## REMOTE ljet4 600x600 a4 {} LaserJet4 Default 1
g lp0:\
g :sd=/var/spool/lpd/lp0:\
g :mx#0:\
g :sh:\
g :rm=terrorist.math.ntu.edu.tw:\
g :rp=lp:\
g :if=/var/spool/lpd/lp0/filter:
This what your printcap
"sr" == Sim Robert [EMAIL PROTECTED] writes:
sr How come when I hit the "end" key in emacs, it goes to the end of
sr file rather than the end of line? Similar with the "home" key.
That is because that is the way it was built, however:
Start of Line = Ctrl-a
End of Line = Ctrl-e
Use the
"lb" == Leston Buell [EMAIL PROTECTED] writes:
lb Oh. Now i am just S close to being able to use Linux as a non-root
lb user. I did:
chmod a+s /usr/sbin/pppd
lb as you instructed, and now my dial-up works fine. But now i need to know
lb how to be able to use Netscape as a non-root.
"rf" == Russell Foster [EMAIL PROTECTED] writes:
rf Hi,
rf I've just downloaded 2.1.105.tar.bz2 and I just want to know how to I
rf use it. Have I downloaded the wrong version or don't I have the correct
rf tools. Anyhelp would be appreciated. TIA
This is the one of the very latest
"jrk" == Jordan R K [EMAIL PROTECTED] writes:
jrk I was wondering. Are S3 ViRGE /4mb or 2mb supported?
Yes
jrkHow about the newer Mitsumi CD-ROM's /like 16x or 24x ?
Can't say for sure but my guess would be yes, have you checked
the redhat supported-hardware ?
jrkAre there any problems
"r" == redhat [EMAIL PROTECTED] writes:
r I get the following error when I try to mount via NFS:
r mount clntudp_create: RPC: Program not registered
r Does anyone know what is causing that? It was working fine for a while,
r then all of a sudden it started giving me that message.
Check
"ip" == Igmar Palsenberg [EMAIL PROTECTED] writes:
"Igmar Palsenberg" [EMAIL PROTECTED] wrote:
Does Linux support 256MB RAM?
Linux supports up to 4 GIG of RAM.
ip Is there a MB that caches more than 256MB's of RAM ?
ip I've seen MB that cache 512MB. According to some people, there are MB
"jw" == Joel West [EMAIL PROTECTED] writes:
jw Is there a driver for the UMAX Page Scan Device scanner under Redhat 5.0?
Sane:
http://www.mostang.com/sane/
--
Curtis Consulting
mailto:[EMAIL PROTECTED]
http://www.clark.net/pub/ray
If love is the answer, could you
"pv" == Peter Vertes [EMAIL PROTECTED] writes:
pv Hello All !
pv For some reason I can't configure FetchMail properly. I have a login
pv name of "pvertes" on a remote server, but at home I use the name
pv "peti". Now when I'm at home and I try to get my mail with FetchMail
pv like this:
"ms" == Marco Shaw [EMAIL PROTECTED] writes:
ms OK...we need to have a search engine for the FTP archives?! I found
ms pgppine.xxx.rpm in some directory, and now I need to find the full
ms pgp.xxx.rpm program, but can't find it!!
ms Anyone smarter at searching than I? I'd appreciate knowing
This is also happening to me, I think this is happening to certain
people that has either responded to this person or somehow gotten on
our address's and spits back a reply to the list.
I have sent mail to both the postmaster and the person responsible for
this domain listed from the internic,
"wdm" == W D McKinney [EMAIL PROTECTED] writes:
wdm After installing 5.0 and throwing up the kernels I have this problem:
wdm /sbin/lilo -v
wdm LILO version 20, Copyright 1992-1997 Werner Almesberger
wdm Reading boot sector from /dev/sda
wdm Merging with /boot/boot.b
wdm Boot image:
"jmk" == James Michael Keller [EMAIL PROTECTED] writes:
jmk I got the wrapper for 4.0, I open up an xterm in X and try and rpm -Uvh
jmk the wrapper and it says that it can only be installed from X - but the X
jmk server is running ... what gives?
jmk Anyone got this thing to install?
Sure
"sna,c" == Smith, Nathan A , Capt [EMAIL PROTECTED] writes:
sna,c Ok,
sna,c I looked at the specs for the ASUS board (on thier web site) and all I could
sna,c see was up to 83 Mhz. How are you getting 373? I would love to see how you
sna,c did this (since I would love to try!!!).
You can't
"ip" == Iztok Polanic [EMAIL PROTECTED] writes:
ip Hello !!!
ip I'm currently using pppcosts to tell me how much I spent on Internet. But
ip are there any other text based online timers???
I don't know if this will help you or not, but I use it for my Bell
Atlantic telco, logging with a
"rs" == Richard Sharpe [EMAIL PROTECTED] writes:
rs Hi,
rs I tried compiling the 3.0.32 kernel with the IPChains stuff in it on my
rs Cyrix-based machine last night, and I got a rude shock.
rs The build failed with the following messages:
rs gcc: Internal compiler error: program cc1 got fatal
"dr" == Danny Rice [EMAIL PROTECTED] writes:
dr I was just using ~/temp/mbox to test if it could get this file because
dr it could not get /var/spool/mail/dwrice.
(setq vm-spool-files '("/var/spool/mail/LOGINNAME"
"ISP.DOMAIN:110:pass:LOGINNAME:PASSWORD"))
Of course change:
First
"dr" == Danny Rice [EMAIL PROTECTED] writes:
dr Why doesn't
dr (setq vm-spool-files '("/var/spool/mail/dwrice") )
dr work?
This doesn't tell it where to spool the messages from. Read the info
and FAQ on VM. I have links on my page {below} to some of this info.
dr I read the FAQ
"dr" == Danny Rice [EMAIL PROTECTED] writes:
dr I have a new RH 5.0 system going and am running xemacs 20.4.
dr In vm vm-get-new-mail is not getting new mail from spool. I am
dr getting no error message just "No new mail". I tried changing
dr vm-spool-files to (setq vm-spool-files
"mj" == Michael Jinks [EMAIL PROTECTED] writes:
mj Sometimes when I'm doing lots of reconfiguration on several machines, or
mj if it's been a while since I've tinkered with a particular box, it can
mj be easy to forget how a particular machine's kernel was configured. Is
mj there a way to get
"pg" == Paul Greene [EMAIL PROTECTED] writes:
pg At 12:33 AM 5/5/98 -0400, you wrote:
Big mistake, don't upgrade the complete libc just for
StarOffice this will break other things.
Check my website below for the info you need to
install staroffice.
--
Curtis Consulting
"sk" == Scott Kindley [EMAIL PROTECTED] writes:
sk Ray Curtis wrote:
This is a known problem and redhat needs to fix. Its a problem with
Glibc and should be fixed sometime in the future.
For the present why not just create a simple shell script to startup
BRU in which you set
"rc" == Ray Curtis [EMAIL PROTECTED] writes:
sk This didnt work:
sk [scottk@linux-serv scottk]$ export TZ=EDT
sk [scottk@linux-serv scottk]$ xbru
sk BRU: Unable to find/exec bru executable - ABORTING!!
sk [scottk@linux-serv scottk]$
rc This sounds like a path problem, the install o
Start with something simple, like make sure that you have a link in
/dev/modem pointing to the right device such as ttySX where the X is
either 0 for com1 or 1 for com2.
IOW, do this as root:
ln -s /dev/ttyS0 /dev/modem
Then call up minicom and issue the simple command atz and see if your
modem
Big mistake, don't upgrade the complete libc just for
StarOffice this will break other things.
Check my website below for the info you need to
install staroffice.
--
Curtis Consulting
mailto:[EMAIL PROTECTED]
http://www.clark.net/pub/ray
A visit to a fresh place will
"mr" == Mukhlesur Rahman [EMAIL PROTECTED] writes:
mr I am new entry here. And very new in Linux. I had a similar problem. My
mr modem could dial but always failed to connect to ISP. I tried to connect to
mr my office ISP and spent about a week fiddling with PPP setup and could not
mr succeed.
This is a known problem and redhat needs to fix. Its a problem with
Glibc and should be fixed sometime in the future.
For the present why not just create a simple shell script to startup
BRU in which you set the TZ=*DT then when it finishes set TZ=
to reset the TZ.
Or just open a shell and do
"cc" == Chuck Carson [EMAIL PROTECTED] writes:
cc Where is the cheapest place to get these routers? I haven't looked
cc in a while, the last I checked they were $800 a piece. I already have
cc a 3com IQ modem and with a high speed serial card, I have gotten
cc full usage from the circuit under
Or another package for a network is 'Amanda' which I find has some
really nice features Bru is missing such a plotting and network
backups. It also does incrementals along with full backups that can
be scheduled and much more.
Check out:
http://www.cs.umd.edu/projects/amanda/index.html
"dw" == Dave Wreski [EMAIL PROTECTED] writes:
Or another package for a network is 'Amanda' which I find has some
really nice features Bru is missing such a plotting and network
backups. It also does incrementals along with full backups that can
be scheduled and much more.
dw The network
"jake" == Jake Colman [EMAIL PROTECTED] writes:
jake I built a new kernel last night from the 2.0.32 sources on RH5. In addition to
jake enabling certain features and modules not provided with the RH5 pre-built
jake kernel, I also stripped out alot of things I knew I did not need. I built and
"jake" == Jake Colman [EMAIL PROTECTED] writes:
jake I built a new 2.0.32 kernel last night using unpatched sources and
jake built/installed modules.
jake 1) After rebooting, I tried pinging an internet host from win95 and got timeout
jakeerrors. Looking again at the command you had me
This is all very true about the redhat-list, however there are already
so many redhat lists, and the latest version is supposed to be discussed
on the hurricane-list even though many never got that message.
"bf" == Bunting Family [EMAIL PROTECTED] writes:
bf John C. Flohr wrote:
Linux is
"km" == Karl Miller [EMAIL PROTECTED] writes:
km Good $ENTER APPROPRIATE TIME NOMEN HERE, All!
km I'm getting an error trying to mount a CD in RH 4.2. I installed RH
km originally via FTP, so the CD was never utilized. Now, when I try to mount,
km I'm getting a
km mount:
"gh" == Gudbjorn Hreinsson [EMAIL PROTECTED] writes:
gh Hi folks,
gh If anyone can point me to a MIME capable mail processor, that
gh will let me extract info from a mail message and put in a file.
gh I've tried metamail from Bell lab's (the original UNIX MIME package
gh it seems) but it's
"rs" == Rich Shepard [EMAIL PROTECTED] writes:
rs To some degree, this is a common topic. HOWEVER, g this is a different
rs twist on the topic.
rs I have 96M RAM installed, so I added the following line to the kernel
rs stanza of lilo.conf:
rs append="ram=96M"
Try append="mem=96M"
"msd" == Michael S Dunsavage [EMAIL PROTECTED] writes:
msd [EMAIL PROTECTED] wrote:
Hi,
If I understand your question correctly, this is what you want to do: In
the "Screen" section, put the modes in the order you want them to come
up in; for example, this will cause 1024x768 to be the
"rg" == Ron Golan [EMAIL PROTECTED] writes:
rg I'm using RHL 5.0 and XFree86. The default window manager is fvwm2 which
rg starts up with a cyan4 background for the root window. I think I've
rg tracked down the lines in /etc/X11/Anotherlevel/fvwm2rc.init which are
rg # SetupFunction gets run
"i" == ISA [EMAIL PROTECTED] writes:
i But, and this one goes to the rest, I am also new to all this Unix-like
i environment
i and even though I know a few things about it, I sometimes find it harsh. So
i if anyone
i could tell me where can I find Docs on UNIX, (basic structure, the why of
i
"sh" == Steve Hazelett [EMAIL PROTECTED] writes:
sh Can anyone tell me how you get pipes to run as the screen saver in X? If
sh I manually type pipes I get a window with pipes running. What I would like
sh is to have pipes to be my screen saver when I start up X (startx). I'm
sh running RH
"bs" == Bryan Swann [EMAIL PROTECTED] writes:
bs I'm looking for a 100-tx network card. I see that RH supports the Intel
bs EtherExpress cards, but does this include the 100Mb version?
bs Can someone suggest a cheap 10/100 twisted pair network card that is
bs know to work? It would also be
"edt" == Eugene Dale Tyler [EMAIL PROTECTED] writes:
edt total:used:free: shared: buffers: cached:
edt Mem: 65581056 17104896 48476160 20381696 2461696 8929280
edt Swap:000
edt MemTotal: 64044 kB
edt MemFree: 47340 kB
edt MemShared:
"gt" == George Toft [EMAIL PROTECTED] writes:
gt Hi,
gt Has anyone had trouble running X when not root. As a non root user I
gt get a server crash with the following output (in its entirety) but no X:
gt -
gt Yes, I did. To cure it I had to delete some
"ll" == Larry Lade [EMAIL PROTECTED] writes:
So now I am looking for a better one. I was thinking of the Adaptec 2940
Ultra, but I am not sure it is the right choice. I also have an eye for the
Buslogic, but I am REALLY not sure which one to buy.
I have 2 SCSI-2 drives: 1 Seagate HD and 1
"mg" == Michael George [EMAIL PROTECTED] writes:
mg Hello all!
mg Even though I just have dial-up access to the net, I put "ALL: ALL" in my
mg /etc/hosts.deny file to keep intruding processes out. However, this also
mg keeps me from doing an rlogin or fetchmail from my machine back to my
"so" == Sam Ockman [EMAIL PROTECTED] writes:
so Ical (part of Red Hat) springs immediately to mind for managing your
so calendar. There are quite a few others as well. Try poking around
so sunsite.unc.edu.
Or there is also the calendar function already in Emacs, just another
reason to use
"ar" == Adoram Rogel [EMAIL PROTECTED] writes:
ar Dave Wreski wrote:
Well, the truth is that I do feel that I wasted the $50, and I am
disappointed.
I assume you meant do _not_ feel that you wasted the $50...
ar Actualy, I meant that I *do* feel that I wasted the $50, as I cant use
ar
"bt" == Bob Taylor [EMAIL PROTECTED] writes:
bt On Mon, 09 Mar 1998 23:29:37 -0500, Ray Curtis [EMAIL PROTECTED] writes:
If its not being written in your system logs, try adding the line:
to your chat script, something like:
REPORT CONNECT
ABORT BUSY ABORT VOICE ABORT '
If its not being written in your system logs, try adding the line:
to your chat script, something like:
REPORT CONNECT
ABORT BUSY ABORT VOICE ABORT 'NO CARRIER' '' ATZ OK ATD
"vs" == Victoria Stanfield [EMAIL PROTECTED] writes:
vs I asked this before when I was at Redhat 4.2 and was told
101 - 171 of 171 matches
Mail list logo
