Just download and built vim 7, but I can't see gvim ? But I do get a gui if I
launch vim -g
Thanks
V
==
Please access the attached hyperlink for an important electronic communications
disclaimer:
http://www.c
I've been using Vim with colorscheme evening, run in gnome-terminal set
to disallow bold text and to use the Rxvt colour palette, and it's been
working great for me.
So great, in fact, that now, when I want to give GVim a chance,
I can't stand its default interpretation of the even
I d/l'd and cofigured vim7.x (latest) as follows...
> ./configure --prefix=/vimpath --enable-gui
Should this enable gvim?
I did a make install, and
> cd /vimpath/bin
> ln -s vim gvim
When I start gvim, I get
E25: GUI cannot be used: Not enabled at compile time
What do I nee
GVim7 (Win32) crashes if I do the following:
" clean startup
:new
:tabnew
:call winnr("#")
" happens with or without 219 patches included
Andy
--
EOM
Doesn't work for some reason. But as I said vim -g works.
BTW what is the difference between gvim and vim -g ?
From: Linxiao [mailto:[EMAIL PROTECTED]
Sent: Tuesday 09 May 2006 22:42
To: Malhotra, Vijendra
Cc: vim@vim.org
Subject: Re: gvim
under Linux?
Are you under Linux?
then justmake installit
On 5/9/06, Malhotra, Vijendra <[EMAIL PROTECTED]> wrote:
Just download and built vim 7, but I can't see gvim ? But I do get a gui if I
launch vim -
On 2006-05-09, "Malhotra, Vijendra" <[EMAIL PROTECTED]> wrote:
> BTW what is the difference between gvim and vim -g ?
If vim and gvim are links to the same file, nothing.
Gary
--
Gary Johnson | Agilent Technologies
[EMAIL PROTECTED]
No they are not pointing to the same file. Now what is the difference
-Original Message-
From: Gary Johnson [mailto:[EMAIL PROTECTED]
Sent: Wednesday 10 May 2006 00:44
To: vim@vim.org
Subject: Re: gvim
On 2006-05-09, "Malhotra, Vijendra" <[EMAIL PROTECTED]> wrote:
&
On 5/10/06, Malhotra, Vijendra <[EMAIL PROTECTED]> wrote:
No they are not pointing to the same file. Now what is the difference
No difference at all. :-)
if (get_file_name_without_path(argv[0]) == "gvim")
launch_the_graphical_frontend();
else
launch_the_ncurses_tex
Quoting "Malhotra, Vijendra" <[EMAIL PROTECTED]>:
> No they are not pointing to the same file. Now what is the difference
>
> -Original Message-
> From: Gary Johnson [mailto:[EMAIL PROTECTED]
> Sent: Wednesday 10 May 2006 00:44
> To: vim@vim.org
>
On 2006-05-10, "Malhotra, Vijendra" <[EMAIL PROTECTED]> wrote:
> Gary Johnson [mailto:[EMAIL PROTECTED] Sent Wednesday 10 May 2006 00:44
> > On 2006-05-09, "Malhotra, Vijendra" <[EMAIL PROTECTED]> wrote:
> >
> > > BTW what is the differenc
I've been a long-time user of vi editors on Windows (lemmy and an older
version of vim) and now am looking for a vi editor for Windows that supports
the Unicode encodings (such as UTF-8, UTF-16, etc.)
So I installed the latest gvim, version 7, but am disappointed that on my
system at
Shot (Piotr Szotkowski) wrote:
I've been using Vim with colorscheme evening, run in gnome-terminal set
to disallow bold text and to use the Rxvt colour palette, and it's been
working great for me.
So great, in fact, that now, when I want to give GVim a chance,
I can't st
first
set gui=NONE and then set gui=reverse again.
Well, I really HATE the way to do that since it seems to be a "dirty" and
"hacked" way, but unfortuanately it is the only way for gvim now, I
strongly hope the next Vim version will have a much "clean" way to di
Hi A.J.Mechelynck, you wrote:
>
> 3. replace the arguments of guibg= and guifg= by their #RRGGBB hex
> equivalents from the rxvt color palette. What these equivalents are, I
> don't know; but you can set any 32-bit color that way. If you want it to
> be usable (without dithering) on a 256-color t
[EMAIL PROTECTED] wrote:
I d/l'd and cofigured vim7.x (latest) as follows...
./configure --prefix=/vimpath --enable-gui
Should this enable gvim?
I did a make install, and
cd /vimpath/bin
ln -s vim gvim
When I start gvim, I get
E25: GUI cannot be used: Not enabled at compile time
ing for X11/SM/SMlib.h
...
I see now what I don't have GUI support. But how do I enable it?
>-Original Message-
>From: Theerasak Photha [mailto:[EMAIL PROTECTED]
>Sent: Tuesday, February 20, 2007 12:25 PM
>To: Fouts Christopher (QNA RTP PT PREV)
>Subject: Re: En
t;From: Fouts Christopher (QNA RTP PT PREV)
>Sent: Tuesday, February 20, 2007 12:54 PM
>To: [EMAIL PROTECTED]; vim@vim.org; [EMAIL PROTECTED]
>Subject: RE: Enabling gvim?
>
>I did a several gui options
>
>> ./configure --prefix=/vimpath --enable-gui=auto ./configure
>
From: Fouts Christopher (QNA RTP PT PREV)
>Sent: Tuesday, February 20, 2007 12:59 PM
>To: Fouts Christopher (QNA RTP PT PREV); [EMAIL PROTECTED];
>vim@vim.org; [EMAIL PROTECTED]
>Subject: RE: Enabling gvim?
>
>I have an older version compiled with GUI, so I know it CAN be
>
[EMAIL PROTECTED] wrote:
I d/l'd and cofigured vim7.x (latest) as follows...
./configure --prefix=/vimpath --enable-gui
Should this enable gvim?
I did a make install, and
cd /vimpath/bin
ln -s vim gvim
When I start gvim, I get
E25: GUI cannot be used: Not enabl
It's in HPUX, and 10.20 at that. but I'll try your
--with-features option.
>-Original Message-
>From: Charles E Campbell Jr [mailto:[EMAIL PROTECTED]
>Sent: Tuesday, February 20, 2007 1:52 PM
>To: Fouts Christopher (QNA RTP PT PREV)
>Cc: vim@vim.org
&g
ary 20, 2007 2:21 PM
>To: [EMAIL PROTECTED]
>Cc: vim@vim.org
>Subject: RE: Enabling gvim?
>
>It's in HPUX, and 10.20 at that. but I'll try your
>--with-features option.
>
>>-Original Message-
>>From: Charles E Campbell Jr [mailto:[EMAIL PROTECTE
[EMAIL PROTECTED] wrote:
Ok, how do I tell ./configure where X11 include/lib
dirs are? I tried the --x-includes=DIR and
--x-libraries=DIR to no avail. Seems like it can't
find them so it throws away gui support.
Do you have the _header_ files for _compiling_ with X11 installed? On my
system
to bring the original
source up to patch level 66, but that should have no effect on being
able to build a GUI version.
Note also that --prefix and --enable-cscope shouldn't affect your
build, but it may be necessary to use --with-tlib=curses in order to
use a color terminal.
>-Original Message-
>From: Ryan Phillips [mailto:[EMAIL PROTECTED]
>Sent: Tuesday, February 20, 2007 4:25 PM
>To: Fouts Christopher (QNA RTP PT PREV)
>Cc: vim@vim.org
>Subject: Re: Enabling gvim?
>
>[EMAIL PROTECTED] said:
>> I d/l'd and c
(snip)
>
>Ok thanks. Looks like we don't have the X11/Motif libraries,
>which I've used before. Someone else configured this machine.
>
>-chris
Actually we have the Motif libs, but I can't find the include
files.
-chris
Hi!
On Sun, 25 Mar 2007, Andy Wokula wrote:
> GVim7 (Win32) crashes if I do the following:
>
> " clean startup
> :new
> :tabnew
> :call winnr("#")
>
> " happens with or without 219 patches included
Same here for the Linux (amd64) console version. Throws a core.
If need be I can do a gdb "bt"
Andy Wokula wrote:
> GVim7 (Win32) crashes if I do the following:
>
> " clean startup
> :new
> :tabnew
> :call winnr("#")
>
> " happens with or without 219 patches included
I can reproduce it. Will be fixed soon.
--
If an elephant is left tied to a parking meter, the parking fee has to be p
Andy Wokula wrote:
GVim7 (Win32) crashes if I do the following:
" clean startup
:new
:tabnew
:call winnr("#")
" happens with or without 219 patches included
Andy
also on Linux with gvim 7.0.219 called as "gvim -N -u NONE" and also when
replacing ":call
Does anyone have experience with running gVim and using Cygwin commands (ex.
indent)? I would prefer not to run vim in a Cygwin terminal, unless someone
has all of the configurations needed (syntax highlighting, etc) to have that
act like gVim.
Thanks,
Bill
I am sorry to ask such a stupid question, but I'm really puzzled.
I have been using vim for ages now, and for some tasks, not always, I prefer a
GUI. I use a Mandriva Linux distribution and it's all right.
Suddendly the menu bar (not the toolbar with icons, the menu bar with texts:
File, Edit, an
hi,
I just started using gvim. Is there any way to get pan-scrolling (Ctrl +
right mouse drag) as in NEdit?
Thanks a lot
Craig
I've used gvim with gnome for some time.
Now when i try to open a file with right click in the file nautilus'
icon, open with gvim. I get:
Erreur détectée en traitant BufReadCmd Auto commandes pour "file://*":
error detected treating BufReadCmd Auto commandes for "file
Hi All,
I am basically a VHDL/verilog guy.
But my team has fresh verification engineers who will be using c a lot.
I want to know the useful plugins and any other important aspects, when
using gvim for editing C/C++
As far as I know and searched -
I could get
c.vim -- plugin for gvim
ctags
I recently grabbed an updated gvim binary (7.0 with patches 1-110)
from the cream sf site and now gvim closes without warning whenever I
try to open a .vim script. It seems to have something to do with
syntax highlighting:
$ gvim -u NONE -U NONE
:filetype on
:e foo.vim
:redir > vim.txt
On sobota 27 styczeń 2007, vim@vim.org wrote:
> (it appears gvim assumes the documents are ISO-8859 encoded.) In
> addition, in the documentation and menus, I see nothing mentioned about
> Unicode, UTF-8 encoding, etc.
:help utf-8
:help unicode
m.
Jon Noring wrote:
I've been a long-time user of vi editors on Windows (lemmy and an older
version of vim) and now am looking for a vi editor for Windows that supports
the Unicode encodings (such as UTF-8, UTF-16, etc.)
So I installed the latest gvim, version 7, but am disappointed that
On Fri 26-Jan-07 4:17pm -0600, Jon Noring wrote:
> In addition, in the documentation and menus, I see nothing
> mentioned about Unicode, UTF-8 encoding, etc.
Hmm, if I simply type (in 7.0.188):
:helpg \
In my gvim under linux, I can't run a background process but I can do
so in vim. I remember I can do it in gvim under windows. What would
be the possible cause of that? Thanks.
ve
the "latin1" encoding of some files unchanged. What I do is:
1. open gvim
2: set encoding=latin1
3: e: filename.txt
4. work and save the file, that this way remains in its original encoding.
OR
:e ++enc=latin1 filename.txt
Question:
Is there any difference among the two systems?
s (e.g. LyX) I must leave
the "latin1" encoding of some files unchanged. What I do is:
1. open gvim
2: set encoding=latin1
3: e: filename.txt
4. work and save the file, that this way remains in its original encoding.
OR
:e ++enc=latin1 filename.txt
Question:
Is there any difference
Im on a windows machine and the choice of fonts to use is VERY
limited, is there a way to use any true type font i have installed on
the machine?
Is it possible for gvim to do the same thing as white room?
http://www.hogbaysoftware.com/product/writeroom
it seems like it wouldnt be too hard
1) full screen
2) text centered (like the screenshots in the the URL above)
Hi,
I'm running Ubuntu 6.10 on a PowerBook 4 under GNOME. Is there any
command I can put inn my .gvimrc that will maximize the window at
startup? I tried:
:autocmd GUIEnter * simalt
But simalt does not work in Linux.
I may not know much about GUIs but ever one I read so far has an API
c
Hello,
I'm using the 'dwm' window manager in "tiled layout," which enforces a
fixed-size window. http://www.suckless.org/wiki/dwm
Using gtk+ gvim 7.0.122, with some combinations of guifont and
guioptions settings, the vim command line ends up half-outside its
When on FedoraCore, I can build gvim whenever I want and I
can install needed dependencies (*-devel).
But debian-derived distros are not nice to me ... on the
debian-derived distro (mepis), trying to install libgtk for building gvim
I got into trouble that I don't know how to solve:
Waters, Bill wrote:
Does anyone have experience with running gVim and using Cygwin commands (ex.
indent)? I would prefer not to run vim in a Cygwin terminal, unless someone
has all of the configurations needed (syntax highlighting, etc) to have that
act like gVim.
Thanks,
Bill
Running
Cc to list. Next time, please use bottom-posting or inter-posting in
preference to top-posting, and "Reply to All" or "Reply to List" in preference
to "Reply to Sender".
ben lieb wrote:
I've had no real problems.
I use cygwin. I type 'startx'
Waters, Bill wrote:
Does anyone have experience with running gVim and using Cygwin commands (ex.
indent)? I would prefer not to run vim in a Cygwin terminal, unless someone
has all of the configurations needed (syntax highlighting, etc) to have that
act like gVim.
I generally compile
On 2007-03-30, Charles E Campbell Jr <[EMAIL PROTECTED]> wrote:
> Waters, Bill wrote:
>
> > Does anyone have experience with running gVim and using Cygwin commands
> > (ex. indent)? I would prefer not to run vim in a Cygwin terminal, unless
> > someone has al
Charles E Campbell Jr wrote:
Waters, Bill wrote:
Does anyone have experience with running gVim and using Cygwin
commands (ex. indent)? I would prefer not to run vim in a Cygwin
terminal, unless someone has all of the configurations needed (syntax
highlighting, etc) to have that act like
> -Original Message-
> From: A.J.Mechelynck [mailto:[EMAIL PROTECTED]
> Sent: Friday, March 30, 2007 6:42 PM
> To: Charles E Campbell Jr
> Cc: Waters, Bill; vim@vim.org
> Subject: Re: gVim and Cygwin
>
> Charles E Campbell Jr wrote:
> > Waters, Bill wro
On 2007-03-30, David Fishburn <[EMAIL PROTECTED]> wrote:
>
> > -Original Message-
> > From: A.J.Mechelynck [mailto:[EMAIL PROTECTED]
> > Sent: Friday, March 30, 2007 6:42 PM
> > To compile a Unix-like "Vim for Cygwin" you must use the
> > top-level Makefile or the src/Makefile which wil
Waters, Bill wrote:
Does anyone have experience with running gVim and using Cygwin commands (ex.
indent)? I would prefer not to run vim in a Cygwin terminal, unless someone
has all of the configurations needed (syntax highlighting, etc) to have that
act like gVim.
Thanks,
Bill
I do
David Fishburn wrote:
-Original Message-
From: A.J.Mechelynck [mailto:[EMAIL PROTECTED]
Sent: Friday, March 30, 2007 6:42 PM
To: Charles E Campbell Jr
Cc: Waters, Bill; vim@vim.org
Subject: Re: gVim and Cygwin
Charles E Campbell Jr wrote:
Waters, Bill wrote:
Does anyone have
On 30-Mar-2007 21:23, A.J.Mechelynck wrote:
OTOH, since (IIRC) builds of Vim available on the Cygwin site are
usually console builds, to get a Cygwin/X11 build of gvim you would
have to compile it yourself.
Actually, an X11 gvim *is* available using Cygwin's setup.exe. It's not
> -Original Message-
> From: Waters, Bill [mailto:[EMAIL PROTECTED]
> Sent: Friday, March 30, 2007 18:06
> To: vim@vim.org
> Subject: gVim and Cygwin
>
>
> Does anyone have experience with running gVim and using
> Cygwin commands (ex. indent)? I would pr
Robert Schols wrote:
[...]
I use the UnxUtils package:
http://unxutils.sourceforge.net/
It includes all of the commands I need and accepts forward slashes as
well as backslashes. I use these commands from the standard precompiled
gvim.exe from vim.org.
I have cygwin as well, but it is later in
i recently upgraded from vim 6.3 to vim 7.0 on RHEL 4. i also enabled gvim
with vim7.
using gvim, i get the following error:
"Scanning tags.
E15: Invalid expression:
substitute(v:fname,'s$','','g')substitute(v:fname,'s$','','g')
sorry all,
i just realized i had a bum statement in my gvimrc file.
please disregard previous email.
i recently upgraded from vim 6.3 to vim 7.0 on RHEL 4. i also enabled gvim
with vim7.
using gvim, i get the following error:
"Scanning tags.
E15: Invalid expression:
substitute(v:
Guido Milanese <[EMAIL PROTECTED]> 写于 2007-04-16 05:08:14:
> I am sorry to ask such a stupid question, but I'm really puzzled.
> I have been using vim for ages now, and for some tasks, not always,
> I prefer a
> GUI. I use a Mandriva Linux distribution and it's all right.
> Suddendly the menu bar (
Solution: Avail yourself of a different Vim executable, or compile it yourself.
Hypothesis 2a: You have installed a Vim version which is powerful enough, but
you are not using it.
How to check: (1) Same as hypothesis 2 above. (2) In the shell (e.g. in bash):
which -a gvim
hey there all,
is there a way i can permanently set the font for gvim ?
i can't find a config file for it.
thanks
On Monday 16 April 2007 03:18, [EMAIL PROTECTED] wrote:
> Will the :se go+=g
> show your menu?
Thanks a lot. No success!
g
---
Guido Milanese
http://www.arsantiqua.org
Hi:
I'm dumping text into gvim from an external program via a callback
function that I register for with the python interface. This callback
happens frequently and asynchronously with vim operation. Whenever I
try to run the external program, after receiving just a few lines of
dumped te
Occasionally when I press ALT+W,X
I get some errors in the command line
E316: ml_get: cannot find line 1
Press ENTER or type command to continue
E316: ml_get: cannot find line 9
E316: ml_get: cannot find line 1
Press ENTER or type command to continue
E316: ml_get: cannot find line 1
Press ENTER
I hope this is the right place to post such a
question. If it is not, my apologies. What
determines whether gvim has the top file menu or not?
I can run the exact same version/build of gvim on two
different machines. One displays the menu and the
other does not. I'm sure it
is somethi
I've just had to reinstall vim after a crash of X on my Debian system
(Sid)
Vim reads its .vimrc file correctly but gvim does not read .gvimrc.
Instead it seems to be reading some other configuration file with
different mappings and the wrong font. I cannot source my gvimrc file,
even wi
Just a minor bug. It may not be fixable I am not sure. But I run GVim
with 'set mouse=' (i.e. mouse completely disabled). However, if the
mouse hovers over the statusline of a split window it still changes to
the <--> resize cursor.
As I said it is a very minor thing but thought
I have the following mappings that work fine on vim but don't on gvim any idea
why
" Window manipulation
"Ctrl left == Ctrl W l
map ^[Oc ^Wl
" Ctrl left
map ^[Od ^Wh
" Ctrl+Down == Ctrl-W + j
map ^[Ob ^Wj
" Ctrl+Up == Ctrl-W + k
map ^[Oa ^Wk
Gabriel B. wrote:
I've used gvim with gnome for some time.
Now when i try to open a file with right click in the file nautilus'
icon, open with gvim. I get:
Erreur détectée en traitant BufReadCmd Auto commandes pour "file://*":
error detected treating BufReadCmd Auto
On 8/30/06, A.J.Mechelynck <[EMAIL PROTECTED]> wrote:
Gabriel B. wrote:
> I've used gvim with gnome for some time.
>
> Now when i try to open a file with right click in the file nautilus'
> icon, open with gvim. I get:
>
> Erreur détectée en traitant Bu
Gabriel B. wrote:
On 8/30/06, A.J.Mechelynck <[EMAIL PROTECTED]> wrote:
Gabriel B. wrote:
> I've used gvim with gnome for some time.
>
> Now when i try to open a file with right click in the file nautilus'
> icon, open with gvim. I get:
>
> Erreur détectée en
Hello!
If I hit K in normal mode, then I get man page for the word I'm in. But
in gvim this does not quite work. First I get the warning "Terminal is
not fully functional", and then comes the man page with formatting like
this
[1mSYNOPSIS[0m
[1m#include [0m
[1m
SHANKAR R-R66203 wrote:
Hi All,
I am basically a VHDL/verilog guy.
But my team has fresh verification engineers who will be using c a lot.
I want to know the useful plugins and any other important aspects, when
using gvim for editing C/C++
As far as I know and searched -
I could get
c.vim
ortant aspects, when
using gvim for editing C/C++
As far as I know and searched -
I could get
c.vim -- plugin for gvim
ctags/cscope -- tag generator.
Any other important feature/plugin/tool one need to know for editing C,
please let me know.
Thanks and Regards,
Shankar
From: "Greg Dunn", Wed, October 04, 2006 1:51 pm
>
> I recently grabbed an updated gvim binary (7.0 with patches 1-110)
> from the cream sf site and now gvim closes without warning whenever
> I try to open a .vim script. It seems to have something to do with
> syntax hig
On 10/4/06, Steve Hall <[EMAIL PROTECTED]> wrote:
From: "Greg Dunn", Wed, October 04, 2006 1:51 pm
>
> I recently grabbed an updated gvim binary (7.0 with patches 1-110)
> from the cream sf site and now gvim closes without warning whenever
> I try to open a .v
[cross-posting to connect threads]
On Thu, 2006-10-05 at 10:04 +1000, Robbie Gates wrote:
> Hi All,
>
> i was having problems with gvim hanging when i tried to edit my
> vimrc.
>
> After a bit of sleuthing, i tracked it down to has("tcl") hanging
> (called from sy
On 10/4/06, Steve Hall <[EMAIL PROTECTED]> wrote:
[cross-posting to connect threads]
On Thu, 2006-10-05 at 10:04 +1000, Robbie Gates wrote:
> Hi All,
>
> i was having problems with gvim hanging when i tried to edit my
> vimrc.
>
> After a bit of sleuthing, i tra
From: "Greg Dunn", Thu, October 05, 2006 9:36 am
> On 10/4/06, Steve Hall wrote:
> > On Thu, 2006-10-05 at 10:04 +1000, Robbie Gates wrote:
> > >
> > > i was having problems with gvim hanging when i tried to edit my
> > > vimrc. After a b
Hi ,
I was having problem with cut-paste selections from X <-> Windows
for gvim (6.2) , and this is the reply I got from the RealVNC team .
So is there a way to solve this in gvim ?
Thanks in advance !
-Ujjal
-- Forwarded message --
From: James Weatherall <[EMAIL
Yup, I can confirm it too. I'm in Windows with cygwin and command
:echo has("tcl") crashes gvim. :)
On 10/5/06, Steve Hall <[EMAIL PROTECTED]> wrote:
From: "Greg Dunn", Thu, October 05, 2006 9:36 am
> On 10/4/06, Steve Hall wrote:
> > On Thu, 2006-
Hi,
I'm doing a reinstall of gvim and placing my color and font setting in a
seperate file in the plugin.
This file is located in: "C:\Program Files\Vim\vimfiles\plugin"
And it contains the following:
[START OF FILE]
:hi Commentctermfg=darkgreen gui=None guifg=darkgree
Hi,
I'm trying to diff two files in (portable) gvim
I have two files opened in two vertical windows.
(Kind of Winmerge screen setup)
When I type :diff I get the error
E97: Can not create diffs
Why is that?
When I type :verbose
I dont get more info
Rgds,
Simon Jackson wrote:
Im on a windows machine and the choice of fonts to use is VERY
limited, is there a way to use any true type font i have installed on
the machine?
Gvim can only use fixed-width fonts. Some fixed-width fonts (such as Courier
New) are TrueType or OpenType, and can be used
* Simon Jackson <[EMAIL PROTECTED]> [2007-02-20 01:04]:
> Im on a windows machine and the choice of fonts to use is VERY
> limited, is there a way to use any true type font i have installed on
> the machine?
I think vim can only deal with monospaced fonts. And I really don't
think that proportinal
On 2/19/07, Simon Jackson <[EMAIL PROTECTED]> wrote:
Im on a windows machine and the choice of fonts to use is VERY
limited, is there a way to use any true type font i have installed on
the machine?
If you are looking for high-quality, free (as in beer) fonts for
programming, the following will
Simon Jackson wrote:
Is it possible for gvim to do the same thing as white room?
http://www.hogbaysoftware.com/product/writeroom
it seems like it wouldnt be too hard
1) full screen
2) text centered (like the screenshots in the the URL above)
1) full-screen is easy:
set lines=9
r one I read so far has an API
call that maximizes the window. So, what's the best way to do this?
The portable way to maximize gvim at startup (well, with maybe at times a
one-character-cell rounding error in the size of the Vim screen) is
if has("gui_running")
A.J.Mechelynck wrote:
The portable way to maximize gvim at startup (well, with maybe at times
a one-character-cell rounding error in the size of the Vim screen) is
if has("gui_running")
set lines= columns=
endif
The above (which is in my .vimrc) used to work
On 3/13/07, Mr. Shawn H. Corey <[EMAIL PROTECTED]> wrote:
Why it's there a command to simply maximize the window?
Because it's managed by the window manager, not by the app itself. You
may be able to set the size to what your screen is able to display,
but I don't think you'll be able to "really
What you may want to do is look into your GNOME documentation. Most
window managers have options on what to do with certain apps when they
run. For instance I have firefox load in one virtual desktop, and I
have amaroK load in another, and I have eclipse run fullscreen.
Surely there are options
fREW wrote:
What you may want to do is look into your GNOME documentation. Most
window managers have options on what to do with certain apps when they
run. For instance I have firefox load in one virtual desktop, and I
have amaroK load in another, and I have eclipse run fullscreen.
Surely there
François Ingelrest wrote:
Because it's managed by the window manager, not by the app itself. You
may be able to set the size to what your screen is able to display,
but I don't think you'll be able to "really" maximize the window.
Yes, but I thought there is a command in the window manager API
Mr. Shawn H. Corey wrote:
A.J.Mechelynck wrote:
The portable way to maximize gvim at startup (well, with maybe at
times a one-character-cell rounding error in the size of the Vim
screen) is
if has("gui_running")
set lines= columns=
endif
The above (whic
Mr. Shawn H. Corey wrote:
> François Ingelrest wrote:
> >Because it's managed by the window manager, not by the app itself. You
> >may be able to set the size to what your screen is able to display,
> >but I don't think you'll be able to "really" maximize the window.
>
> Yes, but I thought there i
but I thought there is a command in the window manager API that
allowed an application to make a request to maximize the window.
Maybe there is, yet even if there is, it doesn't mean that gvim takes
advantage of it. In particular, and in constrast with M$-Windows, under X
there are many poss
Mr. Shawn H. Corey <[EMAIL PROTECTED]> words
on 13.03.2007 - 09:28 (-0400 Zulu-Time):
> I'm running Ubuntu 6.10 on a PowerBook 4 under GNOME. Is there any
> command I can put inn my .gvimrc that will maximize the window at
> startup? I tried:
>
> :autocmd GUIEnter * simalt
>
> But s
GNOME resets it to what it was at the
last close.
I will look in the documentation to see if I can find something but I
expect it to be a long time.
Gvim compiled with GNOME support (which is not the default: a configure option
is required) transparently restarts its latest session, with
1 - 100 of 466 matches
Mail list logo